Error in RuntimeWorkBench - component monitoring- AdapterEngine
Hi SapAll.
here i just want to test a Idoc To File Scenario but i dont have Idoc at sender side to trigger,so i just created a test data with all the required data in ESR(Message map,ping) and copied the test data from Message mapping and pasted into RuntimeWorkBench ->component monitoring->AdapterEngine ->test message (tab) by filling all the required fileds( Sender Component: *, Receiver Component:,Interface:Interface Namespace:,User,Password.
but when i tested by filling with all the above mentioned fields i have got an error as below
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=ECDCLNT001;TS=DCS;AN=DESADV.DELVRY05.ZXDELVRY05;ANS=urn:sap-com:document:sap:idoc:messages; in the current context [Unknown].
can any body help on what the above error mean.
will be waiting for quick answer.
regards.
Varma
Hi Varma,
I hope you have tested the configuration in the ID through test configuration table with the same test data.
try making some dummy changes in the Receiver and sender agreement and see if correct channel is assigned,
try restarting the channel.Please do a CPA cache refresh.
can you try checking the option use virtual receivers in sender or receiver agreement and don't give any values there ,just select that check box and save.
I remember once it did the trick for me.don't know if it applies to your scenario.
regards,
Srinivas
Similar Messages
-
Error in RWB - Component Monitoring - Adapter Engine
Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PIHi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego -
Hi,
After migrating from EP5 SP6 to EP6 SP14, we see the below error in the following navigation.
KM Admin -> KM Component Monitor -> Repository Managers the pcdrepository light is red.
Startup Error: Failed to init sub-manager: Exception loading and instanciating sub-manager: com.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager (java.lang.NoSuchMethodException: com.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager.<init>(com.sap.netweaver.bc.rf.mi.IManager))
Any ideas on this would be greatly appreciated.
Regards,
Rick TaylorHi Rick,
this is a known issue in SPS14. Please edit the PCD Repository Manager configuration. You'll have to change the Parameter "Property Search Manager" to "Not set" and restart the J2EE Engine.
Hope this helps,
Robert -
Error in RWB Component Monitoring ... "Domain ???"
Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows <i>"Domain ???"</i> would anyone know what could be the problem?
Warm regards,
GlennHi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V -
How to integrate CCMS with RWB component monitoring
Hi, all.
I am wondering if there is a way to forward errors from the component monitoring and CC monitoring in RWB to CCMS. For example, if a CC is down because somebody changed the CC user or password or disable the CC totally, RWB will show errors in the communication channel monitoring. However, I could not find a way to forward those messages to CCMS so that we can manage it in a centralized way. Any idea?
Thanks,
Jonathan.
Edited by: Jonathan Ma on Nov 4, 2011 9:50 PMHI, look this...
CCMS Heartbeat... RWB
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
But First, you'll need all of this..
how to coonfigure CCMS Alerts and Alert Categories and Alert Rules
Regards! -
CC problem in RWB Component monitoring
Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekarHi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao -
hi experts,
i'm working on file2jdbc secnario,in component monitoring it occured an error like.............
"Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure) Even in the datatype i mentioned action as attribute.i need some solution to overcome this.
helpful answer will be rewarded.
regards,
Kiran.Kiran,
Go through this links,
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar -
Error in Component Monitoring(Runtime Workbench)
Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti -
Error got in Communication channel monitoring ( component monitoring)
Hi Experts,
When i executed the RFC from R3, i got the below error in runtime work bench.
please help me out if any one knows, i already gone through some of sdn line, but i am not able to get exact solution.
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=qa2.syec.sshe.ed SYSNR=13 GWHOST=qa2.syec.sshe.ed GWSERV=sapgw13 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Thu Mar 20 15:44:08 2008
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic_mt.c
LINE 10713
COUNTER 1
1) Registered Server Program has been created in RFC destination in R3, and RFC destination has been tested successfully, in R3 System we have 9 clients, but i have created one client independent RFC detonation type TCP/IP. is it right way to create client independent single RFC destination for multiple clients?? ( 3 unit test clients, 3 development clients, 3 configure clients), but in SLD only 3 business are created ( which are for 3 unit test clients), i have imported business system for client 300 and i have created communication channel under this business system, but when i run the RFC in this client i am gettin above error in component monitoring.
2) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
3) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhiHi,
This solved this issue for me:
Setting Maximum Database Connections
Perform this step only if you want to check or change the values.
1. Open the Visual Administrator tool.
○ j2ee admingo.bat if you also use SAP WAS ABAP.
2. Log on as an administrator.
3. Choose Server ® Services ® JDBC Connector.
4. Choose the Properties tab strip and select sysDS.maximumConnections.
Regards,
Hugo Mendoza -
Error in Runtime WorkBench/Component Monitoring
Hi all,
1. I have configured an AS ABAP system to connect to the SLD successfully. In the Technical System List of SLD, it's named "TE1 on sap0810". (Successful)
2. After, i have created a Business System corresponding for this Technical System "TE1 on sap0810" with Client 810. In the Business System List of SLD, it's named "BUSINESS_SYSTEM_TE1CLNT810". (Successful)
3. And after, i log on into Runtime WorkBench and choose "Component Monitoring" Tab and choose Display all component, i get an error about the Business System "BUSINESS_SYSTEM_TE1CLNT810" for "Ping Status" and "Self-Test Status" as message below: (Error)
Ping Status: Unable to log on to system BUSINESS_SYSTEM_TE1CLNT810 in language en with user PIRWBUSER Last Retry Jul 28, 2008 5:48:56 PM ICT ... Details
Self-Test Status: Unable to log on to system BUSINESS_SYSTEM_TE1CLNT810 in language en with user PIRWBUSER Last Retry Jul 28, 2008 5:48:56 PM ICT ... Details
Anyone can please help me to resolve this problem?
Thanks a lot in advance,
<removed by moderator>
Vinh Vo
Edited by: Mike Pokraka on Jul 28, 2008 5:07 PMhi friend
If you have created the TS & BS correctly in SLD
check the following points:
1)The JCO service might have been down...check it out....Sometimes it happens due to overloading of server...try to restart the server.....after clearing queue and cache restarting the server
2)check the RFC destinations AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER.
regards
kummari -
Error in Runtime Workbench, Component Monitoring, Proxy Runtime
Hi,
I have the following error in the Runtime Workbench, under Component Monitoring->Integration Engines->Proxy Runtime. The error message is Ping Status: Unable to logon to system xxx in language EN with user XIRWBUSER. However, I am unable to find out where the account and password are specified in order to correct this. Any help would be appreciated.Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti -
Business Process Engine error in component monitoring
Hello,
i installed a new version of XI.
when i check the component monitor whit browser i see that Business Process Engine element have RED led.
If i look the details, then i have the follow element whit yellow status:
Maintain Prefix Numbers
Configure RFC Destination
Schedule Background Job for Missed Deadline
Schedule Background Job for Work Items with Errors
Schedule Background Job for Event Queue
Schedule background job for clearing repor
something during configuration?
thanks for suggestionsHi,
first thing you should try is:
1. Start transaction SWU3.
2. Use the button u201CAutomatic workflow customizingu201D
it's explained [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10bcbd65-64ea-2a10-9a8d-b653b8e0843c] .
Regards
Patrick -
Regarding Communication Channel Error in Component Monitoring(RWB) in Dev
Hi,
In my XI dev Server when I check Component monitoring....Adapter Engine and CC monitoring are showing errors ( showing red
symbol)......
I think my RFC to File Scenario cannot be executed due to this.......I cant receive any messages in SXMB_MONI.....
Please help me......
Thanks,
SudheerHi...
Still I am not getting any messages in the MONI.....
In communication Channel Monitoring it is showing green.......
In Component Monitoring Integration Engine:XID showing red.....CCMS Status: showing red and Adapter Engine Showing red......
Created RFC destination at ECC(of 'T' type) and gave ECC details....Then gave same details in Communication channel in XI.......
I did not created RFC Destination at XI.......
Should data to be passed to RFC or XI automatically pings the data......
When ABAPer executed RFC Connection its successful...but when he executes Functional module i.e test it is showing 'SYSTEM_FAILURE'.....
Thanks,
Sudheer -
Component monitoring - adapter engine error, but no channel in error actual
Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
OlianHi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM -
File System repository error in component monitor
Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
SushanthHi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard
Maybe you are looking for
-
Web start seems to deploy but doesn't load the application
Hi all, I have a simple application that i am deploying using web start. I have my JNLP file below. <?xml version="1.0" encoding="UTF-8"?> <jnlp spec="1.0+" codebase="http://chrismccreadie.is-a-geek.com/test_server/web/" href="launch.jnlp"> <info
-
My middle button on my iPod touch doesn't work properly
I got my iPod touch 4th gen in April for my birthday and from the first day I used it the home button stuffs up, every time I open a app, use it and then go to exit I have to press the home button about 5 times before it exits. Has anyone else had th
-
Editing many photos at once with a subtlety
I don't know how to phrase this and maybe there's a thread that I've miss about that. So, that's why I'm counting on the community to help me. For this example, let say that I have two image. The first one is at -0,30 in Exposure and the second one i
-
Cannot open old Illustrator files (pre version 8) in CS4 trial
Hi I am thinking of upgrading from Illustrator CS2 to CS4. However, I have downloaded the trial version and have found that Illustrator CS4 cannot open old Illustrator files earlier than version 8 (pre 2000) whereas Illustrator CS2 had no problem wit
-
I'm not sure what to do.. this is really frustrating. I never had any issues with CC.