Error in sending workitem to outlook if Email id is not maintained in SU01

HI Guys,
                 Right now i am working with PCR workflows. Here the approval will go both to the SAP inbox and the Outlook Inbox. For sending workitem to outlook i had scheduled a background job RSWUWFML2.
          My problem is if the Email id is not maintained for the approving manager in SU01 Tcode, only userid is maintained, the workitem is being sent to SAP inbox and the workflow is getting errored because there is no Email Id for him.
                     How to resolve this issue i.e.workflow should also work fine if Email id is not configured.
Regards
Kumar

Sorry I read it otherwise....For the email to go to Outlook 2 approaches.
1) Maintain email in IT0105 for the manager
or
2) Maintain the email id in the userid of the manager.
Otherwise how the workflow know which email id the email has to go.
hope this helps
Regards,
Swati

Similar Messages

I'm trying to buy a song off of iTunes but when it says that it's gonna send my questions to a email it's not my email ..

I'm trying to buy a song off of iTunes but when it says that it's gonna send my questions to a email it's not my email ..

We.are.stardust please begin the installation process from the Creative Cloud Desktop application or use a different web browser. You can find additional details on how to install Flash and Illustrator CC 2014 at Creative Cloud Help | Install, update, or uninstall apps.

Error when sending a document link via email

Hi people,
I am on SAP EP 6.0 SP15 and below I describe my scenario.
I have some documents created in some KM folders. Today, I tried to send one of those documents via email to another portal user. If I go through Send To > Send Copy..., that other portal user receives the email with the document attached and he is able to open it... so far so good.
However, if i try to send the same document but now using a link (Send To > Send Link...), the other guy receives the email, but the link results in a 404 error when clicked.
I investigated a little and found that the link sent contains "" signals to indicate spaces in the folder names, instead of "%20". I believe this is the issue, because if I change manually the "" signals to "%20", the link works perfectly.
My question is: is there a way to configure the sistem to use "%20" instead of "+" to represent spaces? Or I will have to remove the spaces from ALL my folder names?
Thanks
Fernando Urzedo

Hi Fernando,
this seems to be a bug. In the release notes of KMC SPS16 incl. P1, this is not reported as fixed (on the other hand, not every fixed bug gets reported in the release notes).
You could try to patch your portal first; if you don't can do this at the moment or if the bug persists after patching, please open an OSS message.
Hope it helps
Detlev

Hp 7520 gives error message when trying to scan to email. Says not connected to Internet......

Can anyone help. I can't scan anything! Say not connected to web, but I am!

Hi Finner6,
Welcome to the HP Support Forums. I see that you are getting a connection error when trying to use the scan to email feature of your Photosmart 7520 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps with screen shots on how to do this. Don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
If after setting the manual IP address and DNS servers you are still getting the same error message, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Send the purchase order by email with footer notes

Hi,
I am able to sent PO by email as attachment.
But Additionally I need to add footer note( like Confidential..so on) in email content. Is there any way to do it..
Pls help me...
Thanks
Rays

Create spooll..
Read spool and convert it into PDf file
Thend send attachemnt(pdf) with footer note using FM SO_NEW_DOCUMENT_ATT_SEND_API1

Sending a smartfom to an email id but not as an attachment.

Hi,
I need to send smartform as email.But it shud not be as an attachment.Rather the body of the email shud contain the contents of the smartform(can be HTML/Text) i.e if I am running the report in batch then the contents of the email can dynamically change on every run.
Is it possible to have a selection screen where I can enter, say 15 lines of text(Similar to the body of an email) and pass those values to the body of the smartform?
A needful response will be highly appreciated.

Hi,
Use the below link.
Hope this is useful.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/mail%2bsend%2bthrough%2boutput%2bcontrols
Regards,
Phani.

How can I send a website page by email with Firefox, not just the link?

I am unable to SEND web pages with Firefox.
With Internet Explorer, I simply go to FILE - Send - Page by email, (or Link by email). By sending the page, I can add some comments, remove some advertising, and/or highlight points I would like to highlight.
The question then, is there a way to Send - Page by email in Firefox?
If so, I will make it my default browser.
Thank you.

What email service are you using?

How to get siri to send a text to an email address and not the iphone number?

Better worded this time. Siri sends texts using a contact iphone number if they have one. I want it to send to the contacts email address (or apple id). if no iphone is present for a contact siri asks me which address i want to use. if there is an iphone listed for the contact it defaults to that phone number. I don't want it to do that. I want siri to always use the email address. Can that be done?

If you wrote your database send mail package to support different MIME Types, then you need to change the MIME Type to HTML before you add the HTML tags to your email message body. Check out this article (Sending Email from the database with UTL_SMTP package) and look at the "maildemo.sql" package provided in the article. This package will show you how to set the MIME Type to support HTML message bodies.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

HT5312 I have forgotten my security questions and now i cant download a book. I have tried going into apple id management and followed these instructions. The option to send it to my rescue email address is not there.how do i reset them?

I followed these instrcutions and it is very frsutrating seeing as I have to answer my security questions to reset them ? When i cannot remember them. I already scheduled a call with Apple. The closest time available was Friday but I wantto see if i can fix it beforethen.

i know how you feel. im about to just give up and call apple support. it will be a lot faster than sitting around. Im sorry i wasnt much help.

RSWUWFML2 - CONVERSION ERROR sending workitem out via SCOT

Hi there,
Please help, I am using report RSWUWFML2 to send workitems to outlook, the email gets to outlook but it seems like there is a CONVERSION error that occurs in SAP that results in no workitem ATTACHMENT being in the email.
The error in the email is: "Message cannot be processed as it cannot be converted"
I turned on the trace in SCOT and this is the log....look at the sections in BOLD to see what happened:
SX_PERFORM_RFCSEND G Formats supported: ALI INT OBJ OTF PDF RAW SCR URL 
SX_OUTGOING_VERSION_BUILD G Read contents of document RAW32000000034669
SO_OBJECT_DATA_FOR_SEND_GET G Object transferred
SX_OUTGOING_VERSION_BUILD G Converting document RAW32000000034669 from TXT to INT SX_OUTGOING_VERSION_BUILD G Read contents of document EXT32000000011065
SO_OBJECT_DATA_FOR_SEND_GET G Object transferred
SX_OUTGOING_VERSION_BUILD G No suitable conversion found for SAP SX_GENERATE_NDR G Message cannot be processed as it cannot be converted 
My apologies for the bad formatting above, was the best I could do from copy and paste from SCOT....
I have also looked at the "conversion rules" in SCOT.....could this be the problem? It seems to want to convert type "SAP" to something.....but there is no "SAP type" in the conversion rules?
PLEASE help, I really need to get over this obstacle
Thanks
Lynton

Not sure if this will confuse matters more but if I look in the LOGS further in transaction SLG1 I see the following:
Typ Message text
Selection Setting: p_jobsuf = 2
 Selection Setting: p_tasks = TS00007986
 Selection Setting: x_sc_inb =
 Selection Setting: x_sc_dis =
 Selection Setting: x_sc_exe = X
 Selection Setting: p_s_nac = SWU_NOTIF
 Selection Setting: p_s_nan = 002
 Selection Setting: p_prol = SWU_NOTIF_PROLOG1
 Selection Setting: p_epil = SWU_NOTIF_EPILOG2
 Selection Setting: p_logon =
 Selection Setting: p_fromd = 03.12.2007
 Selection Setting: p_fromt = 08:00:00
 Selection Setting: p_user =
 Selection Setting: x_err_tr =
 Selection Setting: x_alw_tr = X
 Work item 000001389473 being edited
 SAPoffice document RAW32000000034669 sent
 Work item 000001389473: Send ok
 Work item 000001389473 sent to [email protected]
So this log looks fine BUT the previous trace from SCOT looks bad.....
Any ideas?
Lynton

Sending mail to OUTLOOK from SAP when error encountered in MM creation

Hi ,
I am able to send a message to SAP inbox which i can view from SBWP. But as well i need to send mail to the OUTLOOK .How can i send this OUTLOOK .
I have configured the mail id in SCOT.
Even i configured in SCOT with BASIS team i m not able to send mail to outlook.I even checked in SOST their is no entry in that .
Is their a need for writing separate logic for sending mail to OUTLOOK as well?
Regards,
Ranjith ,
+91-8431858286.

HI Modak,
Please help me in getting out of this error encountered during a sample workflow thing.
Here is the requirement I need to send a OUTLOOK mail from SAP.If the user accepts the workflow task then mail need to send a recipient ,stating that he accepthed the request.
Below I designed that task.
In send Mail step I added the recipent thing as stated below.But I was unable to send mail to OUTLOOK .In this I am not even getting notification in my SBWP in SAP INBOX.

Error msg: Sending of password for user did not succeed. Mail server responded: Not enough disk space - what's the deal?

I've been checking my email via webmail for a week and am back in the office today. Fired up Thunderbird, expecting it to pick up all my email, but it gets nothing and tells me…
Sending of password for user [email protected] did not succeed. Mail server pop.ipower.com responded: Not enough disk space
Haven't seen this particular error message come up in searches via google and at mozilla. There's definitely disk space on my machine. I'm running TB on a Mac (OSX 10.6.8). Disk Space options under Preferences > Advanced let me assign up to 1024 mb for the cache, which I've done, and cleared.
Has anyone encountered this before? Got a solve/troubleshooting process? Thanks!

Thanks. I do compact regularly (TB prompts me to) and did it (several times) via Preferences today to try and get TB past this error message.
Also went thru and Trashed + Empty Trashed as many messages as possible from the inbox, just in case. Still no-go.

How to force Outlook's Junk email fitler to not filter Exchange 2010 SP1 accepted domains?

Hello,
I wonder if there really is no way how to reach the result described in the title question. Because
http://support.microsoft.com/kb/2458522 says:
This issue occurs because of a functionality change that is introduced in Exchange Server 2010 SP1. In Exchange Server 2010 SP1, domains that are configured as accepted domains are no longer allowed in the junk email lists of a mailbox.
So please tell us Microsoft how can we force Outlook to accept internal domain as a trusted senders and not apply Junk email filter on it?
There was already a long discussion about the steps here
http://social.technet.microsoft.com/Forums/en-US/outlook/thread/15f857c6-0ed4-4004-9d90-cb5d16361752 so please don't offer anything described there.
Thank you,

Trying to deal with the Outlook Junk Email Filter is not very easy and had been a pain in the butt.
The ONLY way to ensure the Outlook 2010 Junk Email filter honors "white listed" emails is to stamp the email with SCL -1. Setting a transport rule will do that but it is not very flexible.
I was able to resolve these issues by simply enabling the Exchange 2010 Anti-Spam agents on each hub transport server. We have no Edge Server but we use a couple of Ironports at the gateway which provide the bulk of AntiSpam. We didn't think we would
need the Exchange AntiSpam so we hadn't initially enabled. After months of trying to resolve people's complaints of emails from internal system ending up in Junk, this solution worked for us.
This is the order in which it was done.
1. We set the receive connectors for the internal systems for bypassing Anti Spam. We basically have 2 receive connectors, one for internal system with no relay, and one for internal systems who are allowed external relay.
Get-ReceiveConnector "server\name of the recieve connector" | Add-ADPermission -User "“NT Authority\Anonymous Logon” -AccessRights ExtendedRight
-ExtendedRights ms-exch-bypass-anti-spam
Note: If you use SMTP Authentication, Exchange will only mark the emails as "Internal" and not assign a SCL of -1. It can only be on anonymous connections.
Note: We have a separate receive connector for the Ironports delivering external email that will not bypass Anti-Spam. These emails will receive a SCL rating of 0-9
2. We set the global SCL to 6 (default is 4). You can set it to whatever you want.
Set-OrganizationConfig -SCLJunkThreshold 6
So basically, any email tagged with SCL 7-9 will be moved to Junk by Exchange.
3. Set-ContentFilterConfig -SCLQuarantineEnabled $False -SCLDeleteEnabled $False -SCLRejectEnabled $False
We don't want delete, reject or quarantine anything on Exchange. Just move email to Junk folder if SCL 7-9 and have user deal with it.
4. Set the Internal SMTP Servers by adding each Exchange server's IP Address to the Global Transport Settings. I used EMC, Organization Config, Global Settings, Transport Settings properties, Message Delivery tab. Do NOT add any other "internal" servers
here, only the Exchange servers.
5. Then we installed the AS agents on each HT Server.
Starting with the first server
Stop MSExchange Transport service
D:\Program Files\Microsoft\Exchange Server\V14\Scripts>.\install-AntispamAgents.ps1
After installation, disable all the agents except for Content Filtering Agent. This agent has to be enabled for Exchange to stamp the email with SCL -1. I used EMC, Organization Config, Hub Transport. You will see a new tab called Anti-Spam. Disable everything
except Content Filtering.
Start MSExchange Transport service.
Repeat on each HT server. (You won't have to repeat the disabling of the agents as that is a global setting)
6. You can add global safe senders by doing the following.
$list = (Get-ContentFilterConfig).BypassedSenders
$list
$list.add("[email protected]")
$list.add("[email protected]")
Set-ContentFilterConfig -BypassedSenders $list
The message headers are stamped with
For emails sent through the Internal connector
X-MS-Exchange-Organization-Antispam-Report: MessageSecurityAntispamBypass
X-MS-Exchange-Organization-SCL: -1
OR
For external emails from a safe sender
X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
X-MS-Exchange-Organization-SCL: -1
OR
For all other external emails
X-MS-Exchange-Organization-SCL: 0
Good Luck. This has basically stopped all the calls about "legitimate" email in Junk Email folder.

Sending Mail to Outlook

Hi All,
Through Report RSWUWFML2 i am sending workitems to Outlook, But the mails are going in Junk Folder.
System is ECC 5.0
Please suggest what needs to be done.
Thanks and Regards,
Vaibhav

Hi,
First goto su01 and check the mail id for wf-batch the back ground user for workflow...take that id and add to the contact list of user who is getting the mail in junk folder..... try dis hope it should work..
Regards Dev

Terminated with error: REP-50152:Error while sending mail

Hi
Gets this error while sending report mails to external email id's
Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Any setting to be done in report config file?
thanks
MG

It should be like this
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
Specify the name of your mail server in the place of %MAILSERVER_NAME% above
Also make sure that this is not commented out.
Thanks,

Error in sending workitem to outlook if Email id is not maintained in SU01

Similar Messages

Maybe you are looking for