Error in scenario HTTP - XI - RFC SYN

In the monitor this registering the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: No response available.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
So that this can happen
Thank's

Hi,
1. Look into the Receiver RFC adapter and check its status.
2. Check the RFC request Message. Is it valid? Try to execute the RFC with the same data and check if it works fine.
Also refer into this blog and cross check the steps,
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Regards
Bhavesh

Similar Messages

Problem in the scenario SOAP to RFC Syn

Hello All,
i developed one scenario for our client and development is same like below link.
http://www.riyaz.net/blog/xipi-consuming-xi-web-services-using-web-dynpro-part-i/technology/sap/6/
when i test the interface iam getting below error, Please tell me do i need to install any patch in Xi server or do i need to implement any note.
My SAP XI server version 3.0 and Service pack:19
2010-07-19 07:24:57     Operation performed     The message has been received by the mail system. Profile: XI URL: http://xxxxxxxxx:50000/MessagingSystem/receive/AFW/XI credential (User): XIISUSER
2010-07-19 07:24:57     Operation performed     With the connection RFC_http: / / sap.com / xi / XI / System. Attempted placement of the message in the queue of requests.
2010-07-19 07:24:57     Operation performed     Message queued dCaution
2010-07-19 07:24:57     Operation performed     The message has been retrieved from the queue dCaution queries.
2010-07-19 07:24:57     Operation performed     The status of the message has been activated on DLNG
2010-07-19 07:24:58     Operation performed     Paper channel: CC_R_RFC
2010-07-19 07:24:58     Operation performed     MP: entering
2010-07-19 07:24:58     Operation performed     MP: processing local module localejbs/RfcAFBean
2010-07-19 07:24:58     Error     MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method process.
2010-07-19 07:24:58     Error     Exceptions occurred for Adapter Framework: Exception in method process.
2010-07-19 07:24:58     Error     The dissemination of the message to the application via RFC_http: / / sap.com / xi / XI / System failed due to com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.:
com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method Process .. Enabled message "Failed".
2010-07-19 07:24:58     Error     The status of the message has been activated on FAIL
2010-07-19 07:24:58     Error     Return of the synchronous error message to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in method process.: Com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception method in process ..
Thanks and Regards,
Chinna
Edited by: chinnasapxi on Jul 19, 2010 10:55 AM
Edited by: chinnasapxi on Jul 19, 2010 10:56 AM

Hi Cinna,
>just now i checked the RFC it is working
this together with the header "Problem in the scenario SOAP to RFC Syn" is missunderstoobable. But ok, the error is inside RFC adapter: may be it cannot create the DIAG RFC call with the XML what you provided in RTW.
To be shure to have sent the right XML send a message but use a Message Mapping with RFC module as target.
Regards,
Udo

Error occurs in HTTP to RFC

HI,
When doing the exercise in TBIT40, I meet with a problem in HTTP to RFC. It always returns me such error msg in the html client: <SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: java.lang.NullPointerException</SAP:AdditionalText></SAP:Error>
I don't know what's the exact reason for that, however, I am sure the BAPI program is not called. Using SXMB_MONI, we can see the response message (from Service: HEDCLNT001 Namespace: urn:sap-com:document:sap:rfc:functions Interface: ZBAPI_PO_CREATE) with above error and no XML payload at all. There's no error in the request message. I suspect if the communication channel is not created correctly as the document doesn't give a clear description on creation steps.
My question:
1. Is there any method to test if the RFC could be called properly from XI side using the communication channel I created?
2. What is the possible reason for the error I just met with? Any available solution?
Thanks & Best Rgds,
Jerry

The error segment in the response message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: java.lang.NullPointerException</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Jerry

Error in my HTTP XI RFC (BAPI) senario

I have everything setup for the scenario, all of the RFC adapters have a green light in the adapter monitor and I run the 'Test Configuration' and everything runs fine. Though, when I send a HTTP request to the scenario I receive the following error
REQUEST: **************\n
POST /sap/xi/adapter_plain?service=Shaun&namespace=http%3A%2F%2FMyCompany%2Ecom%2Fpoc%2Fhttp2bapi%2FHTML&interface=BAPI_MATERIAL_GET_DETAIL HTTP/1.1\r
\n
Host:myserver.com\r\n
Accept: /\r\n
Content-Length:181\r\n
Authorization: Basic c21hbGxvbmU6Ym8kJDQyOSE=\r\n
\r\n
<?xml version="1.0" encoding="UTF-8"?>\r\n
<rfc:BAPI_MATERIAL_GET_DETAIL xmlns:rfc="urn:sap-com:document:sap:rfc:functions">\r\n
<MATERIAL>2051</MATERIAL>\r\n
</rfc:BAPI_MATERIAL_GET_DETAIL>
RESPONSE: **************\n
HTTP/1.1 500 Internal Server Error\r\n
content-type: text/html; charset=utf-8\r\n
content-length: 173\r\n
server: SAP Web Application Server (1.0;640)\r\n
\r\n
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>RCVR_DETERMINATION.NO_RECEIVER_CASE_BE</SAP:Code><SAP:Stack>No receiver could be determined</S
AP:Stack></SAP:Error>
finished.

Hi Shaun:
I have the same problem. How did you solve it? I don't understand you in "the wrong URL".
Thanks,
Alejandro.
Edited by: Alejandro Gómez on May 28, 2008 8:26 AM

Error in Scenario File to RFC

Hi Experts,
I´m with a problem in a interface FILE->XI-RFC (assynchronous).
I created a file in FTP directory and configured adapter file with pool 60 sec.
I´m testing in MM is OK.
I´m testing in IM is OK.
In SXI_MONITOR is OK.
When I go to Runtime -> CC Monitoring, display following error:
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(1): com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing n.
Can someone help me??
tks

Hi peoples...
this problem was resolved...
My problem now is other...
I´m in RWB and now display this message:
Success     Channel CC_FILE_SENDER: Entire file content converted to XML format
Success     Send text file "sap_lims_file_1000000.txt" from FTP server "qtrsmrdev01:processar", size 431 bytes with QoS EO
Success     Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
Success     Trying to put the message into the send queue.
Success     Message successfully put into the queue.
Success     The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
Error     Attempt to process file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Does problem is tha absent module processor in adapter sender????
ROD

HTTP to RFC scenario, RWB error

Hi
I am following this scenario
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
I tried in RWB-->component Monitoring->Integration Engine and gave Header Information sender, interface, Namespace,
user, Password(XI user ID and Password), and Quality of Service Payload information also given from the message mapping If I click on send message Following error is displayed
Error Code: ICF-LE-http-c:000-l:-T:1-C:6-U:5-P:5-L:6
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
what is this error about ? How to solve this ?
Thanks, dushanth

Dear Dushanth ,
It is very simple ..
Go to SU01 , Select user XIRWBUSER and assign role SAP_XI_RWB_SERV_USER.
Just for your update :
XIREPUSER->User for the Integration Repository->SAP_XI_IR_SERV_USER
XIDIRUSER->User for the Integration Directory->SAP_XI_ID_SERV_USER
XIAPPLUSER->User for sender applications->SAP_XI_APPL_SERV_USER
XILDUSER->User for the System Landscape Directory->SAP_BC_AI_LANDSCAPE_DB_RFC
XIRWBUSER->User for the Runtime Workbench->SAP_XI_RWB_SERV_USER
XIISUSER->User for the Integration Server->SAP_XI_IS_SERV_USER
XIAFUSER->User for the Adapter Engine (communication between SLD, Integration Server, and Adapter Framework)
->SAP_XI_AF_SERV_USER_MAIN.
Regards,
Santosh Karadkar

Logon Error Message ( HTTP to RFC )

Hi all,
While I am practicing HTTP to RFC Scenario..
When I SEND data from test client ..It is asking for SAP Web Application Server (SID)
User ID and Password..
When I am giving my XI ID and Password ( and also i tried BASIS ID ,J2ee_admin, Even i assinged ROLE SAP_XI_APPL_SERV_USER ) it is giving Error like this
-->Logon Error Message
-->Error Code: ICF-LE-http-c:001-l:E-T:1-C:3-U:35-P:35-L:3
-->HTTP 401 - Unauthorized Your SAP Internet Communication Framework Team
-->Call of URL http://serverhost:8000/sap/xi/adapter_plain terminated due to error in logon data
-->Logon performed in system OPD. </li><li> Logon performed for client 001, user xiappluser, and language EN.
-->HTTP 407 Proxy Authentication Required - The ISA Server requires authorization to fulfill the request. -->Access to the Web Proxy service is denied. (12209) Internet Security and Acceleration Server
-->The gateway could not retrieve the requested page
These errors I am getting..
please guide me to complete this scenario.
Thanks in advance,
Ramesh.
( I am unable to search SDN ,due to some upgradation is going on )

Hi Sreeramoju,
1. HTTP-401 :
 If the Integration Server is accessed by means of an HTTP proxy server,the credentials must match those that you made in transaction SICF in the Integration Engine. If you do not specify a user and password combination, or the combination is invalid, the system will terminate each attempt to access the Integration Engine with the message Transport Exception: http-Error 401 Unauthorized.
The user must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
If you want to use a different client or language to the default setting in the Integration Engine when logging on, you can also set the following parameters:
○ XI.Client=<client-no>
○ XI.Language=<language-id>
2.HTTP 407: Proxy Authentication Required" in SAP XI J2EE AE: check the SAP note: 992690
 Make sure that you have specified the proper host and port values, in the text box that appears when you check the configure proxy check box(in receiver adapter).
Looks like the webservice requires a proxy authentication.
Select the check box "configure proxy user authentication"(in receiver adapter) and provide the correct username and password.
*Pls: Reward points if helpful*
Regards,
Jyoti

Issue in HTTP to RFC scenario

Hi Experts,
i am working on HTTP to RFC scenario.From Http client i am sending data to integration engine.
i am unable to see any messages in SXMB_MONI.Means data from HTTP client not reached Integration engine.
why the data is not reaching integration engine?
This scenario needs any configuration settings in XI or any changes in HTTP client??
Plz suggest me in this issue?
Regards,
Bhuvan.

Hi Experts,
thanks for giving replies.
The response i am geting in HTTP client:
Result:
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/7.00 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> The requested resource does not exist.</td>
</tr>
<tr bgcolor="#FFFFFF">
 <td align="left" valign="top" height="48"> Details:</td>
 <td align="left" valign="top" height="48"><pre> Go to <A HREF="/" target="_parent">main page</A> of this application!</pre></td>
</tr>
</body>
</html>
Regards,
Bhuvan.

HTTP to RFC synchronous scenario Issue

Hi Folks,
Currently I'm working on a HTTP to RFC synchronous scenario. Everything went well till i triggered the message. While triggering the message i'M GETTING IS AS BELOW
Result:
http-Status: 500 Internal Server Error
Payload:
<SAP:Error>
<SAP:Category>Application</SAP:Category>
<SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Comcode_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_MM_Comcode_: </SAP:Stack>
</SAP:Error>
I also tried executting the message testing tool to see the trace and the below result I got
<?xml version="1.0" encoding="iso-8859-1" ?>
- <Top>
<First>BeginTrace</First>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is determined</Trace>
<Trace level="1" type="T">Interface Mapping http://www.http-rfc.com IM_Comdet</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping CA9DBC0BCB27311FBAA3C4CE387CEC3B</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 226C2EB123A711DFC0F4FAEBC0A80020</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Comcode_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 3</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Comcode_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Comcode_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Comcode_ completed. (executeStep() of com.sap.xi.tf._MM_Comcode_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
</Top>
But still I'm not able resolve this issue kindly help.
Regards,
Santosh

Looks like there is some mapping problems ,may be the RFC connection is not properly configured .Here is the link to configure the connection between ECC and PI :
http://wiki.sdn.sap.com/wiki/display/XI/ConnectionSettingsbetweenECCandPIsystem
May be there is no value retrieved from the ECC system so it is saying null value.
For proper configuration check you can refer the following blog:
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
I am a beginner so not the full answer is there but may be this would help you.
Regards
Ravi Anand

HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:

hi all,
I am doin a http to rfc scenario.In moni it is showing a mapping error in the request mapping and showing this error.In IR my mapping is working fine but in payload runtime i found the error is because it is showing <?xml version="1.0" encoding="UTF-8" ?> twice.Below is the payload message
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Lspm_Request_SampledueGrid_MT xmlns:ns0="http://satyam.com/xi/LSPM">
<KUNNR>100000</KUNNR>
<FROM_DATE>15.11.2006</FROM_DATE>
<TO_DATE>10.12.2006</TO_DATE>
- <EQUIPMENTID>
- <item>
<EQUIPID>wb</EQUIPID>
</item>
</EQUIPMENTID>
+ <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
BP260
</OILID>
</ns0:Lspm_Request_SampledueGrid_MT>
I tested using view source code and removing the extra ]<?xml version="1.0" encoding="UTF-8" ?> in IR and it is working fine.
Now my problem is how to rectify this error can anyone help me out please??
thanks,
Nisheeta

hi,
I tried to post the XML in the http page without the header and now it it showing a new error
Result:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)</SAP:AdditionalText></SAP:Error>
http://cgnsap27:8000/sap/xi/adapter_plain?namespace=http%3A//satyam.com/xi/LSPM&interface=Lspm_SampledueGrid_Syn_MI&service=SATYAM_LSPM_BS&party=&agency=&scheme=&QOS=BE&sap-user=shailesh&sap-password=shailesh&sap-client=100&sap-language=EN
wat does this mean??
nisheeta

HTTP to RFC scenario (Message not coming to PI)

Hi PI Gurus,
I got one HTTP to RFC scenario. Its working fine in production. where as it is not working in QA sys.
Messages are not coming to PI (SXMB_MONI). Is anything is missed in SICF or SMICM.
Thanks,
Krishna

Hi,
How you are testing the interface.........if you are sending the message from HTTP client web page then check the error message in same web page.
for reference check below link.
http://www.****************/Tutorials/XI/HTTP/RFC.htm
HTTP client code.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards,
Phani

Error in Http to RFC

"process_openMessage" or "onProcess_openMessage" not found!
i got the above error when tested in RWB .

hi
i am trying to make a http to rfc scenario
i m done perfctly with ir part
i m little doubtful on the id part
i assngd to Businesss systems
one ECC for teh application servre where i have configured RFC receiver adapter
two. Businee_system for which i have created the Softwarte component used in IR(i.e is maintained in SLD for the oftware component used in IR)
i dint create any communication chaale for this
now i continued by creating the receiver determination,interface determaintion and receiver agreement
where i mentioned the Businees_system for the sender service and interface created in IR as the interface for receiver determination,interface deterrmination
and receiver agreement

Response structure empty for HTTP to RFC synchronous scenario

Hi experts,
I have a HTTP to RFC synchronous scenario.
The request is given to Price List ZBAPI.
The input to the BAPI is date, material no, customer no and condition type.
The output I am fetcching from access sequence table into the table FINAL type structure ZFINAL which is
then sent back to source as a response.
But the problem is that I get this table as empty although BAPI returns data
Regards,
Mozila

Dear Mozila,
How did you check that BAPI returns data? Did you use an exact message sent from PI to the receiver business system? If not, I would suggest to take the message which was sent by PI to the receiver business system and use it when performing BAPI test.
Are table contents received by RFC adapter on PI side (can you see BAPI execution results in message contents for response message received by RFC adapter)?
Can you see any errors in RFC communication channel?
Did you check message monitor in Integration Server for the particular message? Are there any errors?
Please also check your message mapping - this may also cause the error in case RFC adapter receives correct results, but HTT client receives empty table.
My regards,
Vadim

Transport of HTTP - XI - RFC scenario

Hi all,
I have tested a HTTP - XI - RFC scenario on one XI server (say 'source'). Now I wish to transport it to another XI system (say 'target') using CMS and separate SLD's exist for source and target systems.
For RFC, a technical system (TS) and business system (BS) have been created on source as well as target.
Now for CMS I need to replicate the TS & BS of target on source, and specify transport target for source BS.
However the TS is basically an R/3 app server where RFC resides. So at source, when I create the TS corresponding to target, the system gives error that TS with same client already exists. In turn, I am also not able to create target's BS on source.
Pls suggest a way out...
Thanks,
- Shankar.

Hi Siddarth,
Well, my development is complete in the sense that I have tested the scenario on source. It is a simple application where I send 2 no.s from HTTP client which through XI, calls an RFC, which in turn returns the sum of the 2 no.s This reply can be seen in HTTP client, thus verifying the process.
I haven't considered the business service option. I will try out that also...
R/3 server is same for DEV as well as Test systems.
Thanks,
- Shankar.

Cannot create HTTP client Exception in Http -- XI -- RFC scenario

Hi,
We are testing Http --> XI --> RFC scenario
While testing this scenario from RWB we are getting following error message in the SXMB_MONI logs:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_CREATE_FAILED</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Cannot create HTTP client (exception 1)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Following is the info from the Trace:
<Trace level="1" type="System_Error">cl_http_client exc = argument_not_found</Trace>
We have tried following things:
1. In SICF we made sure the /default_host/sap/xi/adapter_plain is active
2. Applied SAP Note: 716739
Any response will be greatly appreciated.
Thanks,
Paresh

Hi UDO,
Thanks for your reply. The error was gone when I tested again this morning. I am guessing it must be the SAP Note 716739 that we applied and might not have refreshed the cache.
I am still intereseted in confirming what exacly fixed this issue.
As per your suggestion, I looked at the left Nav bar and the error was at the "Call Adapter" step. Even in the log message it says the same. The reciever/interface determination and mapping were successfull. I could successfully test the scenario in the integration directory.
Here is what the 716739 Note said:
Symptom
If you call the Integration Server from a sending Integration Engine (proxy), the following error message occurs:
Category = XIServer
Area = INTERNAL
Id = CLIENT_CREATE_FAILED.
In transaction SXMB_ADM, you used the Configure Integration Engine function to enter a URL of the type http://<host>:<port>/sap/xi/engine?type=entry instead of a URL of the type dest://<name>.
Other terms
SICF, SXMB_MONI, SXMB_ADM, XI
Reason and Prerequisites
You have configured the communication route from the sending proxy (Integration Engine) to the Integration Server using the URL of the type
http://<host>:<port>/sap/xi/engine?type=entry and have saved the logon data on the Integration Server in the Service
/sap/xi/engine (transaction SICF).
A program error has occurred: the communication log is not correctly set when the HTTP client is set up.
Solution
The problem is eliminated with SAP_BASIS Support Package 2. To eliminate the problem, you can use an URL of the type dest://<name>, where <name> refers to the name of a HTTP destination that you have maintained with transaction SM59.
Now, I was not using the proxies but Http post to XI. Do you guys also think this might have fixed my issue?
Thanks,
Paresh

Error in scenario HTTP - XI - RFC SYN

Similar Messages

Maybe you are looking for