Error in Server log of one of the server on the clustered environment(OBI)

Hi
We had setup Clustered Environment and when we are trying to log in on to the Primary Server which is also Primary Controller, everything is fine on front end but we had faced the following error in the server log as follows : "[46036] Internal Assertion: Condition m_hFile != hFileNull, file .\Src\mfcfile.cpp, line 447."
Please provide help by letting me know what this error mean and how can we avoid this error.

What happens if you disable your master BI server, do you get the error in the other BI Server log when you login to Presentation Services?
The message is an internal error, you need to raise an SR with Oracle to determine why it's happening and how to prevent it.

Similar Messages

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

Error opening installation log file | Windows

Common reason for Mirage Server Failure in Clustered Environment and how clients will be switched to other server in a cluster

Hi,
Can Anybody share me the information regarding Common reason for Mirage Server Failure in Clustered Environment.
And how clients will be switched to other server in a cluster to continue their operations from the failed server.
Regards,
Bathesha C

Hello,
if you have more than one mirage server configured with Load balancing (LB or MSFTNLB) the client would disconnect from the faulting server and then reconnect to an other server to progress with the action as before.
All Mirage server are stateless and share the same SIS (single instance store) so any server can update or create CVD file set for an client.
Hope that helps.

Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!

Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error:41453 in log file even when the account data is imported successfully

Hi,
As a beginner, I tried importing ‘Accounts’ record type with 2 records, by taking below 4 fields:
Account Name, Account Type, City, Owner
The email received for the account import request completion has below details:
Total Records: 2
Successfully Imported: 0
Partially Imported: 0
Duplicate Records Ignored: 0
Failed: 2
Against both the records, error : 41453 is mentioned in the log file, with error description as - An unexpected error occurred during the import of the following row: 'Account Name: <name of account>'
However when I query for the records under Account tab, the records are all created properly (with all the values correctly present). I am not sure why am I getting this error if the records are successfully imported? Any help on this would be appreciated.
In import wizard below selection was made-
Select the method Import should use to uniquely identify matching records. You can use either the External Unique ID or On Demand Row ID or the following On Demand predefined fields: Account Name, Location
* External Unique ID
If the unique record identifier of the record being imported matches a record already in On Demand:
* Don't Import Duplicate Records
If the unique record identifier of the record being imported does not match a record already in On Demand:
* Create New Record
The import process may encounter field values that do not match the picklist values for fields in Oracle CRM On Demand. Please decide how to resolve these conflicts:
* Don't Import Field Value
This option allows you to decide if import should create a new record for missing associations (related records) in your data file.
For the current import, this option will apply to the following associated record fields: Parent Account
* Create Associated Record
Thanks,
Gunjan

*'Create Associated Record’ & ‘Don't Create Associated Record’*
If you are inserting Contacts. Account for that Contact is an Associated Record.
And if you gave 'Create Associated Record’ it will create Accounts for that Contact if it didn't find a matching Account and insert the Contact.
If you gave ‘Don't Create Associated Record’ it will not create Account and the Contact.
Its better to give ‘Don't Create Associated Record’ since the Account you gave in contact is case sensitive.
So if u give 'Create Associated Record’ then while inserting contact if the account is not exactly matching even though it exist in some other case(lower/upper)
it wont map to that account which you meant and will create a new Account and map it to that contact.
Hope you got some idea.
Regards,
Lemu

I am usiing Kaspersky Internet protection. I keep getting a 403 error Virus Detected on just one of the files that I am trying to convert. What do I need to do.

I am getting a message 403 that the file that I am trying to convert has a virus. I use Kaspersky virus detection and I ran it on just that file. I have converted another file with on problems. What do I need to do?

What is your Windows version? 32-bit or 64-bit?
Internet Explorer: you must use the 32-bit version, regardless of your OS version.
What is the exact error you get, and what are you doing when you get that error?

Found the errors in CSSD logs of RAC node

Found the below error in CSSD logs in One of RAC nodes from 5:15 to 5:18 PM, after this the error got disappeared. Could anyone please have an idea what could be the reason of this error.
Also, at that time we didn't find any errors in the alert log.
[    CSSD]2009-07-19 17:15:51.048 [3600] >TRACE: Authorization failed (112bd2a70), timed out, start 17:13:51.041, duration 120009
[    CSSD]2009-07-19 17:15:51.048 [3600] >TRACE: Authorization prepare time: 2 ms
[    CSSD]2009-07-19 17:15:51.233 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b67930) proc(112b680b0) pid(1049540) proto(10:2:1:1)
[    CSSD]2009-07-19 17:15:51.268 [3600] >TRACE: Authorization failed (112bd4a10), timed out, start 17:13:51.268, duration 120003
[    CSSD]2009-07-19 17:15:51.268 [3600] >TRACE: Authorization prepare time: 3 ms
[    CSSD]2009-07-19 17:15:52.544 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b67930) proc(112b680b0) pid(786918) proto(10:2:1:1)
[    CSSD]2009-07-19 17:15:53.297 [3600] >TRACE: Authorization failed (112c38af0), timed out, start 17:13:53.290, duration 120009
[    CSSD]2009-07-19 17:15:53.297 [3600] >TRACE: Authorization prepare time: 3 ms
[    CSSD]2009-07-19 17:15:53.317 [3600] >TRACE: Authorization failed (112d356f0), timed out, start 17:13:53.320, duration 120000
[    CSSD]2009-07-19 17:15:53.317 [3600] >TRACE: Authorization prepare time: 2 ms
[    CSSD]2009-07-19 17:16:02.342 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b932b0) proc(112b67d10) pid(1336252) proto(10:2:1:1)
[    CSSD]2009-07-19 17:16:02.977 [3600] >TRACE: Authorization failed (112d04f70), timed out, start 17:14:02.978, duration 120001
[    CSSD]2009-07-19 17:16:02.977 [3600] >TRACE: Authorization prepare time: 2 ms
[    CSSD]2009-07-19 17:16:03.007 [3600] >TRACE: Authorization failed (112d38210), timed out, start 17:14:03.006, duration 120002
[    CSSD]2009-07-19 17:16:03.007 [3600] >TRACE: Authorization prepare time: 2 ms
[    CSSD]2009-07-19 17:16:10.447 [3600] >TRACE: Authorization failed (112bd7e30), timed out, start 17:14:10.441, duration 120007
[    CSSD]2009-07-19 17:16:10.447 [3600] >TRACE: Authorization prepare time: 2 ms
[    CSSD]2009-07-19 17:16:10.847 [3600] >TRACE: Authorization failed (112d3ee70), timed out, start 17:14:10.840, duration 120008
[    CSSD]2009-07-19 17:16:10.847 [3600] >TRACE: Authorization prepare time: 2 ms
Thanks,
Mahi

Check the metalink note:
6996694-OCSSD.BIN CONSUMING 100% CPU AND ASM/DB HANGING

Listener not working in one of the servers of the Standby site

Hello,
The system is a RAC with two servers working as Primary site, and two servers working as Standby site.
Both servers of the Primary site are sending redo logs to one of the servers of the Standby site. The other server of the Standby site is not receiving any redo log.
I have checked the listener.ora and the tnsnames.ora files of the server that is not receiving and it is well configured comparing it with the server that is receiving the redo logs.
If I check the status of the listener: lsnrctl status listener_<node name>
Both of the Standby servers look fine.
But if I connect directly to the database...
In the 1st server of the Standby, the IP appears:
SQL> show parameter listener
NAME TYPE VALUE
local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = xxxx))
remote_listener string LISTENERS_DB
Nevertheless, in the second server of the Standby site, the one that is not receiving the redo logs, the IP does not appear:
SQL> show parameter listener
NAME TYPE VALUE
local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT = xxxx))
remote_listener string LISTENERS_DB
I have found the following to reload the listener:
Oracle# lsnrctl reload listener_`hostname`
Oracle# lsnrctl reload listener_standby
Has anyone tried this? Did it work? It can be run without affecting the sytem, Dataguard, replication..., right?
If you have another idea to fix this, let me know please.
Thank you ;)
Edited by: user11281526 on 29-oct-2009 4:35
Edited by: user11281526 on 30-oct-2009 7:36
Edited by: user11281526 on 31-oct-2009 4:11

If I see the status of the listener_standby in the second server of the Standby site, the one that it is not receiving redo logs, it looks like it is fine. Why?
#lsnrctl status listener_standby
LSNRCTL for Solaris: Version 10.1.0.4.0 - Production on dd-mm-yyyy hh:mm:ss
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=IP_second_server_standby)(PORT=xxxx)))
STATUS of the LISTENER
Alias listener_standby
Version TNSLSNR for Solaris: Version 10.1.0.4.0 - Production
Start Date dd-mm-yyyy hh:mm:ss
Uptime xx days yy hr. zz min.
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/10.1.0/db_1/network/admin/listener.ora
Listener Log File /opt/oracle/product/10.1.0/db_1/network/log/listener_standby.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=IP_second_server_standby)(PORT=xxxx)))
Services Summary...
Service "DB1" has 1 instance(s).
Instance "DB1", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Edited by: user11281526 on 29-oct-2009 6:41
Edited by: user11281526 on 29-oct-2009 6:42
Edited by: user11281526 on 29-oct-2009 6:43

Cannot cancel Incoming Payment. One of the credit vouchers were cashed.

Dear Experts,
While canceling an incoming payment, I hit the below error message:
"Cannot cancel. One of the credit vouchers were cashed."
Please note that the deposits for this payment is cancelled.
Please help advice!
Warmest Regards,
Chinho

Hi!
This problem is because of, the Due Date Mentioned in your payment is less than your System Date.
To cancel this payment, do the following. (Do all this in SAP Server)
1. As we need to change System Date ask all users to logg out from SAP.
2. Ensure no user is booking any documents.
3. Close SAP Appliaction and Change the system date previous or same date in the Due Date of that Document
4. Select appropriate posting period, unlock posting period
5. Open the Payment screen and select your document.
6. Cancel the Document, choose document date as the cancel date.
7. Close SAP again and change the system date to current date

Error opening installation log file.

ProblemYou are unable to install BlackBerry Desktop Manager and the following error message is displayed when you open the installation log file:
Error opening installation log file verify that the specified log file exist and is writable.
ResolutionTo resolve this issue, edit the system environment variables by completing the following steps:
Warning: The following procedure requires modifying the computer environment variables. This can result in unexpected system behavior. Document the existing values prior to implementing any changes. To search for the Install.log file or files in the temp folder:
On the Start menu, click Run and type %temp%.
Click OK.
In the Temp folder, click Search and then All files and folders. In the All or part of the file name field, type Install.log and set the Look in field value to Temp.
Click Search.
If the Install.log file is found, delete it.
In Windows® Explorer, go to the C:\ drive and create a new folder called TEMP2.
Open the Control Panel and double-click the System icon.
On the Advanced tab, click Environment Variables.
In the User variables list, select TEMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the User variables list, select TMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the Environment Variables window, click OK.
In the System Properties window, click Apply and then OK.
Restart the computer for the changes to take effect.
Repeat the installation procedure for BlackBerry Desktop Manager.
I have 8330

hello,
another solution is here :
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Cached Lookup error in GWia log ???

Response: 550 No such user (imailserver) Cached lookup ...
Above is the error I'm getting in my GWIA logs ... below is more in Diagnostic mode on the GWIA.
14:27:44 1FD MSG 1907 Analyzing result file: servername/vol01:\DOM03\WPGATE\GWIA\result\rbf2a3c3.026
14:27:44 1FD {SmtpResl:ProcessErrors
14:27:44 1FD MSG 1907 Command: xyzp.gc.ca
14:27:44 1FD MSG 1907 Response: 220 ************************************************** ********
14:27:44 1FD MSG 1907 Command: EHLO xyzp.gc.ca
14:27:44 1FD MSG 1907 Response: 250 ok
14:27:44 1FD MSG 1907 Command: M:<>
14:27:44 1FD MSG 1907 Response: 250 Command MAIL OK
14:27:44 1FD MSG 1907 Detected error on SMTP command
14:27:44 1FD MSG 1907 Command: RCPT TO:
14:27:44 1FD MSG 1907 Response: 550 No such user (imailserver) Cached lookup
14:27:44 1FD MSG 1907 Command: DATA
14:27:44 1FD MSG 1907 Response: 221 Command QUIT, disconnecting
The (imailserver) entry above is what we use to grab POP mail from our provider (It's a product called iMailDS).
D

Ok then ... I traced it back to the iMailDS. It was a (a few) bad .MSG messages that seemed to be stuck in the Output directory of iMailDS. Once we removed them all was back to normal.
Thanks ...
>>>
From: DZanre<dzanre@no_mx.forums.novell.com>
To:novell.support.groupwise.7x.gwia
Date: 2010-05-19 8:41 AM
Subject: Re: Cached Lookup error in GWia log ???
> The (imailserver) entry above is what we use to grab POP
> mail from our provider (It's a product called iMailDS).
This is what is generating this error though. The GWIA log is just
reporting what iMailDS tells it.
Danita - http://www.caledonia.net.blog

Error saving multiple Sales document modified by the BAPI (with cnfg)

Dear Sir/Madam,
I have a requirement for which i am modifying a Sales Quotation and
then Sales Contract created w.r.t. Sales Quotation. I am using the
following function modules in sequence specified to modify the
documents:
1. BAPI_CUSTOMERQUOTATION_CHANGE - to change Sales Quotation
2. SD_SALESDOCUMENT_CHANGE - to change the Sales Contract with the
parameter CALL_FROM_BAPI marked as 'X' if the quotation was processed
successfully but not saved to the database
The BAPI transaction commit is called only after both the Sales
documents have been processed successfully. In case there is an error
in updation in any one of the Sales documents then the
BAPI_TRANSACTION_ROLLBACK is called.
After successful processing both the documents are getting commited
with the correct reference of the Quotation item in the contract items.
Now when i view the Sales Contract all updations have happened
successfully and i can view the data properly, also the items
configuration data.
When i go to view the Sales Quotation i can see that the new item which
needed to be added to this document has been added successfully however
when i go to view the configuration data for the newly added item i get
an error V1854 , 'Internal error in communication between configuration
and sales document in the form GET_CONFIG_MODE'.
If i do a commit individually after the each function module call then
all documents are saved properly and can be viewed without any errors.
Please advise why this error is happening.
warm regards,
Nitesh

I think I found a way to get it to do what I want,,,
1) Use the first signature collection lock to lock only the fields that that person is signing-off on.
2) The next manager then signs off and locks only his comments and text boxes, as well as the signature of the preceeding manager. This way text fields are only locked by one signature collection and thus to edit anything you have to clear that manager's signature to edit the related text boxes, then to re-sign that section you must clear the other (higher level) signatures to open up the signature field for resigning,,, I think this is providing the protection I want,,, Yea,,, let's get this form back into our stupid ISO system ;)

Production Server is Clustering environment..

Dear Sap Gurus,
*The Production Server is in Clustering environment, so the scenario is:-- *
PRD1 = Server1 (say ip= 192.13.12.10)
PRD2 = Server2 (say ip = 192.13.12.11)
PRD = To create join b/w the two Application Servers
Now I have created a Report which gets downloaded(same path given in both PRD1 and PRD2) in the Application Server...
Now while searching for the file path, due to clustering enviroment sometimes SYSTEM creates the file in PRD1(IP = 192.13.12.10) and sometimes in PRD2( IP=192.13.12.11).....(Randomly).....
For Example: (say) A file named "abc.xls" has been created in PRD1.
Main Problem which I am facing is while downloading this file to my Desktop.....
I am using the Transaction CG3Y for it and when I'm providing the filename(with path) in the Source it says "file not found"....
I guess the reason for this is that CG3y transaction is hitting the PRD2 Server where file does not exists.So kindly guide so that I am able to download the file to my Desktop......
Pls guide......
Thanks and Regards,
Abhishek Banerjee

Try to map the drives with NFS. Might resolve the issue.
Regards
Parag

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003

rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003

Error in Server log of one of the server on the clustered environment(OBI)

Similar Messages

Maybe you are looking for