Error in Set Personalization Profile
Hello Friends,
I am trying to simulate planning scenario in IDES and entered in KEPM Transaction.
While starting this, I have seen the option of personalized profile and created a personlized one and it was set.
and now I could not see other planning profiles and I could not remove my personalized profile which I have set.
Can anybody throw light on this?
Regards,
Santosh Varanasi
Hi,
Do you see the button, General overview? if not, you have missed granting authorizations to your profile.
Already posted..Check this link
Re: KEPM - how to activate the menu option for personalization profile
Hope this helps.
Edited by: Pradeep kumar Athmakur on Feb 16, 2010 5:28 PM
Similar Messages
-
Error reading setting in profile manager
Hi
I don't know why but for no apparent reason I have started to get this error message all the time.
Error reading settings for the Profile Manager Service.
All very well but I do not use Profile Magaer, it is turned off but keeps throwing this error message!!!!
I am a real Server Newbie.
HELP PLEASE!only my mac (which is running the server OS) is not enrolling.
Why are you trying to enroll your device management server in it's own device management?
I've never tested anything like that, but I bet you can't do that... -
Hi Experts ,
Currently performing EHP7 upgrade I have faced error during the configuration phase , below attached was the error screenshot .
error logs shows the below :
Executing module 'PREP_INSTALL'.
Execution of PREPARE module "Installation" begins at 20140302202456
# Starting phase execution with maxpar = 6, scheduled: 14x'-'
CURRENTPHASE PREP_INSTALL/SHDINST_OS
...started at 20140302202456
# Using phase log file 'SHDINST_OS.LOG'.
..finished at 20140302202457 with status ABORTED.
# Error message set: 'Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details'
.begin dialog at 20140302202459
SHDINST_OS log :
1 ETQ399 Possibly the password for user ISNET\SAPServiceDEC entered in phase
1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
1EETQ399 Last error code set is: Process H:\SUM\abap\exe/sapstartsrv.exe exited with -1, see 'H:\SUM\abap\log\SAPup.ECO' for details
1EETQ204 Upgrade phase "SHDINST_OS" aborted with severe errors ("20140302202457")
Kindly advice to fixHi Mohan,
Solution of your issue is already present in SHDINST_OS.LOG
Possibly the password for user ISNET\SAPServiceDEC entered in phase
1 ETQ399 INITPUT was wrong. You can reset it by calling 'SAPup set stdpar'.
1 ETQ399 Try to execute SAPSTARTSRV.EXE manually using the following syntax:
1 ETQ399 H:\SUM\abap\exe\sapstartsrv.exe -r
1 ETQ399 -p H:\SUM\abap\DEC\SYS\profile\START_DVEBMGS01_SAPECCDV -s DEC -n 01
1 ETQ399 -U ISNET\SAPServiceDEC -P <PASSWORD> -e ISNET\decadm
1 ETQ399 and check if the service SAPDEC_01 can be stopped and restarted.
Read the log carefully.Have you performed the above mentioned steps from SHDINST_OS.LOG file at your end.
Also just give a full restart your server,up all the required services & confirm the execution of the phase.
Thanks,
Gaurav -
Error in B1 DB Profiler:
Even though I configured my SBO_SP_Transaction Notification stored Procedure, I am getting the Error like below.
"An addon test has been run.Several lines should appear in the B1DbProfiler is not correctly configured.If failed please check you have copied the needed code into the SBO_SP_TransactionNotification stored procedure."
Below Note: i found this in discription file....
"Important Note: Please pay attention to the declaration of the object_type variable inside the SBO_SP_TransactionNotification stored procedure. In precedent version it was declared as int, starting from B1 2004 and B1TE 2.0 version we require the declaration of this variable as nvarchar(20). Please change it if you have the old declaration version."
According to the Note: in above i also changed the declaration even though i am getting this error
i am using the sap version->SAP B1 2005B(7.40.252)SP:00 PL:39
Plz give me a nice solution
Regards,
Ani.Hi below is my sp format.....
i am not having Any if object type=30
*"set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(25), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, <u>pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- ADD YOUR CODE HERE
DECLARE @object int --declare the object variable
DECLARE @hresult int --declare the hresult variable
EXEC @hresult = sp_OACreate 'B1DbProfilerCOM.Profiler', @object OUT
EXEC @hresult = sp_OAMethod @object, logDb, NULL,
@object_type,
@transaction_type,
@num_of_cols_in_key,
@list_of_key_cols_tab_del,
@list_of_cols_val_tab_del
IF @hresult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @object
RETURN
END
-- Select the return values
select @error, @error_message
end"* -
Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?
Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad. It's more common than you'd think.
To avert the error:
Open the Color Management panel of your Windows operating system. In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
After doing the above, log out of Windows and back in again, just to ensure everything's updated.
Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1). For many monitors this isn't a terribly wrong assumption.
If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor. You'll want to take some time to get your mind around how color-management works, and that is not a trivial task. It's certainly well beyond what can be taught in a forum post by post.
Good luck.
-Noel -
How can we set the profile options to increase OPP response Time
Hi All,
While running the concurrent program to merge the data template and rtf template we got the following message in the log file.
Executing request completion options... ------------- 1) PUBLISH ------------- Beginning post-processing of request 9079946 on node G2C-IDEV-02 at 21-SEP-2007 02:04:49. Post-processing of request 9079946 failed at 21-SEP-2007 02:19:53 with the error message: The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status. Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary. --------------------------------------
Thanks in advanceHi ,
There are 2 new profiles options that can be used to control the timeouts. Depending on the error message, one of the following solutions needs to be implemented.
Profile Option : Concurrent:OPP Response Timeout
Internal Name : CONC_PP_RESPONSE_TIMEOUT
Description : Specifies the amount of time a manager waits for OPP to respond to its request for post processing.
Profile Option : Concurrent:OPP Process Timeout
Internal Name : CONC_PP_PROCESS_TIMEOUT
Description : Specifies the amount of time the manager waits for the OPP to actually process the request.
Note: The profile options are available as of $FND_TOP/patch/115/sql/AFCPOPRB.pls 115.3 and are included in Patch 4125550 11.5.10 CU2 for ATG Product family.
Solution A
Option 1: Increase the value (in seconds) for the profile option 'Concurrent:OPP Response Timeout'.
Option 2: Increase the number of processes or threads (or both) of the OPP via Oracle Applications Manager (see Note 291792.1 for the detailed instructions)
Solution B
Increase the value (in seconds) for the profile option 'Concurrent:OPP Process Timeout'.
Workaround
The timeouts can also be altered directly in the package AFCPOPRB.pls :
-- Default timeout values for waiting on a response to a request (seconds)
TIMEOUT1 constant number := 120;
TIMEOUT2 constant number := 300;
TIMEOUT1 and TIMEOUT2 corresponds to respectively OPP Response Timeout (solution A) and OPP Process Timeout (solution B).
Cheers
Ranjit. -
Last error code set: Unresolved requests in buffer SID
Hi All,
We are installing EHP4 SP6 in our ECC 6.0 system. Weu2019ve created a .xml
file in our solution manager and calculated a download queue with the MOPZ. The installation is on a Windows 2003 32 Bit platform with a SQL server 2005 SP2 DB. There is 40Gb pagefile and 15Gb memory available. The latest SAP kernel (254) is also installed.
In roadmap step 5 (Preprocessing) the installation stops with the
message: u201CChecks after phase MAIN_SHDRUN/ACT_UPG were negative! Last
error code set: Unresolved requests in buffer <SID>Check logfiles 'ACTUPG.ELG' and 'J:\EHPI\abap\log\SAPehpi.ECO'u201D
In the log files there many entryu2019s of: DDIC ACTIVATION ERRORS and
RETURN CODE in SAPAW70106.VCW 1 ETP111 exit code : "12"
By looking at the logfiles, it seems to be a problem with the job RDDMASGL in the shadow instance. The job terminates and a runtime TSV_LIN_ALLOC_FAILED error occurs.
Iu2019ve changed some parameters in the shadow instance profile to:
abap/heap_area_total = 4000000000
ztta/max_memreq_MB = 1000
ztta/roll_area = 2000000
ztta/roll_extension = 2000000000
abap/heap_area_dia = 2000000000
abap/heap_area_nondia = 2000000000
em/initial_size_MB = 2048
But after repeating the phase, the installation stops again.
Hopefully some of you can provide me some information so that I can solve this problem and continue the installation.
Thanks in advance for your reply and support.
Kind regards,
Rik HutHi,
Choose option Accept non-severe errors and repeat the phase. Because sometimes in ACT_UPG phase it tries to activate some obsolete object and get stuck.
Thanks
Sunny -
[SOLVED]Setting the profile option:OPP Response Timeout to a higher
hi frs,
while running report getting error like
Beginning post-processing of request 410882 on node USAORF01 at 10-JAN-2006 11:45:17.
Post-processing of request 410882 failed at 10-JAN-2006 11:50:18 with the error message:
The Output Post-processor is running but has not picked up this request.
No further attempts will be made to post-process this request, and the request will be marked with Warning status.
Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary.
i found a document on metalink docid: 352370.1
in doc they have given like RESTART 'Output Post Processor' so that problem can be solved.
how much time it will take to restart the 'Output Post Processor'.
'Output Post Processor' is based on any level like site or user or responsibilty.
pls help in understanding about 'Output Post Processor'.
Thanks
Rajesh
Message was edited by:
Rajesh.maniWe typically set this to profile to NO in production instances, unless troubleshooting an issue - it is then set at an appropriate level (USER or RESP etc) temporarily.
We have not found any performance issue when setting this in non-production instances.
MOS Doc 275876.1 - Oracle Application Framework Profile Options Release 11i (11.5.10)
HTH
Srini -
I need to set up Profile Manager on a completely closed network that has no Internet access at all. I can sneaker-net files into the network if I need to.
Profile Manager (and Lion Server in general) seems to need outside access to complete setup and I've been unable to find any meaningful answers.
Does anyone any any ideas?
Thanks to allyou could try it without enabling apple push notifications in server
you wont' be able to push out profiles without enabling apple push notification
but users could download them, or you could install manually, e-mail etc -
Error While Setting Task Display - 11.1.1.4
Hi,
I have associated an ADF form with a human task. I can see the task, but the ADF screen doesnt show.
java.lang.NullPointerException
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.
setTaskDisplayInfo(TaskFlowPropsUtil.java:769)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:261)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.run(TaskFlowDeployerThread.java:129)
at java.lang.Thread.run(Thread.java:619)
<Feb 3, 2011 1:46:24 PM IST> <Warning> <oracle.soa.services.workflow.worklist> <
BEA-000000> <<.> Error while setting task display, this can happen with app load
ing issue, trying to load for 11>
I understand that previous fixes involved setting the adf-config file. I have done this by going into the domain directory... but no joy.
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config">
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mstore-usage_1" path="/apps"/>
<namespace metadata-store-usage="mstore-usage_1" path="/deployed-composites"/>
<namespace metadata-store-usage="mstore-usage_1" path="/soa"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage id="mstore-usage_1">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property value="DEV_MDS" name="jdbc-userid"/>
<property value="welcome1" name="jdbc-password"/>
<property value="jdbc:oracle:thin:@//localhost:1521/xe" name="jdbc-url"/>
<property value="soa-infra" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
This is 11.1.1.4 Soa Suite.
Thanks and regards.
AnandI had a similar issue, but it was after my application was automatically converted by JDEV from 1.1.1.3.
Perhaps others have determined how to fix the application and projects after the conversion, but I recreated everything in 1.1.14 and this seems to work. -
Error in setting SecureRMIClientSocketFactory.
I am working on an application from a vendor that requires me to use JRE version 1.5.0_14 on my client PC with MS IE 7.0. I have this application configured to use SSL for HTTPS per the procedure the vendor requires on their server. When I attempt to launch their application using HTTPs, then it launches JRE. I get the login window then it tries to connect to the Java application then I get the error "RMI connection unavailable between client and serer possibly due to port 1099 conflict". I have made sure all firewalls that we have are ok for ports 1098 and 1099 for RMI.
I get the following from the Java console output when I try to get in via HTTPS:
Error in setting SecureRMIClientSocketFactory.
java.net.SocketException: factory already defined
at java.rmi.server.RMISocketFactory.setSocketFactory(Unknown Source)
at com.acme.launcher.AcmeCustomClientFrame$3.run(AcmeCustomClientFrame.java:469)
The interesting thing is that when I configure the server to use HTTP I have no issues with JRE and RMI. I cannot find anything on the web that tells me anything about the SecureRMIClientSocketFactory and the factory already being defined.
Can anybody please help me on what the issue may be here ?
Thx
Larryfrom root try this command
umask
umask must set at 0022 ... if your server not set at this number use this command
umask 0022 -
Error in setting Pricelist/Currency code
I'm using Siebel Self-Services 8.1.1 and I always get the following error every for new session of the application:
"Error in setting Pricelist/Currency code. Please contact System Administator".
Anyone having an idea how to solve it?
Thanks!
/Jon-ErikHi Jon,
Check the web service request and response in log immediately when you get this error.I think some setting at Siebel side needs to be done.
Vikram -
Hi,
On installing Oracle 9.2 on RedHat Linux release 4, I encounterd the
following error:
Error in setting permissions on file/directory
$ORACLE_BASE/jre/1.1.8/LICENSE
This error is encountered at the inital stage of installation after inputing all the
required settings in the OUI. and at the Installing Java Runtinme Environment 1.1.8.1.0
Could someone tell me why it happened and how to fix it? Your help is
much appreciated.
There was a post on this topic only in here and said to change the permissions of the
ORACLE_BASE .......... I have tried out all these and all the permissions and the environment settings are correct but i'm not able to proceed with the installation even after a lot of trying.
All you guys help is verry verry appreciated..........
Thanks,Do the following and post the results:
cd $ORACLE_BASE
pwd
ls -al
cd jre
pwd
ls -al
cd 1.18
pwd
ls -alI can't imagine anyone making recommendations without seeing what you've done. -
Error in setting permissions of file/directory
This is the error I am getting
Error in setting permissions of file/directory /u01/app/oracle/jre/1.1.8/bin/i686/native_threads/.extract_args
I am running RedHat 9 and obviously installing 9.2.0.
Any ideas on why I might be getting this. I have set permissions for the oracle user for this directory.
Thanks
Davefrom root try this command
umask
umask must set at 0022 ... if your server not set at this number use this command
umask 0022 -
Error in setting permissions of file/directory /home/oracle/jre/1.1.8/LICENSE ! Installation problem of 9i databse on redhat 7.3!!I installed sun jdk 1.3 or jdk 1.1.8_v3 and created a link for /usr/local/java !
from root try this command
umask
umask must set at 0022 ... if your server not set at this number use this command
umask 0022
Maybe you are looking for
-
[SOLVED] Xorg 1.6 with intel graphic corruption
Hi Arch community frequently the part of graphic corruption in any application, see screenshot: this fix (depend) when refresh section, or move mouse over this. I have: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Contro
-
Apple store advised me to purchase a VGA splitter to run two external monitors on my MBP. I connected the VGA splitter to the VGA adaptor and then to two external monitors. They both work but they are mirrored. ie, I still have only one external moni
-
The above message is what I get when i try to back up my iPhone 4s to my PC. I tried deleting the backup through Edit > Preferences and so on, but I still get the same message! How can I get rid of this message and backup my iPhone? It worked fine tw
-
Commitment Value after partial GR
Hi All, Anybody have idea for below given scenario. Query on Commitment cost Eg: PO issued with cost of 1M USD. Based on current rate of 1.3, Commitment shows in local currency 1.3M SGD 6 months later, 80% of PO can be GR. 80% *
-
I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?