Error in SBO DTW

hi,
while trying to upload a csv file to SBO using DTW , the following error occurs. I have changed the data according to specified data type but still the error comes as following,
<ErrorMessage>12345 Invalid Code [OHEM.bankCode]Application-defined or object-defined error</ErrorMessage>
In the table bankcode is defined as nvarchar & size is 30. I tried with both alphanumeric & integer. but still the error comes. please help!!
Thanks in advance,
Jona

Jona,
Specifically what object are you trying to import with the DTW?
Eddy

Similar Messages

Error while running DTW in SAP Business One 9.0

Dear All,
Error while running DTW the error shows that in SAP Business One 9.0 & PL 08 the 'Unable to access SBO-Common Database' & attached the screen shot for the same.
Kindly guide for the same
Thanks&Regards
Umesh Vaidya

Hi Umesh...
check with these links
http://scn.sap.com/thread/3164843\
-111 Cannot access sbo-common database
Unable to access SBO-Common database
865191- DTW Troubleshooting Guide
Hope Helpful
Regards
Kennedy

Error during SBO User authentication

Hello,
When I open a DTW and try to log on to any of my database then i get this error message "Error during SBO authentication"
Can somebody help me out?

Hi Bright,
Please check SAP Version and DTW Version is same or not.
If not same then please try to remove DTW and install Same Version of DTW as SAP B1.
Hope this helps
Regards::::
Atul Chakraborty

Capturing errors from sbo

When I get an error in SBO, it usually prints an error message on the bottom of the interface, on red background specifying the error code, message, table sometimes. I would like to find a list of all the errors with their details: error code, message, table, columns, description, why did it appear, how to solve it. And is there a way I could capture all the errors that appear?
Thank you,
Irina

Hey Irina.
If you look in the help files for the DI API and search for error codes there is a listing of all the error codes and a description of the error. I don't think you will find a lot of detail on why it appeared or how to solve the error message.
Each DI operation that you complete gives a return code integer. If this is a negative number that means the action failed and then you use the GetLastError Method to retrieve the detailed error information.

Error message in DTW when choosing any document business object

Hi,
We have an issue uploading AR Invoices, Credit Notes etc. with DTW.
We have installed DI-APIs and DTW on a server, which does not have SBO installed. DI-API was installed by copying and running the installation files from a server with SBO 2005 (680320) installed. This is the same server that we are connecting to in DTW. DTW was also installed by copying the setup.exe file for SBO2005 SP01 from another place.
All business objects work fine (Chart of Accounts, Business Partners, Items etc.) except for all document objects (Credit notes, Invoices etc.). The following error message is received:
"Runtime error!
C:\program files\SAP\Data Transfer Workbench\DTW.exe
abnormal program termination"
We also tried with another data migration program called xFusion Studio. But also here documents upload generates an error message:
"An exception was thrown by target of an invocation"
Do you know if this is due to a problem with the DI-APIs?
Could the problem be related to the fact that SBO is not installed on the server? Anything else?
Very thankful for help.
Tobias.
Edited by: External Consultant on Feb 8, 2008 12:04 AM

If the issue was due to SBO not installed on Server then none of the templates should have worked. But you seem to have COA and BP working.
How sure are you that your templates are fine.
If possible could you comment here about the columns of your template that have data.
Suda

Message Error in SBO 2005A

Dear all,
What are the meaning of messages below:
1. This entry already exists in the following tables 'A/R Invoice' (OINV) (ODBC-2035) [Message 131-183]
2. [Delivery-Rows-Warehouse Code][line:0],'This entry already exists in the following tables'Whse Journal' (OINM) (ODBC-2035)' [Message 131-183]
How to solve 2 error messages, I used SBO 2005 A SP 01PL 43 ?
Please help me about this ...
Regards,
Agung

Hi Agung,
Please check these threads:
Re: Sales Quotation Error : Entry already exists
This entry already exists in ODPS table
For these kinds of error, you may have to log to SAP support ASAP.
Thanks,
Gordon

Error encountered in DTW

Hi All,
I'm trying to do DTW and i encuntered this error message "Sort Error-after map, please check the prepared data and delimeter".
The steps are the following:
1. Select the data source in .txt format for OCRD, CRD1 and OCPR
2. Map Object fields and the source and target data are the same.
3. I've tried all error handling,
4. When i start importing data, the error above will come out.
Best Regards,
Melvin

Hi Melvin.......
This problem is solved in version 9 - PL8, I suggest that you install this update.
Regards,
Karina

Error con el DTW en SQL Server 2008

Buenas tardes...
Bueno, la cuestion es la siguiente, estoy intentando de realizar una subida de plantillas por el DTW, a SAP 2007 SP 01 PL 10 pero cada vez que le doy a "run simulation" o a "importar" simplemente se pone la pantalla del DTW mas clara, y aparece un mensaje diciendo: "Este problema tuvo un problema y debe cerrarse" si así mismo, este problema tuvo un problema...
Bueno. la cuestion es que aparece solo 1 boton que al precionarlo cierra el DTW por completo.
Ya realicé la desinstalación y reinstalación, actualizando el DIAPI, reiniciando el servidor y demas pero nada. Lo unico que encuentro es en el visor de sucesos de Windows server este mensaje:
"Aplicación con errores DTW.exe, versión 2005.0.0.30, marca de hora 0x4b4f7ce3, módulo con errores kernel32.dll, versión 6.0.6002.18005, marca de tiempo 0x49e037dd, código de excepción 0xe06d7363, desplazamiento con errores 0x0003fbae, Id. de proceso 0x430, hora de inicio de la aplicación 0x01cb958542dd4f84."
Me preocupa mas que todo la parte que informa problemas con el DDL de Kernel32.dll si esto es así podría ser directamente un problema de incompatibilidad con Windows server 2008 pero quería primero comprobar con las personas del foro para ver si han trabajado con esta herramienta o conocen alguna solución.

Hola nuevamente...
Si, ya habia verificado eso, inclusive llegue a desinstalarlo y asegurarme de instalarlo del actualizador de la versión en la que se encuentra el sistema.
Sin embargo ya logre medio solucionar el fin de semana en mi casa, Resulta ser que hice una exportación de la tabla de articulos desde SQL a Excel. Luego tome los datos de esa hoja, y los organice en la plantilla correspondiente, cambiandole a todos los articulos en la descripción, poniendoles un punto al final (todo esto en una BD de pruebas local).
La plantilla subió y no hubo inconvenientes, por lo que el motivo del error debe de ser algún dato en la plantilla original que me dieron.
Ahora tengo es otro inconveniente, Resulta ser que queremos hacer una carga nuevamente de los articulos, pero con los codigos cambiados ligeramente.
Por ejemplo, el articulo originalmente era con el codigo "A-01" pero la consultora funcional que subio los articulos en el cliente los subio con "A_01" es decir a todos los articulos les puso un guion bajo, y claro esta el cliente se molesto y no lo quiere de esa manera.
Lo que se va a hacer ahora es subir nuevamente la plantilla pero con los codigos de manera correcta, se le hara salida de inventario a los articulos con los codigos erroneos, y se bloquearan. Los filtros de busquedas se configurarán que no traigan los articulos que esten bloqueados.
Pero he aqui el inconveniente y que estoy montando ahorita el caso en SAP, Cuando intento de subir estos articulos con el codigo de manera correcta, (es decir con los "-" correctamente), el sistema me dice que no puede subir los articulos porque los mismos "Ya existen en el sistema".
Al buscarlo en SAP en el maestro de articulos me dice que no existe el mismo, y si busco crearlos manualmente (no por el DTW) tambien me da error de que el articulo ya existe.
Me puse a revisar las tablas por el generador de consultas, y encontre que en la tabla de almacenes y la de lista de precios ¡Si existen estos codigos!...
Lo que no logro comprender es porque si los mismos no pueden subir, y nunca llegaron a subir con el "-" en la base de datos, porque existen en estas 2 tablas, pero no existen en la tabla principal de Articulos.
Gracias por la respuesta.

Error in Editing DTW Templates

Hi Folks,
Good Day!
I have observed that i got errors once I edit DTW templates in MS Excel in remote of our client. The error was
'Can not find this object in B1 Application-defined or object defined error65171'.
At first, I edit those templates on my local PC and then transferred it and upload and it's ok. But when I edit those templates by remote connection, this error prompts me even though my template was correct and valid. I just want to know if there are certain restrictions or any cause why I encounter that error. Thank you.
Regards,
Fringe

Hi Rahul,
Yes, I'm connected remotely to the server.
Regards,
Fringe

Inventory Revaluation - Price Change (Error (-5002) in DTW)

Hi All ,
I want to do the Inventory Revaluation of FIFO Item through DTW.
There are set of three Template (OMRV - Doc Header , MRV1 - Doc Lines , MRV2 - FIFO Layers)
Here comes a error : Internal Error (-5002) occurred Application defined or Object Defined error65171
Please suggest !
Thanks
Ashish

Hi Ashish.......
Please check the Format Cell of the Price Column and it should be Text.
Most of the time the problem because of Format Cell........
Regards,
Rahul

Error while starting DTW

Hi All,
I am using SAP b one 8.8 SP: 00 PL 16
To migrate balance i am using DTW but when i click on the logo following eror is diplayed
ERROR:
"DI API'S dll file not found DTW will not start. Install DI API and restart application"
I have installed SAP from the setup file
PLease provide immediate solution since i am not able to upload balance.

Hi,
Mu upgrade wizrd shows the following version details for DTW and DI API under client components:
DI API .........................880234 SP:00 PL:16
DTW............................880234 SP:00 PL:16
PLease help wht to do now since i am runing out of time
Solutions will be higlhy aprecaited

RDR1.GrossBuyPr 'Field cannot be updated' error : Sales Order DTW update

Hi all.
This is my first post, so please be gentle :-).
I am attempting to update the unit prices on a bunch of Sales Orders via DTW.
Some items update successfully, but some do not, failing with the error :
RDR1.GrossBuyPr line: x, 'Field cannot be updated (ODBC -1029)'Application-defined or object-defined erroroOrders
I am not attempting to modify this column, although I am guessing that this is calculated by Business One internally.
I am using 2 tab-delimited files :
Documents.txt, which contains the RecordKey & DocEntry columns.
Documents_Lines.txt, which at the moment contains RecordKey, LineNum, UnitPrice & ItemCode.
I have tried it with the UnitPrice column renamed to Price, and with and without the ItemCode column present, and they give exactly the same error.
If I remove the price column completely, then it works (but nothing has updated, obviously).
I have searched the forums, the only thing I can see that comes close is the UnitPrice / Price renaming.
Or am I going about this the wrong way? The prices that I want to import already exist as a price list, and we can manually change these in Business One by going Form Settings -> Price List when in a Sales Order, but I am unsure how to do this via DTW. There are approx 3000 items that need changing, so doing it manually is not really an option.
Grateful for any and all help.
Thanks,

Here you go....
Documents.txt :
RecordKey     DocEntry
RecordKey     DocEntry
0     18664
1     19397
2     19578
3     20804
4     20808
5     20884
6     21114
7     21801
8     22222
9     22390
10     22455
11     22513
12     22889
Document_Lines.txt :
RecordKey     LineNum     UnitPrice
RecordKey     LineNum     UnitPrice
0     0     22.000000
1     2     49.000000
2     0     0
3     0     109.000000
3     1     115.000000
3     2     98.000000
3     3     104.000000
3     4     159.000000
3     5     32.000000
3     6     41.000000
3     7     82.000000
4     0     131.000000
5     0     207.000000
6     4     49.000000
7     0     87.511900
8     0     72.000000
9     1     306.000000
10     5     0.000000
11     0     58.000000
12     4     1.000000

SBO - DTW import file

Hi gurus,
I've to import in my SBO a file that contains:
- customer invoice;
- advance customer invoice.
I've found DTW that solve the first case; for the second DTW doesn't work.
Can someone help me?
Thanks,
Marco

Hi,
what do you mean by "advance customer invoice" ?
Invoices normally could be imported by using DTW template in the DTW folder (C:\Program Files\SAP\DTW\Templates....)
Regards

Error Connection SBO 2007A PL 49 using Citrix MPX Version 4

Dear All,
I have some problem connection. We use Citrix for connection to SBO 2007A PL 49. When we through Citrix Connection, the SBO Menu appears then show error message:Application has problem. Diagnostic file C:\Program FIles\SAP\SAP BUsiness One\Log\SAP Business One_20090907170137.dmp was created.
We use Citrix MPX Version 4 and Windows Server 2000.
Please give me the solution ASAP. Because, the user can not do the transaction because of this.
Thank you for your kind attention.
Regards,
Fitri

Hi Fitri,
There are various reasons why the error happened.
You should create a support message to SAP and attach these 2 files:
1. SAP Business One YYYY MM DD HH MM SS.DMP.
2. SAP Business One YYYY MM DD HH MM SS_dyagnostic.TXT.
from the :Program Files\SAP\SAP Business One\Log
Regards,
David

Error in SBO Service Manager

Dear All,.
I have a problem in SBO Service Manager. When I'm opening the Service Manager, the service seem not installed (blank) but when I'm looking in the Windows Server --> Administrative Tools --> Service, all the item in service manager is already installed and running.
I'm already trying to remove SAP Server and Server Tools and then doing clean installation but the problem is not solved. I'm already tried to reinstall Microsoft SQL Server 2005 but still the problem is not solved.
I'm using SAP Business One 2007A Pl 49 and Windows Server 2003 Standard Edition.
Pls help me to solve this problem...
Thanks for your help

Dear Gordon,
The Server OS is Microsoft Windows Server 2003 R2 standard Edition Service Pack 1
By the way, congratulation for your achievement...That's very fantastic that you already achieve more than 35.000 point...I'am also thank you for the answer that you give.. It's really help me a lot...
Thanks again

Error in SBO DTW

Similar Messages

Maybe you are looking for