Error: in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked. Continue with thread [send mail through dynamic actions|send mail through dynamic actions].
Edited by: Vinod Kumar on Sep 5, 2011 10:19 AM

this is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file.

Similar Messages

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Error while sending mail through SMTP

Hi,
We are getting the following error while trying to send mail through SMTP.
'554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
Please advice,
Regards,
Sam

Hi All,
Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.
afgdev:pgdadm> telnet afgdev 2500
Trying...
Connected to afgdev.
Escape character is '^]'.
220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready
helo afgdev
250 afgdev.abc.ae
mail from:<[email protected]>
250 Ok
rcpt to:<[email protected]>
250 Ok
data
354 Enter mail, end with "."
Hello,This is a test.
Connection closed.
afgdev:pgdadm>
rgds
Sam

Send mail through dynamic action, but the subject line and content is blank

Hi all,
I'm facing one problem on sending mail throught dynamic action.
Whenever a new employee is hired, the system will trigger a mail to the administrator.
The mail can successfully reach the email address. But the title and the content of the mail are missing. I can receive an email with a PDF attchment. But when I open this PDF file, it's blank inside.
In t-code "SO10", I created a new mail text with name of Z_MAIL, for my mail, insteading of using the SAP standard one.
When I using the SAP standard mail text, it works and I can see the content. But even I copy and paste the exact the content of the standard one to my own new mail text, it will not work.
And I have to use my own customized mail text. So, is there any one knows about this issue? Any more setting I should do? Or is there some tricks?

Hi,
   I feel that something will be misiing in the coding.Even i faced the same problem earlier.for me it was text file as an attachment ,file was receiving but no data...the problem was i forget to add one option in objpack-head.
   R u using the FM - SO_NEW_DOCUMENT_ATT_SEND_API1??
If so pls C the below codes for text file as an attachment.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1   OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1   OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1   OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
Creating the document to be sent
doc_chng-obj_name = 'MESSAGE'.
doc_chng-obj_descr = 'ZHRI_GARN_EPC_COMM'.
objtxt = 'Program ZHRI_GARN_EPC_COMM has been executed successfully'.
APPEND objtxt.
objtxt = 'Error records passed to BDC session XPHRGARN01'.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
Creating the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
Entering names in the distribution list
LOOP AT se_tech.
    reclist-receiver = se_tech-low.
    reclist-rec_type = 'U'.
    APPEND reclist.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = objpack
      object_header              = objhead
      contents_bin               = objbin
      contents_txt               = objtxt
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
Hope this will help u.
Regards,
Manoj.

How to send an mail through dynamics actions

Hi Friends ,
To call subroutine in dynamics actions for sending an mail . When any actions is run (eg : promotion is done ), call subroutine and send an mail . Can this tasks can be done .
Thanks ,
Anish
Moderator message : Duplicate post locked. Warning : Non-adherence of forum rules will lead to deletion of user-id.
Edited by: Vinod Kumar on Sep 8, 2011 10:44 AM

Hi Anish,
If you want run sub after some action it is possible. Like after selection some rb or your validation is right. It is possible.
Regards,
Madhu.

Error in sending mails through Broadcasting wizard

Hi Friends,
I am trying to broadcast a report through broadcasting wizard via Email to ussers's personal mail IDs. But I am not able to successfully send the mail ..In Transaction SCOT I monitored and found that <b>SO_OBJECT_MIME_GET Exception 2</b> is coming . Could some one please tell me why this error is coming and whats the possible solution.
Thanks
Anurag

Hi Anurag,
try setting up the default domain in transaction SCOT.
SCOT --> Settings --> Default Domain
i think this should solve the problem..
if still no..Please refer to OSS notes: 671260, 487754, 806169
Do assign points if useful.
Regards,
Dhanya.

Getting error while sending mail through javamail api

I can able to compile the following code successfully but while executing it showing the error
C:\Program Files\Java\javamail-1.4\demo>java msgsend -o [email protected] -M 203.112.158.188 [email protected]
Exception in thread "main" java.lang.NoClassDefFoundError: msgsend
import java.io.*;
import java.net.InetAddress;
import java.util.Properties;
import java.util.Date;
import javax.mail.*;
import javax.mail.internet.*;
public class msgsend {
public static void main(String[] argv) {
     String to, subject = null, from = null,
          cc = null, bcc = null, url = null;
     String mailhost = "null";
     String mailer = "msgsend";
     String file = null;
     String protocol = null, host = null, user = null, password = null;
     String record = null;     // name of folder in which to record mail
     boolean debug = false;
     BufferedReader in =
               new BufferedReader(new InputStreamReader(System.in));
     int optind;
     for (optind = 0; optind < argv.length; optind++) {
     if (argv[optind].equals("-T")) {
          protocol = argv[++optind];
     } else if (argv[optind].equals("-H")) {
          host = argv[++optind];
     } else if (argv[optind].equals("-U")) {
          user = argv[++optind];
     } else if (argv[optind].equals("-P")) {
          password = argv[++optind];
     } else if (argv[optind].equals("-M")) {
          mailhost = argv[++optind];
     } else if (argv[optind].equals("-f")) {
          record = argv[++optind];
     } else if (argv[optind].equals("-a")) {
          file = argv[++optind];
     } else if (argv[optind].equals("-s")) {
          subject = argv[++optind];
     } else if (argv[optind].equals("-o")) { // originator
          from = argv[++optind];
     } else if (argv[optind].equals("-c")) {
          cc = argv[++optind];
     } else if (argv[optind].equals("-b")) {
          bcc = argv[++optind];
     } else if (argv[optind].equals("-L")) {
          url = argv[++optind];
     } else if (argv[optind].equals("-d")) {
          debug = true;
     } else if (argv[optind].equals("--")) {
          optind++;
          break;
     } else if (argv[optind].startsWith("-")) {
          System.out.println(
"Usage: msgsend [[-L store-url] | [-T prot] [-H host] [-U user] [-P passwd]]");
          System.out.println(
"\t[-s subject] [-o from-address] [-c cc-addresses] [-b bcc-addresses]");
          System.out.println(
"\t[-f record-mailbox] [-M transport-host] [-a attach-file] [-d] [address]");
          System.exit(1);
     } else {
          break;
     try {
     if (optind < argv.length) {
          // XXX - concatenate all remaining arguments
          to = argv[optind];
          System.out.println("To: " + to);
     } else {
          System.out.print("To: ");
          System.out.flush();
          to = in.readLine();
     if (subject == null) {
          System.out.print("Subject: ");
          System.out.flush();
          subject = in.readLine();
     } else {
          System.out.println("Subject: " + subject);
     Properties props = System.getProperties();
     // XXX - could use Session.getTransport() and Transport.connect()
     // XXX - assume we're using SMTP
     if (mailhost != null)
          props.put("mail.smtp.host", mailhost);
     // Get a Session object
     Session session = Session.getInstance(props, null);
     if (debug)
          session.setDebug(true);
     // construct the message
     Message msg = new MimeMessage(session);
     if (from != null)
          msg.setFrom(new InternetAddress(from));
     else
          msg.setFrom();
     msg.setRecipients(Message.RecipientType.TO,
                         InternetAddress.parse(to, false));
     if (cc != null)
          msg.setRecipients(Message.RecipientType.CC,
                         InternetAddress.parse(cc, false));
     if (bcc != null)
          msg.setRecipients(Message.RecipientType.BCC,
                         InternetAddress.parse(bcc, false));
     msg.setSubject(subject);
     String text = collect(in);
     if (file != null) {
          // Attach the specified file.
          // We need a multipart message to hold the attachment.
          MimeBodyPart mbp1 = new MimeBodyPart();
          mbp1.setText(text);
          MimeBodyPart mbp2 = new MimeBodyPart();
          mbp2.attachFile(file);
          MimeMultipart mp = new MimeMultipart();
          mp.addBodyPart(mbp1);
          mp.addBodyPart(mbp2);
          msg.setContent(mp);
     } else {
          // If the desired charset is known, you can use
          // setText(text, charset)
          msg.setText(text);
     msg.setHeader("X-Mailer", mailer);
     msg.setSentDate(new Date());
     // send the thing off
     Transport.send(msg);
     System.out.println("\nMail was sent successfully.");
     // Keep a copy, if requested.
     if (record != null) {
          // Get a Store object
          Store store = null;
          if (url != null) {
          URLName urln = new URLName(url);
          store = session.getStore(urln);
          store.connect();
          } else {
          if (protocol != null)
               store = session.getStore(protocol);
          else
               store = session.getStore();
          // Connect
          if (host != null || user != null || password != null)
               store.connect(host, user, password);
          else
               store.connect();
          // Get record Folder. Create if it does not exist.
          Folder folder = store.getFolder(record);
          if (folder == null) {
          System.err.println("Can't get record folder.");
          System.exit(1);
          if (!folder.exists())
          folder.create(Folder.HOLDS_MESSAGES);
          Message[] msgs = new Message[1];
          msgs[0] = msg;
          folder.appendMessages(msgs);
          System.out.println("Mail was recorded successfully.");
     } catch (Exception e) {
     e.printStackTrace();
public static String collect(BufferedReader in) throws IOException {
     String line;
     StringBuffer sb = new StringBuffer();
     while ((line = in.readLine()) != null) {
     sb.append(line);
     sb.append("\n");
     return sb.toString();
So please help me to resolve that error.

The directory that contains msgsend.class (usually the current directory)
is not in your CLASSPATH setting. Be sure that "." is included as one of the
entries in CLASSPATH.

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

Uncaught Exception occured while sending mail through abap code.

Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.

HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_ADDRESS_BCS
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
     terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
    procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An exception occurred
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
    "SAPLZSEND_MAIL" or "LZSEND_MAILU01"
    "ZSEND_EMAIL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue.

Problem while sending mail through posprocess event hadler inOIM 11g r2

Hi,
i am sending mail through posprocess event hadler inOIM 11g r2 when user is created.But i am getting following error in resolver class.
java.lang.NullPointerException
at oracle.iam.identity.usermgmt.impl.UserDetailsProviderImpl.getUserDetails(UserDetailsProviderImpl.java:102)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Edited by: 853559 on Sep 25, 2012 6:27 AM

If you are using Custom Notification XML, make sure to have StaticData element in it. StaticData defines the entitites that can be used in the notification template, and these entities attributes are used to define substitution tokens in the template.

About send mail through Outlook Express

I send mail through outlook . but system shows "your server has been terminate suddently. The possible reasons include servers error , NetWork error or long time among inactive status ." I promise the setting of POP3 and SMTP is right. Who can help me ? thank you.

I would start first with, do you know that the smtp setting for your server actually points to a Sun Java Enterprise Messaging Server?
what do you get on a command line when you do:
telnet <what you have for smtp> 25
?

Sending mails through PL/SQL in different domains

Hi all,
I am having procedure like this.....
create or replace procedure send_test_message
IS
mailhost VARCHAR2(64) := 'xxx.com';
sender VARCHAR2(64) := '[email protected]';
recipient VARCHAR2(64) := '[email protected]'; /* Error comes in this */
--recipient VARCHAR2(64) := '[email protected]'; /* This is working fine */
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
-- If we had the message in a single string, we could collapse
-- open_data(), write_data(), and close_data() into a single call to data().
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'This is a test message.' || chr(13));
utl_smtp.write_data(mail_conn, 'This is line 2.' || chr(13));
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
dbms_output.put_line('Successfully sends......');
EXCEPTION
WHEN OTHERS THEN
-- Insert error-handling code here
dbms_output.put_line(sqlerrm);
END;
When i called this procedure, i am getting following error....
ORA-29279: SMTP permanent error: 550 5.7.1 [email protected].. Relaying denied. IP name lookup failed [219.120.53.234]
[email protected] -- This mail id is mine and it exists.
Any help is appreciated.
Thanks in advance,
Pal

> May be silly for you, but i like to know,
Anybody (different provider/domain) can send mails through his mobile to my
mobile (different provider/domain). How it is possible ?
I send an e-mail to you. My mail reader contacts my e-mail server. The e-mail server sees that I'm from the same domain. It accepts my e-mail - it ignores (for now) what the recipient's domain are.
My domain's e-mail server looks at the recipient and sees your domain. It now attempts to contact your domain's e-mail server. If it fails, it sends me an e-mail telling me of that failure.
If it succeeds, it tells your e-mail server that it has an e-mail for you from me. Your e-mail server sees that the recipient is on its domain. It therefore accepts the e-mail and delivers it to your post box. Your e-mail server is not concerned about the originator (me and my domain) as the delivery is for someone on its domain.
Only when the recipient and sender are both "unknown" to the mail server, it will/should refuse to accept that e-mail and try to relay it between one and another domain.
Bottom line - when sending an e-mail the SMTP server expects that you are either on the same domain as it (in which case it is there to service you), or that you are delivering an e-mail for someone on its domain (that someone being serviced by the server).

Urgent:-REP-50152: Error while sending mail

hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanks

Your smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error in sending mail using ssl server

Hi All
Please help in resolving the below issue i am getting the following error while sending mail. I am using the IMAP server and it is ssl configured.
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "mail.test.com", port 465, isSSL true
DEBUG SMTP: exception reading response: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
javax.mail.MessagingException: Exception reading response;
nested exception is:
     javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1462)
     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1260)
     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
     at javax.mail.Service.connect(Service.java:275)
     at com.test.test.JavaMailApp2.main(JavaMailApp2.java:59)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
     at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:97)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at com.sun.mail.util.LineInputStream.readLine(LineInputStream.java:75)
     at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1440)
     ... 4 more
Caused by: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
     at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
     at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
     at sun.security.validator.Validator.validate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
     ... 17 more
Caused by: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at sun.security.provider.certpath.PKIXMasterCertPathValidator.validate(Unknown Source)
     at sun.security.provider.certpath.PKIXCertPathValidator.doValidate(Unknown Source)
     at sun.security.provider.certpath.PKIXCertPathValidator.engineValidate(Unknown Source)
     at java.security.cert.CertPathValidator.validate(Unknown Source)
     ... 24 moreBelow is the source code of the program.
package com.test.test;
import java.security.Security;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.NoSuchProviderException;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.AddressException;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
public class JavaMailApp {
     public static void main( String[] args )
          String d_email = "[email protected]";
          String d_uname = "ots.support";
          String d_password = "password";
          String d_host = "mail.test.com";
          String d_port = "465"; //465,587
          String m_to = "[email protected]";
          String m_subject = "Testing";
          String m_text = "Hey, this is the testing email.";
          Properties props = new Properties();
          props.put("mail.smtp.user", d_email);
          props.put("mail.smtp.host", d_host);
          props.put("mail.smtp.port", d_port);
          props.put("mail.smtp.starttls.enable","true");
          props.put("mail.smtp.debug", "true");
          props.put("mail.smtp.auth", "true");
          props.put("mail.smtp.socketFactory.port", d_port);
          props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
          props.put("mail.smtp.socketFactory.fallback", "false");
          SMTPAuthenticator auth = new SMTPAuthenticator();
          Session session = Session.getInstance(props, auth);
          session.setDebug(true);
          MimeMessage msg = new MimeMessage(session);
          try {
               msg.setText(m_text);
               msg.setSubject(m_subject);
               msg.setFrom(new InternetAddress(d_email));
               msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
               Transport transport = session.getTransport("smtps");
               transport.connect(d_host, 465, d_uname, d_password);
               transport.sendMessage(msg, msg.getAllRecipients());
               transport.close();
          } catch (MessagingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public class SMTPAuthenticator extends Authenticator{
     public PasswordAuthentication getPasswordAuthentication()
        return new PasswordAuthentication("[email protected]", "password");
}I have also added the certificate to my keystore using the following command and still i am facing this issue.
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jks
Add to fierof2's Reputation

this is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file.

Error: in sending mail through dynamics actions

Similar Messages

Maybe you are looking for