Error in SECATT - ATT 377 Control data is obsolete, rerecord (&1&2&3)

Hello,
I get an error while running a TCD REC secatt, in the log of the test configuration , there are red errors "ATT 377 Control data is obsolete, rerecord (&1&2&3)", although the secatt was sucessfully done (meaning i should get green light...).
I've implemented Note #965439, in order to solve this error.
but the error still occurs.
Any ideas...?

thanks AP for your reply.
I have deleted and I have recreated the file with new recording but the error still ramains.
Can anybody assist to solve the issue ?
Thanks in advance.

Similar Messages

Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT

Hello experts,
To create factory calendar holiday(t-code SCAL), I use t-code secatt for the purpose.
But when running the test configuration script, I face the following error
Error in eCATT command TCD SCAL
Message no. ECATT507
Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: <none> Callno: 000001)
Message no. TT377
I use a tab separated text file with numbering of records.
I read on this forum some topics about the error but it doesn't solve the issue.
Please suggest what should be done to avoid this error
Thanks in advance for your reply.

thanks AP for your reply.
I have deleted and I have recreated the file with new recording but the error still ramains.
Can anybody assist to solve the issue ?
Thanks in advance.

CATT ECC6.0 Control data is obsolete

The catt I use was created in 4.6c. Since the upgrade at ECC6.0, it displays the message after each running :
"Control data is obsolete, rerecord (VERBS-NAME: CREATEOBJECT CATT: create)
Error ATT377 in application transaction IW24
Message no. TT350
Can you please tell me why does this error occur and how to correct it.
Please suggest what should be done to avoid this error.
Your suggestions will be of great help for me.
Abdes.
Edited by: RACHID ABDESSAMAD on Nov 26, 2008 3:11 PM
Edited by: RACHID ABDESSAMAD on Nov 26, 2008 3:23 PM

HI Rachid,
I would assume you are using TCD command to record your transaction. Sometimes due to some controls like ALV, a TCD command would fail in the eCATT. Hence there are two options:
1. Rerecord your transaction with TCD. This might solve your problem, but it can also happen that it does not help at all because of those controls on the UI.
2. Record your transaction use SAPGUI command. SAPGUI command can handle controls much better. Hence your problem should be solved completely.
Additionally, for option 1, if you have got such an error and your data can still be created correctly, then you can use MESSAGE...ENDMESSAGE to 'allow' the error message of 'ATT 377 Control Data is obsolete'. But in this case, it would be necessary to check in the database to make sure that the data is really created. Otherwise, your eCATT would run with green traffic light, but actually there is an error.
Kind Regards, Qian

Obsolete control data in eCATT

Hello All,
I am getting the error message
' Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: <none>
Callno: 000001)' while executing the eCATT script. Could any one clarify what could be the possible reasons. I recorded the transaction using TCD mode.
Thank you in advance.
--Venkat

Hello Venkat
I cannot tell you the error cause yet I have experienced this error message too while recording a simple dialog transaction (like CG3Y).
I am not sure if this is a bug in eCATT (at SAP release 6.40) or somehow releated to the SAPGUI release (patch level) on the presentation server (i.e. the local PC).
Perhaps you could overcome this recurring problem using a different recording pattern.
Regards
Uwe

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regards

Dear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj

What will get rid of "EXC in EV handl: error bad NP object as private data"?

I am taking some online classes and whenever I am trying to do homework or send in my assignments or take a test this error report comes up: EXC in EV handl: error bad NP object as private data. What does this mean and how do I get rid of it? I need to be able to do my college work online and know that it is getting to the instructor. How can I know if my assignments and test and any other communication with my college are getting to the right place?

Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

DSEE 7 error code 12 - Sort Response Control for server side sort

I am using Sun DSEE 7, My application works fine for small data set (e.g. 1000) and gives me correct sorted result, but same code fails for large data set (e.g. 656000). I find that for large data set, I am getting the error "*javax.naming.OperationNotSupportedException: [LDAP: error code 12 - Sort Response Control];*". I have changed the look-throught-limit, size-limit and time-limit values to unlimited using dsconf utility. I changed db cache size, entry cache size to appropriate values and also i increased all-id-threshold, all-ids-threshold-eq, all-ids-threshold-pres to the max possible value (2147483646) for one index attribute which i am using in my query but still exception is coming. If i change my client code (Java code using JNDI) to use Context.NONCRITICAL for SortControl, the sorted result is coming fine for small data set (access log shows query as indexed) but result is not sorted for large dataset and also i see the query is now unindexed. I am using only one attribute for sorting. Please help me out what configuration i am missing here.

Exactly. There is no reason to have the LDAP server sort the
results during the retrieval.
Query of Query can be used such as:
<cfldap name="ldapResults" .....> 
<cfquery dbtype="query" name="sortedResults">
SELECT
FROM
ldapResults
ORDER BY
sprintcompany
,sprintpocrole
,sn
</cfquery>
Then, use the "sortedResults" query for the rest of your
processing.

Sales Order VA01 - "No control data for checking group 04 and checking rule

Dear Gurus,
When saving a sales order in VA01, I get the following message: "No control data for checking group 04 and checking rule A"
Can anyone explain to me what that means?
How can I correct this error?
Regards
Chris

Check this thread
[Re: Process Order Material availability check error|Re: Process Order Material availability check error;
thanks
G. Lakshmipathi

Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

Error in Starting Oracle BAM Active Data Cache

I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nanda

hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

How to modify changes of table control data in PAI

I have a table control where the columns are brought by dict fields.I am able to bring data into table control through an itab.
Now what i want is whenever user edits data in table control and clicks on save button the corresponding changes should be made in database.
For this according to my understanding we need to (in PAI) modify the changes in itab from the table control and then in SY-UCOMM of SAVE button we need to update in database table using itab.
For this , I am not able to write code for modifying the changes in itab from table control. Here is my code below.Please tell me how to do this.
PROCESS BEFORE OUTPUT.
MODULE FILL_DATA.
LOOP AT ITAB INTO ZEMPLOYEE_MASTER WITH CONTROL EMPTABLE CURSOR
EMPTABLE-CURRENT_LINE.
ENDLOOP.
MODULE STATUS_0001.
PROCESS AFTER INPUT.
LOOP AT ITAB.
   MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.
REPORT ZDATA_FORM1.
TABLES: ZEMPLOYEE_MASTER.
CONTROLS EMPTABLE TYPE TABLEVIEW USING SCREEN 0001.
data: begin of itab occurs 0,
       emp_no like zemployee_master-emp_no,
       name like zemployee_master-name,
       city like zemployee_master-city,
      end of itab,
      rowno TYPE I VALUE 1.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
MESSAGE 'Inside INPUT' TYPE 'I'.
CASE SY-UCOMM.
   WHEN 'SAVE'.
     UPDATE zemployee_master.
   WHEN 'EXIT'.
     LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT
*&      Module fill_data OUTPUT
*       text
MODULE fill_data OUTPUT.
select emp_no name city from zemployee_master into TABLE itab ORDER BY emp_no.
Describe table itab lines EMPTABLE-LINES.
ENDMODULE.                 " fill_data OUTPUT
*&      Module modify_itab INPUT
*       text
MODULE modify_itab INPUT.
* MODIFY itab from zemployee_master index
* MESSAGE 'Inside modify_itab' TYPE 'I'.
ENDMODULE.                 " modify_itab INPUT

Hi
In the following module of your code
MODULE modify_itab INPUT.
MODIFY itab from zemployee_master index tc-current_line " Where TC is the name of the Table control on the Screen
ENDMODULE.
Table control data gets refreshed on *enter*
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2165e990-0201-0010-5cbb-b5c2ad436140
Cheerz
Ramchander Rao.K

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found

Hi guys,
I am getting error 'REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found ' when run the report
and i m also use formula column in my report.
can any body help me why it's coming.
following code is used in formula column plz check and verify:
function CF_3Formula return Char is
T1 VARCHAR2(100);
begin
SELECT
     VAT_REG_NO INTO T1
FROM
     JA_IN_HR_ORGANIZATION_UNITS JIHOU,
     HR_LOCATIONS HL--,
     --MTL_TXN_REQUEST_HEADERS MTLH
WHERE
JIHOU.ORGANIZATION_ID=HL.INVENTORY_ORGANIZATION_ID AND
JIHOU.LOCATION_ID=HL.LOCATION_ID AND
--Jihou.ORGANIZATION_ID = Mtlh.Organization_Id AND
-- Hl.INVENTORY_ORGANIZATION_ID =Mtlh.Organization_Id AND
-- MTLH.ATTRIBUTE10=SUBSTR(HL.LOCATION_CODE,1,3) AND
SUBSTR(HL.LOCATION_CODE,1,3)= :TO_ORG1 ;
RETURN (T1);
end;
plz help me out.

Hi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios

Error in SECATT - ATT 377 Control data is obsolete, rerecord (&1&2&3)

Similar Messages

Maybe you are looking for