Error in RZ20 - 06355 Purchasing organization QRP1 not allowed for plant 1
Hi all,
We have setup a new purchasing organisation in SRM 4.00.
I have got all my vendors in now and plants, how do i assign the plant to the correct Purchas org?
I can create a cart but i get the message 06355 Purchasing organization XXXX not allowed for plant YYYY
any ideas guys?
Regards
Steve
Hi, Steve
This is a backend error, check the following in backend.
(tr:SPRO)
Enterprise Structure
Assignment
Materials Management
Assign purchasing organization to plant
Regards
Lauren
Similar Messages
-
SAP MM Rounding Profile not allowed for plant in sales org data 1-Quantity stipulation
Hi
I have created rounding profile in OWD1 for a particular plant and it is showing IN material master MRP DATA1 area. But when i am trying to assign in sales :sales org1 data under quantity stipulation area there is no profile . Is there any specific plant assignment for sales area data?
Kindly guide me.
GaneshHi,
The material master sales data 1 is not plant specific generally. You may create a rounding profile in OWD1 without plant and then the same will be visible in the F4 list in sales data 1. If the rounding profile is plant specific, you have to maintain the delivering plant in material master - sales data 1.
Regards,
AKPT -
Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr
Hi Gurus,
When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
Message no: MEPO140
Note:
The STO is creating with out error in ECC 5.0 for the above scenario but when i'm trying the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
Thanks in advance,
SaiHi Charlie
I had same issue and we sloved it. but i have one more issue here.
We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
thanks,
Raju -
Error : Wage Type is not allowed for personnel SG grouping for WT 3
Hi All,
When i am trying to create wage type Degree allowance i am getting error like below.
WT xxxx is not allowed for personnel SG grouping for WT 3 (from 01.09.2006 to
31.12.9999)
Message no. PG 074
Diagnosis
In the "Personnel Subgroup Grouping for Primary Wage Types" view
(V_001P_K), the employee is assigned to personnel SG for primary wage
types 3. However, this grouping is not valid for wage type xxxx in the
period from 01.09.2006 to 31.12.9999.
Please let me know where i needs to check.
Thanks.try to change the start date and try like 01.01.1990 like this
juss chk and update -
IT 9 error "Payment method cheque in IN not allowed for payment to Persons"
Dear Experts
I am unable to give 'C' (Cheque) in Payment Method field in IT0009 (Bank Detail)
It might be B'cos of availability of two options only
ie
By cash or by (ii) Transfer Not by Cheque ie 'C'.
When I give 'C' Value I get error message
"Payment method cheque in IN not allowed for payment to Persons"
Kindly suggest how to input 'C'
Rgds
Kamal SinghDear Dilek
I could find out the Ans by the Procedure you told me .
I could give value 'C' (Cheque) in Payment Method
Thanx
Rgds
Kamal Singh -
I have created scripted calculation view
I can add parameter in aforesaid calculation view
It fetches me right result
But when I am to call aforesaid calculation view from odata service I am getting following error:
ERROR zcustsearch/services/AutoComplete.xsodata
Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
Any solutionsDon't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object. This means no schema and use package path::view name. Like this example from the SHINE content:
service namespace "sap.hana.democontent.epmNext" {
"sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
as "salesYear"
keys generate local "ID"
aggregates always
parameters via entity "InputParams"; -
Limit PO Err Combination of GR/IR control not allowed for external services
Hi,
I am having a problem while replicating free text Limit PO's to R/3 in SRM 4.0 SP 13. The issue is while creating Free Text Limit SC with the "Confirmation and Invoice" option checked in, the PO's get created in SRM but fails while replicating to R/3 and in RZ20 errors as "Combination of GR/IR control not allowed for external services" although in vendor master i don't have check for the field "GR-Based Invoice Verification".
On the contrary while creating SC with the "Invoice Only" the PO is successfully replicated to R/3 with item category as B for limit orders.
Now i have noticed if i make changes in the vendor master data i.e. check the flag "GR-Based Invoice Verification" then the PO in my first scenario gets replicated successfully and also with respect to the second scenario but it gets replicated in both the scenarios as item category "D".
As far as SRM standard it should have ideally behave like the below:
Limit SC with GR AND Invoice -> item category D
Limit SC with invoice only -> item category B.
Now my question is why do my PO's fail in R/3 in the first scenario and also if i check the flag in vendor master for GR-Based Invoice verification then in the second scenario the item category is "D" instead of "B".
Thanks in Advance.
Best Regards
AnirbanHi Georg,
We don't have any active implementation for the BADI BBP_PO_INBOUND_BADI.
Best Regards,
Anirban -
EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER
Dear All,
While creating vendor excise invoice by Tcode: J1IEX it is throwing error AS MENTIONED BELOW,
EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER
Kindly help in this matter.
Regards
AJIT K SINGHHi
Check the series group which your giving in J1iex.. Has it been assign to to Excise registration of Plant. And you have given us the Message number and application area. If it is a customized message then you need debug with Abaper.
Regards
Antony -
Limit PO :Combination of GR/IR is not allowed for external services
Hi,
we are working in SRM40 sp09 & back end ECC.50
In the Limit PO:
we are able to create Limit PO from a shopping cart.The follow on documents in ECC, it is creating a PO with Item category "B" and the "invoices" are only possible.
The Issue:
The Client wants the Confirmation/GR functionality to be enabled and the Invoices.
but for Limit PO, with follow on documents--"Confirmation" is checked, we have a error messagecombination of GR/IR is not allowed for external services".
Is there any addition configuration or steps involved.
Thanks and Regards,
RK.Hi
<b>Please go through the links below, which address the same issue -></b>
Limit PO(Item category D instead of B)
SRM: Item category B/D for limit PO
Re: Problem with Unknown account assignment with limit order...reply soon...
Do let me know.
Regards
- Atul -
ORA-56901: non-constant expression is not allowed for pivot|unpivot values
Getting following errors
ORA-56901: non-constant expression is not allowed for pivot|unpivot values
ORA-06512: at "APPS.PIVOT_AWARD", line 16
ORA-06512: at line 5
when i run the following function it is giving error as above.
can you please help me
create or replace
Function Pivot_award return sys_refcursor
IS
v_dept VARCHAR2 (20000);
v_query VARCHAR2 (1000);
op_rs sys_refcursor;
BEGIN
SELECT LISTAGG(award_number,',') WITHIN GROUP (ORDER BY award_id)
INTO V_DEPT FROM xxdl.XXDL_CD_SCHEDULE_K_GTT ;
v_query :=
'SELECT *
FROM (
select award_name, award_id,award_number from xxdl.XXDL_CD_SCHEDULE_K_GTT)
PIVOT(max(VAL) for award_number in ('||v_dept||'))';
OPEN op_rs FOR v_query;
return op_rs;
END;
SELECT LISTAGG(award_number,',') WITHIN GROUP (ORDER BY award_id)
INTO V_DEPT FROM xxdl.XXDL_CD_SCHEDULE_K_GTT ;
Result of 1st query is PPE_T_CAPITAL,XIBNG,XIABP,XIABQ,XIABR,XIABS,XIABT,XIABU,XIABV,XIABW,XIAAE,XIAAF,XIAAG,XIAAH,XIAAI,XIAAJ,XIAAK,XIAAL,XIAAM,XIAAN,XIAAO,XIAAP,XIAAQ,XIAAR,XIAAS,XIAAU,XIAAU,XIAAV,XIAAZ,XIABD,XIABE,XIABF,XIABG,XIABH,XIABI,XIABJ,XIABK,XIABL,XIABM,XIABN,XIAAA,XIAAB,XIAAC,XIAAD,XIABY,XIABZ,XIACA,XIACB,XIACC,XIACD,XIACE,XIACF,XIACG,XIACH,XIACI,XIABA,XIAAW,XIAAX,XIAAY,XIACN,XIACT,XIACU,XIACP,AAAEX,XIACW,XIADCHi Frank,
Here is the create table and insert script. This is needed for me to show in report rows to columns.
create table award_test(
AWARD_NUMBER VARCHAR2 (15) ,
AWARD_NAME VARCHAR2(30) ,
TOTAL_PROCEEDS NUMBER ,
EARNING_PROCS NUMBER ,
TOT_PROCS_EARNINGS NUMBER ,
GROSS_PROCS NUMBER ,
PROC_REF_DEF_ESCR NUMBER ,
OTH_UNSP_PROCS NUMBER ,
ISSUANCE_COST NUMBER ,
WORK_CAP_EXP NUMBER
--insert script
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAE','CEFA CP',300000000,200,300000200,300,500,600,0,700);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABG','CEFA K',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAS','Escondido Village #3',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('AAAEX','SU2009A',801806000,null,801806000,null,null,null,1806000,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABI','CEFA L-6',17815000,null,17815000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAP','CEFA R',115050508.15,null,115050508.15,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACG','CEFA D',53150000,null,53150000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAB','Stu Union-1962',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAA','Notes Payable-Commercial Paper',350000000,null,350000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABZ','CEFA L-3',9840000,null,9840000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAV','CEFA B',18106540,null,18106540,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAI','Medium Term Notes - Tranche 3',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAZ','Recycling Pool',473379904.44,null,473379904.44,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAY','CEFA T2',187550000,null,187550000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAM','GMAC',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAU','CEFA A/K',16922982,null,16922982,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAC','SU TB 2002A - PARS',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABL','CEFA L-9',15490000,null,15490000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABY','CEFA L-2',8775000,null,8775000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAJ','Frat 1&2',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAW','CEFA S',180727500,null,180727500,null,null,null,-472500,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAQ','Escondido Village #1',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACW','CEFA U',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACF','CEFA E',19753227.34,null,19753227.34,null,null,null,-106772.66,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACN','CEFA T3',27562758.96,null,27562758.96,null,null,null,-47941.04,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAG','Medium Term Notes - Tranche 1',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('PPE_T_CAPITAL','PPE_T_CAPITAL',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAK','Frat 3',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAF','Tresidder',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABH','CEFA L',5055000,null,5055000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAU','CEFA A/K',6605655,null,6605655,null,null,null,-74345,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAD','SU 2024 Bonds',150000000,null,150000000,null,null,null,0,null);Expected output rows to columns (i took first two insert statements)
'XIAAE','CEFA CP',300000000,200,300000200,300,500,600,0,700
'XIABG','CEFA K',0,null,0,null,null,null,0,null
I need to have awardnumber and corresponding details below
'XIAAE' 'XIABG'
'CEFA CP' 'CEFA K'
300000000 0
200 null
300000200 0
This way i need to get all the information vertically with awardnumber. I have written following code but it is not working.
create or replace
Function Pivot_award return sys_refcursor
IS
v_dept VARCHAR2 (20000);
v_query VARCHAR2 (1000);
op_rs sys_refcursor;
BEGIN
SELECT LISTAGG('''' || award_number || '''',',') WITHIN GROUP (ORDER BY award_number)
INTO V_DEPT FROM award_test ;
v_query :=
'SELECT * from award_test
UNPIVOT(VAL for operator in(
AWARD_NAME,
TOTAL_PROCEEDS,
EARNING_PROCS ,
TOT_PROCS_EARNINGS ,
GROSS_PROCS ,
PROC_REF_DEF_ESCR ,
OTH_UNSP_PROCS ,
ISSUANCE_COST ,
WORK_CAP_EXP ))
PIVOT(max(VAL) for award_number in ('||v_dept||'))';
OPEN op_rs FOR v_query;
return op_rs;
END;throwing an error ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.PIVOT_AWARD", line 11
ORA-06512: at line 5
also when i run simple query
SELECT * from award_test
UNPIVOT(VAL for operator in(
AWARD_NAME,
TOTAL_PROCEEDS,
EARNING_PROCS ,
TOT_PROCS_EARNINGS ,
GROSS_PROCS ,
PROC_REF_DEF_ESCR ,
OTH_UNSP_PROCS ,
ISSUANCE_COST ,
WORK_CAP_EXP ))
PIVOT(max(VAL) for award_number in ('PPE_T_CAPITAL','XIBNG','XIABP')) Throwing an error
ora-01790 Expression must have same datatype as correspoding expression
Edited by: 893185 on Nov 10, 2011 2:00 PM -
Status profile not allowed for object type
hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
RameshRamesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type. -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct
I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
-Jay-
Post relates to: Treo Pro T850 (Sprint)
This question was solved.
View Solution.audiojay11 wrote:
P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
Try adding it to the server name, e.g.: smtp.provider.com:587 -
I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?
Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling -
Combination of GR/IR Control not allowed for External Services-SRM PO error
Hi All,
SRM 5.0 ECS R/3 4.6C
We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
The PO is in error in process at this moment. And is not in R/3
On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
Confirmation-Related Invoice Verification is not checked. Any thoughts on this!!
Thanks
KrishnaHi
<u>Please go through the following SAP OSS Notes -></u>
Note 725824 - MB5S: Error with purchase orders for external service
Note 781014 - Clearing values in purchase order currency are too high
Note 991800 - MB5S: Error in delivery costs (2)
Note 960789 - Wrong Values in MM Document for Service Based Invoice
Note 778562 - MM-IV: invoices are entered before the goods receipt
Note 578531 - Incorrect FM update for service purchase orders
Note 635864 - ME2S: Invoice value is calculated incorrectly
Note 570409 - Unplanned account assignment in invoice for service PO
Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
Do let me know.
Regards
- Atul
Maybe you are looking for
-
Dual Boot Windows 7 with preinstalled Windows 8 on GPT-formatted hard disk and UEFI BIOS.
Question for Jordon Wees, Hi, You wrote: I can successfully install both operating systems in UEFI mode, with Windows 7 on the first partition and Windows 8 on the second partition. <o:p></o:p> But I couldn´t!<o:p></o:p> Could you please provide me h
-
What's wrong with my Mac App store.
It says I have insufficient funds for my purchase for Grand Theft Auto: San Andreas ($14.99). But I have more than enough money to buy it($15.31). What's going on
-
Simple question: COMPUTE_BCD_OVERFLOW - how solve?
Hi, I have a really simple problem but in the moment I can't find the right solution, so I hope you can give me a hint... I try to calculate a percentage-value based on 2 given amounts (of money). So my codings looks like this: diff_amount = amount
-
I am having difficulty entering a user exit, M06B0002, function EXIT_SAPLEBND_001 include ZXM06U13. It should allow me to set CEBAN-USRC1 a user field which would allow me to determine the release strategy using this as a classification. The system
-
We have several groups making changes to roles in our portal. Is there a way to track roles changes and where can I find this information. We have several plants and portal admins at each site making changes to "shared roles". I need to track these c