Error in SAP IDES

Hi,
I have re installed SAP IDES and facing error as shown in screenshot below .
On clicking ECC asset balance it is showing following error after input of username and password .
As required after " ECC asset balance" i need to start "sap management console" and there after login in SAP using "SAP logon "
Please guide me what needs to be done so as to solve error
-kaushal G

Hello Jasleen,
It should be ok to install a SAP System on 64 bit hardware with 32 bit OS.
Based on the error "FSL-02015", it looks like there is a problem
locating where the data is stored. Can you check to see where the export
CD's were copied on the local drive? Please also check to ensure that
there are no spaces or special characters in the folder name - if there are,
you should rename the folder to a shorter name, which does not contain
any spaces/special characters and restart the installation again.
please also make sure the os/db/kernel combination is supported for
R3 Enterprise 4.7 200 SR1 by checking http://service.sap.com/pam
Kind regards,
Qingqing Wang

Similar Messages

Adaptive RFC 2 gives error: com/sap/ide/jco/service/internal/R3Service

Hi,
I've run into the following problem about NWDS. This happens as I create a Model. It appears there is a new version of the Adaptive RFC Model, which is called Adaptive RFC 2 Model.
1. Right click on Models, and select Create.
2. Double Click on Adaptive RFC 2 Model
3. The error pops up. It says "An error has occurred. See error log for more details. java.lang.NoClassDefFoundError". Then if you click details you get "An error has occurred. See error log for more details. com/sap/ide/jco/service/internal/R3Service "
If you know which log to have a look, or what this error is about please let me know urgently. Any help if much appreciated.
Thanks,
Ogeday Isiklar

Hi,
I am also getting same problem. Waiting for solution
Regards,
Pradeep Kumar

Error installing SAP IDES 6.00

Dear guys,
I'm installing SAP IDES 6.00 in VMWare with Win Server 2003, 2GB RAM. My laptop Spec are 4GB RAM, Core2Duo. I'm installing SAP 6.00 in external hard drive 1 TB. I have been trying for 5 times. And found the same problems in import ABAP. Only 7 completed. Before that only 4. All in the same step.This is the error message RROR      2020-06-30 12:18:31
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR      2020-06-30 12:18:31 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Do you think we can run SAP 6.00 in VMware? i want to install SCM too. it is better SCM 5.0 with IDES 4.71 or 6? Does anyone here ever try IDES 4.71 in Win XP Pro SP2? I read from other forum, SAP IDES 6.00 can run in Win XP Pro SP3
Thanks for the answer

> But i read from VMware website, they support oracle.
Yes - but not vice versa. Oracle does not allow running databases on VMWare:
https://www.sdn.sap.com/irj/sdn/virtualization
--> Partner Virtualization Supported by SAP
Here read "Note 1173954 - Support of Oracle for VMWare and XEN"
Apart from that you should just read what you posted as error message:
> CJSlibModule::writeError_impl()
> CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
import_monitor.log.
Did you check those logfiles?
Markus

Error in installation of SAP IDES 4.7 in windows 2000 server

hi i m getting error in sap ides 4.7 installation i m giving here error log and my environment variables list..can anyone help me ...
Following is list of Environment varialbes...
VARIABLE     VALUE
DBMS_TYPE     ORA
DBS_ORA_SCHEMA SAPO02
dbs_ora_tnsname o02
JAVA           D:\JDK1.3.1_03\BIN
NLS_LANG     AMERICAN_AMERICA.WE8DEC
ora          D:\oracle\o02\917\bin\sqlplus.exe
ORACLE_HOME     D:\ORACLE\O02\917
ORACLE_SID     O02
PATH          D:\usr\sap\o02\SYS\exe\run
SAPDATA_HOME     D:\oracle\o02
SAPEXE          D:\usr\sap\o02\SYS\exe\run
SAPLOCALHOST     nainesh
TEMP          D:\WINNT\TEMP
TMP          D:\WINNT\TEMP
Getting error in this step...
oracle pre-load action.
Following is log file....at last error is indicated....:---
INFO 2008-02-17 13:03:01
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2008-02-17 13:03:14
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2008-02-17 13:03:27
Copying file E:/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2008-02-17 13:03:27
Creating file D:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2008-02-17 13:04:28
Copying file C:/sap-source/exp1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2008-02-17 13:04:28
Creating file D:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2008-02-17 13:04:28
Copying file system node C:\sap-source\exp1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2008-02-17 13:04:28
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2008-02-17 13:04:29
Copying file C:/sap-source/exp1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2008-02-17 13:04:29
Creating file D:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2008-02-17 13:04:29
Copying file system node C:\sap-source\exp1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2008-02-17 13:04:29
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2008-02-17 13:04:29
Moving file D:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2008-02-17 13:04:29
Moving file D:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2008-02-17 13:04:29
Removing file D:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2008-02-17 13:05:14
Package table created
PHASE 2008-02-17 13:05:49
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2008-02-17 13:05:49
SAP Web Application Server
PHASE 2008-02-17 13:05:49
Request common parameters of SAP System
PHASE 2008-02-17 13:05:49
Create operating system accounts
INFO 2008-02-17 13:05:50
Copying file D:/SAPinst ORACLE KERNEL/keydb.xml to: D:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2008-02-17 13:05:50
Creating file D:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2008-02-17 13:05:51
Copying file D:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: D:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2008-02-17 13:05:51
Creating file D:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2008-02-17 13:05:51
Copying file D:/SAPinst ORACLE KERNEL/DBSIZE.XML to: D:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2008-02-17 13:05:51
Creating file D:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2008-02-17 13:05:51
Changing account ACCOUNTID=S-1-5-21-1993962763-1454471165-725345543-1004 ACCOUNTNAME=nainesh\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-02-17 13:05:51
Changing account ACCOUNTID=S-1-5-21-1993962763-1454471165-725345543-1005 ACCOUNTNAME=nainesh\SAP_O02_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-02-17 13:05:51
Changing account ACCOUNTID=S-1-5-21-1993962763-1454471165-725345543-1006 ACCOUNTNAME=nainesh\SAP_O02_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-02-17 13:05:51
Changing account ACCOUNTID=S-1-5-21-1993962763-1454471165-725345543-1007 ACCOUNTNAME=ORA_O02_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata2\roll_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata3\temp_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata1\system_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-02-17 13:07:20
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2008-02-17 13:07:21
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-02-17 13:07:22
Removing file D:/ORACLE/O02/917/database/initO02.ora.bak.
INFO 2008-02-17 13:07:22
Moving file D:/ORACLE/O02/917/database/initO02.ora to: D:\ORACLE\O02\917/database/initO02.ora.bak.
INFO 2008-02-17 13:07:22
Creating file D:\ORACLE\O02\917\database\initO02.ora.
INFO 2008-02-17 13:07:24
Removing file D:/ORACLE/O02/917/database/initO02.sap.bak.
INFO 2008-02-17 13:07:24
Moving file D:/ORACLE/O02/917/database/initO02.sap to: D:\ORACLE\O02\917/database/initO02.sap.bak.
INFO 2008-02-17 13:07:24
Creating file D:\ORACLE\O02\917\database\initO02.sap.
INFO 2008-02-17 13:07:26
Removing file D:/ORACLE/O02/917/database/initO02.dba.bak.
INFO 2008-02-17 13:07:26
Moving file D:/ORACLE/O02/917/database/initO02.dba to: D:\ORACLE\O02\917/database/initO02.dba.bak.
INFO 2008-02-17 13:07:26
Copying file E:/NT/COMMON/INSTALL/INITSID.DBA to: D:\ORACLE\O02\917/database/initO02.dba.
INFO 2008-02-17 13:07:26
Creating file D:\ORACLE\O02\917\database\initO02.dba.
INFO 2008-02-17 13:07:27
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02_1/o02.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_2/o02.data2.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_3/o02.data3.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_4/o02.data4.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02_5/o02.data5.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02_6/o02.data6.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02_7/o02.data7.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02_8/o02.data8.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_1/o02620.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_2/o02620.data2.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_3/o02620.data3.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02620_4/o02620.data4.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02620_5/o02620.data5.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02620_6/o02620.data6.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02620_7/o02620.data7.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_8/o02620.data8.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_9/o02620.data9.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_10/o02620.data10.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata2\roll_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata3\temp_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
File system node D:\oracle\O02/sapdata1\system_1 exists already. Nothing to do.
INFO 2008-02-17 13:07:20
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-02-17 13:07:20
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2008-02-17 13:07:21
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2008-02-17 13:07:22
Removing file D:/ORACLE/O02/917/database/initO02.ora.bak.
INFO 2008-02-17 13:07:22
Moving file D:/ORACLE/O02/917/database/initO02.ora to: D:\ORACLE\O02\917/database/initO02.ora.bak.
INFO 2008-02-17 13:07:22
Creating file D:\ORACLE\O02\917\database\initO02.ora.
INFO 2008-02-17 13:07:24
Removing file D:/ORACLE/O02/917/database/initO02.sap.bak.
INFO 2008-02-17 13:07:24
Moving file D:/ORACLE/O02/917/database/initO02.sap to: D:\ORACLE\O02\917/database/initO02.sap.bak.
INFO 2008-02-17 13:07:24
Creating file D:\ORACLE\O02\917\database\initO02.sap.
INFO 2008-02-17 13:07:26
Removing file D:/ORACLE/O02/917/database/initO02.dba.bak.
INFO 2008-02-17 13:07:26
Moving file D:/ORACLE/O02/917/database/initO02.dba to: D:\ORACLE\O02\917/database/initO02.dba.bak.
INFO 2008-02-17 13:07:26
Copying file E:/NT/COMMON/INSTALL/INITSID.DBA to: D:\ORACLE\O02\917/database/initO02.dba.
INFO 2008-02-17 13:07:26
Creating file D:\ORACLE\O02\917\database\initO02.dba.
INFO 2008-02-17 13:07:27
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02_1/o02.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_2/o02.data2.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_3/o02.data3.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02_4/o02.data4.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02_5/o02.data5.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02_6/o02.data6.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02_7/o02.data7.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02_8/o02.data8.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_1/o02620.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_2/o02620.data2.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/o02620_3/o02620.data3.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02620_4/o02620.data4.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/o02620_5/o02620.data5.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02620_6/o02620.data6.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/o02620_7/o02620.data7.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_8/o02620.data8.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_9/o02620.data9.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02620_10/o02620.data10.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata4/o02usr_1/o02usr.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata2/roll_1/roll.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata3/temp_1/temp.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/system_1/system.data1.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/sapdata1/cntrl/cntrlO02.dbf.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/saparch/cntrl/cntrlO02.dbf.
INFO 2008-02-17 13:07:36
Removing file D:/oracle/O02/origlogA/cntrl/cntrlO02.dbf.
INFO 2008-02-17 13:07:37
Moving file D:/ORACLE/O02/917/database/initO02.ora to: orig_init_ora_tmp.txt.
INFO 2008-02-17 13:07:37
Moving file D:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\ORACLE\O02\917\database\initO02.ora.
INFO 2008-02-17 13:07:37
Removing file D:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2008-02-17 13:07:38
Creating file D:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2008-02-17 13:07:38
See 'D:\ORACLE\O02\917/bin/oradim -new -sid O02 -STARTMODE auto' output in 'D:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2008-02-17 13:07:38
'D:\ORACLE\O02\917/bin/oradim -new -sid O02 -STARTMODE auto' returned with '20'.
INFO 2008-02-17 13:07:39
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:07:40
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:07:49
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:08:35
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:08:39
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:09:44
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:09:49
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:33
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:38
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:40
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:41
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:42
Moving file D:/ORACLE/O02/917/database/initO02.ora to: orig_init_ora_tmp.txt.
INFO 2008-02-17 13:14:42
Moving file D:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\ORACLE\O02\917\database\initO02.ora.
INFO 2008-02-17 13:14:42
Removing file D:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2008-02-17 13:14:43
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:14:43
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:15:58
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:15:59
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:17:11
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:17:12
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:18:24
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:18:25
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:19:03
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:19:04
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:20:15
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:20:16
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:21:29
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:21:30
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:22:43
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:22:44
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:23:58
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:23:58
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:25:11
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:25:12
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:26:32
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:26:35
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:27:17
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:27:20
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:28:32
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:28:35
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:29:46
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:29:49
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:31:02
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:31:05
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:32:16
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:32:19
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:33:31
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:33:34
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:34:46
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:34:46
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:00
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:01
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:04
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:05
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:31
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:32
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:44
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:45
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:46
Moving file D:/ORACLE/O02/917/database/initO02.ora to: orig_init_ora_tmp.txt.
INFO 2008-02-17 13:36:46
Moving file D:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\ORACLE\O02\917\database\initO02.ora.
INFO 2008-02-17 13:36:46
Removing file D:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2008-02-17 13:36:47
Creating file D:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2008-02-17 13:36:50
See 'D:\ORACLE\O02\917/bin/lsnrctl stat' output in 'D:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2008-02-17 13:36:50
'D:\ORACLE\O02\917/bin/lsnrctl stat' returned with '3'.
INFO 2008-02-17 13:36:50
Creating file D:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2008-02-17 13:36:51
See 'D:\ORACLE\O02\917/bin/lsnrctl start' output in 'D:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2008-02-17 13:36:51
'D:\ORACLE\O02\917/bin/lsnrctl start' returned with '0'.
INFO 2008-02-17 13:36:56
Copying file E:/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2008-02-17 13:36:56
Creating file D:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2008-02-17 13:36:57
Changed working directory to D:\SAPinst ORACLE KERNEL.
INFO 2008-02-17 13:36:57
Changed working directory to D:\SAPinst ORACLE KERNEL.
ERROR 2008-02-17 13:37:02
CJS-00084 SQL Statement or Script failed. Error Message: Executable D:\ORACLE\O02\917/bin/sqlplus.exe returns 3.
ERROR 2008-02-17 13:37:02
FJS-00012 Error when executing script.
Thanks & Regards,
Nainesh.

Thank you very much
HI dear,
I found tht file i m pasting log of tht file here tell me whr is problem.
================================================================================
2008-06-29, 03:46:17 SAPINST ORACLE start logging for
connect / as sysdba ;
SHUTDOWN ABORT;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:46:17 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
ORA-12560: TNS:protocol adapter error
SAPINST: End of output of SQL executing program E:\oracle\ora92/bin/sqlplus.exe.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2008-06-29, 03:46:18 SAPINST ORACLE stop logging
================================================================================
2008-06-29, 03:46:26 SAPINST ORACLE start logging for
connect / as sysdba ;
SHUTDOWN ABORT;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:46:26 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.2.1 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.2.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\ora92/bin/sqlplus.exe.
2008-06-29, 03:46:26 SAPINST ORACLE stop logging
================================================================================
2008-06-29, 03:46:27 SAPINST ORACLE start logging for
connect / as sysdba ;
STARTUP NOMOUNT;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:46:27 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 309606996 bytes
Fixed Size               453204 bytes
Variable Size            150994944 bytes
Database Buffers       156966912 bytes
Redo Buffers              1191936 bytes
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.2.1 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.2.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\ora92/bin/sqlplus.exe.
2008-06-29, 03:46:30 SAPINST ORACLE stop logging
================================================================================
2008-06-29, 03:46:30 SAPINST ORACLE start logging for
connect / as sysdba ;
CREATE DATABASE D11 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET WE8DEC NATIONAL CHARACTER SET UTF8 DATAFILE 'E:\oracle\D11/sapdata1\system_1\system.data1' SIZE 350M REUSE AUTOEXTEND OFF
LOGFILE GROUP 1 ('E:\oracle\D11\origlogA\log_g11m1.dbf', 'E:\oracle\D11\mirrlogA\log_g11m2.dbf') SIZE 50M REUSE,
GROUP 2 ('E:\oracle\D11\origlogB\log_g12m1.dbf', 'E:\oracle\D11\mirrlogB\log_g12m2.dbf') SIZE 50M REUSE,
GROUP 3 ('E:\oracle\D11\origlogA\log_g13m1.dbf', 'E:\oracle\D11\mirrlogA\log_g13m2.dbf') SIZE 50M REUSE,
GROUP 4 ('E:\oracle\D11\origlogB\log_g14m1.dbf', 'E:\oracle\D11\mirrlogB\log_g14m2.dbf') SIZE 50M REUSE
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:46:30 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Database created.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.2.1 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.2.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\ora92/bin/sqlplus.exe.
2008-06-29, 03:47:12 SAPINST ORACLE stop logging
================================================================================
2008-06-29, 03:47:13 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT SYSTEM/MANAGER;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:47:13 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ERROR:
ORA-06553: PLS-213: package STANDARD not accessible
Error accessing package DBMS_APPLICATION_INFO
Connected.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.2.1 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.2.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\ora92/bin/sqlplus.exe.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2008-06-29, 03:47:14 SAPINST ORACLE stop logging
==============================================================
2008-06-29, 03:47:14 SAPINST ORACLE start logging for
connect / as sysdba ;
@@E:\oracle\ora92/rdbms/admin/catalog.sql
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.2.0 - Production on Sun Jun 29 03:47:14 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Package created.
Package body created.
Grant succeeded.
Package created.
Synonym created.
Grant succeeded.
Table created.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
Package created.
Package body created.
No errors.
Synonym created.
Package created.
Package body created.
No errors.
0 rows deleted.
1 row created.
Commit complete.
PL/SQL procedure successfully completed.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.
View created.
Synonym created.
Grant succeeded.

SAP Ides ECC 6.0 Install: Import ABAP - Package SAPDODS Error - ORA-00903

Experts,
Good Morning!
I'm trying to install SAP IDES ECC 6.0 version on a Windows 2008 R2 Server with Oracle 11g DB (11.2).
System Info: 16GM RAM & 600GB Hdd. Prereqs passed.
I'm getting the following error during the Import ABAP phase (16 of 29) in the sapinst log:
"An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. "
Here's the dump of import_monitor.java.log
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.012)
SAP Java Server VM (build 4.1.012 1.6-b03, Oct 21 2011 14:18:45 - 41_REL - optU - windows amd64 - 6 - bas2:161688 (mixed mode))
Import Monitor jobs: running 1, waiting 1, completed 141, failed 0, total 143.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 141, failed 1, total 143.
Here's the dump of import_monitor.log:
INFO: 2014-07-05 13:42:53
Data codepage 4103 is determined using TOC file 'C:\Target\Export1\DATA\D010TAB.TOC' for package 'D010TAB'.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2014-07-05 13:42:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2014-07-05 13:42:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2014-07-05 13:43:21
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2014-07-05 13:43:21
1 error(s) during processing of packages.
INFO: 2014-07-05 13:43:21
Import Monitor is stopped.
Here's the log of SAPDODS...
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140705134253
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Aug 16 2011 02:26:36
patchinfo (patches.h): (0.098) DB6: correction for R3load PL 91 on HP-UX and SOLARIS (note 1609719)
process id 1488
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/SQLFiles.LST
(SQL) INFO: C:\Target\Export1\DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: found C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: Trying to open C:\Target\Export1\DB/ORA/DODS.SQL
(SQL) INFO: C:\Target\Export1\DB/ORA/DODS.SQL opened
(DB) ERROR: DDL statement failed
(DROP TABLE "/BI0/APERS_BOD00")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 903 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00903 occurred at SQL stmt (parse error offset=15)
(DB) ERROR: DDL statement failed
( CREATE TABLE [/BI0/APERS_BOD00] ( [TCTUSERNM] nvarchar(000012) NOT NULL , [TCTOBJVERS] nvarchar(000001) NOT NULL , [TCTSYSID] nvarchar(000010) NOT NULL , [TCTQUACT] nvarchar(000001) NOT NULL , [TCTOBJNM] nvarchar(000040) NOT NULL , [TCTTLOGO] nvarchar(000004) NOT NULL , [RECORDMODE] nvarchar(000001) NOT NULL , [TCTTIMSTMP] nvarchar(000014) NOT NULL ) WITH ( DATA_COMPRESSION = PAGE ) )
DbSlExecute: rc = 99
(SQL error 903)
error message returned by DbSl:
ORA-00903: invalid table name
(DB) INFO: disconnected from DB
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140705134254
FYI - A retry does not help. Also tried to search for the error on scn, google but haven't been able to find the right solution.
Can you help?
Regards,
Cobain.

Divyanshu - sorry to ask but can you explain why i need to update r3load and r3trans to resolve this error? Just want to understand why I'm doing a correction so I can learn from the same.
Also, can you clarify the file update process:
For R3load:
a) the r3load used by the command is dated 8/16/2011 (location:C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\...)
b) the r3load i have in my db folder is dated 10/23/2011 (location:C:\Final\Installer\BS7i2011_Installation_Master_\DATA_UNITS\BS2011_IM_WINDOWS_X86_64\ORA\UC\...)
Do i replace (a) with (b)?
For R3trans:
How do I update this file?
- Cobain.

Error while installing SAP IDES 4.7 2.00 SR1 on CentOS 4.5

Hi guys,
I am trying to install SAP IDES 4.7 2.00 on CentOS 4.5 box (RHEL 4 compatible). I already succeded installing central instance. I got stuck when proceed installing Oracle 9.2 on it.
I am using Oracle version from SAP website (I download it).
I got this error while running RUNINSTALLER.
=======================================================================
myrides:orakds 5> ./RUNINSTALLER
Working in /oracle/stage/920_32/Disk1/SAP ...
Oracle Home Name: KDS_920_32
Oracle Install Group: dba
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/KDS/920_32
==============================
Preparing response files. Please wait:
======================================
Working on /oracle/stage/920_32/Disk1/SAP/SVRCUSTOM.RSP
/oracle/stage/920_32/Disk1/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.5770: Done
Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/bin/java. Please wait...
myrides:orakds 6> Error occurred during initialization of VM
Unable to load native library: /oracle/stage/920_32/Disk1/stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
myrides:orakds 6>
=======================================================================
Pleas provide me any suggestion. Thank you for your help.
best regards,
ardhian

Check
171356 - SAP software on Linux: Essential information
for information, which packages you need on RedHat 4.0
Markus

Error while installing SAP IDES ECC6.0 on windows server 2003.

Hi gurus,
I am getting error in installing SAP IDES ECC 6.0. In import ABAP step i am not able to execute all 19 services only 1 services is getting fail that is related to sapview.So,can anyone suggest me that how to solve this error and complete installation.
Thanks in Advace,
nainesh patadia.

C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726222931
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223305
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223306
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100726223709
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100726223710
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20100811085903
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20100811085911

Error in installing SAP IDES server

ERROR 2009-11-26 15:57:10
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_3/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-11-26 15:57:10
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_3/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-11-26 15:57:10
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .
Dear All,
I got these error during the installation of SAP IDES server now how to rectify it so plz if anybody could help me out.
With regards
Vishal Chaturvedi

LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 26-NOV-2009 15:57:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\EXTPROC1ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=erp-srv)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
64-bit Windows Error: 1004: Unknown error
Listener failed to start. See the error message(s) above...
Dear all.
This is the message from lsnrctl.log so how to start the listener...............plz help me out
With regards
Vishal Chaturvedi

Deloying error in CE 7.2 SP05: com/sap/ide/dii05/util/api/diilog/Severity

Hello,
I've just upgraded my Developer Studio from 7.2 SP03 to 7.2 SP05. I've imported my old developments fine, but, when I try to deploy to the server, I'm getting this error message,
"an internal error occurred during: "Create new archive, deploy and run". com/sap/ide/dii05/util/api/diilog/Severity"
I've alredy tried reloading and rebuilding the whole project.
Anyone knows what is the problem? Any clues?
Thanks & Regards
SU

Hello Vijay,
Thanks for your reply. The SAP AS Java system is configured correctly but the problem continues.
I've created a new simple "Hello World" Web Dynpro project from scratch, and when I try to deploy it, I have the same error:
java.lang.NoClassDefFoundError: com/sap/ide/dii05/util/api/diilog/Severity
     at com.sap.ide.eclipse.sdm.threading.OptionalDiiLogImpl.diiLog(OptionalDiiLogImpl.java:28)
     at com.sap.ide.eclipse.sdm.threading.OptionalDiiLog.diiLog(OptionalDiiLog.java:32)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:190)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:177)
     at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:152)
     at com.sap.ide.webdynpro.archivebuilder.ActionDeployArchive$DeployJob.run(ActionDeployArchive.java:219)
     at com.sap.ide.webdynpro.archivebuilder.ActionDeployAndTestApplication$ArchiveDeployAndRunJob.run(ActionDeployAndTestApplication.java:93)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: java.lang.ClassNotFoundException: com.sap.ide.dii05.util.api.diilog.Severity
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java:483)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:399)
     at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:387)
     at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:87)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Regards
SU

Installing SAP IDES but getting Error whn tries to upload JCE Files

Hi Guys
I m Installing SAP IDES...with DB2 on server 2008.
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks

Hi All,
Im getting same error. any suggestions?
I have checked the DPS in regedit (the DPS folder exists with lots of keys in it), Im using DLINK Gigabit adapter, and also vmware+NOD32 Antivirus is installed on the Server. I tried after disabling the Antivirus but no chance. Help is required.
While im using Oracle 10.2.0.4, windows 2008 R2-64, and error here is:
WARNING 2010-08-25 15:58:13
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\DPS).
and
WARNING 2010-08-25 15:58:13
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.

Finally Posting it - SAP IDES 4.71 EE SRI -1 Error

Dear Experts,
I am an HR proffessional, since 11 days struggling till late nights for installing SAP IDES on WinServer 2003r2 Enterprise Edition SP2. I Googled alot found n-numbers of materials, formated the OS around 45 times. Infact I took this challenge by myself that I shall not seek any help but now requesting you here to help me around.
I am installing all windows compenents i.e certificates, IIS, DNA, active directory etc. Finally not sure whether making errors in those configurations. However I am not able to move forward in installing Central Instance . Till JAVA, ORALCE 9i , and all are successfully installing.
When I run setup.cmd, in SAPINST. NT, dos opens and stucks in giving the Password in SAP System administration, Its giving the error (go and change the password in to OS level)
Pl. guide me thru this. What error is going on.
Thanking you in anticipation.
Regards
Karan Adhikari

First of all let me thank you for the address.
Sir, I have set up a Domain Server (nortan) server, also installed the Active Directory components. Assigned the IP address in TCP/IC too.
Further, initially I gave me the error that " Local policy of the system do not give the Permission to interactlvely" however I cleared the by nt rights command.
Then I gave me the error of password complexity. However I was also cleared by gpupdate command. After this it accepts the 3 digits password by When I install the SAPINST. it gave me the error of Bad password.
I tried to edit the group policy by logging into my SAPADM(user ac) but it gives the red cross in the same.
I am looking for some tutorial which can guide me thru the initial set up of all this.
Thanks
Karan
Edited by: adhi123 on Jun 9, 2011 12:06 PM

Need a Help with instalation SAP IDES 2005 SR2

Hi All,
I'm trying to install SAP IDES 2005 SR2 on my notebook HP (2GB RAM, 120GB HDD, 700 HDD external, dual core procesor), Win Server 2003 Enterpise, Oracle 10g (patch 2), jave 1.4.2.13, I've downloaded all installation files DVDs from SAP Marketplace.
Everytime my installations stops on step 19 - Import ABAP, and I get message like this:
(DB) INFO: T76MGE_CGROUP~0 created #20081023222635
DbSl Trace: Error 604 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-604 occurred when executing SQL stmt (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "T76MGE_CKI" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "CHKL_ITEM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "TASK_FOR" VARCHAR2(12) DEFAULT ' ' NOT NULL , "START_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "POSS_DUR" VARCHAR2(12) DEFAULT '0000' NOT NULL , "PSDUR_T_UNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "NEC_IT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "IS_DOC" VARCHAR2(3) DEFAULT ' ' NOT NULL , "START_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "START_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "END_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "END_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "END_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20081023222635
and also:
TRACE: 2008-10-23 22:22:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2008-10-23 22:26:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2008-10-23 22:26:48
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2008-10-23 22:26:48
1 error(s) during processing of packages.
INFO: 2008-10-23 22:26:48
Import Monitor is stopped.
Could anyone help me with this issue, what I am doing wrong?
I'll appreciete any help, cause I'm going crazy this is may be the 5th time that my installation stops on this stage.
Thanks in advance

Hi Eric
These are values in init.ora:
#Transaction processing
#sort_area_size=524288
#Datawarehouse
sort_area_size=1048576
large_pool_size=1048576 #Transaction processing, Datawarehouse
db_cache_size=50331648 #Datawarehouse, Transaction processing
java_pool_size=67108864 #Datawarehouse, Transaction processing
db_block_buffers = 200 # INITIAL
db_block_buffers=100 #SMALL
db_block_buffers =550 # MEDIUM
db_block_buffers=3200 #LARGE
#shared_pool_size = 52428800 # INITIAL
shared_pool_size = 67108864 # datewarehouse, transaction processing
log_checkpoint_interval = 10000
How I have to chenge the values?
And in init<SID> values are:
unit of shared_pool_size: bytes
unit of db_block_buffers: number of cached blocks
unit of log_buffer: bytes
shared_pool_size = 160903987
10% of shared_pool_size
shared_pool_reserved_size = 16090398
log_buffer = 1048576
Please, let me know what are the correct values?
Thank you in advance

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
 Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
 Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
 Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
 Last error logged in SAP kernel
 Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
 2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
 follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
pls, award points

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Error while installing IDES server.

Dear all,
Error while installing IDES server.
ERROR 2003-05-16 21:31:54
MOS-01011 'E:/usr/sap/IDS/SCS01/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2003-05-16 21:31:54
FCO-00011 The step createService with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0|createService was executed with status ERROR .
Regards,
Madhu s
Edited by: madhus.frnds on Sep 27, 2009 11:24 AM

Hi,
Please post the sapint.log file.
Thanks,
Shambo

Error in SAP IDES

Similar Messages

Maybe you are looking for