Error in saving the file

Hi,
I have created one report in apex. I have dowload option to download the csv file from report.. i am able to download to download all files accept one report which is giving me the error while clicking on saving the file "Error: Unable to read source file or disk"...Please suggest why it is happening. Thanks in advance.

Have you tried Save As…
Where are you trying to save it to?
Are you using iCloud?
Peter
btw Your tag is out of date.

Similar Messages

Error while saving the file path

I have come across a problem in LSMW.
In specify files step when I was trying to give the filename either in Presentation server or Application server and then save ,I am getting an error called 'No Logical Path has been specified'. In debugging I can see p_log_path and p_log_file are initial where as p_phys_file_compl has the file which is created automatically with standard naming convention. These 3 fields represents Converted Data files. I think the problem is with settings since the error is not happening to other users. If we double click 'Converted Data' I can see Logical Path and Logical File fields. If I give the same file that is used for converted data it is asking me to create and if we agree then it creates and then we are able to save. So I think there is some setting changes or some other thing happened which at this stage I couldn't find out because I have not changed any settings. So can you please let me know if u have come across the same problem or if u know the solution.

In the <b>specify files path</b> have u specified the paths correctly.
5 Legacy data          On the PC (frontend)
VASG3 INPUT FILE               Y:VHDEV TEST FILE unlinked genl1.txt
                                        Data for one source structure (table)
                                        Delimiter tabulator
Order of fields as in source structure definition
                                        With end of record sequence (text file)
                                        Codepage ASCII
Legacy data          On the R/3 server (application server)
5 Read Data            File for read data (application server)
5 Read Data                      /int/T82/conv/VNH_ASGN3.lsmw.read
A82      /int/A82/conv/VNH_ASGN3.lsmw.read
             P82      /int/P82/conv/VNH_ASGN3.lsmw.read
             T82      /int/T82/conv/VNH_ASGN3.lsmw.read
5 Converted Data       File for converted data (application server)
5 ConvertedData                 /int/T82/conv/VNH_ASGN3.lsmw.conv
A82      /int/A82/conv/VNH_ASGN3.lsmw.conv
             P82      /int/P82/conv/VNH_ASGN3.lsmw.conv
             T82      /int/T82/conv/VNH_ASGN3.lsmw.conv
Values for wildcard Values for wildcard '*' in file names
Refer teh above u ahve to specifythe path till PROD system.
I too faced the saem problem.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

HP scanning error: "An error has occurred saving the file because it could not be written to..

HP scanning error: “An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem. Some claim that this is caused by an upgrade of Apple OS10 (which I did do). One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing. I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.

Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software. So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade. How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system . WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions, I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank you

This worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

"An error has occurred saving the file because it could not be written to. Check ..."

I have the familiar Mavericks issue of failing to save scanned files from my Mac:
"An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only."
As far as I can see, there has been no resolution to this issue, despite reassurances dating to last fall (2013).
The support website acts funky, too, sending me around in circles when I try to download the drivers; it may be a Safari-only problem, but still, please fix your software!

Hi,
What is your printer model? what Mac OS X version?
Have you tried scanning with Image Capture or Preview?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

An error has occurred saving the file because it could not be written to.

An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
This error message comes up every time I try to save a scanned document to my mac 10.9 .4 . I have reset the software for my HP C5180.All in one. I have not had te problem before, just recently following some upgrades ....any suggestions how to fix this, on reading forums it seems its a common problem.. not good .
Thanks

Hi @annie59,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Photosmart c5180 on Mac 10.9.4. I am happy to help you with this scanning issue!
Please try the following:
Reset the printing system. OS X Mavericks: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
See this installation guide. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
See this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. "

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

An error occurred saving the images to the chosen file location

I am trying to save the scans from my HP Officejet 6500. I receive the following error message:
An error occurred saving the images to the chosen file location.
I have Win 7.
I can scan and save if I choose to use the picture option but I can't use the feeder with the picture option. It is only good if I have 1 page.

I received this exact same message:
an error occurred saving the images to the chosen file location.
8,[(8,106,0)]
I have not had the time to verify this, but I suspect the security settings on any other location you specify are not the same as those of the default. i.e. C:\Users\%Username%\Documents\My Scans
When I used the default location and base name the software provided, it worked.
My guess is Microsoft and/or HP may have changed the security permissions for something in the path folders and the Scanning Software is therefore not permitted to write into the location you entered.

CONVERT_OTF error while opening the file in acrobat professional.

Hi Gurus,
I'm using 'CONVERT_OTF' to convert smartform to PDF and then I'm saving the file to application server (Code shown below). ADOBE Acrobat Viewer can handle this error when you open the PDF file - you don't get an error message.
Adobe Acrobat Professional can also open the corrupted file but you'll get the following message if you close it:
'Do you want to save changes to file before closing?'
Kindly help me why some files can be processed successfully and some files gets corrupted.
call function 'CONVERT_OTF'
    exporting
      format                = 'PDF'
      max_linewidth         = 132
    importing
      bin_filesize          = v_len_in
     BIN_FILE              = LD_BINFILE
    tables
      otf                   = i_otf
      lines                 = i_tline
    exceptions
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      others                = 4.
if sy-subrc <> 0.
    perform protocol_update.
endif.
loop at i_tline.
    translate i_tline using '~'.
    concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
    i_objbin = wa_buffer.
    append i_objbin.
    shift wa_buffer left by 255 places.
    if wa_buffer is initial.
      exit.
    endif.
enddo.
open dataset v_unix for output in binary mode
    message v_message.
    if sy-subrc ne 0.
      message 'Could not open file for saving' type 'E'.
    endif.
    loop at i_objbin.
      transfer i_objbin to v_unix.
    endloop.
    close dataset v_unix.

Hi
Try to use binary data:
CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT                = 'PDF'
      IMPORTING
        BIN_FILESIZE          = BIN_FILESIZE
        BIN_FILE              = BIN_FILE
      TABLES
        OTF                   = OTFDATA
        LINES                 = T_LINES
      EXCEPTIONS
        ERR_MAX_LINEWIDTH     = 1
        ERR_FORMAT            = 2
        ERR_CONV_NOT_POSSIBLE = 3
        ERR_BAD_OTF           = 4
        OTHERS                = 5.
PDF_CONTENT = CL_DOCUMENT_BCS=>XSTRING_TO_SOLIX( BIN_FILE ).
    OPEN DATASET FILE_NAME FOR OUTPUT IN BINARY MODE.
    IF SY-SUBRC <> 0.
    ENDIF.
    LOOP AT PDF_CONTENT INTO L_PDF.
      TRANSFER L_PDF TO FILE_NAME.
    ENDLOOP.
    CLOSE DATASET FILE_NAME.
Max

Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation.

I am getting Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation when deploying from msi package. .
Need help to resolve the issue

Hi dingusmagii
Can you please share the following info:
-> Which OS and architecture are you on
-> What are the exact steps being followed for installation.
-> Do you have any previous version of Reader already installed on your machine.
Also it would be helpful if you can you share Windows Installer log. Please follow the steps below to create installer log
1. Launch Notepad
2. Copy paste the following text in notepad
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"
3. Now press Ctrl+S to save the file.
4. In the "Filename" field type <any_file_name>.reg for e.g. abc.reg
4. In the "Save as type" dropdown, select "All Files"
5. Click Save button to save the file at desired location
6. Go to the location where you saved the file and double click on it.
7. Follow the prompts to create the registry key.
After the registry key is added successfully, please re run the 11.0.07 patch installer. Once you get the error message click ok and then click on finish to close the installer dialog.
Now go to C:\Users\{username}\AppData\Local\Temp and look for file with name similar to MSIxxxxx.log.
Please upload the dump (compress the dump using WinZip or likewise) and share the link here.
For help see link How to share a document
regards,
Rohit

Error when saving audio file

I am having an issue when trying to save an audio file. Looking for some help on what might be causing the problem. With the audio file highlighted, I select Save As and title the file. When I hit OK, this error comes up..The file is in use by another application and cannot be overwritten. I am saving the file name as something new so it is not trying to overwrite a file with the same name. Also there is not another Audition opened in the background or any other programs that could cause "another application" error. Thanks for your help.

Thank you for the reply. Here is what I determined. Sorry I couldn't answer all your questions. I'm don't know everything about computers and networks, just enough to be dangerous.
File length doesn't make a difference (try save a file of only a few samples) I tried record length of a few seconds to five minutes and it happens on all different file lengths.
You have not had this issue with Adobe Audition 2.0 and Cool Edit Professional 2000, it has never worked in Audition CS5.5 We have one computer that has Audition 2.0 and have no problems with that. Previously used CoolEdit and no problems with that either.
You can save the file to the local workstation drive and then copy it using Windows Explorer to the network share with no issues. Saving to the local computers hard drive works everytime and then I am able to copy that file to the desired network drive.
You are using Windows Storage Server 2003 in a Raid 10 array for your storage server. Sorry do not know
Active Directory and the workstations have the proper permissions to read and write to the network shares. Yes
The workstations running Adobe Audition CS5.5 are running Windows 7 Profession 32bit and have Active Directory Login. Yes. They are Windows 7 32 bit. Not sure about Active Directory Login
You are able to save to the local drive and copy the file to the same network share via Windows Explorer. Yes
Toggling the saving of Metadata and Markers doesn't make a difference. Sorry do not know
You are able to save as other formats (try AIFF, MP3, and a SESX session). Able to save MP3's to the notwork drive. only .wav are having issues
Running Audition as Administrator makes no difference. No difference
Running Audition in XP compatibility mode makes no difference. Tried that and still had same issues
Turning off the writing of .pkf files doesn't make a difference. Sorry not sure how to do that
I hope this helps and I apologize for not being able to answer all your questions.
Best regards

Error in saving the file

Similar Messages

Maybe you are looking for