Error in RWB - Component Monitoring - Adapter Engine
Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PI
Hi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego
Similar Messages
-
In RWB----component monitoring --adapter engine-- status
Hi ,
In the Runtime work bench component monitoring if we click on adapter engine we get two tabls
CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... DetailsHi Sandeep,
Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
#1285224 - Http 404 error in details display for Adapter Engine
#804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
Hope it helps too
Regards,
Caio -
Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
JochenHi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen -
RWB - Component Monitoring - Integration Engines = none ???
Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100 (XI Server)
Technical System: DEV on dev60 (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role: Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish -
Component monitoring - adapter engine error, but no channel in error actual
Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
OlianHi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM -
Error in RWB Component Monitoring ... "Domain ???"
Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows <i>"Domain ???"</i> would anyone know what could be the problem?
Warm regards,
GlennHi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V -
RWB-Mesg Monitoring-Adapter Engine-Message Retention is only 1or2 days
Hello Experts,
I have a an Integrated Scenario, SOAP to RFC, in my landscape. As you know I can only monitor messages for an Integrated Scenario in Runtime Workbench -> Message Monitoring -> Adapter Engine. So, when I find my message related to the Integrated Scenario and click on "Message Details" I am not able to view the payload for any of these messages. I am sure there is somewhere on the Java stack flip the switch to view payload but not sure where. Any kind of help would be greatly appreciated.
Thank you!!Please follow steps as below...
1. Open http://server.domain.ext:5XX00/dir/start/index.jsp (Please modify according to your server name, domain URL and Port)
2. Navigate and open Runtime Workbench after you log on
3. Navigate and open Message Monitoring
4. Select appropriate Messages from Component: and From
5. You will able to see Refresh button then | View: and Time:
5. Drop down Time: and you will able to do selection there Hourly, Daily, Weekly, Monthly and Yearly...
Please let me know if you have any other question.
Regards,
Yogesh Patel -
Ping error in RWB for J2SE Adapter Engine
Hi,
we have several external J2SE adapter engines and they function great other than from a monitoring perspective. In RWB "Ping Status" I'm getting the following:
HTTP request failed. Error code: "401". Error message: "Authorization Required"
Suggestions?
Cheers,
Mattias<u>This is not an answer to your question.</u>
I've tried to get an answer for: how to register J2SE adapter with Integration Server ?
I tried using SLDAccess service on J2SE adapter with no luck (with this J2SE Adapter Engine is registered in the SLD). My J2SE adapter was never available in the configuration means, in the communication channel ex: file adapter, for the adapter engine drop down all I have is Integration Server, my J2SE adapter was never listed there.
If you know an answer please post.
thanks
SKM<u></u> -
SOAP messages not visible in RWB - Message Monitoring - Adapter Engine
Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
AndréHi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André -
CC problem in RWB Component monitoring
Hi people
i am getting this error in RWB component monitoring
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
But sender&receiver CC are STATE is ACTIVE status
Adapter Engine Server is RED mark
All object's r correct
PLS send me to ASAP
Thanks & Regards
shekarHi There,
It saying that one of you CC in error and remaing things are ok.
As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
the error may be occured some time back but it is still showing erro ..but everything works fine...
Regards
Rao -
Adapter Engine link disapperead from RWB - component monitoring screen
Hi.
I restarted PI.
After that, the "adpter engine" line (link) disapperead from the page RWB - component monitoring.
PI is running, it is exchanging data with Ecc and Thirdy Party systems.
How to solve the problem ?
To arrive to "defective" screen:
http://host:5xx00/rwb/index.jsp --> component monitoring --> component with status all --> display
Under domain xx, under integration server, there is no adapter engine line/link
Thanks !HI,
Check in SLD-> content maintenence-> XI adapter framework is registered or not...
If not thn register by performing the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
have a look on this...
PI 7.1: Problem with SLD configuration: Cannot find central Adapter Engine
Regds,
Pinangshuk. -
RWB Component Monitoring - Cache Connectivity Test failure
Hi,
I have done the Cache Connectivity test in RWB-Component monitoring.
For the Integration Server - Integration Engine XYZ.
I am getting error
Result of Self-Test
Can the SLD be reached? ... Details OK
Does the Integration Engine know the business system? ... Details OK
Are roles in SXMS_CONF_ITEMS and SLD consistent? ... Details Error
Is Web service security available? ... Details
The error message os
Details for 'Are roles in SXMS_CONF_ITEMS and SLD consistent?'
Inconsistent roles. System Landscape: Integration Server. SXMSGLOBAL: Application System
How to solve this issue.
Regards
FarhatHi
Use Tcode SXMB_ADM -> integration engine ,Assign proper Client to Integration Server.
look this similar thread
Are roles in SXMS_CONF_ITEMS and SLD consistent? -
PI 7.1 - Message Monitoring - Adapter Engine (Database Overview)
Hi Friends,
In Message Monitoring --> Adapter Engine --> Database (Overview) is not working. It throws the following error message.
no_connection Exception Message: RemoteException in Method: CentralViewManager: getIProfiles( IApplication, boolean ). Communication-related failure. Message: java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: An error occured while reading data from the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document. The error was: com.sap.security.core.server.destinations.api.DestinationException An error occurred while reading the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document, type WebService. The error was Internal error during the decryption process...
But, Adapter Engine --> Database option is working. What could be the problem ?
Kindly clarify, friends.
Kind regards,
Jegathees P.Hello friend,
May be it is related with connection problem check with your basis people .
Regards,
Ravi. -
How to integrate CCMS with RWB component monitoring
Hi, all.
I am wondering if there is a way to forward errors from the component monitoring and CC monitoring in RWB to CCMS. For example, if a CC is down because somebody changed the CC user or password or disable the CC totally, RWB will show errors in the communication channel monitoring. However, I could not find a way to forward those messages to CCMS so that we can manage it in a centralized way. Any idea?
Thanks,
Jonathan.
Edited by: Jonathan Ma on Nov 4, 2011 9:50 PMHI, look this...
CCMS Heartbeat... RWB
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II
But First, you'll need all of this..
how to coonfigure CCMS Alerts and Alert Categories and Alert Rules
Regards! -
Error : no_adapter_engine_found: Unable to find Adapter Engine
Hi All:
I applied SP 20 in XI 3.0 (from SP9), but when I test the File to File scenario I am getting an Error : *no_adapter_engine_found: Unable to find Adapter Engine* in SXMB_MONI.
Here it the complete Error log
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Call Adapter
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_adapter_engine_found: Unable to find Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can any one help me, so I can resolve this ASAP?
Thanks
Farooq.Hi ,
I got the same error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the problem
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay
Maybe you are looking for
-
10.6 and windows server 2003
I am trying to get our first iMac set up on the network at my work and am having trouble. It seems its unable to see or connect to and shares on the network. I tried going to Go/Connect to server and then putting in our server's IP address. It comes
-
BI Admin Cockpit: Program variant missing in Process chain
Hi, I'm installing BI Admin Cockpit and have troubles with Process chains. I followed the installatin guide and had problems activating process chains: 0TCT_C2_INIT_P01 and 0TCT_MD_C_FULL_P01 because of missing InfoPackages. I solved this by installi
-
IDVD 5.01 Sony DVD players
Just used iDVD 5.01 for building a DVD project. Many of the duplicates were returned as they did not play with many Sony brand DVD players. This product should not be used for any commerical purposes.
-
Programmatically selecting Item in drop down
I want to Programmatically select an item in a dropdown when the page is loaded. I am using the following code: <h:selectOneMenu binding="#{CatByLocTrend.predefinedQueryDropdown}" id="predefinedQueryDropdown" style="height: 21px; width: 133px; font-f
-
Obsolete Keywords from SAP version 4.6C to ECC 6.0
Hi , I want to upgarde my sap system from version 4.6c to ECC 6.0. Can anyone provide me the list of obsolete keywords that are in 4.6c and the new keyword for tht in ECC6.0? Thanks in advance