Error in sending HR Master data to CRM - PFAL error

HI expert ,
I am sending HR master data to CRM system through PFAL transation. I am using HRMD_ABA message type to send the data.
While executing i am getting the error like this " Internal error: Program read table idoc_structure,
command data_select_for_block, argument Z1P0002 " . I have a custom segment ZIp0002 for ci_p0002 . Can you please suggest any solution to solve this.
with regards
RKM

Hi,
An extension of an infotype should be created in segment Z1Pxxxx where all fields of E1Pxxxx and the additional fields should be inserted. The entry in T777D should have Z1Pxxxx for field Idoc segment as described in note 105148.
Please, check also note 165699.
As of Release 4.6: In the customer enhancement RHALE001, fill the function exit EXIT_SAPLRHA0_004 with the line
F_idoc_control-cimtyp = 'ZRMD_AXX'.
Where ZRMD_AXX is the enhancement/extension you created.
Regards,
Ana

Similar Messages

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Creation of Tech Master data with CRM IC Web Client

Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
Sagar

Hi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes

Transfer of Business Partner Master data from CRM to TIBCO.

Hi All,
We intend to integrate CRM4.0 with TIBCO for transfer of Business Partner Master data from CRM to TIBCO.
Can anyone provide solution for the same. One of the think is through XI.Please correct if it is the right way to do it?.
Also, would appreciate if someone can provide documentation or links for integration.
Regards,
Mehul Shah.

Hi Rahul,
Yes you can integrate CRM and TIBCO using XI.
Check the below links
transfer the Business Partners from the CRM system to XI and to MDM.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797
any XI content delivered by SAP can be found in the SAP service marketplace which you can enter http://www.sap.com/services/bysubject/servsuptech/index.epx.
a) After you entered the service marketplace go to Software Download under the header SAP Support Portal.
b) Next navigate to Download -> Support Packages and Patches -> Entry by Application Group
c) In the main window select SAP Content and then Process Integration Content (XI Content).
d) Now you should see a list of XI content packages.
The package containing XI content for CRM is
XI CONTENT BBPCRM
In addition you find some packages that offer mappings from CRM interfaces to industry standards like RosettaNet or STAR standard, like
XI CONTENT ROSETTANET CRM
XI CONTENT STAR CRM
Some of these packages may require a license, therefore I am not sure if they are visible to you.
As per my knowledge, XI has CRM pre-delivered content and usually it communicates thru Proxies,Http, RFCs..
And in your scenario , you can always go for Proxy communication
Have a look into these threads
CRM and SAP XI
SAP CRM integration with XI
How to access the pre-delivered XI Integration Content for APO ,SCM or CRM
Dont forget to Reward points if this helps
Regards
Pragathi.

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

How to send User Master Data through XI

Dear SAP gurus,
We are currently configuring the e-recruiting module on a separate server than HR (following the SAP standard).
As our CUA is not connected to the E-REC systems, we are looking for a way to send properly the User Master Data from HR systems. We have seen that the report RSCUSND enable us to send iDoc with message type USERCLONE, but this repport can be only run from the CUA then we can t use it.
Another solution is to make a client copy with the profile SAP_USER, but we can t use this solution because in order to get the User Master Data in a real time we should make the copy each 15 minutes.
We can t figure out with the question, what is the standard way to send User Master Data to our E-Recruiting module
Regards
Hadrien

HR side:
1-Below t-code is what you should go through:
SM59
BD64
WE20
WE21
2-The key interface object is as below(I used it in LSMW, XI should be the same):
Business Object      HRMASTER
Method               SAVEREPLICAMULTIPLE
Message Type         HRMASTER
Basic Type           HRMASTER02
XI side:
1- The XI has the HR interface package in IR. You just need to select those you need.
2-Goto ID and do interface mapping between IDOC interface & XI outbound interface
All above is the skeleton processes. U can consult with XI consultant in details.
Hope helpful..

Data error when loading to master data?

Hi,
I am loading data from Data base to BW.It is a master data loading.I got an error in the 8th package of the load for the time field which is server update time(reference 0TIME) .The data server update time for that particular record is '19900101'.I am really confused what is the error with this kind of data?
Here is error message:
0TIME: Data record 1797 ('3YV4C0EJBWTGO1CA'): Version '199001' is not valid
Message no. RSDMD194
Diagnosis
Data record 2. with the key '3.' is invalid in value '4.' of the attribute/characteristic 1..
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me to resolve this also explain what is the differnce in this kind of data?
Thanks,
Vasu

right click on the master data --> delete master date, BUT you will only be able to delete master data not used in a cube (you'll get a pop up to confirm this)...if you want to delete master data already used in a cube, you need to delete the contents of this cube first (and any other cube where this master data is used)...only then you can completely delete the master data entries
M.

ALE distribution of HR master data to CRM - subtype CELL and MAIL

Hello,
Overview/Introduction:
we are using the ALE distribution of HR master data to CRM. The distribution has already been set up and it is running. We know that the infotype communication (0105) is especially distributing the subtypes 0010 (e-Mail) and 0020 (telephone number). This e-Mail address and the telephone number are stored in the business partner in the CRM system.
For this infotype 0105 there are also the subtypes CELL (cell phone) and MAIL (e-Mail address). Unfortunately this cell phone number and the mail address (from subtype MAIL) are not stored at the business partner in CRM.
Our request is on the one hand to store the data from subtype CELL into the field mobile number of the business partner. And on the other hand we want to store the e-mail address of subtype MAIL at the business partner instead of subtype 0010.
For some reason it seems that these requests canu2019t be setup within SAP standard.
So we found SAP note 758426 which suggests to use the BAdI HRALEX_INBOUND and the report RH_ENHANCE_BP_TEMPLATE.
Problem:
Now the problem is that the BAdI does not get called! The BAdI is active! We tried to set break points -> unfortunately did not stop! And we also implemented an endless loop in the BAdI -> even with this the system did not u2018stopu2019!?
Any ideas?
Thank you,
Roman

Hi,
First you need to create a distribution model using transaction BD64 : Edit > Model View > create.
Then you will need to maintain fields for description and technical name. In partner box you need to enter the source system (HR) and the target system (FI) in the second field. Then you need to assign a message type and filter settings if you need it. You need to create this distribution model in source system (HR).
After, still in BD64, go to environment > change partner profile or transaction WE20
Select your target system and enter the corresponding message type ( HRMD_A or HRMD_ABA depends on your scenario) with the correct customizing (receiver port, packet size, idoc type, syntax check and output mode).
Then please do the same things in your source system using WE20 for your source system and define your inbound parameters (Process code HRMD, processing by function module : use trigger immediately if it is not a production system or else trigger by background program and this case you will need to run report RBDAPP01 to process Idocs).
Once done, then go back to your model view in your source system (BD64) and go to Environment > generate partner profiles. Then please go to Edit > Model View > distribute
After all these settings done, it should work.
Please also check out documentation :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/82/933b90aa9e11d6b28800508b5d5211/frameset.htm
Best Regards
Christine

Technical Master data replication CRM to ISU

Dear Experts,
This is regarding the replication of TECHNICAL MASTER data from CRM to ISU. I have done all the required setting and the data is replicating to ISU as well except PoD.Unable to replicate POd.Can any one suggest on this
Also while creating Service Contract in CRM every time system ask to "identify the Premise " which is not possible as i am unable to find Premise details in CRM.
Has any one faced such issue.
Regards
Hrishi
Moderator note - thread locked, no research, generic question

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Datasource for Master Data in CRM

Hi CRM Gurus,
I am working in a CRM-BW integration project. I wanted to know the list of relevant Datasources for Master data in CRM side for which i have to load data in BW side for the Opportunity Cube and Activity Cube.
Also want the list of Datasources for Master Data for Business Partner and Product in CRM system and the relevant Infoobjects(Master Data) in BW side.
Full points will be awarded. Eagerly Awaiting for your help.
Regards
Vishwanath

Hi,
The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
These are indicative. Do a proper business blueprinting for all your needs.

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Error in sending HR Master data to CRM - PFAL error

Similar Messages

Maybe you are looking for