Error in SCM production system

We are getting following 2 errors in SCM production system. Does anybody know what could be the reason
Time series error in class /SCF/CL_ICHDM_DATAAXS method /SCF/IF_ICHDMAXS_2_CNTL~SELECT
Access error for time series type, key figure INTRANSITORPL,ODM message
Regards,
Vaibhav

Hi Vaibhav
Note 1420372 & 1454608
Please implement them, there are some manual steps too
After that go back to screen, Use refresh button , The reported error will not appear
Regards
Vinod

Similar Messages

Program is erroring out in production system due to transport being missed

hey,
we are having a issue where program is erroring out in production which works perfectly fine in dev. we are guessing because of transport is being missed to move to production.
what is the best solution.
is there way in SAP where we can overwrite a whole program with a current program in dev using a transport so that program will contain latest code. how to create such transport. i created using write a transport entry option in se80 where i recreated a workbench request transport which errored out as welll. what are other options.
thanks

Ramakrishna
Looks like this is for the tax line (based on the fact that it is trying to update the link_to_line_id). The issue seems to be from the duplicate interface_line_attributes for the two different lines.This leads to this query returning more than one row for the tax line when it is trying to update.
For two different lines, make one of your interface_line_attributes (in this query I see 1, 13, 14, 15) unique.
Thanks
Nagamohan

IDOCs error in Production System

Hi Gurus,
In Production system, there is a CRM oppertunities process chain is running on hourly basis, the data was updated to DSO successfully, but for the past one week it was not updating to further processing InfoCube, there is an error.
error: Idoc Ready to be transferred to application.
Please update me step by step procedure.
Thanks

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Error In webdynpro java application in production system.

HI Friend ,
   I am getting the following error in the production system, but it is working fine in the develop system and quality system.
             com.sap.dictionary.runtime.DdException: Type com.itc.espb.fetchmodel.types.Yypp_Teco_Orders does not exist
             at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:413)
             at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:587)
             at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:287)
             at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:94)
             at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:169)
Please let me know what is the problem it's urgent ?
Thanks & Regards,
Murali

Hi Murali,
    Looks like the related RFC from backend has not been transported to the production server. Please check if the RFC is transported. You can check your named transport requests in SE09 T.code in your quality.
Hope it helps.
Regards
Uday

Runtime error DBIF_REPO_SQL_ERROR in production server

Hello All,
I am recieving the following running time error in my Production system. Any help would be really appreciated.
Runtime Error          DBIF_REPO_SQL_ERROR
       Occurred on     06.09.2009 at   19:16:45
*SQL error 3114 occurred when accessing program*
What happened?
The system is no longer linked to an ORACLE instance.
No further operations can be performed on the database.
What can you do?
You cannot eliminate this error yourself.
Please inform your database administrator.
Make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
With transaction ST22, for dump analysis, you can see and manage
termination messages and, in particular, save them for longer periods of
time.
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The system attempted to access an ORACLE instance to which it is
no longer linked.
This can occur if the ORACLE instance has been stopped due to an
error or an external operation.
How to correct the error
Database error text........: "ORA-03114: not connected to ORACLE"
Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
The current status of the ORACLE instance cannot be determined.
It may still be inactive or the database administrator may have
restarted it.
In any case, all systems that have accessed the ORACLE instance
must be restarted after the ORACLE instance has been restarted.
If you were working on a central system, inform
your system administrator.
If you were working on an external local system, inform
the person responsible for this system.
If you were working on your own local system, restart
the system yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLSALA" or "LSALAU01"
"SALA_UPDATE_TRANS_SPEZ_MON"
If you cannot solve the problem yourself, please send the
following documents to SAP:
Already we have checked the SAPnotes 534729, 135942 and 112266 advice to configure all network
components on the same fixed speed and full-duplex, instead of using the auto-negotiating.
Please suggest... thanks in advace.
Regards,
Suresh
Edited by: Suresh Kalagarla on Sep 9, 2009 11:27 AM

I'd say the dump tells you what you need to do:
> -
> What happened?
> -
>
> The system is no longer linked to an ORACLE instance.
> No further operations can be performed on the database.
>
> -
> What can you do?
> -
>
> You cannot eliminate this error yourself.
> Please inform your database administrator.
> Make a note of the actions and input which caused the error.
> -
>
> To resolve the problem, contact your
> SAP system administrator.
>

OPEN ITEMS EXTRACTION (FPBW) cancel in productive system... HELP

Hello!
I have received this message when I executed FPBW transaction, Open items extraction for BW... I have looked in Notes OSS but nothing... Could you helpme please? Do you have any idea what was the problem??? I think it is Basis problem in Database, but I am not sure, please it is urgent, because the error was in productive system---
The exception must either be prevented, caught within the procedure
"FETCH_CURSOR"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01555: snapshot too old: rollback segm
number 169 with name "_SYSSMU169$" too small"
Internal call code.........: "[RSQL/FTCH/DFKKOP ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLFKKOP03" or "LFKKOP03FR1"
"FETCH_CURSOR"

Hi,
How you resolved this issue?
If you are having the solution for this please share with me as well.
and one more thing, how can we schedule these two jobs in background for daily loading the data into DFKKCIBW and DFKKOPBW.
Please share these two things with me.
Thanks in advance.
Srinivas

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Error while transporting ADDRESS to production system

Hi all,
We are in the process of a new rollout and we have created new plants and company codes. the same have been transported to quality and pre-production systems without any issues. however when we transport the same to Production, we face an error
The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
The object
R3TR TDAT ADDRESS_4.6*
has not yet been imported into client 100 without error.
the objects are getting transported with same address number as in development which in production points to a different address.
as far as i know the system should generate a new address number and assign it to the object during transport.
Any suggestion wud be great

the log is
 Post-import methods for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Post-import method AFTER_IMP_CUST_ADDRESS started for ADDRESS_4.6 T, date and time: 20090714144548
 Post-processing taking place in client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 The object TDAT ADDRESS_4.6 has not yet been imported successfully into client 100
 Post-import method AFTER_IMP_CUST_ADDRESS completed for ADDRESS_4.6 T, date and time: 20090714144548
 Post-import methods of change/transport request MEDK909182 completed
 Start of subsequent processing ... 20090714144547
 End of subsequent processing... 20090714144548
 Execute reports for change/transport request: MEDK909182
 on the application server: ITMISAPGW2
 Reports for change/transport request MEDK909182 have been executed
 Start of................ 20090714144548
 End of.................. 20090714144548
 Execution of programs after import (XPRA)
 End date and time : 20090714144548
 Ended with return code: ===> 8 <===
regards,
Tarun
Edited by: Tarun Bahal on Jul 16, 2009 9:41 PM

Hierarchy loading Error in Production system

Hi All,
I am loading Hierarchy file, the file is there in application server(AL11), in external tab i gave same path. but when i try to load it is showing below Error message.
Invalid entry, hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Diagnosis
Hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist.
Procedure
If the underlying InfoObject supports hierarchies create the hierarchy and try again.
If hierarchies are not supported, select another InfoSource or change the definition of the InfoObject.
That means Hierarchy file problem (OR) In Info package I selected Hierarchy selection problem?
Kidnly help on this issue.
Cheers,
Srikanth.
Edited by: srikanth on Apr 21, 2009 11:49 AM

Is this only happening in your production system? Have you tried loading the hierarchy file to your development or acceptance system?
I've seen this error occur when the authorizations are not set up for loading hierarchies (i.e. maybe they can only be loaded via process chains under the remote ID used for process chains, and not using your own ID). That's why I was suggesting you try to load the same file to your dev and acc systems and see if you get the same error. Sometimes this error is thrown for other reasons and does not really have to do with the file being loaded or the hierarchy missing.
Also, if you're loading from the App Server, double-check that you have the Application Server radio button selected on the tab where you select the file path.
Good luck!

Error in Importing standard SAP DCs to Production system

Hi All
I am trying to do a transport from QA to Production system. 3 of the standard components
sap.com_GP-CORE
sap.com_CAF-MF
sap.com_CAF
are not getting imported to Prod. It gives an error
caused by Exception:com.sap.cms.tcs.beans.exception.TCSDeployException_Communication: The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.:The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.
com.sap.cms.tcs.beans.exception.TCSDeployException_Communication: The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.
The user is not locked. I managed to import the rest of the components to Prod with the same user ID.
Only thing i am able to notice is that, the Owner for these 3 components are "jointadm" and the rest of the other components had owner as "Make".
Please give me your suggestion.
regards
Deepu

HI,
Under the runtime systems tab in CMS lanscape configurator,
check the username and password details given for thr production runtime system .
also once save the configuration.
Regards,
Satya.

Update Statistics of CRM Production system is terminated with errors

Dear All,
Update Statistics of CRM Production System is failing ie terminated with errors.
Kindly help.
Following are the logs:
BR0973W Database operation alert - level: WARNING, operation: cegnnbuz.chk, time: 2011-08-12 09.32.37, condition: Last successful 'chk' op
BR0252E Function fopen() failed for '/oracle/KPC/saptrace/diag/rdbms/kpc/KPC/trace/alert_KPC.log' at location ora_alert_check-1
BR0253E errno 13: Permission denied
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.36
BR0977I Checking database profile...
BR0978W Database profile alert - level: ERROR, parameter: COMPATIBLE, value: 11.2.0 (<> 10.2.0)
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 11198464 (>< 4096,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_INDEX_COST_ADJ, value: 20 (set in parameter file)
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.36
BR0980I Number of changed database profile parameters: 0
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.37
BR0955I Number of signaled error/warning/exception alerts for database administration: 0/0/0
BR0956I Number of signaled error/warning/exception alerts for database operations: 0/1/0
BR0957I Number of signaled error/warning/exception alerts for database messages: 0/0/0
BR0958I Number of signaled error/warning/exception alerts for database profile: 1/2/0
BR0806I End of BRCONNECT processing: cehmkvis.chk 2011-12-22 04.07.37
BR0280I BRCONNECT time stamp: 2011-12-22 04.07.37
BR0804I BRCONNECT terminated with errors
Thanks
-Madhura

Hii
I ve checked all conditions as:
1. -rwxrwxr-x 1 orakpc dba 3406704 Aug 12 16:54 brtools
2.
SQL> show parameter compatible;
NAME TYPE VALUE
compatible string 11.2.0
3. Brtools version is 7.00 and oracle is 11G
4. drwxrwxrwx 6 orakpc dba 6 Aug 7 14:19 saptrace
Still we are facing this issue.
pls help.
-Madhura

Error while creating product group

hi,
i am getting error while creating Product group.
Required parameters missing when calling up module
Message no. M3749
Please suggest me.. how to cop this
Regards,
amit

Dear Brahmankar,
I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
Please suggest me , this process is correct or it will create any problem in any module .
Thanks & Regards
Prabhakar

Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
Thanks

Hi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Fetch data from a table present in production system

Hello Gurus,
I want to get data from a table which is present on production system. And i cannot create RFC. Can anybody tell me any other way of getting the data?
Thanks in advance!!
Regards,
Kumail

Hi,
if it's just a one time requirement to get the data from the table into an excel sheet e.g. for some error analysis or for making a development decision, why bothering with development? Just run se11 or se16 display the whole content and save it as excel sheet via the menu. This would be the fastest solution in my opinion.
If you do not have the permissions to see the table in production ask a admin or super user. Creating a program to dump data from the system you are not really allowed to see usually brings you in a lot of trouble :o).
Kind Regards
Roman

Error in SCM production system

Similar Messages

Maybe you are looking for