Error in screen painter

Hi all,
I am trying to open layout in screen painter SE51, but i am not able to open it.Instead some editor type screen is opening .
Also I am getting error ' EU_SCRP_WN32:timeout during allocate/CPIC-CALL:'ThSAPCMRCV''.
Can anyone please tell me the solution to this problem ?
Thanks

hi Meena,
There some problem with the installation of GUI ... Contact your basis consultant in this regard...
Regards,
Santosh

Similar Messages

  • Error Installing Screen Painter

    Hi..
    I have upgraded my SAP B1 to PL 42 but getting error when installing screen painter of this version....
    Thanks..
    Edited by: Pari Minhas on Nov 3, 2008 11:53 AM

    hi,
    please once again you unistall ScreenPainter and refresh the company.
    then
    goto:
    C:\Program Files\SAP\SAP Business One
    here you can find two files called
    AddOnsInstall.sbo and AddOnsLocalRegistration.sbo
    delete these two files and install the screenpainter once again.
    regards,
    varma

  • Data object error in SCreen painter?

    Hi friends,
                   I want to save the data in a table that is present on the screen when i click save this is my requirement.
    My table name is ZSDF
    work area- DATA:WA_WSST TYPE ZSDF.
    DATA declarations -
    Radiobuttons - data:radiobutton1 TYPE C,
                                  radiobutton2 type c.
    DATA:  WS(35) TYPE C,   " entry present for ws
                RADIO TYPE C,
                X TYPE C.
    PBO
    CAse WA_WSST-WS.
    when '1'.
    radiobutton1 = 'X'.
    when '2'.
    radiobutton2 = 'X'.
    PAI
    CASE SY-UCOMM.
    When 'ZRADIO'.
    if radiobutton1 = 'X'.
    WA_WSST-Radio = '1'.
    WA_WSST-WS = 'option one'.
    elseif radiobutton2 = 'X'.
    WA_WSST-Radio = '2'.
    WA_WSST-WS = 'option two'.
    endif.
    When 'SAVE'.
    WA_WSST-DESCRIPTION = DESCRIPTION.
    WA_WSST-WS = WS.
    WA_WSST-WSNO = WSNO.
    WA_WSST-EMPID = EMPID.
    WA_WSST-REQNO = REQNO.
    insert into ZSDF values WA_WSST.
    Hope you got my code--- in WA_WSST-WS option one or option two has to store according to the choice.
    The ERROR i am getting is
    The data object "WA_WSST" does not have a component called "RADIO".
    Please can you help me is this error..

    Hi,
    Does your table is haveing the field called 'RADIO'?
    If No,  that is the reason it is giving error.Because your work are is having the structure of your table ZSDF.
      WA_WSST-Radio = '2'.
    One more doubt have written the CASE statement code in ABAP editor or directly in flow logic editor.
    IF flow logic editor.Pls. declare  module under PAI and PBO and write code there.
    EX; 
    In Flow logic editor.
    PROCESS BEFORE OUTPUT.
      MODULE init_screen_100.
    PROCESS AFTER INPUT.
      MODULE user_command_0100.
    IN ABAP EDITOR
    MODULE init_screen_100 OUTPUT.
      CLEAR input.
      radio1 = 'X'.
      CLEAR: radio2, radio3.
    ENDMODULE.
    MODULE user_command_0100 INPUT.
      output = input.
      box1 = radio1.
      box2 = radio2.
      box3 = radio3.
      IF exit NE space.
      LEAVE PROGRAM.
    ENDIF.
    ENDMODULE.
    Pls. reward if useful....

  • Error while opening a screen painter

    Hi all,
    I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for your help!
    Regards,
    Priti

    For the Future Problem Facers:
    I too faced the same problem and the below steps helped me.
    Re: SFLIGHT is NOT defined for the current logical database.
    You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
    If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.

  • Screen Painter Error

    Hi friends,
    I am trying to load this "Screen Painter Layout" thingy from se80 but I always seem to have an error loading the graphical mode and brings me to the alphanumeric mode.
    The error message goes something like " gnetx.exe : No response from Graphic screen painting - Exiting "
    Any one has any idea why its doing this? Thanks in advance
    Regards,
    r3venant

    It should be ur GUI problem.
    Ask ur admin guy to reinstall and the first aid is to relogin by closing all the sessions and try again.
    Regards
    Gopi

  • ABAP : Screen Painter error

    Hi Experts ,
    I need your help. Actually i have started working in ABAP as welll. need to know that below is the coding being done for Screen Painter and need your help  in troubleshooting error. the Error is :
    "Program ZSCREENPAINTER1
    "TYPE LINE" or "LIKE LINE" expected, not "BEGIN". ."
    coding that i have done is :
    PROGRAM  ZSCREENPAINTER1.
    DATA : OK_CODE TYPE SY-UCOMM,
    types: BEGIN OF EKPO,
           EBELP TYPE EBELP,
           BUKRS TYPE BUKRS,
           WERKS TYPE WERKS,
           MATKL TYPE MATKL,
           END OF EKPO.
    thanks & regards ,
    M.S

    just to add to all these answers..
    '.' (Dot) acts as end of statement in ABAP as ';' works for C..
    and ':'(colon) is used for  pipeline or chaining more than one statement.. and chained statements are joined using ','(comma)
    so
    left side : right side1,
                 right side2,
                 right side3.
    "this actually means..
    left side right side1. " ends here
    left side right side2. " ends here
    left side right side3. " ends here
    hope you understand now... its BASIC abap...

  • ERROR: password is router string,cannot start graphical screen painter

    Hi Exprtts,
        I remotely Login SAP at home and I want to edit the screen by screen painter. But the system pop-up a message : password is router string,cannot start graphical screen painter. But at office I can start the screen painter and edit the screen.
    Any one can tell me why and how to solve this problem??Thanks in advance.
    Joe

    Dear Allen,
    Please have a look at Below Note
    SAP Note 898102 - Error message "Password in router string."
    Solution in Note is given as below.
    SAPGUI Release 620: Import GUI patch 59.
    SAPGUI Release 640: Import GUI patch 16.
    SAPGUI Release 710: Import GUI patch 03.
    Hope This Solve your Issue.
    If required also See OSS notes 204910 and 101971
    Regards,
    Lijo joseph
    Message was edited by:
            Lijo Vazhappilly

  • 6.7 Screen Painter error

    Hi all,
    I've just installed SBO version 6.7 and when I try to run the Screen Painter I get the following error message:
    Run-time error '-7000' (ffffe4a8)':
    Form - Invalid
    No forms have been opened, the error message displays when I click on the screen painter option in the menu. Does anyone have any suggestions of what's gone wrong? Perhaps I've installed 6.7 incorrectly?
    Lita

    I think the problem was fixed when I got SBO licensed? The 2004 version will not let you do things like upgrade to a patch unless you have a licensed version.

  • Screen Painter error when click or moving objects

    Hi all,
    from the last two or three releases of SAP B1, i get an error when i try to click with the mouse over a control in screen painter.
    The object over i click on, become very large (width = large int) and the same with the top property.
    Any suggestions ?
    Thanks in advance.
    Fausto.

    Fausto,
    Have you tried uninstalling and reinstalling the screen painter?
    Eddy

  • Screen painter initializing error.

    Hi all,
    This is an error that i am facing while starting screen painter.When starting screen painter from Add on manager it says
    User has no license for screen painter.Where as i have allocated addon license from addon manager to user.
    I am using SAP B1 2007b Pl 11,MSSQL 2005
    With regards ,
    Debabrata Kumar

    Hi Debabrata Kumar,
    Have you also assigned SDK license to the same user?  I believe Screen painter need SDK license too.
    Thanks,
    Gordon

  • Screen painter error: EU_SCRP_WN32 : timeout during allocate / CPIC-CALL

    Dear all
    When i using SE51 to open any screen , the screen painter can't give me the graphical layout editor and shows the following message:
    EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Message no. 37033
    Anyone knows what is the problem?
    Detail information :
    SAP GUI Version : 710 for window
    Fatch Level : 11
    thanks for your input.

    Dear All... I had same problem for many mounths... My solution has been the "NAME" of my computer. My name contains a special char ( ì ) and the server didn't answer at my "request" to launch the screen painter SAP.
    So try to change your "PC-Name" without special char (ex: "office") and try again to launch the Screen Painter.
    I'm sorry for my bad english and i hope this reply will be usefull for You.
    Paolo
    ITALIAN VERSION:
    Ciao a tutti, io ho avuto questo problema e non sono riuscito a trovare risposta; nelle innumerevoli ricerche in rete, con colleghi e persone più esperte di me sono riuscito a capire che lo Screen Painter di SAP in realtà è una sorta di "richiesta"  che viene fatta al server. Se il Nome del PC contiene caratteri speciali, il server sembra non rispondere e quindi si va in timeout.
    In pratica ho risolto formattando il PC ed in fase di re-installazione de S.O. ho dato come nome solo il mio nome di battesimo ed ho risolto. Ho dovuto effettuare un Format perchè nonostante avessi cambiato il nome del PC da schermata di Windows, la modifica non sembrava essere effettuata correttamente.
    Ho testato questo problema su diversi computer e il problema si è sempre risolto in questa maniera.
    Spero che questo contributo sia utile a tutti Voi.
    Rimango a disposizione per qualsiasi chiarimento.
    Paolo

  • Graphical Screen Painter error

    When i try to create a screen, the system show a message timeout loading gaphical screen painter, and open a screen painter alphnumeric.
    I try this in minisap 6.1 and netweaver, using sapgui 6.4.
    Guive me sugestions o solve m problem.
    Regards, thanks.

    Hi Janish,
    Reinstall your SAP "Front End"
    Regards
    Allan Cristian

  • Issue with Screen Painter Add-On after patch updation

    Hi Experts,
    We are using 2007 B PL10. We upgraded to PL 11 and now we are getting the following error while trying to start the Screen Painter Add-On.
    "Wrong Executable digital signature for Add-on"
    Please help!
    Thanks in advance
    Ajith G

    Hi Ajith,
    Check the thread
    Installing addons on client
    Regards
    Jambulingam.P

  • ABAP Dictionory type FLTP is nt allowed for  screen Painter!!

    Hello All,
    ABAP Dictionary type FLTP is nt allowed for  screen Painter!!  am getting this error message if am giving some input.
    Thanks
    santu
    Edited by: santu4u on Oct 23, 2009 1:48 PM

    Hi
    Instead of FLTP use Quantity or Currency or Packed Decimals type fields for the Screen Elements.
    While you save the data into the database if the database field is of type FLTP the values entered would be automatically converted into FLTP type. We need not take care of this.
    ---?? What do you mean by IDES version --->
    You mean in SE11 or SE16, Wherever it may be you can not use FLTP type on Screen Fields.
    This is Standard SAP Procedure, As mentioned Above you can use Packed Decimals or Currency or Quantity Fields
    Cheers
    Ram
    Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:10 PM
    Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:13 PM

  • SCreen Painter working not correctly.

    Hi,
    In se53 when we go to screen painter it's not coming properly..
    some line is coming.
    and we got EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'  error message.
    we have sap gui 710 with patch level 7.
    the dumpfile also generated.
    Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
    Date and Time          22.07.2008 12:44:27
    Short text
    The system is configured incorrectly.
    What happened?
    The current program had to be terminated because of an
    error when installing the R/3 System.
    The program had already requested 453411792 bytes from the operating
    system with 'malloc' when the operating system reported after a
    further memory request that there was no more memory space
    available.
    What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    In the system profile, set the parameters
    -abap/heap_area_dia and
    -abap/heap_area_nondia
    to a maximum of 453411792. To be on the safe side, reduce the value by 10,000,
    000.
    Then restart the SAP system.
    Error analysis
    When the program was running, it was established that more
    memory was needed than the operating system is able safely
    to provide. To avoid a system crash, you must prevent this
    situation from occurring.
    Last error logged in SAP kernel
    Component............ "EM"
    Place................ "SAP-Server mtw02sdec01_DE7_00 on host mtw02sdec01 (wp
    1)"
    Version.............. 37
    Error code........... 7
    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
    Description.......... " "
    System call.......... " "
    Module............... "emxx.c"
    Line................. 1881
    The error reported by the operating system is:
    Error number..... " "
    Error text....... " "
    How to correct the error
    Report the error to the group responsible for installing your
    R/3 System.
    Please help.
    regards
    deepak

    Dump is telling you what to do...
    Review abap/heap_area_dia and abap/heap_area_nondia
    I presume you try that before posting right?...
    Whats the issue then?
    Regards
    Juan

Maybe you are looking for