Error in running Cisco IDM

I'm experiencing a couple of problems when trying to
run the Cisco IPS Device Manager (IDM).
First, I launched the IDM and received an error that
I needed to upgrade to 1.4.2 or higher. So I
upgraded my JSE to 1.4.2_12.
Then I launched the IDM again and received an error
that my heap size was less than 256MB and I needed to
increase it. So I accessed the Java plug-in and
entered -Xmx256m in the Runtime Parameters field like
I was told.
Then I launched the IDM again and received an error
that the JRE can't be loaded and that I need version
1.4.2 or higher.
I have tried uninstalling everything and going
through the entire process several times now with the
same results. Please help.
Thanks, BenWhat version of Internet Explorer are you using? I had the exact same problem; at the time i was running IE7RC1 on my laptop and had ver 1.5 of JRE installed. Every time I would enter runtime paramaters in through the java control panel, the JRE would fail to load upon execution. I even placed a call into Cisco. When Cisco called me back, I had upgraded to the new full release of IE7, I went to replicate the error and instead it worked. Cisco states that the IDM is only supported on IE6. I have found that all the pre-release versions of 7 seem to have these issues with the JRE, but the final release does seem to support IDM and I have had no problems since. I hope this helps.

Similar Messages

Problem running Cisco IDM

I'm experiencing a couple of problems when trying to run the Cisco IPS Device Manager (IDM).
First, I launched the IDM and received an error that I needed to upgrade to 1.4.2 or higher. So I upgraded my JSE to 1.4.2_12.
Then I launched the IDM again and received an error that my heap size was less than 256MB and I needed to increase it. So I accessed the Java plug-in and entered -Xmx256m in the Runtime Parameters field like I was told.
Then I launched the IDM again and received an error that the JRE can't be loaded and that I need version 1.4.2 or higher.
I have tried uninstalling everything and going through the entire process several times now with the same results. Please help.
Thanks, Ben

I'm experiencing a couple of problems when trying to
run the Cisco IPS Device Manager (IDM).
First, I launched the IDM and received an error that
I needed to upgrade to 1.4.2 or higher. So I
upgraded my JSE to 1.4.2_12.
Then I launched the IDM again and received an error
that my heap size was less than 256MB and I needed to
increase it. So I accessed the Java plug-in and
entered -Xmx256m in the Runtime Parameters field like
I was told.
Then I launched the IDM again and received an error
that the JRE can't be loaded and that I need version
1.4.2 or higher.
I have tried uninstalling everything and going
through the entire process several times now with the
same results. Please help.
Thanks, BenWhat version of Internet Explorer are you using? I had the exact same problem; at the time i was running IE7RC1 on my laptop and had ver 1.5 of JRE installed. Every time I would enter runtime paramaters in through the java control panel, the JRE would fail to load upon execution. I even placed a call into Cisco. When Cisco called me back, I had upgraded to the new full release of IE7, I went to replicate the error and instead it worked. Cisco states that the IDM is only supported on IE6. I have found that all the pre-release versions of 7 seem to have these issues with the JRE, but the final release does seem to support IDM and I have had no problems since. I hope this helps.

Error during upgrading Cisco Unity Connection to SU2

Help!
I'm facing an error while upgrading Cisco Unity Connection 8.5.1.10000-26 to SU2 (8.5.1.12900-7).
When it's trying to download the SU2 file (UCSInstall_UCOS_8.5.1.12900-7.sgn.iso ) to Unity Connection after 2GB I get this error:
Error encountered: Upgrade has detected that the ISO file name has been changed from the original name. This is not allowed. MD5 Hash Value: 32:32:db:47:99:48:c6:53:12:e2:78:76:94:90:a4:1d
I tried this from multlpe FTP servers and I downloaded the SU2 file multlpe times assuming the download was bad. I also rebooted the Unity Connection server here and there assuming it was something with the server.
I first tried SU1, but that gave the same error, so I attempted to go with SU2.
Any ideas for resolving this?
Thank you!
-rya

Hi Rya,
OK...well you've certainly done your due diligence here
Did you run an MD5 check after the download to compare the file values?
I had a long look for bugs related to this issue and came up empty so I can't see
a bug being the cause of the issues here. Is it possible for you to try "burning" the
upgrade .iso to a DVD and trying again?
I am also curious why you wouldn't move straight to 8.5(1)SU4
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Error while running a Java Program

Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Error While Running a page on JDeveloper

Hi All ,
I am getting the following error while running a page in Jdeveloper . Can any body help me?
(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier ; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862) at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ## Detail 0 ## java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141) at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1328) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getMultiSpecificProfileFromDB(ExtendedProfileStore.java:368) at oracle.apps.fnd.common.WebAppsContext.setProfileValues(WebAppsContext.java:4177) at oracle.apps.fnd.common.AppsContext.setDBEnv(AppsContext.java:3407) at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2508) at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976) at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827) at oracle.apps.fnd.common.AppsContext.(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ">

check your DBC file, we have discussed this issue in the forum, search for SERVERRESP_ENABLED_FLAG

Error while running a KPI Watchlist in obiee 11g dashboard

I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .

Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA

For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.

You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians.

Error while running web application through JDEV (10.1.3.0.3) in OC4J

Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
 Missing class: javax.xml.bind.JAXBContext
 Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
 Loader: oc4j:10.1.3
 Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
 Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
 at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil..

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

500 Internal server error while running sqlsrv_query in PHP

Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo " ".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.

Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Urgent.....Error while running a jsp report from Jdeveloper

Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
 at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
 at MyReport.jspService(MyReport.jsp:4)
 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
 at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
 at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...

Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva...

Error while running a test case in Jcaps 6 JDBC project

I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
Kindly suggest a solution

It seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
Good luck!

Error in running Cisco IDM

Similar Messages

Maybe you are looking for