Error in saving a workbook
Hello,
While trying to save a workbook in Bex, I am getting the following message:
<b>"<internal error> workbook storage fault: 310".</b>
I have implemented the instruction in note 592918, but it did not solved the problem.
In other threads I have found a recommendation to uncheck "/SCET/GUI_UPLOAD" option in cluster VSCAN_PROFILE_VC in transaction SM34, but in our system this option was already unchecked.
Please advise.
Thanks in advance, Amir.
Pls help.
I too facing same problem
Regards,
Raj
Similar Messages
-
Critical Error while saving a workbook as local spreadsheet
Hello,
We have recently upgraded from BW 3.5 to BI 7.0 and users are intermittently experiencing problems when trying to save a BI workbook as a local spreadsheet file. Sometimes when they try several times eventually they are able to save it other times they are unable to. It does not seem to be memory related or related to the size of the data from the queries in the workbook.
The message they receive is: A critical program error has occured. The program will now terminate. Please refer to the trace for furthur information.
Any help would be appreciated.
Thank you.Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error while Saving Workbook in BEx
Hi Experts,
When ever I am trying to same a workbook, I get the following error:
"workbook format .xlsm is not supported by the server"
Does anyone of you faced this error earlier ? Please suggest. I am working on SAP Netweaver 2007 and have MS Office 2007 installed in my system..
Best Regards,
RishiHi,
Please let me know if you are opening the workbook in 3.5 Analyser. If
then unfortunately Business explorer Analyzer 3.x is not supporting the
new file-format. Please refer to note 1052761. If you would like to use
new office 2007 file format you need to use Bex Analyzer 7.0. Due to
the architecture of Analyzer 3.x this behaviour cannot be changed.
BW Support Package lower than SP16 it is not
possible to save files in Excel 2007 file formats on the server. But you
can still save files from Excel 2007. When using the SAP Default
Workbook please set the flag "Use XLS file format" as defined in note
1267924. If you create workbooks from scratch ensure that Excel creates
new files in XLS format (in the Excel options).
Afterwards you are able to save files with Excel 2007 in XLS file
format. The new Excel 2007 file formats require the implementation of
the latest BW Support Package.
If you are interested in saving workbooks in xlsm format you have to
use at least SP16 and a recent FEP (e.g. FEP801). But it is
not correct that it will work also when you implement the notes on a SP
level which is older then SP15, as then other corrections are missing.
And these points, I am afraid, cannot be downported to a Support package
less than SP15.
Therefore I have to ask you to import furhter SPs. Then I am pretty sure
that it will work.
Please check also note 1055581 ... where you find the info that
we recommend to use at least SPS15 (which is BW-SP17).
Thanks,
Venkat
So as mentioned above you can still save files from Excel 2007. When
using the SAP Default Workbook please set the flag "Use XLS file format"
as defined in note 1267924. For saving the workbook in the new file
format(xlsm) you need atleast SP16. The latest Sp being SP20, I suggest
you to look for an upgrade. -
Error while saving workbook or query
Hi guys. After upgrade to 7.0 we are experiencing error while saving workbook or query.
We are using BEx 3.5.
Here is the error:
"Program error in class SAPMSSY1 method: UNCAUGHT_EXEPTION.
An exeption with the type CX_SY_PROGRAM_NOT_FOUND occured, but was neighter handled locally, nor declared in a RAISING clause.
Program CP9QUC052Y8TXQ0C2TM5KB0T92K does not exist"
What can be the cause of this error?Hi Jose!
It was easy.
The problem can be solved by reactivating the personalization
for the BEx.
To reactivate the personilization go to transaction SPRO and navigate:
SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP
NetWeaver -> Business Intelligence -> Settings for Reporting and
Analysis -> General Settings for Reportiung and Analysis
or
open the transaction RS_PERS_ACTIVATE
Check all boxes and execute.
Hope it helps.
Vad. -
Dear All,
We are getting following error while saving workbook. This has started after our migration from IBM server to HP Unix server.
"Document store access caused errors in the SAP Correction System"
Thanks in advance.
Regards: GauraveHi,
During the save of the workbook a transport check is done and that check fails. The reason for that is "Client independent objects not changeable in this client" Or "System is not set to changeable - objects are not changeable" The solution to the problem is "Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4."
Note 992965 is relevant here.
- RSA1 -> transport connection ->object changeability -> check the object type:XLWB(workbook)
If the setting is 'Not Changeable', please change it to 'Everything Changeable' by right mouse click.
Rgds
Manoj Kumar -
Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- AshishHi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error while transporting a Workbook
Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.RHi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat -
Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written. -
Error while saving the Sales Order
Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian -
Error while saving FYV : Gaps in financial year variant periods
Hello Experts,
We are getting an error while saving a new FYV as:
Gaps in financial year variant periods XY
Message no. FGV556
Diagnosis
The period specification has gaps. The periods must be sequentially numbered without any gaps.
System Response
Only a correctly defined period assignment can be saved.
Procedure
Define the periods with consecutive numbers.
Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
Month-Day-Period-Yearshift
11 --- 7 --- 1 --- +1
11 --- 14 --- 2 --- +1
11 --- 21 --- 3 --- +1
11 --- 28 --- 4 --- +1
12 --- 5 --- 5 --- +1
12 --- 12 --- 6 --- +1
12 --- 19 --- 7 --- +1
12 --- 26 --- 8 --- +1
12 --- 31 --- 9 --- +1
1 --- 3 --- 9 --- 0
1 --- 10 --- 10 --- 0
1 --- 17 --- 11 --- 0
1 --- 24 --- 12 --- 0
1 --- 31 --- 13 --- 0
2 --- 7 --- 14 --- 0
2 --- 14 --- 15 --- 0
2 --- 21 --- 16 --- 0
2 --- 28 --- 17 --- 0
3 --- 7 --- 18 --- 0
3 --- 14 --- 19 --- 0
3 --- 21 --- 20 --- 0
3 --- 28 --- 21 --- 0
4 --- 4 --- 22 --- 0
4 --- 11 --- 23 --- 0
4 --- 18 --- 24 --- 0
4 --- 25 --- 25 --- 0
4 --- 2 --- 26 --- 0
5 --- 9 --- 27 --- 0
5 --- 16 --- 28 --- 0
5 --- 23 --- 29 --- 0
5 --- 30 --- 30 --- 0
6 --- 6 --- 31 --- 0
6 --- 13 --- 32 --- 0
6 --- 20 --- 33 --- 0
6 --- 27 --- 34 --- 0
7 --- 4 --- 35 --- 0
7 --- 11 --- 36 --- 0
7 --- 18 --- 37 --- 0
7 --- 25 --- 38 --- 0
8 --- 1 --- 39 --- 0
8 --- 8 --- 40 --- 0
8 --- 15 --- 41 --- 0
8 --- 22 --- 42 --- 0
8 --- 29 --- 43 --- 0
9 --- 5 --- 44 --- 0
9 --- 12 --- 45 --- 0
9 --- 19 --- 46 --- 0
9 --- 26 --- 47 --- 0
10 --- 3 --- 48 --- 0
10 --- 10 --- 49 --- 0
10 --- 17 --- 50 --- 0
10 --- 24 --- 51 --- 0
10 --- 31 --- 52 --- 0
The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009 is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
Please help!
SusanHello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year - 2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
Month
Day
Period
Year Shift
1
7
1
0
1
14
2
0
1
21
3
0
1
28
4
0
2
4
5
0
2
11
6
0
2
18
7
0
2
25
8
0
3
4
9
0
3
11
10
0
3
18
11
0
3
25
12
0
4
1
13
0
4
8
14
0
4
15
15
0
4
22
16
0
4
29
17
0
5
6
18
0
5
13
19
0
5
20
20
0
5
27
21
0
6
3
22
0
6
10
23
0
6
17
24
0
6
24
25
0
7
1
26
0
7
8
27
0
7
15
28
0
7
22
29
0
7
29
30
0
8
5
31
0
8
12
32
0
8
19
33
0
8
26
34
0
9
2
35
0
9
9
36
0
9
16
37
0
9
23
38
0
9
30
39
0
10
7
40
0
10
14
41
0
10
21
42
0
10
28
43
0
11
4
44
0
11
11
45
0
11
18
46
0
11
25
47
0
12
2
48
0
12
9
49
0
12
16
50
0
12
23
51
0
12
30
52
0
12
31
1
+1
Thanks
Deepankar -
Error while saving project in cProjects
Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LR_CALC").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey -
Error While Saving Mapping For A Dimension
I am getting The Error While Saving The mapping For a Dimension
Any Clue?
An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
not exist.
Thanks
RaghuCheck the OSS note 550760 regarding the issue.
-
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
Error while saving Excise Invoice
Hi,
I am getting an error while saving an excise invoice. It is as follows :
BED : Debit = 1,400.00 Credit = 392.00 Diff =1,008.00
Message no. 8I312
please help....
Thanks & Regards,
S.RajeswariHi,
I am getting the following error while saving the Excise invoice.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following
details:
Exchange rate '00', amount ' 28.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling
application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Thanks & Regards,
Ramya -
Error while saving date value in Java dictionary
Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
BhavikHi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: <b>target_date</b>
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
int l_year;
int l_month;
int l_days;
l_year = target_Date.getYear();
l_month = target_Date.getMonth();
l_days = target_Date.getDate();
Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik
Maybe you are looking for
-
Panic report, need help diagnosing
Hello all, I have a mid 2007 iMac that is randomly crashing. Started locking up about a week ago and now I am getting the following kernel panic report. Need some help troubleshooting if possible: Anonymous UUID: 2FE323A8-17EC-CDE3-8419-BE69D9
-
Cpm. Flash player. Com pop up
How do I get rid of a cpm.flashplayertrack.com pop up asking me to upgrade my flash player version. It won't let me do anything else in Safari.
-
Regarding obselete function modules
What are replacements for these funciton modules its urgent please reply POPUP_TO_CONFIRM_WITH_MESSAGE, LOG_SYSTEM_GET_RFC_DESTINATION, HELPSCREEN_NA_CREATE
-
Configuring variables for bsp_protcl :// bsp_server /
Hello all, We have copied our BW and SRM production systems back to our support environment (BW1 and EB1). There is a BW web reporting role that is on both the BW1 and EB1 system however when I execute a report from the role on the EB1 system it trie
-
HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade
what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update? what registry changes does it make, if any?