Error in running diags on fpga
hi all,
i could successfully download the opensparcT1 on ml509 board and ran all my diags ending in good trap...
i repeated the same by creating a buggy model which had given bad traps for my diags during simulation...
i could synthesise and generate the .bit file for the buggy model.. and also download the same on the board...when i run my diags i get the following error
MBFW_INFO: running RTL diag "exu_add.s"
MBFW_INFO:Microblaze firmware initialization completed
MBFW_INFO:Powering on opensparc T1
MBFW_ERROR:timed out waiting for pcx_pkt data word
MBFW_INFO:existing with status 1 error
can anyone help...
Hi Lenu,
The message "MBFW_ERROR: timed out waiting for pcx_pkt data word" indicates that the processor hasn't made a memory request in a long time. Either the processor is in a tight loop, executing code out of the I-cache, or the processor is waiting for a response to a previous memory request that somehow got lost. In that case the processor just locks up. What kind of bug did you insert?
Also, check your place and route log and make sure your buggy design met timing.
formalGuy
Similar Messages
-
Correct way to stop and run again a FPGA reference
Hi guys !
I have some issues when I try to stop and run again an FPGA vi, I explain.
I have two DMA FIFO, one to send data to the FPGA from the CPU, and another from the CPU to the FPGA. When it receives data, the FPGA processes them and sends them back to the CPU and according to the result the CPU makes something. For instance it can be switch on LEDs or rotate a DC motor.
But to do this kind of actions, I have to use an "FPGA Personality", LEDs and I/O Pins seem to be managed by the FPGA core. So I've to close my FPGA vi reference in charge of receive data from the CPU, make my LEDs switching on and then after rerun again my FPGA VI again, If I don't do that LEDs blinking or motor rotation stay without effect... But close and start again the FPGA VI creates problems during the execution, especially for previous waiting of reading on the DMA FIFO... I've tried to catch errors on the FIFO to start again the FPGA VI with a right timing but nothing... I'm lost and I think that I'm missing something, a concept or something else.
I can't share my code because I'm working for a company but I would like to know if you have VI with this type of structure : an FPGA reference which have to be halted to allow hardware interaction with the default FPGA personality and then run again, everything with a good synchronisation...
I hope I'm clear, but if it's not the case, I can reword if necessary.
Thank you for the help !
Afghow.
Solved!
Go to Solution.Afghow wrote:
I think the end user doesn't have to know that when he wants to make LEDs blinking he has to call a FPGA bitfile. I mean running an FPGA VI and want to make LEDs blink from the CPU VI at the same time should be transparent for the user and this without keep in mind horrors like bitfile switching for instance.
He doesn't have to load a different FPGA bitfile. Everything you need that FPGA to do should be in the bitfile. Keep in mind that we are talking about HARDWARE when we talk about FPGA. Each time you change bitfiles, the hardware has to be reconfigured. That takes time and is pointless for the situation you are talking about. Build your FPGA code to do everything you need it to and you will be fine.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Error while running a Java Program
Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards -
Hi all,
I am getting this particular error while running a report. The error is:
<b>SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 </b>
Could anyone tell me what that means?
Thanks In advance,
RajHi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh -
Error While Running a page on JDeveloper
Hi All ,
I am getting the following error while running a page in Jdeveloper . Can any body help me?
(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier ; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862) at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ## Detail 0 ## java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141) at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1328) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getMultiSpecificProfileFromDB(ExtendedProfileStore.java:368) at oracle.apps.fnd.common.WebAppsContext.setProfileValues(WebAppsContext.java:4177) at oracle.apps.fnd.common.AppsContext.setDBEnv(AppsContext.java:3407) at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2508) at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976) at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827) at oracle.apps.fnd.common.AppsContext.(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ">check your DBC file, we have discussed this issue in the forum, search for SERVERRESP_ENABLED_FLAG
-
Error while running a KPI Watchlist in obiee 11g dashboard
I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.
-
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA
For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians. -
Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.xml.bind.JAXBContext
Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
Loader: oc4j:10.1.3
Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil.. -
I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?
This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay. -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Urgent.....Error while running a jsp report from Jdeveloper
Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
at MyReport.jspService(MyReport.jsp:4)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva... -
Error while running a test case in Jcaps 6 JDBC project
I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
Kindly suggest a solutionIt seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
Good luck! -
Error while running custom BI report in R12.1.1
Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
PraveenHi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.
Maybe you are looking for
-
OK. In a nutshell. I am getting render times (converting to H.264 for web, 8000kbps, 720x1280) of about 25 minutes with my current Macbook Pro - 4GB ram. Without doing anything else with the machine. First question - how much can I reasonably expect
-
My iPhone 5 battery died and will no longer turn on. What do I do?
Just got my new iPhone 5 two days ago. My battery died and I tried to charge it for the first time but nothing happens. It won't charge via USB or the wall plug. The only thing that happens is the picture of the phone with the arrow pointing to the b
-
Hard drive will not show on desktop?
Please can someone help? when i connect my iomega ego HDD to my macbook pro it does not show on the desktop and i can not access it? i have gone to FINDER and the preferences say it will show. I have gone to the SYSTEM PROFILER and it shows as conn
-
Unable to digitally sign and save a PDF document
I am currently using ADOBE ACROBAT 8.0 Professional (Ver 8.1.0). I provide proofreading service for a client. The client provides me with a PDF which I use the comment and mark up tool to indicate required changes. Once all of the comments are com
-
Hi, I was wondering if there is a way to have a tree created and rendered in the completely expanded form. I am thinking along the lines that is there is a setting or a method that by default does it. If i am not mistaken there is a posting here in t