Error in sender sap idoc side
Hi Experts,
1, When the sender post idoc to PI it shows the following
error in sender sap system.
Error:No service for system SAPQ01 client 118 in integration directory
2, Is it possible to post the idoc to PI With out activating the integ directory Object in PI(Integ.repoistery activated).
3, If possible, where can i see the idoc datas in PI before activation.
Thanks
Hi Raja,
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.
Similar Messages
-
Error to send a IDOC from ECC to SUS
Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
ErikHI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM -
Error during sending sales idoc
hi all,
i m getting error during sending idoc for sales.................
Error:Check value field assignment for Condition PN10.....
How to solve this...?
Regards,
Imranfriends.......argent.......
-
System Error while sending the IDOC to Broker
Dear Gurus ,
Due to system eroor - tRFC are failed . To reprocess failed tRFC I am using RSARFCEX and scheduling the program as job with the frequency of every 5 min. It does delete the entry from SM58 and shows like it has been processed . But when i checked with the Broker It is not . But when i execute the same program manually ( SE38) . It works perfectly fine . Any input is welcome .
I have gone though many forum for the same issue some of them suggesting to The automatic resend is configured under SM59 by making changes to your RFC destination. The RFC Destination can be assigned tRFC parameters consisting of three values. (This is done through the tRFC Options selection in the Destination menu under sm59.) These options are:
a.Suppress background job if connection error
If this flag is set to X and a connection error occurs there is no automatic resubmittal of the transaction to the external application. If it is not set, jobs are automatically created according to the following two parameters.
But i am not convinced as this looks like that it is related to communication error . but in my case it is system error .
Would be great If anybody can suggest whether above option is mandatory for any tRFC failure or not ?
Regards
SameerHi Hetal ,
Thanks for asking . Yes As far system permission is concerned that is fine . As mentioned it works fine with manual process but It does not work when job is scheduled . But at the same time there is no error tracked in SAP .
REgards
Sameer -
Error when sending INVOICE01 iDoc to SAP R/3 system
Hi,
I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set". Could someone help me how to resolve this error?
Thanks,
TrifireSLG1 or IDOC in idoc status WEDI
-
ALE Error while sending PO IDOC through EDI
Hi Experts,
I am sending one PO IDOC through EDI but I am getting the following error:-
Message no. B1130.
"Too many recipients found for message type ORDERS in the ALE model"
How can I solve this error ? Please guide me in this regards as this is an
important issue with urgency.
Thanks & Regards
Jitendra GujarathiPlease check this discussion thread
Re: Too many recipients found for message type in the ALE model -
Mapping Error with Sender JDBC- Idoc scenario
Hi Guru's,
I've got a simple asyncronous sender JDBC to Idoc scenario, and I encounter a strange problem with the mapping.
When I test the mapping it works fine, but when I run the scenario, only the first element (a constant) of the Idoc gets mapped, and mapping stops with no errors.
Does someone know where to find the error?
Thanks,
KarstHi Karst,
There might be several reasons that you do not see the IDOC structures are not created/mapped:
1. Most of the IDOC structures are optional (minOccrs = 0), so you have to make sure the structure itself (not just the fields within that structure) is mapped to something that does exist in the source data.
2. Make sure your JDBC generated source data does have the right namespace as you used in your mapping. I once had a similar problem, but finally found the source data generated in run time is slightly different from the one used in mapping in terms of namespace.
3. Test your mapping with the source data generated in runtime (you can copy it from SXMB_MONI). Then you may be able to find the problem.
Hope this helps.
Hart -
SM58 - Error while sending IDOC
Hi,
I got the following error while sending the IDoc to a XI system.
"No service for system (Idoc adapter port), client 800 in Integration Directory"
Please let me know whether this is due to an error in network or application error.
Note: remote logon is not successful in the XI system
Thanks in advance
Edited by: RPN on Jul 1, 2008 11:46 AMHi RPN,
Plz do check the following things :
1. Verify the logical business system in SLD.
To verify --- Go to SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client you used as Business system --> Here look for the logical system is defined or not.
2. Open ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System.
3. Refresh the full CPA Cache (userid must be XIDIRUSER/PIDIRUSER)
http://<hostname>:50000/CPACache/refresh?mode=full
Regards,
Vinod. -
Hi,
i am working with the Scenario IDOC to IDOC using middleware PI.
Done with Whole Process .
But when i Sending an IDOC through WE19 it went Succesfully(i checked it in WE05).
But when i checked in SM58. then there is an error in sending my IDOC.
Transaction IDX1: Port SAPETS, client 800, RFC destination contain error.
Please let me know where might me the problem ??
Thanks
DeepthiHi,
Check the RFC destination connection from PI to ECC... looks like there is connection from PI to ECC to retrieve the metadata....
HTH
Rajesh -
Hi Gurus,
We are not being able to send Idocs from one of our Back-end SAP system. The Idoc status in we05 is successful but it doesn't reach XI. So we checked in SM58 in the Back-end R/3 system and there it shows the error:
No Service For System SAP*** , Client *** in Integration Directory
We tried almost every possible setup
-The System is defined in SLD and has the logical system name.
-The Adapter Specific Identifiers are correct for the corresponding business system in ID
-The RFC destination in R/3 system is defined.
- Read through other similar threads in SDN about the similar problem.
Do anyone have a more definite solution for this particular problem? The other R/3 systems are connected to XI system and all IDocs from those systems are arriving at XI.
Waiting for your valuable advices!
Regards,
SuddhaHi All,
We had eventually found the solution to this problem we were facing in sending IDoc, though I couldn't manage to update the thread with the solution. I think this would be a very helpful information for those who face similar problems.
Let me describe the scenario first briefly,
We are sending an IDoc (Idoc extension), from SAP system to XI and then send the XML payload as mail attachment to the receiver via receiver mail adapter. Since this is a cross company transaction, hence we have configured the scenario as a B2B in ID, which means we use Parties for both the sender and receiver.
Now in the ID we had done all necessary configurations and used parties and services under Party. For the sender SAP system we assigned a Business System to Sender Partner, configured the Party Alternative Identifiers correctly. The ports were created in IDX1.
On the other hand the SAP system was also configured successfully - including Partner Profile, Distribution List, RFC destinations and ports.
In SLD we created Business System for the SAP system and in ID the Business System under party had the correct logical system name as Adapter Specific Identifiers.
But after all these, the IDoc was not arriving at XI, though in R/3 the status of the IDoc was 03 in we02. When we checked in sm58 in R/3, it showed us the error message that "No Service For System SAP*** , Client *** in Integration Directory".
The cause to this problem was:
We created (assigned from SLD) Business System only under Party (Sender), as this was a B2B scenario, and didn't create (assign) a Business System without Party, as we didn't need one at all in the scenario configuration. And this the reason behind this error. When an Idoc arrives at XI, before the Inbound IDoc adapter converts the IDoc to IDoc XML using IDoc metadata............it checks in Configuarion to see if any Service without Party (Busniess System) is defined for the Sender SAP System and Client (The SNDPOR and MANDT field values from IDoc Control header are taken as the SAP SID and Client). If it finds one it accepts the IDoc and starts the Normalization (Sender Party, Service......in the message header) and IDoc to XML conversion. If it cannot find an Service without Party in ID for sender system, it rejects the Idoc with the error message that we saw in sm58 in backend R/3 system.
In this step the Service under Party doesn't help, because at this point the Inbound IDoc adapter can not deterimine the sender party.
Hence for sending an IDoc from an SAP system to XI, we need to have an Service Without Party in ID, whether or not we require it in our actual Scenario Configuration, which is ofcourse not a case for the Reverse Scenario, ie Sending an IDoc into SAP system from XI.
This is the similar with BC adapter as well. I was already aware about this behaviour of BC adapter from my past experience and this actually helped to troubleshoot this IDoc adapter problem.
This was ofcourse a useful and new learning for me and hope would be helpful to others as well. Let me know if anyone has any doubts on this.
Regards,
Suddha
Edited by: Suddhasatta Guha on Aug 28, 2008 1:03 PM -
Error in sending Idoc :: Urgent
HI
we are trying to send Idoc DELINS and ORDERS to SUS system. when sending the idoc the following error occurs in SUS
StandaredMessageFault
An error occured within XI interface: An exception with the type CX_GDT_CONVERSION occured but was neithered handled locally nor declared in a RAISING clause Program: SAPLBBP_BD_MAPPING_SAPXML1; Include : ; Line
How ever the same works fine in Dev and QAS servers
Regards,
AnandHi
<u>Please provide SRM-SUS and XI Version details.</u>
<b>Please go through the SAP OSS Notes, which will help -></b>
Note 782755 - Control indicator is not transferred from MM to SUS
<u>Related Notes</u>
Note 1062864 - Control indicator is not transferred from MM to SUS
Note 313925 - Example exit for EDI outbound processing (e.g. purchase order
<b>Other OSS Notes -></b>
Note 885825 XML inbound: Dump in QuoteItemReferenceVersionID
Note 825169 XML: Bid currency in bid invitation
Note 819953 SRM 4.0 of SAP XML output of partner address data
Note 723680 Corrections in the mapping of SAP XML messages
Note 723594 - SRM 4.0 XML confirmation mapping error
Do let me know.
Regards
- Atul -
IDOC Error - Copy Sender from Payload: Sender Is Missing in Payload
Hi,
I have following scenario.
SOAP adapter ---> PI -
> IDOC Receiver -
> ECC
THe IDOC has a required node that is disabled and IDOC revicer communication channel has checkd following options.
Apply control record value from pay load
Take Sender from Payload
The soap message is mapped to IDOC structure. While testing I received following error.
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy Sender from Payload: Sender Is Missing in Payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: Copy Sender from Payload: Sender Is Missing in Payload</SAP:Stack>
If you have seen similar error and please let me know how to trobleshoot. I appreciate your help.
Thank you,
BalajiThank you for the response. I can enable EDI_DC40 segment and map required following values.
· SNDPRN
· SNDPRT
· SNDPFC
· RCVPRN
· RCVPRT
However as we move transports to different environemnts the above values changes and I can't hard code in the mapping.
My questions is how can I map these values such that when transport moves across different environemtns the mapping valaues are still good. Please let me know.
Dont enable EDI_DC40 and dont select take sender ,receiver from pay load option,apply control record values from pay load.
this case IDoc adapter reads values from configuration time andno problem after trasporting to quality or prod.
Regards,
Raj -
Hello Rescue Team,
I am facing the following error :\
16.06.2014 23:22:42.164
Error
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.166
Error
MP: exception caught with cause com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Exception caught by adapter framework: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
and the payload transferred is as attached in the attachment below.
I have refered various blogs, however I am still not able to understand how to get the exact location of the error location..According to me, the value that is giving trouble is OTH in <BSARK> however I have checked the permitted values for BSARK on ECC and OTH is maintained.
Can you please help how I can resolve this error.
Thanks
SaurabhHi Guys,
This is solved..I corrected the date format of the ZZTIME segment from 1157 to 115700.
Thanks
Saurabh -
Idoc Missing On the ECC SAP System Side
Hi All
In my case an Idoc is being sent to the SAP ECC system from XI . I can see the message is successful in SXMB_MONI of XI, the message has a chequered flag , I also locate the IDOC in the IDX5 in the outbound entries . But I am not able to locate it WE02 Idoc List .
I have checked the SMq2 in both XI as well as ECC but the message is not being held here .
I checked SM58 on the XI side . It has no errors. On the ECC side i can see some entries . Now how do I locate which entry might be for my message . Is there a way to see the detailed error message for an entry in SM58 on the ECC side .
What else can be checked to locate the missing Idoc .
Thanks.
regards
NileshHi,
a workaround - just check the function module in ECC which is invoked for posting of your IDOC..........take the output IDOC msg data from XI from SXMB_MONI and execute your function module in ECC with that data and there you will find some exception msg........just try to match any exception with the SM58 errors...then you can locate your IDOC...........
just proces the SM58 entries and you will get your IDOC in ECC.
Regards,
Rajeev Gupta -
Xi sending the IDOC to R/3: Error
Hi
I am sending the idoc from XI, i am getting following error " <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>".
Kindly let me know have i done anything wrong in configuration in XI and r/3 for posting IDOC.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>MI_In_IDOCDebmas</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface MI_In_IDOCDebmas</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
did you import correct IDOC type in the Integration Repository?
do u have external definition created for mapping ? Check those all are correct?
Re-import the IDOC into the IntegratioN Repository and activate again..
Also make sure that you are using IDOC itself as an Message Interface during Interface Mapping. No need of creating new Message Interface for the IDOC.
I think you have done mistake in creating the Message Interface for the IDOC. It is not required Use the same IDOC itself
related tips:
File-IDOC, idoc interface error
Hope this helps,
rgds,
Moorthy
Message was edited by:
Krishna Moorthy P
Maybe you are looking for
-
KE30 Summary balance not matching with KE24 line item total
Hello Experts, My client's are having one KE30 report and there are about 15-18 rows in the output. About 12 rows agrees with the KE24 line item report and they inturn matches with FBL3N balance. However, the balance 3-6 rows does not agree with th
-
Acrobat Reader closes after opening PDF from an app-v
So we have a problem with reader version 10.1.0.534. In our company we have most applicaties packaged as an app-v take firefox as an example. Now when we try to open a pdf document from firefox Acrobat Reader opens for a second and then closes again
-
after trying 3 times i got the error code 50828284 what is my bios password? This question was solved. View Solution.
-
Problems with Powerbook and How to prepare it for Apple repair engineers?
What to do? I have a few issues with my last gen 17" Powerbook. From the start my display has been physically out of line by a millimetre or two, and also from the start, I have had a dip in the outer plastic where the CD drive is, in which revealing
-
When I try to sign into my iMessage account, it pops up 'could not sign in. Please check your network connection and try again'. I've checked my connection and it works perfectly. What can I do?