Error in sender communication channel

Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
Kishore

K.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore

Similar Messages

  • BIC Module Error in Sender Communication channel for EDI to File scenario.

    Hi Experts,
    We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
    Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
    Thanks & Regards,
    Abhishek

    Hi Abhishek,
    Is there any special character present in the EDI file?
    the parser is not able to parse the data.
    you can check the BIC conversion log for more information.
    Regards,
    Harish

  • SOAP to RFC Scenario - Error at Sender Communication channel !!

    Hi Experts ,
    I am trying to execute a SOAP to RFC scenario . At SOAP sender channel level I am getting the error in RWB .
    My findings :-
    1. Error at RWB  9/24/09 4:24:10 PM   error occured
                             9/24/09 4:24:06 PM   request received
    2. At SOAP UI client tool :
       <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>Server Error</faultstring>
             <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                   <context>XIAdapter</context>
                   <code>ADAPTER.JAVA_EXCEPTION</code>
                   <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:UPDATE:HTTP status code401 Unauthorized
         at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
         at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
         at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:917)
         at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:207)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</text>
                </s:SystemError>
             </detail>
          </SOAP:Fault>
       </SOAP:Body>
    </SOAP:Envelope>
    3.  At SOAP UI level - "requires authentication with the realm 'XISOAPApps'"
    1. I don't see any issue in authorization as i am having SAP_ALL .
    2. URL string seems to be O.K :
        http://ABC:50000//XISOAPAdapter/MessageServlet?channel=:BSer_SOAP:CC_SOAP_Sender&version=3.0&Sender.Service=BSer_SOAP&Interface=urn:ABC.com:%5EMI_CustomerInfo
    Kindly advice !!!
    Regards ,

    1. Check PI id and password is working fine.
    Check if the user you are using has SAP_XI_APPL_SERV_USER role.
    Another way is to pass id and pwd in URL
    Try to pass the User ID and Password in the URL( the URL which is given to the webservice).
    Example: http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel &sap-user=xxxx&sap-password=xxxx
    2.Provide SOAP URL like -
    http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel

  • Sender Communication Channel Monitoring Error

    Hi....Experts,
    i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
    Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
    pls suggest me how can i rectify these errors..
    for helpful answers i will give points*********
    regards,
    Pasi.
    Edited by: pasi s on May 5, 2008 8:35 AM
    Edited by: pasi s on May 5, 2008 8:40 AM

    Hi Pasi,
       Check if you are using the same business service (under which u have created the Channels) at  sender side in configuration.
    You have to use the same business serivce for sender under which your communication channels are created...................
    Or
    Create a sender communication channel in the service that u have used at sender side.............
    So i think in your case there is a mismatch of using the diff sender service at diff stages.............
    Hope this will solve your problem
    Thanks
    Sai     
    PS: kindly reward points if helpful

  • Sender Communication Channel Error

    Hi all,
    iam working on JDBC scenario.For this iam using party and business service.
    iam getting following error at jdbc sender communication channel.
    Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
    Erlier it worked fine.But now iam getting this problem.
    We are having some other channels which r working fine.
    any ideas......?
    Thanks,
    Sreedhar Goud.

    1. If you know the user, who having admin rights;
    1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
    2. Click on "New" button ( this is on Logon Dialog box)
    3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
    4. Say "Next"
    5. Enter "User Name","Host" and "Port" and Save the data.
    6. Select User and click on "Connect"
    2. Did you forget the J2EE_ADMIN password? Just follow below steps:
    Just follow below steps:
    1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
    Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
    2. "Switch to configuration mode" for that Click on "Pencil" icon;
    3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
    4. cluster_data --> server --> cfg --> services -->
    click on "Propertysheet com.sap.security.core.ume.service
    select properties:
    ume.superadmin.activated = True
    ume.superadmin.password = <enter password >
    then say "OK"
    Click on "Pencial ICON.
    5. Save & restart Java Engine.
    Login with "Administrator"
    1. http://<host>:<Port>/useradmin/index.jsp
    2. Enter userid / Password as "Administrator / <password>
    3. it will ask change password just change it.
    Please follow steps one by one. it should resolve your issue.

  • Sender communication channel stopped after error "Connection Timed Out"

    Hi experts,
    in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
    Yesterday evening a "Connection Timed Out" error came.
    After this error the polling stopped but channel in communication channel monitoring still remains green.
    So status green but no polling.
    To solve this problem we stopped and then restarted channel from CC monitoring.
    The channel is configured "manually".
    The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
    After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
    Thanks
    Fabio Boni

    HI,
    I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
    Thanks
    Fabio

  • Adapter Module not working in Sender Communication Channel working in recie

    Hi
    I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
    Thanks & Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B
    Message was edited by:
            RaviShankar B
    Message was edited by:
            RaviShankar B

    hi
    if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
    OUTBOUND is for sender
    INBOUND is for reciever right.?
    the following code i have written
    public ModuleData process(
              ModuleContext moduleContext,
              ModuleData inputModuleData)
              throws ModuleException {
              String SIGNATURE =
                   "process(ModuleContext moduleContext, ModuleData inputModuleData)";
              Object obj = null;
              Message msg = null;
              String filename = null;
              AuditMessageKey amk = null;
              try {
                   obj = inputModuleData.getPrincipalData();
                   msg = (Message) obj;
                   System.out.println("&&&&&&&&&&&&&&&&&" + msg);
                   if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
                        amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
                        Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
                   }else{
                        File filename1 = new File("
    10.7.1.43
    XI
    source","text.txt");
                        filename1.createNewFile();
                        amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
                        Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
                   System.out.println("**************" + amk + "***********");
              } catch (Exception e) {
                   Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
                   e.printStackTrace(System.err);
                   ModuleException me = new ModuleException(e);
                   throw me;
              // Read the channel ID, channel and the module configuration
              try {
                   Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
                   if(mp != null){
                        filename = (String)mp.get("FileName");
                        Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>>  Element Name is set to {0}"+filename );
                   }else{               
                        Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
                        filename = "FileName";
              } catch (Exception e) {
                   e.printStackTrace(System.err);
                   Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
                   ModuleException me = new ModuleException(e);
                   throw me;
              try {
                   XMLPayload xmlpayload = msg.getDocument();
                   DocumentBuilderFactory factory;
                   factory = DocumentBuilderFactory.newInstance();
                   DocumentBuilder builder = factory.newDocumentBuilder();
                   Document document =
                        builder.parse((InputStream) xmlpayload.getInputStream());
                   Element rootNode = document.getDocumentElement();
                   if (rootNode != null) {
                        Element childElement = document.createElement("filename");
                        childElement.appendChild(document.createTextNode(filename));
                        rootNode.appendChild(childElement);
                   // Transforming the DOM object to Stream object.
                   TransformerFactory tfactory = TransformerFactory.newInstance();
                   Transformer transformer = tfactory.newTransformer();
                   Source src = new DOMSource(document);
                   ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
                   Result dest = new StreamResult(myBytes);
                   transformer.transform(src, dest);
                   byte[] docContent = myBytes.toByteArray();
                   if (docContent != null) {
                        xmlpayload.setContent(docContent);
                        inputModuleData.setPrincipalData(msg);
              } catch (Exception e) {
                   e.printStackTrace(System.err);
                   Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
                   ModuleException me = new ModuleException(e);
                   throw me;
              return inputModuleData;
    Best Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B
    Message was edited by:
            RaviShankar B

  • JMS Sender Communication  Channel problem

    Hi XI gurus!!
    I have a JMS Sender Communication Channel that cannot get information from JMS TIBCO queue.
    In defaultTrace.XX.trc I see the following information and errors:
    #1.#00144F249F1500C70000087D00002D8300044A22A193A198#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
    #1.#00144F249F1500C70000087E00002D8300044A22A193A201#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
    #1.#00144F249F1500C70000087F00002D8300044A22A193A552#1207412506993#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueSession qsess=198151 qconn=45502 tran=true ackmode=1#
    #1.#00144F249F1500C70000088000002D8300044A22A193A670#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Info##Java###Sucessfully created session {0} for profile {1}#2#com.tibco.tibjms.TibjmsQueueSession@3a5f233#
    {GenericConnectionProfileImpl
    {Description=ConnectionProfile of channel: JMS_Sender_loginCheckReq_001on node: 21291150 having object id: 7e7ee107bc2031d2bc79fa2fce15bbed,
    JmsMessageSelector=,
    ConnectionFactoryConstructor=null,
    ConnectionFactoryFactoryInvocation=null,
    ConnectionFactoryInvocations=[],
    DestinationConstructor=
    {ConstructorInvocation
    {className=null,
    invokeParams=[]
    DestinationInvocations=[],
    MessageInvocations=[],
    DestinationName=null,
    User=,
    Password=,
    isJmsSessionTransacted=true,
    InitialContextEnvironment={java.naming.provider.url=190.10.0.133:9222, java.naming.factory.initial=com.tibco.tibjms.naming.TibjmsInitialContextFactory},
    LookupConnectionFactory=QueueConnectionFactory,
    LookupDestination=GALP.PRD.TIGERC.LOGIN.REQ,
    SerializedConnectionFactoryPath=null,
    SerializedDestinationPath=null,
    Flags=0000000000000000000000000000000000000000000000000000100000000010
    #1.#00144F249F1500C70000088100002D8300044A22A193A7EE#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
    #1.#00144F249F1500C70000088200002D8300044A22A193A85F#1207412506994#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
    #1.#00144F249F1500C70000088300002D8300044A22A193B153#1207412506997#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueConnection qconn=45503 qconfac=QueueConnectionFactory[url=tcp://190.10.0.133:9222;clientID=null;Properties={}] user=null#
    #1.#00144F249F1500C70000088400002D8300044A22A193E3CF#1207412507009#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
    #1.#00144F249F1500C70000088500002D8300044A22A193E571#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
    #1.#00144F249F1500C70000088600002D8300044A22A193E64B#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
    #1.#00144F249F1500C70000088700002D8300044A22A193E714#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageProducers()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
    #1.#00144F249F1508770000000000002D8300044A22A83A6308#1207412618584#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: received msg from daemon conn=45502 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
    #1.#00144F249F1508770000000100002D8300044A22A83A650C#1207412618585#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: post msg to session sess=198151 cons=261547 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
    In the last two lines we can see that SAP XI do a connection to TIBCO and is getting an unknown error, even in debug (note 856346) I cannot get any information.
    Actually we are running SAP XI 3.0 SP21, but this was working fine in SAP XI 3.0 SP17. We have more than 100 Communication Channels working fine and only is having this strange behavior.
    BTW if we put manually information in TIBCO QUEUE it works fine, but automatically doesn't pick the message.
    Thanks

    HI,
    As per the trace details given please consider few of the below options....
    What do u see in adapter monitoring tool for JMS adapter?
    http://hostname:5XX00/mdt/amtServlet
    Did you follow the document on correlation of JMS messages?
    In communication channel You have to set
    Correlation ID -> XI conversationID
    XI message ID->GUID
    XI Conversation ID -> JMS correlation ID.
    Now in the custom J2EE application you should set
    jmscorrelationid of message before sending in to queue to jms correlation id of message before receiving from the queue.
    This thread deals with the issue..
    JMS Queue monitoring
    Check  if the JMS Sender adapter EOIO is with serialized messages 
    Thanks
    Swarup

  • JMS sender communication channel content conversion

    Hi,
    I struck with the content conversion in the JMS Sender communication channel.
    I have configured the communication channel with the filed fixed lengths. (Simple type)
    The field fixed lengths i have given are 10,2,3,11
    The contents in the file 1000000072  230 111
    but, in the input xml after conversion iam getting 100000007 in the first field and 2 in the second field 23 in the third field.
    I have configured the sender communication channel as in the document in SDN.
    Even, i configured several communication channels. I didn't get this strange error any time.
    I have gone through SDN to fix this issue, but i didn't get solution.
    If anyone got rectified this kind of error, please answer your solution to me
    Thanking you,
    Regards,
    Krishnaraju.

    Hi,
    Thanks for all your support. The issue got resolved.
    The issue is due to the file, In the file the special characters are appearing. We are not able to see these characters in the notepad, wordpad, text editor.
    But, these characters are appearing in th syn text editor. So, we removed those characters and processessed the file. Now, it is successfull.
    Regards,
    Krishnaraju.

  • JDBC Sender Communication Channel Problem

    Hello everybody,
    I have a sender communication channel, it is with green Functioning status in channel monitor in runtime workbench, and the log says "Process started" for every pool as configured, but it doesn't return any data to XI, and there's data to be taken, the problem started a few hours cause it was working fine, I've already executed a Complete refresh cache in SXI_CACHE, and changed the channel from Active to Inactive in ID, and Stopped and Started it again in RW, it doesn't give any errors, but it doesn't bring back any data that should be, any suggestions or maybe any information on how to refresh totally those channels????, thanks in advance.
    Regard's
    Paul

    Hi Paul
    Check for JDBC adapter locks. cpa cache locks are not relevant to your problem.
    Moreover check with the visual admin logs as well. if you can get info about the issue you have
    Thanks
    Gaurav

  • Regd Sender  Communication channel

    Hi all,
    I have configured a sender communication channel for picking a file. Everything looks fine to me, but the file is not getting picked up.
    I checked in RWB for channel, channel is configured fine.its says  processing started, and processing finished successfully.No message ID is showing.But the file is not getting picked from the location.
    In moni , no messages to display.
    can you suggest how to trace out the possible error? the path and file names are perfect, check it number of times.

    Hi Anika,
    in sender file comm channel, set the processing mode to delete and activate it.............
    then in source file system, ask the file system guys to check the file permissions of the source file........it should have read, write, execute for others............
    then your source file should be picked.........if still your source file is not getting picked, then ask your basis guys to do a full CPACache refresh using PIDIRUSER and then re-run your scenario......
    Regards,
    Rajeev Gupta

  • PI sender communication channel not reading files from NFS directory

    Hello,
    I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
    Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
    Any suggestions?
    Thanks,
    Sangita

    Hello Sangita,
    Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    You can use NFS protocol when you have a local directory in XI server.
    Best Regards,
    .Luis Bernal.

  • NegativeArraySizeException in Sender Communication Channel

    Hello PI world
    I have an error in a communication channel that I don't understand :
    The interface is a simple mapping from a FTP server to a SAP IDoc.
    The files are archived in the SAP PI server using the CC configuration :
    CC Type : File FTP Sender (SAP BASIS 7.11)
    Processing Mode : Archive
    Archive Directory : /[directory on our file system]
    Archive is not on the FTP Server but in our file system.
    This configuration is working with a local FTP server and a distant FTP server that we have.
    But it's not working with a distant FTP on a AS400 system (where I have no admin access).
    The processing "Delete" is ok, but with the configuration above, we have this error in the communication channel :
    Could not process due to error: java.lang.NegativeArraySizeException
    Is this an error from SAP PI system or a mistake in the distant FTP server configuration (AS400).
    I didn't find any similar problem in SDN.
    Thanks for your help.
    Jeremy.

    Hello there,
    we face the exact same problem on SAP PI 7.11 SP 4.
    XIAF is on 1000.7.11.4.4.20100106234100
    Is there any solution on this for PI 7.11?
    Note 1297495 is not for 7.11.
    Note 893762 is not for 7.11.
    SAPXIAF04 patch #6 does not show me (at least not in SWDC) any solution to this problem. Or is there with a later patch?
    Thanks a lot,
    Matthias

  • Sender communication channel with file adapter

    Hi All,
               Here i am facing some error with the communication channel in which i have used FILE adapter. Here i am using PI 7.0. Here i have configured the communication channel. but i didn't checked the "operating system commands". and i checked the " adapter specific message attributes". i dont know whether i have to check these adapter specific message attributes or not. When i have gone to runtime work bench there i saw in adapter monitoring. there it is not showing any error. but in communication channel monitoring it is showing that it is having  -
      "processing  errors" but i am not getting where will be the error.. Any new ideas will be appreciated.
    Thanks in advance,
    Ramana

    Hi Bhavesh and Aaron,
                  Here i viewed the XMl format of the sender file in the mapping. there i found the difference between the file i am trying to pick up by the adapter and the XML instance of the sender interface in mapping. The difference is there in the message type of the <ns0> tag the file i am trying to send is having one message type and name space, where as the XMl instance is having the other message type and same name space.
                 i think that will the problem in processing my file. i am not sure about it.please any of you confirm that if it is th processing error i am facing or not.
                Thanks for your efforts.
    Regards,
    Ramana.

  • FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE

    Hi,
    I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct.
    I have also checked file and directory permission (chmod 777)
    Poll interval is 600 secs.
    There is no error in communication channel monitor  (returned log: CC is correctly configured and started).
    Process started every poll interval, but no file is picked up.
    Why?
    Carme

    Hi,
    What type of file are you processing. Check whether the file type is binary or text mode.
    Also check whether the file name you have specified in the CC and the exact file in the directory are the same.
    Also check the file processing mode, whether it is read only, delete or in test mode.
    If the file is in read only mode when the file first processed, then once the file was processed it would be in read only mode, so if you place the new file it should process, so try deleting the existing file in the directory and place a new file with exact file name along with the correct extension and try to process it.
    Also I would suggest you check the exact file extension, by unchecking the radio button in the folder option under the menu tools> Folder options> view-->hide extension for file type.
    Regards,
    Nithiyanandam

Maybe you are looking for