Error in running ownership package for COI

Dear BPC folks,
When we are running ownership package we are getting following error.
/CPMB/MODIFY completed in 0 seconds
/CPMB/OWNERSHIP_CALC completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
CALCOPTION= Yes
CALCACCOUNT=POWN
COPYMANUALACCOUNT= Yes
PROPOPTION=0,0,0,0
PROPACCOUNT=
(Member Selection)
C_CATEGORY1: C_100
TIME1: 2008.DEC
CONSGROUP: G_CG1
[Messages]
More than one holding company found. Category: C_100, Time: 2008.DEC, Group: G_CG2
Application: OWNERSHIP Package status: ERROR
Could someone guide on this issue?
Appreciating Answers,
Regards,
Sudhakar.

Hi Sudhakar,
I have come across this forum link which is similar to OWNERSHIP issue you posted.
Please go through it once and revert if this is of some assistance
Lega consolidation package error
Best Regards,
Chakra Pani

Similar Messages

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old 5: AND fcpp.concurrent_request_id = &&request_id
new 5: AND fcpp.concurrent_request_id = 451508
 REQ_ID NODE_NAME
LOGFILE_NAME
 451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

BPF: Run Specific Package vs Run Specific Package for PackageExecution

Simple question:what is the difference?
I used Run Specific Package in the BPF setup, but the package does not launch upon testing
When I use Run Specific Package for PackageExecution it works...

Hi Nilanjan,
Can you through some more details or the difference between Run Specific Package & Run Specific Package for PackageExecution.
Thanks in advance.
Raghu B.S.

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
Regards.

"VS_NEEDSNEWMETADATA" error while running a package created from C# code

I have gone through most of the answers for similar questions here however none has resolved the issue. We have created a package using C# code which stages data from a source table to destination (ChildPackage.dtsx).
Source Table : RowKey, Col1, Col2
Destination Table : RowKey, Col1, Col2, RowID, RunID (RowID is an identity column in destination table and RunID is a derived column whose value is set using a variable)
This package runs fine when we execute it directly however, we run these packages from a master package (MasterPackage.dtsx). When we are trying to run the package (ChildPackage) from a MasterPackage we get an error:
[SSIS.Pipeline] Error: "Oledb Destination" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
We have tried setting DelayValidation to true for the ChildPackage and even tried setting the values for "ValidateExternalMetadata" for the source and destination component as "False" for the data flow task
of the ChildPackage.
There is no case difference between column names in source and destination and it runs fine when we run the ChildPackage directly.
The only additional task that the Master package performs is to generate and set a variable that is used as RunID value by the child package.
If we hardcode the RunID in the ChildPackage and run it directly, it runs fine.
The MasterPackage.dtsx is not created from code and has a step to run ChildPackage.dtsx. We generate the ChildPackage.dtsx from code and replace in original solution.
Any help would be appreciated.
Gaurav Agarwal

Where then this RunID is consumed?
Arthur My Blog
The RunID is set by the MasterPackage in a parameter, this parameter is used as value of derived column in the data transformation task of the ChildPackage.
As mentioned ChildPackage has a RunID column.
Gaurav Agarwal

Error while running CONSOLIDATION package

Hi all
I am getting error message during CONSOLIDATION package run time and the error message has been attached as blow
EEROR:
sFileContent><![CDATA[]]></sFileContent><ErrorMsg><![CDATA[ Cannot find document/directory]]></ErrorMsg>
Thanks in advance for your help
Ramana

Hi,
Please check if the scriptlogic file is properly saved and it has the same name as in the data manger (data manger--> advance).
Try doing a validate and save on your logic file.
regrads
SSC

Error while running import package

Hi,
Transformation file was validated successfully. But after running import package i am having following error on MS-BPC-7.0.
Invalid character in the given encoding. Line 1, position 1.
When i try validate and process trans file i am having the following error message. But same data file and same trans file was working till couple of days ago. After that whatever changes i have made to file, i did revert them to have it working like beofre.
Warning: Some records were rejected.
Rejected records reference either calculated members or invalid members.
Actually rejected record is only, one, but even other data was not loaded.
Thanks in advance for sharing your ideas or similar experiences.
Thanks,
KK

Hi,
There is definitely some problem with one of the records there. Do you have header? What is the delimiter? Do you have the same delimiter in the transformation file? You need to take a look at all the possibilities.
Hope this helps.

Error While Running an Package in BPC 10

HI Experts,
while running an Package I am getting the Attached Error
I am not able to find the logs for that in the Backend
I have also attached the 2 POA profiles to the user in the back-end
Any inputs will be highly Appreciated
Regards
Bhupendra Arya

Hi Bhupi -
Go to SU53 T-code from the back end , you can find the authorization issues; It will clearly mention what authorizations are missing in Red.
Hope this helps!!!

GENERIC ERROR COMING RUNNING A PACKAGE

Hi friends,
I have a package and under that many procedures has written. When i am trying to add a new procedure and compiling it, it is compiling correct but when i am trying to run it, it is throwing error as
ORA-04063: package body "DEV.NEW" has errors
ORA-06508: PL/SQL: could not find program unit being called: "DEV.NEW"
ORA-06512: at line 2
I checked for these errors on new but generic soln is given there. Any response what could be the reason.
Regards

It might sound silly but you didn't drop the specification first? For the avoidance of doubt, in order to compile a 'body' you must have a specification (the reverse is not true though - you can have a spec without a body).
From The relevant Oracle Documentation:
Create Package Statement
Create Package Body Statement
Edited by: Joel_C on 01-Jun-2011 12:58

WebDynpro error while implementing business package for hr administrator

Hi,
   I am implementing Business package for Hr administrative services in EP 7.0. When I click the iview Start processess I get the following dynpro error. Please do help me as to how should I trace back the problem.   com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.sap.pa.asr.procst.model.procst.types.Asr_Withoutee could not be loaded: com.sap.dictionary.runtime.DdException: Type com.sap.pa.asr.procst.model.procst.types.Asr_Withoutee does not exist
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:250)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:213)
     at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:670)
     at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:932)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:176)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:142)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:134)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$ComponentUsageManager.createBLCComponentUsage(FPMComponent.java:840)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:1020)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:979)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1230)
     at com.sap.pa.asr.procst.vac.vinit.VInitComp.onInit(VInitComp.java:200)
     at com.sap.pa.asr.procst.vac.vinit.wdp.InternalVInitComp.onInit(InternalVInitComp.java:153)
     at com.sap.pa.asr.procst.vac.vinit.VInitCompInterface.onInit(VInitCompInterface.java:161)
     at com.sap.pa.asr.procst.vac.vinit.wdp.InternalVInitCompInterface.onInit(InternalVInitCompInterface.java:144)
     at com.sap.pa.asr.procst.vac.vinit.wdp.InternalVInitCompInterface$External.onInit(InternalVInitCompInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:614)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:474)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:218)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:357)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:670)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:267)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:726)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:662)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:808)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:227)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1240)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:340)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:538)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:177)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:357)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:670)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:267)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.dictionary.runtime.DdException: Type com.sap.pa.asr.procst.model.procst.types.Asr_Withoutee does not exist
     at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
     at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:586)
     at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:286)
     at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:95)
     at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
     at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
     ... 75 more
Please do let me know if anybody could help.
Regards,
Ramesh

Maybe the user used for RFC connection either does not exist or is not granted access to the model data.
Best Regards,
Martin

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Error while running Remote Manager for OIM11gR2

Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?

Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?

Error in running ownership package for COI

Similar Messages

Maybe you are looking for