Error in Self-Diagnosis

Hi all,
When I go to dswp and click the solution, then click on Self-Diagnosis because it was showing yellow, but It does not go further. I get the following error: Please help!!
Service cannot be reached
What has happened?
URL http://sap-smp1.healthnet.com:8001/sap/bc/webdynpro/sap/dswp_sd_self_diagnosis call was terminated because the corresponding service is not available.
Note
The termination occurred in system SMP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sap-smp1_SMP_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Thanks,

just a little more detail from Ruediger's comment
Method 1:
   1. Execute SPRO
   2. Expand "SAP Solution Manager" --> "Configuration" --> "Basic Settings" --> "Standard Configuration of Basic Settings" --> "Solution Manager" --> "HTTP Services" --> "Activate Solution Manager Services"
   3. Then activate technical name SM_BASIC_SETTINGS (also make sure technical name WEB DYNPRO ABAP is activated)
Method 2:
   1. Execute SICF_INST
   2. Activate technical name SM_BASIC_SETTINGS (also make sure technical name WEB DYNPRO ABAP is activated)

Similar Messages

Self Diagnosis error

Hi All
As per the document of activating maintenace Optimizer , I try to create a new Landscape in our solution manager . If i try the solution_manager tcode and click the self diagnosis is gives the error message like below .
Service cannot be reached
URL http://solman.manager:8000/sap/bc/webdynpro/sap/dswp_sd_self_diagnosis call was terminated because the corresponding service is not available.
Note
The termination occurred in system SLM with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:solman_SLM_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Kindly give me the soluotion for this .
Regards
Selvan

Hi Selvan,
You need to activate
service dswp_sd_self_diagnosis
with transaction SICF.
Probably, further services have not been yet activated in your SAP Solution Manager.
Go to the IMG (transaction SPRO) and search for the corresponding IMG activity under Basic Settings (Area Solution Manager System).
Regards,
Ruediger

SMD and Self diagnosis not working

Hi Solman's,
I put my system to Stack 12. After that, SMD and Self Diagnosis not working any more. Here the message:
URL http://sv030488.myco-group.com:8001/sap/bc/webdynpro/sap/dswp_sd_self_diagnosis call was terminated because the corresponding service is not available.
Note
The termination occurred in system MMS with error code 403 and for the reason Forbidden.
SM59 connection test shows:
ERROR: program WEBADMIN not registered
how to register ??
Best regards
Wolfgang

Hello Wolfgang,
You have to activate the service dswp_sd_self_diagnosis.
Run transaction SICF, on Service Name, enter dswp_sd_self_diagnosis.
Right-click on the service and select "Activate Service".
Run the Setup Wizard of Diagnostics System on SMD to register the program WEBADMIN.
Best regards,
Paula

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

Self-Diagnosis: Automatic generation of the Include is inactive

Hi,
in transaction DSWP > Solution > Self Diagnosis I get warning "Automatic generation of the Include is inactive".
Do you have any idea to solve this problem and get it green?
Best regards,
Andy

HI There
Please check the below note for this issue:
1533366 - Self Diagnosis: "Old SDCC transaction is still active"
Best Regards
Jai wardhan

Solman Self-Diagnosis Alerts

Hello,
I am trying to solve some critical and very critical alerts within the Work Center -> System Monitoring -> Self Diagnosis section of Solution Manager (EHP1 SPS26).
I am getting odd alerts such as:
Alert MANAGED SYSTEMS SETUP WIZARD is not working correctly
Alert INTROSCOPE AGENTS is not working correctly
Alert E2E TRACE ANALYSIS is not working correctly
The details for these alerts on the "Alert Status" tab says to check the sub-alerts for further details on how to correct the issues. Initially I couldn't figure out where these sub-alerts were until I moved to the Functionality Status tab. If I select the functionality "Solution Manager Diagnostics Applications" or "Solution Manager Diagnostics Solution Landscape Configuration", I can see these individual alerts below with an additional sub-alert box. The problem is, I cannot select the alerts to see the sub alert.
I have uploaded a screen capture video showing the issue of being unable to select sub alerts so that it helps everything understand what I'm talking about.
[http://screencast.com/t/v1HIM5ydt]
I have no idea how to get rid of these alerts. Can someone suggest why I cannot see any sub alerts or perhaps what I can do rectify these problems?
Alex
Edited by: Alex Van Luven on Sep 27, 2011 3:36 PM

Hi Selvan,
You need to activate
service dswp_sd_self_diagnosis
with transaction SICF.
Probably, further services have not been yet activated in your SAP Solution Manager.
Go to the IMG (transaction SPRO) and search for the corresponding IMG activity under Basic Settings (Area Solution Manager System).
Regards,
Ruediger

Error during self calibration - PXI-4461

We are running Calibration Executive 3.2. We are using a PXI chassis and controller and trying to calibrate a PXI-4461 card.
In running the procedure, we received the following error during Self Calibration:
Error 200718 occurred at DAQmx Self Calibration.VI at step self calibrate.
Any guidance in resolving this issue would be appreciated.
Richard

Here is the info from the calibration report. I can email you a PDF of the report and also a screen capture of the error message which states: "Measurement taken during calibration produced an invalid AI gain calibration constant. If performing an external calibration, ensure that the reference voltage passed to the calibration VI or function is correct. Repeat the calibration. If the error persists, conatct National Instruments Technical Support.
CALIBRATION PERFORMANCE TEST DATA
DUT Information
Type: PXI-4461
Tracking Number: 33367
Serial Number: 33367
Notes
Customer Information
Name: Cal Lab
Address:
Purchase Order:
Notes
Environmental Conditions
Temperature: 23.0 C
Humidity: 13.0 %
Operator Information
Operator Name: administrator
Calibration Date: Friday, March 23, 2007
16:27:03
Notes: Error or termination
occurred. This calibration
may not be valid. Error
code: -200718 Error
message: Error -200718
occurred at DAQmx Self
Calibrate.vi at step Self
Calibrate Possible
reason(s): Measurement
taken during calibration
produced an inval
PXI-4461 Serial Number: 33367
Friday, March 23, 2007 16:27:03 Page 1 of 2
Standards used during Calibration
Type Tracking Number Calibration Due Date Notes
Fluke 5500A Multifunction
Calibrator
32261 3/15/2008
DMM 32260 11/21/2007
33250A 29536 10/13/2007
Calibration Results
Test Canceled
Calibration As Found As Left
Test Value Low Limit Reading High Limit PassFail Low Limit Reading High Limit PassFail
N/A N/A N/A N/A N/A N/A N/A N/A N/A
PXI-4461 Serial Number: 33367
Friday, March 23, 2007 16:27:03 Page 2 of 2

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and now seem to have slower operating speed, especially very slow upload of e-mail attachments. Anyone got a fix, or advice on self-diagnosing the underlying problem?

Try my Mac Performance Guide.
If that doesn't help, post back here with the results of all the things you tried to do as part of that guide.

Error in self service for my employee - Related Activities in MSS

Hi,
NW2004s SP9 EP7.0 ECC 6.0
we are trying to implement the self service for my employee in related activites functinality from the general information of team workset ( Team --> General informatio --> Related activities --> Self service for my employee ) in MSS which is a replicaiton of ESS in MSS functionality from the previous versions.
When
I click on any of the options like Personal data or Addresses it gives me a blank page with no information on it. (It does give a DONE message with error/warning message on the status bar of Internet explorer. The error message says getactivetrackingEntryValue() is null)
Do I need to do anything to get this page working. I do not see any config related to this.
Appreciate any inputs.
regards
sam

James,
I think the note refers to note been able to display the general infromation iView itself. I have implemented the note and am able to see the genral information iView. My issue is I am not able to perform "Self service for my employees" in "related activities" iView.
Thank for you reply and correct me if I am wrong.
Sanjay, I have raised the issue with SAP, in the mean while if you can please let me know the patches or a list of them that are requried thyat would be awesome. Sorry for asking you this, but the basis team here asks to tell them what is requried even though I do not have sufficient authorizations to check them.
Appreciate you help on the same.
regards
Sam

Satellite M30: Blue screen error - how to diagnose what it is?

I have a hardware problem but I am not sure of the exact nature. Although I looks like the hard drive or something communicating to it.
Some two weeks ago I started to notice performance problems when loading something from the internal hard drive: overall function of the computer (like mouse cursor movement, mp3 playback) became hampered when the harddisk was loading (saving was less of a problem).
This was NOT the case when loading data or executing programs from an external usb harddrive. Today I got a blue screen informing me that this crash was probably due to new hardware or software, followed by a physical memory dump and a harsh shutdown. I rebooted the computer, but got the same problem after the login screen.
Trying to start it up in safe mode didn't work either and after a couple of tries it never got to the login screen anymore -- a few seconds after boot start there was a flash of a blue screen followed by an immediate shutdown.
Anyway, I used the product recovery dvd-rom but the problem is still there, i.e. I can boot now but I get the same blue screen every hour at least (seems to correlate with usage).
Instead of running off to buy a new harddrive I want to be sure that that is the (only) problem, and not some motherboard issue or what have you.
Hence my question: how can I diagnose what's wrong with my notebook?

Generally the best way is if you have a friend with the exact same portable. You can then take out your ram, and try it in their notebook, and try their ram in yours. If the problem persists on their computer, and yours boots up, its the ram. If not, the ram is fine. Then do the same with the HDD, again, if the problem doesnt happen on your computer, but happens on theirs, the HDD is bad, if not, your either down to CPU or Motherboard. A general overheating CPU goes into protection mode and automatically shuts the computer off. You dont get an error with overheating. But if the CPU has problems processing information it can generate blue screens. One sure way to find out if the CPU is defective is to continously reboot the computer and note the blue screen STOP error. If it remains the same constantly, then it is likely not the CPU, but the Motherboard. If it constantly changes from one error to the next, and generates 3 or 4 different errors, then you likely have a bad CPU.

Error in Self Registration form

Hi,
Language field in the initial supplier self registration form is mandatory in ROS. Even after selecting english, it gives me error, select yr language. Pl let me know how to correct it. Is it related to config in web survey or is it html form error?
Regards,

Hi Pooja,
This error usually occurs when you have wrongly populated some other field. For ex : In email id you mention 'abc ' instead of 'abc at xyz.com'.
Pl ensure that all other fields are populated in the correct format.
It's a strange behaviour of the ROS_SELF_REG BSP page.
Regards,
Nikhil

Re: javax.faces.convert.Converter error, how to diagnose?

I’m rendering a region on a page. The region is a table which is entirely build in java. The .jsff for the region looks kind of like this:
<af:treeTable value="#{backingBeanScope.myBean.treeModel}" var="row" etc…. >
<af:forEach items="#{backingBeanScope.myBean.columns}" var="column">
<af:column binding="#{column.adfColumn}" />
</af:forEach>
</af:treeTable>
When a row selection happens, there is context menu build, where one of the menuitems pops a dialog. After the dialog is dismissed a return handler/listener is called:
public void propertyToolReturnHandler(ReturnEvent event)
AdfUtil.showMessageDialog(AdfUtil.MESSAGE_TYPE.INFORMATION, “some msg”, “some msg”, true);
Notice the last param to showMessageDialog, which is “true”, as I want to show the message as inline. However, having it set to “true” causes the following exception. If I set it to “false”, then it does work and a popup message appears with the “some msg” text.
I’m truly stuck trying to figure out what Converter is missing and where. Any ideas will be most welcomed!
The error I get:
[Ljava.lang.Object; cannot be cast to javax.faces.convert.Converter
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #2
Examining the EMGC_OMS1.out file I see (partial):
<Apr 10, 2013 2:39:38 PM PDT> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #2
java.lang.ClassCastException: [Ljava.lang.Object; cannot be cast to javax.faces.convert.Converter
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getConverter(ValueRenderer.java:197)
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.addClientConverterRenderScript(ValueRenderer.java:220)
     at oracle.adfinternal.view.faces.renderkit.rich.OutputLabelRenderer.encodeAll(OutputLabelRenderer.java:241)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1431)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2778)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.access$500(RegionRenderer.java:49)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:574)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer$ChildEncoderCallback.processComponent(RegionRenderer.java:553)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXGroup.processFlattenedChildren(UIXGroup.java:96)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:160)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer._encodeChildren(RegionRenderer.java:270)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.encodeAll(RegionRenderer.java:201)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1431)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at oracle.adf.view.rich.component.fragment.UIXRegion.encodeEnd(UIXRegion.java:321)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2778)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2149)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer.access$500(PanelBoxRenderer.java:39)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer$ChildEncoderCallback.processComponent(PanelBoxRenderer.java:2267)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelBoxRenderer$ChildEncoderCallback.processComponen
Ania.
Edited by: user12869467 on Apr 12, 2013 1:57 PM

I did more trial/error with this problem. It is not related to AdfUtil.showMessageDialog().
My java-built table, shows a popup. After the popup is dismissed, I will get this exception, not right away though. The view has tabs, if after dismissing the dialog, I navigate to some other tab, and then back to the one which has the table, that is when the error shows up.
ANY help on how to diagnose this problem will be very much appreciated!
Ania.

Error in Self Service

Hi,
Dear All I am getting following error in Employee self service while clicking on Personal Information, Education and qualification, SIT etc...
Some functions are working properly...
WF_PLSQL_ERROR (ERRNAME=null) (ERRMESSAGE=null) (ERRSTACK= Wf_Item.Create_Item(HRSSA, 477, HR_PERSONAL_INFO_JSP_PRC) Wf_Engine.CreateProcess(HRSSA, 477, HR_PERSONAL_INFO_JSP_PRC))
Regards,
Jithin

Hey, which tablespace. what is the solution?
Please explain, i am getting the same error?

DNSService error and self expanding console.log file

Just like misskool, I had a problem with self-expanding console.log files. As suggested by roam, I erased the com.apple.iTunes.plist file to fix the issue. Unfortunately, 2 days after, the same problem started again. I noticed it happened soon after I tried (without success) to establish a mac OS 10.3.9 to mac OS 10.4.9 wireless network - either that or the re-activation of AppleTalk on my iBook. The error message in the console.log file is a repeated one-liner :
DNSServiceProcessResult() returned an error! -65537
The original advice from roam worked until I tried to network my two macs. In his idea, iTunes was the probable origin of the problem. Is it ?

The mDNS error message was associated with an iTunes update, though that is not to say it is caused by iTunes though it may well have. The error is from the mDNS service, a system wide network service, which looks for available services on the network.
I don't know what is causing this error but it has been known about since 2005, evidenced by this thread. It is a highly technical discussion,
http://lists.apple.com/archives/Bonjour-dev/2005/Jul/msg00023.html
which talks about the error occurring when two ethernet interfaces are active, but does not err when only with one. It is possible this observation is linked to your experience trying to network two Macs.
Click on the Next Threads on that page to read more.
Another thing to note is that the error code given is general and undescriptive, where one poster writes " Normally when you see that error it means that mDNSResponder (mdnsd) crashed." ... but there is no specific meaning given to the error code as to why it did.
So it's a bug but I cannot explain why it occurs or what role the iTunes update played in bringing it to the fore.
If it continues to be a problem with the same error message printing in the console, open Activity Monitor and mDNS should be active there and kill that mDNS Process.
As i have no iTunes updated, and do not want to try and create this error, I'll leave it up to you to try and determine some causes and effects regarding the renegade process of mDNS.

Various errors on self-monitoring (non-Prod) evironment

Hi all, i do have few issues that i see on the app srv log for PPM, any idea whats causing this errors:
- Component Performance metric calculations may be inaccurate or incomplete (usually getting this)
- Errors in AppServ log "Communication to Monitor Servlet failed" (always)
- Component objects not fully cached (rarely)
- No Component PeopleCode trace information (always)
I do get data populated in current and history tbls for PPM.
thanks

thx for the reply Nicolas
answers to your questions;
Peopletools version, ;8.48
database used (with version), Oracle 9i
OS (with version) :GENERIC (All Platforms)
what configuration setting has been done or not: its a self monitoring PPM setup
proper extract from your appserver/webserver log would be useful: im working on getting that from the customer
let me know your thoughts...

Error in Self-Diagnosis

Similar Messages

Maybe you are looking for