Error in RSRV check
Hi Friends,
I have to run a RSRV check for the some Characteristic Infoobjects.
When i schedule the analysis for an infoobject in background, i constantly get a short dump with this run time error TSV_BTR_PAGE_ALLOC_FAILED and DBIF_REPO_PART_NOT_FOUND.
I would really appreciate if some one could help me out with what this error is.
Thank you very much for all your efforts.
Neel
Hi Bhanu,
Thanks for looking for the CD. Anyways I actually did figure out how to run RSRV checks for the cubes.
But we landup in problem, when we run RSRV check for Infoobjs.
My qustion is how to find out which notes have been already applied to this 2.0B sys.
I also looked at the note: 314044, it say it is for 2.0A, wanted to make sure if this could be used for 2.0b also.
Also i tried running RSRV check with just few tests for Char, when no other bkgnd jobs were scheduled. The job got cancelled with the same error.
Please do suggest how i should proceed further.
Thanks
Similar Messages
-
RSRV check correct error in run in background
Hi All,
can we run RSRV correct error in backgroud? if so, how?
thanks in advance!
AldenHi,
RSRV contains additional information---If you go to transaction RSRV you can see a list of tests on the left hand side. You can choose the required one and drag it to the left side and supply the variant, i.e. cube or InfoObject name as required. Then you can execute. After the test is complete you can click on the Display Logs button to see the test results. You can right-click on the check itself to get documentation via the Description option . This tells you what the check is and, in most cases, if a repair option is available and what that repair accomplishes.the ability to do combined tests based on a particular area, such as master or transactional data for one InfoCube. You can run a series of inter-related checks on one or all objects without having to individually select all the checks and pre-select all objects or all InfoCubes for every check. This provides you with an easy process to select the checks you wish to run, and it allows you to select all of them at once. This gives you more thorough checking and also reduces the time for scheduling and administrating the RSRV check process -
BW Upgrade from 3.5 to version 7 - RSRV check fails in conversion exists
Hi All,
We are in the process of doing preupgrade checks for version 3.5 and for infoobject 0MATL_GROUP (material group) RSRV checks fails and throughing conversion exit issue for some SID's ,
Error Message:
Check values of characteristic 0MATL_GROUP for conversion exit
There are 41 values with the wrong internal format in the SID table
The first 10 errors are:
Value in SID table 4350/ correct value 000004350/ SID in SID table 2732
Value in SID table 10000000/ correct value 010000000/ SID in SID table 2716
Value in SID table 12000000/ correct value 012000000/ SID in SID table 2717
etc...
I just want to check do we need to fix this error before doing the actual basis upgrade 7.0 tasks orelse is it OK to do upgrade without fixing this error .
Pls advice is there is any way to fix this issue in system without deleting the above SID's in the system.
Is this error will create major issues afterupgrade to 7 without fixing this SID issues in 3.5 - Pls adivce us.
With regards,
HariHi Hari,
From the error message it seems that you had data loaded to 0MATL_GROUP before the EXIT (I guess it is an ALPHA exit)
was switched on. Now the system find values that are not ALPHA converted with the RSRV check. You should correct this
problem before doing the upgrade. It should be possible to do the ALPHA conversion using the transaction RSMDCNVEXIT.
The reason for doing the ALPHA conversion before the upgrade is that transaction RSMDCNVEXIT is no longer available in BI
7.0, Since some objects of the new data flow in BI 7.0 ( for example BIA) are not covered by RSMDCNVEXIT it has been set to obsolete.
Customers cannot use transaction RSMDCNVEXIT anymore in release BI 7.0.
Best Regards,
Des. -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Data error (cyclic redundancy check) when installing windows xp..
hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?
-
OraRRP Error with "Unable to copy data file;Error code 2, check disk space"
Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel -
Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name: APPCRASH
Application Name: AcroRd32.exe
Application Version: 11.0.10.32
Application Timestamp: 547e9779
Fault Module Name: StackHash_147f
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c000041d
Exception Offset: 77a011f1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 147f
Additional Information 2: 147ff66574b08dc93180d912e60eb897
Additional Information 3: c48b
Additional Information 4: c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtCan you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].
-
Error on ATP check when Creating a Sales Order
Hello,
I encounter error on ATP check while creating a Sales Order.
The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
Is it possible that the SAP note that I applied causes the error?
By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
Thanks.
NoreenHello,
I encounter error on ATP check while creating a Sales Order.
The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
Is it possible that the SAP note that I applied causes the error?
By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
Thanks.
Noreen -
Error in license check - Error getting the hardware key
Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan -
Error in Commitment Check message
We are on SRM 4.0 and have funds availability turned on in the backend system (ECC 5.0). A user created a shopping cart using multiple sources. However, after the cart was approved, it would not transfer to the backend. We are getting the error message "error in commitment check". I looked everywhere I can possibly look and have not found anything wrong with the accounts. I even tried to create the requisition on the backend using the same sources and did not encounter any problems.
Does anyone have any suggestions as to what is causing this problem and how to resolve it?
Monique StephensWe were able to correct the problem (sort of). The user had created the shopping cart using multiple accounts and split them by percentage. The percentages were two decimal places (for example, one account was getting charged 16.66). But, if we changed the percentage to a whole number (ie 17), the cart went through successfully.
That brings me to another question...is there a limit on the number of decimal places in SRM. I know in SAP, we can only go one decimal place. But, I don't know if that is in config or not. If there is a limit, is there a way to prevent users from going beyond the limit while creating the cart so that we don't encounter this problem in the future?
Monique -
Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?
Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.
-
So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!
Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware). -
"software update" "An error occurred while checking for updates"
When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response. -
Error occuring while checking for updates in windows 7
i have tried your solution of subinacl but still an error ocurred while checking updates in windows 7.how to i solve this problem
Hi,
You can try windows update rediness tool, pick the correct version you are running.
System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2014]
System Update Readiness Tool for Windows 7 (KB947821) [May 2014]
If it didn't help, please try to reset update component:
http://support2.microsoft.com/kb/971058 -
ERROR 801881e1 while checking for phone update
i get the following ERROR 801881e1 while checking for my phone update. I really want some solution. pls help if anyone knows about this. i really want the amber update.
Try this ..
Go to settings-->keyboard-->add keyboard and select any .. let it download to the phone ..
Now check for the update ...
If it goes thru' fine, you may remove the added keyboard by again going to settings-->keyboard and long press on the one you want to .. then select 'remove' ..
Maybe you are looking for
-
The page total amount is not correct on discoverer plus 10.1.1.48.18
on my discoverer report, there is sunnary field based on a column. for example, I have a salesrep expense discoverer report. the salesrep name is the page item, each page has one salesrep, under the page item there are many line which show the expens
-
Get Health to stop using iPhone for steps data?
Hi all, Is there a way to get Health to stop using the iPhone for tracking steps? Or is that just an automatic thing? For example I have a Fitbit Flex for the wrist which I wear all the time which to me would seem more accurate (and more convenient
-
Dont show balances with 0 amount in Reports?
Hi, Can we restrict reports, developed through Report Painter, not to display the items of which the posting/balance is 0. I have a requirement of not to show GL accounts that are with 0 balances in customized balance sheet? Thanks
-
what's with this forum? does anyone support it?? Anyway, for the second time posting, I just installed an evaluation copy of Weblogic Server 6.0. I downloaded Weblogic jDriver for Informix. In the installation instructions, it tell me to setup a conn
-
Pdf's as automatic reply/email for buyer on website -tips?
Wondering what the general steps are for sending an automatic email and/or pdfs to email of user/purchaser? I know there are two issues, the purchase and email to me, and more importantly, the automated email return to them with the pdf's. I have a p