Error in saving a theme file as it is a read-only file
I work in a large, networked company with lots of workstation security. I am not a local admin, and the software was installed for me by an admin. I am trying to change a default in the recording setup, but I get this error everytime I try to change it. Our tech support has gone through and made sure that the attributes in the whole Captivate directory are not read-only. I still get the error message. Ideas? Thanks!
If you have an issue using the Captivate software that you think is an issue with the software itself you should post in the Captivate forum.
http://forums.adobe.com/community/adobe_captivate?view=discussions
I recommend doublechecking the access status of the file(s) involved.
Similar Messages
-
Upload Center 2010 error when saving Powerpoint 2010 file to SharePoint 2013
I'm experiencing an issue when attempting to save a Powerpoint 2010 file to our SharePoint 2013 farm. If a user opens the file in Edit mode, when saving the file Upload Center 2010 complains the upload failed, and PowerPoint 2010 displays a message
"Upload Failed The server version of this file was updated by another author" and 2 buttons are displayed "Keep My Version" and "Keep Server Version". This is incorrect though, because I confirmed on the server end
the changes have been made. If a user keeps hitting save, sometimes it won't fail during the upload.
If a user opens a file in Read Only mode, then clicks on the Edit button in Powerpoint 2010 and saves the changes, they are then prompted by the error "Refresh Required This file needs to be refreshed with updates. Click Save to refresh
and retry uploading your changes." Once again this is incorrect, as the changes have already been made in SharePoint.
I've recreated this error on multiple workstations, have tried re-installing Upload Center 2010, and have tried complete repairs of Office 2010. The occur continues to persist. This only occurs with Powerpoint 2010 though, and none of the other
Office 2010 products. I feel this is a bug in Upload Center 2010 with SharePoint 2013, because when I save from PowerPoint 2010 through a WebDAV connection over file explorer, it saves fine without any issue.
Has anyone run into this problem before? Below are some screenshots of the errors.
Here's the error when opening in Edit mode:
Here's the error when opening in Read Only mode, and then clicking on Edit in PowerPoint:Did you try Library -> Advance settings
Opening Documents in the Browser
Specify whether browser-enabled documents should be opened in the client or browser by default when a user clicks on them. If the client application is unavailable, the document will
always be opened in the browser.
Open in client application -
In recent days my Pages 09 has decided not save files and make them 'read only'
Does anyone have any ideas on why this is so - any help would be appreciated.
Many thanks,
GerryIsn't it just after the 10.7.3 update ?
If it's that, download the free maintenance tool named Onyx
http://www.titanium.free.fr/download.php
and run it with these settings :
I'm accustomed to urge users to apply MAINTENANCE bu Onyx was updated yesterdays so it may be matching more closely the system features.
Yvan KOENIG (VALLAURIS, France) lundi 13 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
Error while saving a .PDF File to a mapped drive
The issue I am having is similar to the one found on this older post. http://forums.adobe.com/message/3066663#3066663
The issue is as follows. I have a small company about 15 users divided into a couple of departments with different networking access needs. They each have Adobe Acrobat version XI installed on a Windows 7 Platform. Each user has a set of mapped drives that correspond to their department. The Disk mappings are all directed to the main shared Network Attached Storage (NAS) device. At any time there can be a number of PDF files open and being worked in. The same PDF is usually not opened at the same time from two different locations.
The issue is that two users who do a large amount of the work, IE. Scanning documents and adding them to documents that have been previously created, are reporting the same issue. The issue is when they have the PDF document opened and they are adding new content. Once the new content is added they go to save the document and then receive the following error:
“The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder.”
In order to save the file the user has to use the save as function and then browse to the original file location to save the document with the changes that have been made.
Along with the above error we have noticed that Adobe Acrobat is renaming the file that has been changed to aae##### or aak##### or aan#####. The file name is changed causing the normal save function to not work correctly.
Is there a reason Acrobat would be doing this?
I am not using Microsoft SharePoint.My users started to experience this issue for files on network shares as well once Adobe Reader was updated to 11.0.10
It has to do with Protected Mode being turned on. I don't know if it was off by default & now it is on with the update but turning it off changes Adobe Reader's behavior back to what the users expect - a prompt warning you if you want to overwrite the existing file & then selecting Yes to overwrite.
To disable Protected Mode:
Start Adobe Reader
Edit - Preferences - Security (Enhanced)
Uncheck Enable Protected Mode at Startup
Close Preferences & Close Reader
Now open a file from a network share & you Adobe saves as it used to. -
Run time error while saving values in File (Tcode)
Hi,
I am using FM call function 'FILE_GET_NAME'
exporting
logical_filename = logical_filename
parameter_1 = program_name
parameter_2 = file_id_param
importing
file_name = physical_filename
exceptions
file_not_found = 1
others = 2.
for this I am trying to maintain dynamic values(field symbols) in Tcode FILE Logical file name definition , physical path as.
Physical file =<PARAM_1>.<PARAM_2>
But while saving it dumps, saying filed symbol assinment to substring is not allowed.
Physical path for the same is /<V=Z_DIR_MAIN>/<SYSID>/<V=Z_DIR_OUT>/<FILENAME>.<CLIENT>.<DATE><TIME>.
Regards
Mohinder Singh ChauhanHello Mohinder,
the better way to analyse these kind of things is by entering the function module in se37 and providing the required test data.
In your scenarion as you say its throwing a runtime dump related to field symbols better you concatenate the data param1 and param2 into a new variable and then pass that value into the function module.
Thanks,
M.Naveen kumar -
Error while saving the excel file
hai all,
i had an requirement to upload customer master data through lsmw while saving the data in excel file with extension as) text( tab delimeted)(.txt) it is not saving and displaying the message as " the selected file type doesnot support workbooks that contain multiple sheets. to save only the active sheet click ok."
regards,
karthikEnsure that you have not opened any excel file or text file with similar name.
thanks
G. Lakshmipathi -
Error when saving an .xlf File
HI,
I´m trying to internationalize my WebDynpro Project, so I do like in the Tutorial is said and change the .xlf files.
But when I want to save the changed files I get an error message.
Save failed: Cant´t find resource for bundle java.util.PropertyResourceBundle, key ymsg_SetCollection
Does somebody know why?
Thanks
UliHi Ulrike,
I would suggest that you upgrade to SP7 level. Infact now SP9 is available. In that version these problems have been solved.
Regards
Sidharth -
IAs 6.0 Deployoment error when saving a war file: different size?
Hi,
Ever got a an error message about different sizes( aka "expected n bytes,
got m")) when trying to save a war file in the iAS 6.0 GUI deployment tool?
Thanks,
MarianOnce I experienced the same thing when I replaced files in the package using
winzip.
Repack the content using jar and it should work.
Regards,
Gyorgy
Marian wrote:
Hi,
Ever got a an error message about different sizes( aka "expected n bytes,
got m")) when trying to save a war file in the iAS 6.0 GUI deployment tool?
Thanks,
Marian -
ERROR WHEN SAVING METADATA TO FILE
how do I fix this
tiffs are supported, but you probably have some incompatible metadata in your tiffs (assuming tiffs are not otherwise corrupt). Consider logging bug report and sending example of offending tiff to Adobe.
Were all those tiffs updated using a common application (other than Lightroom)?
Consider using exiftool to read/write metadata and see how that works. Assuming it is what I think it is (and not an unsupported camera problem or other legit incompatibility), you may even be able to fix the problem using exiftool, but definitely save problem files to support bug report to Adobe. -
Error in saving of 'Assign File' step in LSMW
Hi all,
I am preparing LSMW to load material master data for multiple sources, there are 4 flat files. In step 'Assign File', I created source structures as follows:.
1. Structure 1
2. Structure 2
below Structure 2, we have children root
2.1. Structure 2A
2.2. Structure 2B
but when I tried to save,it pops up with message : Using different sequential files is not allowed.
Whats the problem ?
thank you
ChikaHii,
I too faced the same situation,but i solved it.
In specify files select "Data for one source sturcture (Table)". -
CAD Integration - Error While Saving file
Hi,
Im having One Document type "DRW" which was working fine with all the functionalities.
After that i created another document type "PDW". Now all the functionalities are working fine for this Document type and not for "DRW".
Im getting an error while saving the drawing file in AutoCAD.
For DRW Type, I can able to create a DIR. After creating DIR if i click save button im getting this error.
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Updating document info record 0000000000000010000000458/DRW/000/00 ...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group : 104
Key : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Command:
Command: Conversion to JPG done.
Checkin file into the existing storage category ZMRK ...
E26 253 Error while checking in and storing:
C:\SapWorkDir\AcadM\ConvertTempPath\10000000458_DR
But there is no error in "PDW" document type.
Anybody have any idea on this?
Regards,
MRK.Hi MRK,
Check the Status in DC10.
Also make sure you have configured in dc30
If possible send me the config file (.cfg)* to [email protected]
I ll check n revert back...
Have you done any settings based on document type in CFG file?
Niranjan
Award points if useful...
Edited by: Niranjan Dandekar on Mar 7, 2008 1:42 PM -
I have 2 problems creating a .ps file.
As i know, there are 2 ways of creating a Postcript file from a PDF.
The first is from the Print monitor. I go through menu File/Page Setup i give the exact dimensions from my spreaded pages and after that i go to Print and when this window opens,
i go down and left and i open the pop-up menu on"PDF" and i choose "Save PDF as Postscript"
There is where i get the above error message :
"Saving a PDF file when printing is not supported. Instead, choose File > Save."
And the second scenario, i get an equal problem.
If i go to Page setup and give the right dimensions of my spreaded document, after that i go to the File/Save as command, there is choose from the bottom pop-up menu, the option at Format: Postscript
If i do that i get the following message:
"The document could not be saved. An internal error occured."
What is wrong with all this?
Can anyone help me out?
System preferences.
Mac OS X 10.4.11
Acrobat professional 8.1.2
Thank youJon Bessant asked:
"Does this occur on every PDF file? The internal error message that is ..."
Yes, it happens on every PDF -
Error raised when opening physical standby in read only
Hi,
I've a physical standby 11.2.0.2 created using RMAN duplicate from active database which is configured with data guard. When I open the database in READ ONLY mode
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
I get this error in the alert log
Physical standby database opened for read only access.
Fri Aug 12 15:14:01 2011
db_recovery_file_dest_size of 256000 MB is 4.72% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Errors in file /oradata/admin/ORAINT/diag/diag/rdbms/oraintsb/oraintsb/trace/ora intsb_ora_8692.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00931: missing identifier
ORA-06512: at "SYS.DBMS_UTILITY", line 156
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 72
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 84
ORA-06512: at "SYS.PROC_PKGS_KEEP", line 26
ORA-06512: at line 2
Completed: alter database open read only
the tracefile is showing this,
Trace file /oradata/admin/ORAINT/diag/diag/rdbms/oraintsb/oraintsb/trace/oraintsb_ora_8692.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /opt/oracle/product/11.2.0/ORAINT
System name: Linux
Node name: c4p-db01
Release: 2.6.18-194.0.0.0.3.el5xen
Version: #1 SMP Mon Mar 29 18:27:00 EDT 2010
Machine: x86_64
VM name: Xen Version: 3.4 (PVM)
Instance name: oraintsb
Redo thread mounted by this instance: 1
Oracle process number: 17
Unix process pid: 8692, image: oracle@c4p-db01 (TNS V1-V3)
*** 2011-08-12 15:14:03.367
*** SESSION ID:(24.1) 2011-08-12 15:14:03.367
*** CLIENT ID:() 2011-08-12 15:14:03.367
*** SERVICE NAME:(SYS$USERS) 2011-08-12 15:14:03.367
*** MODULE NAME:(sqlplus@c4p-db01 (TNS V1-V3)) 2011-08-12 15:14:03.367
*** ACTION NAME:() 2011-08-12 15:14:03.367
Error in executing triggers on database startup
*** 2011-08-12 15:14:03.367
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-00604: error occurred at recursive SQL level 1
ORA-00931: missing identifier
ORA-06512: at "SYS.DBMS_UTILITY", line 156
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 72
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 84
ORA-06512: at "SYS.PROC_PKGS_KEEP", line 26
ORA-06512: at line 2
if I disable the system triggers using
ALTER SYSTEM SET "_system_trig_enabled"=FALSE scope=both;
The error doesn't appear but when trying to switch to active dataguard the open_mode goes from READ ONLY to MOUNTED rather than READ ONLY WITH APPLY
Any help much appreciated
Edited by: phil74 on 12-Aug-2011 07:22Have you checked what your guard status is set to?
SQL> SELECT guard_status from v$database;I've had a similar issue before but with a standby, whereby the status was set to ALL. This means all users apart from SYS are unable to make changes on the database.
My resolution was to set the status to standby:
SQL> ALTER DATABASE GUARD STANDBY;You may wish to set the guard status to NONE however.
I took some notes:
http://juniororacledba.wordpress.com/2011/07/17/oracle-logical-standby-dataguard-error However, I do not have a link to any Oracle documentation on the subject to hand. But might give you a head start. -
Error - Failure inserting into the read-only column "Adj_ID".
I received the error messages while importing data from one DB to another.
Validating (Error)
Messages
Error 0xc0202049: Data Flow Task 1: Failure inserting into the read-only column "Adj_ID".
(SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task 1: Column metadata validation failed.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task 1: "component "Destination 2 - Adjustments" (271)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task 1: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task 1: There were errors during task validation.
(SQL Server Import and Export Wizard)>> Failure inserting into the
read-only column "Adj_ID".
The error message is very clear(inserting to readonly column). Are you inserting data to Identity or calculated column
Satheesh
My Blog
Maybe you are looking for
-
Does anyone know if the oracle odbc drivers support multi language character sets? I am trying to retrieve Chinese (prc) characters from the database (it is stored correctly and I have the Microsoft Multilanguage service pack installed). Odbc won't r
-
Purchase the order, sign out-in, still cannot make...
purchased this order (****************693) on April 27, tried to sing out and in several times on May 3. even changed the password, but still cannot make calls, land and mobile. any suggestions?
-
Constant autosave error in new keynote (6.0)
I just started using 6.0 after upgrading to Mavericks, with a new presentation. Every few minutes, an alert pops up to say that the document "...could not be autosaved. The file has been changed by another application. Click Save Anyway to keep your
-
Can anyone tell me where I can find information's on how I can install Oracle Workflow Server. Because I have the problem that when I start the Workflow Configuration Assistent I got the messeg "No Oracle 10g" Database installed. But I have a 10g ins
-
Error Installing Sneak Preview SP11 on Windows XP
Hi, I am getting the following errors while installing the NWDS Sneak Preview SP11 on Windows XP. ERROR 2006-02-10 12:23:37 FSL-06002 Error 1060 (The specified service does not exist as an installed service. ) in execution of a 'OpenService' functio