Error in Running PA40 transaction

HI,
There are certain Joining & relieving Actions we made pertaining to a defined USer Group 42. A role was created authorising attached users to run PA40 transaction. The screen of PA40 & the corresponding Action MEnu is changed by the User Group PArameter.
When the transaction is run , the system shows an error saying "You are not authorised to run the Action Z3" (Z3 being the code of action).
Unable to understnad the issue why this is happening. PLs help.

Hi,
Please check in the Authorization data of the role under the object P_ORIGIN  (HR: Master Data) whether for infotype "0000" in the subtype field the value is "*" and not " " or anything specific.
Subtype value would restrict action types as mentioned in the role.
Hope this helps.
Regards,
Shreyasi.

Similar Messages

  • Getting error when running PRC: Transaction Import

    Hi Folks
    Am getting an error when running PRC: Transaction Import to transfer time entries from OTL to Projects.
    Has anybody encountered this before?
    "MSG-20002: ORA-20002: pre_import:ORA-01422: exact fetch returns more than requested number of rows
    ORA-06512: at "APPS.PA_TRX_IMPORT", line 7549"
    If yes, please let me know the resolution.
    Kind Regards
    Srini.

    Pl see if MOS Doc 117395.1 (Transaction Import Interface Troubleshooting Guide) can help
    HTH
    Srini

  • Getting an unusual error while running a transaction

    Hi Experts ,
    While i am running a customized transaction for vb7 that is rebate settlement , I have input field on agreement screen of payment method . Whenever , i put any value in that field and run the transaction , it gives me an error "  Input values must be defined in Table T042Z. The value or
    values ' T ' are not specified in this table.  "  whereas when i check the table T042Z for payment method values , the values i m entering are present there . I cannot get why its showing this error .
    Could anyone plz help as its very urgent req ..
    Thanks in advance ..
    Ankit

    Ankit,
    Please close this duplicate thread.
    Rich,
    You are welcome. 

  • Getting error while running Receiving Transaction Processor

    Hi all,i am getting an error in po_interface_errors after running Receiving Transaction Processor concurrent program
    INTERFACE_TYPE       COLUMN_NAME                           ERROR_MESSAGE                     
    RCV-856                  INTERFACE_TRANSACTION_ID      RCV_TP_INVALID_TRX_TYPE     
    TABLE_NAME
    RCV_TRANSACTIONS_INTERFACEI am trying to do an Inter Org transfer and i put the transaction_type as 'RECEIVE' .Can someone kindly suggest what should be the transaction_type for an Inter Org Transfer in rcv_transactions_interface table.Any help is appreciated
    Thanks in advance!!

    HI,
    We are getting the transaction_type error eventhough the transaction_type is a valid.
    Please advise.
    Regards
    MV

  • Error while Running Receiving Transaction Manager

    Hi.,
    We have 11..5.10.2 on AIX 5.3 intermeditley we are getting the below error for Receiving Transaction Manager. for temporary sloution we will restart the Receiving Transaction Manager is there any permanent solution for this.....?
    we have two Receiving Transaction Manager process.
    Error
    "APP 00204: Concurrent manager encountered an error while running the spawned
    concurrent program Receiving Transaction Manager: rcvoltm TM:Timeout"

    Hello.
    Have a look on MOS Doc ID 1071727.1
    Octavio

  • Error while running PA40

    Hi,
    i'm getting an error while running my PA40,
    after giving all hiring data at the time of saving i'm getting an
    error at date of entry 
    its like
    "no infotypes found,maintain infogroup modifier/user group"
    Please help
    Anish

    Hi
    Did you maintain the IGMOD feature?
    Just check.
    R K

  • Authorisation error with PA30/PA40 transaction

    Hi Experts,
    In our system, the transactions PA30/PA40 are giving some authorisation error
    (No read/maintain authorisation for Personal Data) for all operations
    create/change/display of data. (even though in su01 transaction,
    we have given all authorisations SAP_ALL under profiles and also removed all roles)
    Also checked the possibility of any custom BADI getting called, but none exists.
    Any solutions / suggestions are appreciated.
    Thanks in Advance,
    Mirza.

    Hi!
    Right after you have the authority error, enter the following transaction code /NSU53.
    SU53 trasnaction will collect the missing autority objects.
    Regards
    Tamá

  • Error when running ULDE_ACT transaction

    Hello There,
    When running BASIC Configuration to Enable Usage and Landscape data transfer, when I run transaction ULDE_ACT, I get following shortdump:
    Runtime Errors         SYNTAX_ERROR
    Date and Time          28.06.2011 11:46:32
    Short text
         Syntax error in program "SAPLE2E_ESREP_FUNC ".
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLAGS_DDE" had to be terminated because
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLE2E_ESREP_FUNC "
         "LE2E_ESREP_FUNCTOP " in
        line 6:
        "INCLUDE report "/1CAGTF/IF_LOGFUNC_000500" not found"
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLAGS_DDE" had to be terminated because
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLE2E_ESREP_FUNC :
        "INCLUDE report "/1CAGTF/IF_LOGFUNC_000500" not found"
    Information on where terminated
        Termination occurred in the ABAP program "SAPLAGS_DDE" - in
         "AGS_USAGE_EXT_ACT".
        The main program was "AGS_USAGE_ACT ".
        In the source code you have the termination point in line 8
        of the (Include) program "LAGS_DDEU03".
    Has anyone came across this error? please advise.
    Thanks and regards,
    Nischal

    Hi,
    Please update your solman verson, this syntax error is te common issue, please follow the note [sap note 727998|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=727998]
    please try this, in solman -> utilities -> there maintain service definitin -> select te icone 'Delete and Replace Service Definitions' and continue for a new task 'Service Definition Refresh' created.
    and follow the note tat  shows how to refresh the service definitions and generate the logfunc Includes,
    Thanks,
    Jansi

  • Error when running DSA transaction

    Dear Experts,
    I just updated service definition on the satellite based on note 727998 and run DSA to get the EWA report, however the following error showed up:
    - Value check errors in some tables ( 2). Loss of Data
    Message no. DSVAS331
    Diagnosis
    Transaction DSA found an error in the service. Incompatible data was written into at least one check table during the service. Data is incompatible if the cell value does not match the column type. The IDs of the check tables are in parenthesis in the message.
    System Response
    The DSA deletes the contents of all cells with incompatible data.
    The Solman is EHP1 and the satellite is ECC6.
    Please help us to fix the problem
    Thank you,
    Rudi

    The abap short dump come after clicking OK:
    Syntax error in program "RDSVASAEW_DBUDB____________058 "
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "RDSVASAEW_DBUDB____________058  " in include "RDSVASAEW_DBUDB____________058 " in line 61:
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found"
    Regards,
    Rudi

  • Error while running MM17 Transaction

    Hi Frnds,
      I am doing MM17 Mass transaction Field (MBEW-VPRSV ) , i am changing the price control of a material from V to S then i am getting an error saying that :
    ELF-WJ-35MM-CSM1 : Messages have been issued: number MASS000484000000.
    Regards
    Rakesh

    Hi Rakesh,
    I think Cost Component Split already exists for this material hence system is not allowing to change price control.
    Pl. check by changing price control manually by using MM02.
    If same error is occuring, then pl. verify whether MAP and Standard Price are identical for this material or not.
    In this situation, you have to make these two prices identical then only you can change price control.
    To make both the prices identical by using MR21.
    Regards,
    Amol

  • Error when run the transaction ES55 or ES56 of Connection Object

    Dear Expert,
    I like to say that our organzation is going to SAP 4.7 to 6.0. All the basis activity has been comlpleted & now its testing time.
    I was faced the problem when create connection for Business partner. Actually when I write the t-code ES55 for creation of coonection Object in SAP menu path & press enter then show the error "system settings for the alternative labeling of functional locations have not been maintained in Customizing."
    So I have activate the funclocation location alternative labelling. after that again run the T-Code es55 this time show the error "An alternative indicator is active in Customizing of the functional location. This functionality is not supported for connection objects and device locations"
    Please suggest me how we customized the conection object 7 how will resolve the error.
    Thanks & Regards,
    Deepak

    Hello Deepak,
    please read note 964931:
    These alternative labeling systems are not provided with the standard
    product for the IS-U connection object and device location.
    If you want to use alternative labeling systems for the IS-U connection
    object and device location, SAP recommends a remote consulting.
    Regards
    Olivia

  • I am getting error when running the transaction F110

    HI friends,
    i am using the F110 transaction for transfering the cheque and EFT .
    after entering the  values in parameter, additionla log and print/data medium.
    when i press  the staus button then it gives the message as"Parameters entered"
    then when i press the "printout " button and checked the box as "Start immediatly"
    but it gives the message as "Payment proposal has been released on 16.10.2007 10.15.30 sec
    can anybody help me.......
    reward points are there for every answer
    Regards
    Raja.

    hi reddy,
    go top Check register in FCHN and check where that the check number has been created with that amount.
    If not go to SE38 and enter the RFFOUS_C and press execute it and enter the Payyng company code and Identification and enter all the required info and then again execute it
    Then u can see with the Check print out.
    Hope this helps u and let me know.
    Assign the points if helpfull
    Ranjit

  • Runtime Error is coming in PA40 transaction

    Hi All,
    When i recorded PA40 transaction using SHDB. When i run this BDC using SHDB transaction it is working fine. when i converted this BDC into report it is giving runtime error. anybody faced this kind of problem . please help me out in this.
    Error : Runtime Error
    Thanks,
    Maheedhar
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 5:43 PM

    Can you please tell me ? what is the runtime error you are getting.
    the steps to transfer the recording to the program is .
    1) save the recording.
    2) press back button.
    3) select your recording name.
    4) click  Program.
    5) give the program name startign with Z
    6) check transfer from recording.
    7) enter.
    this is the steps that you have to follow while recording. even then also if you dont get then . please provide me with the runtime error . it would be help ful for me to help you easier.
    Cheers,
    Shiva

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Getting an unusual error while running transaction for rebate settlement

    Hi Experts ,
    While i am running a customized transaction for vb7 that is rebate settlement , I have input field on agreement screen of payment method . Whenever , i put any value in that field and run the transaction , it gives me an error " Input values must be defined in Table T042Z. The value or
    values ' T ' are not specified in this table. " whereas when i check the table T042Z for payment method values , the values i m entering are present there . I cannot get why its showing this error .
    Could anyone plz help as its very urgent req ..
    Thanks in advance ..
    Ankit

    Ankit,
    Set a breakpoint very early in the program's soruce code.  When you hit that breakpoint in the debugger, go to the menu bar and choose Breakpoints > Breakpoint at > Statement .  Enter the word MESSAGE into that pop-up window and continue the program's execution.
    This will stop the debugger at all MESSAGE statements... Including the one that is generating your error.  You can then analyze the code just prior to that error.... and address the issue accordingly.

Maybe you are looking for

  • Taking Long Time to Copy Apps to New Ipod

    Had first gen ipod touch.  Apps and music were usually downloaded directly from iTunes store onto ipod.  Synced it with iTunes to get all purchases into it then hooked up new ipod 4g which was set up as new.  Started a sync with new ipod to copy ever

  • Commands that can be entered in the 'Command Field'

    Hello All, Does anyone know all commands that can be entered in the 'Command Field'. I am interested in the commands that start with &. For example &sapedit, &vexcel, &vgrid; etc. (OR commands such as PRFB; etc.) Just curious, where all these command

  • Upgrade To Qicktime 7.1.3, then internet videos don't play. Help!!!

    the title explains it all. I upgraded to the newest quicktime. But when i went online to look at movies and other video files, it just shows white. Everything else is fine besides that. Weird. Help?

  • PROPERTY NOT WORK

    DEAR ALL GOOD MORNING A RIDO_BUTTON IN TRIGGER WHEN VILDATE ITEM I WRITE THTIS CODE BUT NOT WORK SET_ITEM_PROPERTY('XXX',VISUAL_ATTRIBUTE,CURRENT_ROW_BACKGROUND_COLOR,'VISUAL_RED'); WHAT IS CORRECT THANK YOU ALL

  • Mysql_num_row in java

    hi im designing a database program with java but i cant find the way to return the number of column count which is appropriate to my query in php i used to mysql_num_row function are there anything like this in java? Ps: I'm using mysql-connector-jav