ERROR in SE38 Standard Program

Dear All,
I am facing one strange problem with ABAP EDITOR. Our Basis team have done some note applying in Development Client.
There was lot of notes, all in one request. It is been transported to Quality. There i think they got one Error.
Now the problem which we are facing is that, we are able to take SE38, but If you click Display or Change. Its going to a DUMP.
even in SE80 also. IF we try to activate any program its going to dump. the same problem is there in SE37 also.
The main Program its affected is SAPLS38E.
I am pasting some of the log from ST22
The current ABAP program "CL_WB_EDITOR==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLS38E " in include "LS38EU24
" in
line 63:
"FORM "GET_MASLANGU" does not exist"
When ever we click display or change one function module is getting called , this the point at which the dump is triggering.
call function ' SWITCH_FRAMEWORK'
call function 'EDITOR_PROGRAM'
Since its not allowing to do any thing we are not able to find the root cause. We have raised it to SAP also.
If any body have faced this issue please let me know.
Thanks in Advance.
Pradeep Alex Luke.

Dear All,
Thanks you all for the reply and support.
The Issue is been resolved.
As per SAP's reply We tries to do the Transport of Copi of certain program which we where getting DUMP like :
Program Name           SAPLS38E
INCLUDE Name         LS38EU26
INCLUDE Name         LS38EU24
This got transported with out any error and the issue got resolved.
Thanks & Regards,
Pradeep Alex Luke.

Similar Messages

Syntax error in SAP-standard program

Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
Zeba

Hello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM

ERROR while checking standard program for SAP NOTE 175482(QM)

HI,
experts
i am implementing sap note 175842 QM MODULE .
My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
but in se38 report comes like this
REPORT RQEVAC50.
REPORT RQEVAC50 MESSAGE-ID QA.
so while checking error comes boz 2 report hedaing is there .
I WANT TO DELETE FIRST ONE BUT IT CANT.
I chose activate anyway but while releasing request it gives error.
THANKS
AJAY.

hi
error is 'OBJECT REPS RQEVAC50 does not exit create it'**
I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
THATS THE MAIN PROBLEM.
Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
so there are 2 report hedaing .
THANKS
AJAY.

Error: While Copying Standard Program FBCJ

Dear Experts,
I tried to copy the standard program because the requirement was to change the menu fuction for save and post.
So i copied the T.Code FBCJ to ZFBCJ. It Copied Successfully and i assigned the tcode also. But While executing the T code
the system Shows the error message
"System error in routine FI_TAX_GET_TXJCD_STRUCTURE
error code 1 function builder TAX2"
Kinldy help me to resolve this issue.
Waiting for your valuable replies.
Kindly give some ideas.
Thanks and Regards,
Karthik V
Edited by: karthikani on Nov 24, 2010 10:30 AM

Hi,
are the both client environments hav same version (ECC 6).
In ECC 6 version type X is not allowed.
To avoid this problem,
you need to declare the field of TYPE C.
you need to get the value from Cl_ABAP_CHAR_UTILITIES.
Regards
Sandeep Reddy

Error in VL10I Standard Program

Hi All,
          I was asked to debug standard program VL10i where not all deliveries are getting created when done together.
some of them misses out.When I run then individually it works. Sometimes if you run in small batches it works..sometimes it wont. The behaviour is so strange.
The error is " Transfer Paramaters are not complete ".
Can anyone suggest me any OSS notes to solve this issue or known solution.
Regards,
Anand

Dear All,
Thanks you all for the reply and support.
The Issue is been resolved.
As per SAP's reply We tries to do the Transport of Copi of certain program which we where getting DUMP like :
Program Name           SAPLS38E
INCLUDE Name         LS38EU26
INCLUDE Name         LS38EU24
This got transported with out any error and the issue got resolved.
Thanks & Regards,
Pradeep Alex Luke.

Abap run time error during se38 new program creation

when i try to create a new program, I get runtime error and it says start_call_sick
details: database inconsistency : start transaction SICK.
TRIGGER LOCATION OF RUNTIME
PROGRAM: SAPMSYST
INCLUDE : SAPMSYST
ROW 1.763
MODULE TYEP MODULE PAI
MODULE NAME D020_SNC_CHECK_EXTID
AND IT ALSO SAYS: KHA ( SYSTEM ID ) : SYSTEM RESTARTED
WORK PROCESS RESTARTED
SESSION TERMINATED.
ANY IDEA HOW TO SOLVE THIS ERROR?????
ITS ECC 5.0 WITH ORACEL DATABASE AND WIN 2K3 SP1 OS.
WAITING FOR REPLY
CHEERS
kHALIL
POINTS WILL BE AWARDED.

when i try to create a new program, I get runtime error and it says start_call_sick
details: database inconsistency : start transaction SICK.
TRIGGER LOCATION OF RUNTIME
PROGRAM: SAPMSYST
INCLUDE : SAPMSYST
ROW 1.763
MODULE TYEP MODULE PAI
MODULE NAME D020_SNC_CHECK_EXTID
AND IT ALSO SAYS: KHA ( SYSTEM ID ) : SYSTEM RESTARTED
WORK PROCESS RESTARTED
SESSION TERMINATED.
ANY IDEA HOW TO SOLVE THIS ERROR?????
ITS ECC 5.0 WITH ORACEL DATABASE AND WIN 2K3 SP1 OS.
WAITING FOR REPLY
CHEERS
kHALIL
POINTS WILL BE AWARDED.

Runtime error ITAB_ILLEGAL_SORT_ORDER_BLK in standard program

Hi Friends ,
I am getting dump itab_illegal_sort_order_blk i main program RBDAPP01in method CHECK_EXistence. please help.

hi Chitra,
typical question you have to make a search on OSS, if there is no result you have to ask them, chances are better that you get the answer you need, than here.
ec

Unicode Error in standard program

Hi,
Iam working on an upgrade project
I am getting an error as below
"In Unicode, DESCRIBE LENGTH can only be used with the IN BYTE MODE or CHAR mode"
How to fix this error, as the error is from STANDARD PROGRAM "Include /IXOS/LDC_CF01"
I know the answer to fix it, But since it is a STANDARD PROGRAM ,how to modify standard program\
Thanks,
Arjun

Dear Arjun,
I had to make some adjustment to an upgrade recently where we also had to upgrade programs to be UNICODE compliant.
And we had to do this for Custom and Standard programs.
So, before writing a message for SAP, go to transaction:
UCCHECK
It was using this transaction that I adapted my Standard SAP programs.
So you should be ok with this as well....
If you have been there already, then by all means do write a message to SAP.
Kind Regards
/Ricardo Quintas

Runtime Error In copy Of SAP Standard Program

How do people,
I have copied a SAP standard program H99CWTR0 because I need to add an extra
column output in the report. I have made a few chnages regarding the INCLUDES
When I run the program I am getting the following runtime error:
" The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
in program "%_T01050" is different from the calling program .....
My question is that it says the error in program "%_T01050" !!
But when I enter this in SE38 it says it doesn't exist !
Any ideas???
Andy

Thanks mate for replying.
I'll have a look at what you suggest
Andy

Substitution activation program error in SE38

Dear Expert,
When I execute the program (RGUGBR00) in SE38 I am getting error like
002 User exit UFP00 not declared in form pool ZGGBS800.
I think some note is missing.
Can anyone let me know above the issue?
Thanks & Regards
Selva

Hi,
For using exit in substitution, you need to make changes in the ZGGBS800 program at 2 places:-
(1) Defination of exit UFP00 in form pool table
(2) Defining the code for this exit UFP00.
So please check this program in SE38. (You can also refer the standard program RGGBS000 for the way to define the exit.)
Also check in V_T80D vie in SM30, whether this program ZGGBS800 is assigned properly or not.
Regards,
SDNer

Error While executing the Standard Program RSEINB00

Hi,
I am trying to execute the Standard Program RSEINB00.
The input parameters for this program are
1. File path along with name
2. Port.
File path I am giving the application server directory along with the filename.
For port. i have created a port in WE21.
For both outbound parametes I selected the Physical directory and gave directory name and file name in both tabs and saved the port definition.
Now I am passing the port to the RSEINB00 program.
it is giving an error File cannot be opened.
Can any one help me on this. Can someone guide me how to use RSEINB00 to read file from application server.
thanks

Hi,
I think,you missed out some steps while creating Port.so please follow the below steps to resolve the issue.
we21->click on your port number->outbound file tab->function module: EDI_PATH_CREATE_MESTYP_DOCNUM.
outbound file: give file name .txt.
and give the physical directory : /usr/sap/.......................................txt and save.
and click on 'ACESS TEST' button and check any error is coming.
go to outbound trigger tab-> give RFC destination name which we have created under a port in SM59.
and one more important thing is check your unicode status is active or not.
.Please get back me .if any issues.
Kiran J

How can I display error log of a standard program in my custom program?

Hello Experts,
I have a requirement where I submit a standard program from my custom module pool program as a background job. I use the TO SAP-SPOOL and thus the log is available when I go to SM37 and check the spool list. I have a requirement that I display this log in a tab within my module pool after the completion of the program. I am unable to fins a proper solution to this. I have both the spool number & the log number but I am unable to find function modules which will help me print them within my program. I found many ways to display it but as full screen and not with in my program.
Could someone please help me with this.
Thank You

Hi,
FM to read a spool request is "RSPO_RETURN_ABAP_SPOOLJOB".
If the error log is displayed as a list output in the standard program, you can also use the syntax SUBMIT Program... and RETURN with export to memory addition.
Then you will be able to read the list output from memory.
Regards,
Munesh.

Runtime error in Standard program "SAPMV45A"

Hi Expert,
i am getting problem in BDC , While creating the (sales order) VAO1 ,dump is occurs in standard program SAPMV45A. Because of in FM "Pricing_Dialog_Tabstrips" is incorrect and TAXI_TABSTRIP_C and TAXI_TABSTRIP_ITEM" specified here is a different field type.This is standard program we can not change field type. Kindly provide any OSS notes for this or any other solution.
STANDARD PROGAM - SAPMV45A
INCLUDE PROGRAM - MV45AF0F_FCODE_PKO4
ERROR - Runtime Error CALL_FUNCTION_CONFLICT_TYPE has occurred
Kindly help me, Its very uigent
Thanks & Regards
Md.MahaboobKhan

Hi Archana ,
Check is there any Inactive Versions in ur Systems ?
useful tcodes are SPAU /SPDD for tables
Regards
prabhu

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

Error in standard program RFBIBL00 - BBSEG-PRODPER 000000

Hi alls,
        I'm tring to execute the standard program RFBIBL00 with a file prepared by a my Z program but it stopped with the following message:
BBSEG-SEND /
BBSEG-PRODPER 000000
Editing was terminated. "
I tried to execute the same thing with a file prepared by the standard program RFBIBLT0 but tye systems stopped with the same error.
I found the SAP note 1171612 and I applied it because I'm working on SAPKH6008 patches but the same error occured.
In order to solve my problem (I only have to execute the standard Batch Input!! and in this step I'm only verifying the file) What do I have to do?
thanks
         Gino

Hello,
We get this error if the file format is wrong. The data depends on version too!!
Are you doing Batch input by using ZBSEG?
If yes, prepare file as per ZBSEG in ur system like below example.
If suppose ZBSEG has structure like below.
STYPE     STYPE_BI     CHAR     1
TBNAM     TABNAME     CHAR     30
NEWBS     NEWBS     CHAR     2
File should be like below.
1ZBSEG(25 spaces as it has to be 30 total)40
IF any field is blank, u should take special char / with same length which is in structure.
Above fields, wrbtr, prctr and newko are mandatory.
Then it should work.
check the test file format thoroughly
Regards,
Subbu

ERROR in SE38 Standard Program

Similar Messages

Maybe you are looking for