Error in RSA5
Hi,
I have a problem.
i try to enhance 0figl_4 data source using append option when activated it is given me an error message.
closed the screen and run again rsa6 and duble click on data source it is given me an error so i delete the datasource and try to activate the datasource. now the situation is i'm not able to activate the data source.
source system is ECC6, is there any way fix extract structure and activate the data source,
please help me to fix this problem.
Thanks.
Pria
Hi,
Thanks for reply, when i activated through RSA5 it is show me display logs.
Generating datasource 0figl_4.
Event with errors Extract in datasorce 0figl_4
is there any table to check the extractor.
Please help me to fix this problem as soon as possible,
Thanks
Similar Messages
-
Hi,
WHEN I go to RSA 5 SAP R/3>Lo> Access any of the master data object eg:-0material_attr giving the followingerror
DataSource 0MATERIAL_LGEN_HIER; switch to package ROMD is offHi Priya,
In RSA5, u can assign the datasource to any package or u can leave there and can reassign in RSA6. First goto RSA6 and see whether its available there or not ? If it is available u can change or assign to any package by clicking object directory button.
U can do it for 0MATERIAL_LGEN_HIER also..
Hope it helps...
Regards,
ARK
Message was edited by:
abc abc -
Error: No valid application component hierarchy exists in RSA5
Hi Gurus,
We have recently installed SAP R/3 for BW. when i get in to RSA5 i am getting error message "no valid application component hierarchy exists" . Do i need to do any settings here. When click enter later on, i can see all the data sources under new_hier_root.
And under new_hier_root i have unassinged notes
New_Hier_root -> unassigned notes -> application components.
Thanks in Advance,
JameelJameel,
first we need to transfer application hierarchy.
try this one SBIW>Business Content DS>Transfer Application Component Hierarchy or RSA9.
Hope this help.
Regards,
Nagesh Ganisetti. -
Data source activated in RSA5 but error in RSA3
Hi,
I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction Message no. RJ012").
Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
Thanks
ArunavaBhanu,
Thanks again for your super fast reply. This really solved my issue.
However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
I would really really appreciate.
Thanks
Arunava -
Error While Activating the Data Source in RSA5 T-Code
Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar. -
Error while trying to activate R/3 datasource from BI with T-Code rsa5
hi all,
i want to activate a particular datasource in R/3 through BI.iam following the below steps.
RSA1-->source system>select source system>right click>connection parameters>remote logon>rsa5-select datasource.
when iam trying to activate from rsa5 its giving error like "No valid application component hierarchy exists".when iam trying continue in next window its showing a tree "NONODESCONNECTED" and iam unable to see tree "SAP".
actually am i following the right procedure, if not guide me. please guide me how to solve this issue.
thanx®ards
Vamshi D KrishnaHi Vamshi,
Just carry on with your dats source. Ignore warning messages.
hope this will help you......
Thanks,
Vijay.
Edited by: vijay m on Jun 8, 2009 6:45 PM -
Hi, expert.
When I use TCODE RSA5 to active datasource in R3,in the end I got this error:
DataSource 0WBS_ELEMT_USR_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off
Message no. R8371
my R3 and BW are the same client.
I don't know how to correct it. PLZ help me, thank you very much.
Edited by: Bruce Wang on Dec 22, 2009 9:36 AMHi
I think u need to install package related to EHP3.
For more details :
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/installation-of-ehp3-3136634
http://www.google.co.in/search?hl=en&q=EHP3inSAP+R%2F3&btnG=Search&meta=&aq=f&oq=
Regards
Ram. -
Active BC DataSource Error: RSA5, R8371
Hello friends,
Platform: BI 7.0 ECC6 and BC703
Error info: DataSource 0HE_SLC_MBK_1; switch to package PMIQBW_E is off Message no. R8371
Operation: When Active the Business Content DataSource Higher Education & Research (Technical name: 0IS_HER ) in R3 via RSA5, I got this error message.
Thanks
JonasHi Jonas,
Try to follow steps in the below document
Link:https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
Cheers,
Tanish. -
Runtime error while activating LO Datasource in Source System
Hi Gurus,
I have followed the below steps to activate the SD related LO extractor in ECC
1. RSA5 --> Select all the 2LIS_11,12&13 data source and activate
2. LBWE --> Choose the 2LIS_11,12&13 data source and activate.
Upon execution of the second step , the system return me the following runtime error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Date and Time 07.07.2011 10:14:29
Short text
Inconsistency in the Dictionary for the structure "MCQALSB".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLMCEX" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
There is an internal system error.
eliminated with ABAP/4.
Trigger Location of Runtime Error
Program SAPLMCEX
Include LMCEX$04
Row 26
With this error i cant proceed to activate any of the LO data source
Please help
Thanks in advanceThe table MCQALSB need to be activated in SE11 and LBWE works fine
-
Internal error when try to display Interactive Report
Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
LukaszHi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz -
Dear All,
While creating transfer or update rule the following error occurs -
"DataSource COMPLEX does not exist in source system SANTANU of version A"
here COMPLEX = Data Source
SANTANU = Source System
Where as I have already defined Data Source Complex under Source System Santanu.
Thanks and Regards
SantanuHi snato,
check in the Source system
Use Tcode RSA6 in source system.
If the data source is in active state it will displayed there.
If not active ,you can use RSA5 Tcode to activate it if the datasource.
Use extractor checker to see if the datasource extracts any data from R/3
Goto T-code RSA3 in sourcesystem and check ur datasource
BW system
-->Did you replicate the data source?
-->R u able to see the data source in BW side?
--> If replicated can see the data source then check for the DS is active or not?
--> If the DS is inactive then if you want o activate the data source -->Double click on DS and change -->activate the data source and try to create update rules or transformations.
Regards
KP
Edited by: prashanthk on Aug 14, 2010 9:40 AM
Edited by: prashanthk on Aug 14, 2010 9:43 AM -
Error while using Extractors in BODS
Hi All,
1.Our version is BODS 4.0 & ECC 6.0 EHP5.
2. We can able to import extractor from SAP system.
3.Error while running the extractor job in BODS, Please see the error below.
Extractor returned error: <E: MESSAGE - Job ODQR_20140806_121712_000014_C could not be scheduled. See the system log for
details.. MESSAGE_V1 - ODQR_20140806_121712_000014_C.>.
4. I checked running RSA3 transaction, there we can able to see the data. Aslo tested by using ABAP program, the result was Maximum waiting time of 7.200 seconds exceeded.
Aslo i refered below link.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=272794989
Thanks & Regards,
Balamurugan GHi Ganesh,
Its standard extractor - 0CUSTOMER_ATTR
I can able to see the data in RSA3 but i don't know how to check in RSA5/RSA6 whether its enabled or not.
I checked in ROOSATTR table that extractor is available.
Thanks & Regards,
Balamuruga G -
Error while activating info objects.
Hi,
After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
*DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A *
kindly help me.
thanks.
- rohit mulayHi Rohit,
you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
Please follow bellow steps:
1.Goto SE38>give the Program>click on Execute.
2. Give the technical name of Datasource and Execute.
Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
3. Replicate the Datasouce in BI side.
4. Activate the relavent Objects indevedulally.
Regareds,
Suman -
Error while uploading setup table
Hi experts,
while loading the setup table for PO , I am getting the below error.
"No extraction structure active or no BW connected"
what could be the problem and how to rectify this but the stucture is active in LBWE
Thanks in advance
saiHi,
this issue can be resolved in two ways.
1. Check ur RFC connections in both BW system n R/3 System.Goto sm59 in both r/3 n in bw..select the logical system(i.e..ur source system) test the connection...if the connection is ok..then goto RSA5,activate the data source and do the same in LBWE as well..
2. if the connection is not ok..check ur logical sys..in Transaction SALE...there is a possible of changing ur logica ystem too...kindly check it out..
hope this helps..
thanks... -
Error while enhancing logistics datasource ????
Hi Friends,
I am trying to enhance one of the Logictics D/S (2LIS_02_SCL) and when I try to append the extract structure I get the following error....
"DataSource 2LIS_02_SCL does not allow append structures??"
Early input would be greatly appreciated ......
Note: I get the same error for other D/S also (HDR, SCN,ITM etc)
Thanks,
AndyHi Andy,
Goto Tcode : RSA5 or 6 take extact structure name(double click on datasource).
Now goto TCode : SE11 -->> input extract structure name -->> Disply -->> Chose enhace.
Hope it Helps
Srini
Maybe you are looking for
-
How can I display more info using remote app?
Hi there, I use remote app a lot, but I find it quite basic in the display features. I mean: remote is great to browse my music library and play songs with on my living room hi-fi while I'm sitting comfortable on my sofa. But what if I would like to
-
I updated to Adobe cc now my vram is insufficient, how do I address this
Is there a way to increase the VRAM what do I do to meet the required specifications for Adobe CC? Model Name: iMac Model Identifier: iMac10,1 Processor Name: Intel Core 2 Duo Processor Speed: 3.06 GHz Numb
-
When will the smart stop/reload button be available for version 24.0?
I want to have a button to stop loading/reloading.
-
[Edit: It should be FF 3.5. I mistyped FF 3.15] I have MAC OSX Snow Leopard. 10.6.8. FF 3.5 [apologies; I mistyped 3.15] worked perfect with Snow Leopard. NO problems. But '''everything''' after that, till FF 8, crashes left and right. Facebook crash
-
Hey...my iphone 4s suddenly goes blank and apparently enters in DFS or recovery mode and it doesen't work anymore.I have to turn it on but sometimes only starts if a pres home button+power for 10 sec or more.It's really annoying since i always have t