Error in settings for report ME52

Hi Experts
In MB52 report we are getting all values as 80.000   70.000    333.000 and so on
But user donu2019t want this integer to follow the number
He want as 80   70   333
How to make this settings , please help
Thanks in Advance
Prashanth

Hi,
Check this link:[   How to remove decimal places|How to remove decimal places]
Rgds
Utsav

Similar Messages

  • Error : Pre Settings for IDoc inbound processing are missing error

    Hi Experts,
    There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
    Thanks in advance.
    Madhurima.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    [iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

  • Again "Error reading settings" for wiki on OS X Server 10.8

    I tried everything I found on the web but still getting the "Error reading settings" for the Wiki of OS X Server for Mountain Lion.
    The postgresql service is running and responding. But still I believe it's a postgres problem.
    I tried the "remove Server.app -> remove /Library/server -> reinstall Server.app" but it doesn't change anything: wiki "Error reading settings".
    Is there a way to reset the built-in postgresql of OS X Server? What about the hidden users (e.g. _postgres) - which of them are required for the
    postgresql and how do I see if they all do well?
    Any ideas?

    I feel the exact same way ... i have read everything i can find on here and through Google ... tried it all. nothing has worked

  • "Error Reading Settings" for my Airport Extreme

    When I installed Server everything worked fine.....until I exposed sevices in Airport using the Server Admin App.  I did everything it asked ie. passwords etc., now when I open the Server app I get an error msg saying   "An error occurred on the server while processing a command.  type 'getIGDPortmaps' in plug-in 'servermgr_network'. "
    I went into Airport Utility and everything seemed to be working correctly.  Port mapping was checked and the services were mapped.  The setup I have is 1 Airport Extreme connected to Server by ethernet with Tunneling enabled through internet options.  Then I have 2 Airport Express' extending the network and those are set to "Local link only".
    My question is....could I have double Port Mapping happening somehow?  and how do I fix it so everything is handled through Server Admin App?
    Thanks for the help!

    Weel i am sorry but i do not have a solution.
    Yet i have a similar problem.
    I mean my Upgrade went very well, but Server App asks me to type the password ofmy airport extreme, but all the times did not work.
    Thus i decided to reset the airport extreme. All connections works great, but Server App needs the password. Once again i type it but there is an error, as if the password was uncorrect.
    Now if i do not fix this issue i cannot use my server because i cannot connect to it.
    Thanks for the help
    Dona

  • Correct JavaScript Error Detect Settings for Acrobat X

    Can someone tell me what the JavaScript preference settings should be on Acrobat X so Acrobat will detect errors/problems in my JavaScript scripts?
    Thanks

    Thank you. This is very helpful.
    But i do not understand what to do =/
    What i think:
    Create a insertPages.js in C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Javascripts
    Content of insertPages.js:
    this.insertPages(
    {nPage: 0,
    cPath: "///eukexsrv/Vorlagen_Prod_Auftr_PDF/Produktionsauftrag Deutsch.pdf",
    nStart: 0,
    nEnd: 13
    Then open the PDF file and Add a button which runs the insertPages.js
    -> HOW?
    I can't see any option to run a script from mouse up
    Also i get an error while opening acrobat:
    TypeError: this.insertPages is not a function
    7:Folder-Level:App:insertPages.js
    Edit:
    i edited my insertPages.js:
    function inpa () {
    this.insertPages(
    {nPage: 0,
    cPath: "///eukexsrv/Vorlagen_Prod_Auftr_PDF/Produktionsauftrag Deutsch.pdf",
    nStart: 0,
    nEnd: 13
    And in the button i made Mouse up -> javascript
    Code:
    inpa();
    Now i get this message:
    NotAllowedError:Security settings prevent access to this property or method.
    Doc.insertPages:8:Field Produktionsauftrag dt:Mouse Up

  • Error with FOP for Report Printing in Apex 3.2.1

    We are trying to use FOP deployed onto GlassFish Community but after setting up as described in the applicaton express guide to allow report printing; we are getting the following error
    'package oracle.xml.parser.v2' does not exist
    We are running GlassFish on Debian 5.0 (Lenny)
    Any help appericated :)

    Here is what I did to get it to work.
    1. Copy xmlparserv2.jar from my ORACLE_HOME/oc4j/lib directory to my glassfish domains/domain1/applications/fop/WEB-INF/lib directory.
    2. Added the following two lines to the glassfish domains/domain1/fop/apex_fop.jsp before the driver.run() line
    out.clear();
    out = pageContext.pushBody();The second part of solution I found on another forum page.

  • Error Deploying ear for reports

    Hi,
    I'm getting this error when I try to deploy an ear related to reports using the dcmctl deployApplication command.
    The command used is as follows:
    . dcmctl deployApplication -f /home/oracle/deploy/reportreq.ear -a /reportreq -co OC4J_BI_Forms -v –d
    I'm executing this command in the following path:
    --> /app/oracle/product/9iAS/90201/dcm/bin/
    error start
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:Error initializing userManager 'oracle.security.jazn.oc
    4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unabl
    e to retreive the specified realm(s).)
    co OC4J_BI_Forms -v -d <
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    Nested exception
    Root Cause: Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    java.rmi.RemoteException: Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1572)
    at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1525)
    at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:53)
    at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
    at __Proxy0.deploy(Unknown Source)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.deployOnSingleInstance(LocalDeploy.java:245)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.doExecute(LocalDeploy.java:160)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.RuntimeIf.execute(RuntimeIf.java:109)
    at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.doEvaluateDeploy(DeploymentAdapter.java:837)
    at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.evaluate(DeploymentAdapter.java:272)
    at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(TaskMaster.java:1217)
    at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(RemoteEvaluate.java:25)
    at oracle.ias.sysmgmt.task.DaemonWorker.run(DaemonWorker.java:79)
    error end-
    Any help in this regard would be highly appreciated.
    Thanks,
    Nikhila

    Hi,
    I'm getting this error when I try to deploy an ear related to reports using the dcmctl deployApplication command.
    The command used is as follows:
    . dcmctl deployApplication -f /home/oracle/deploy/reportreq.ear -a /reportreq -co OC4J_BI_Forms -v –d
    I'm executing this command in the following path:
    --> /app/oracle/product/9iAS/90201/dcm/bin/
    error start
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:Error initializing userManager 'oracle.security.jazn.oc
    4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unabl
    e to retreive the specified realm(s).)
    co OC4J_BI_Forms -v -d <
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    Nested exception
    Root Cause: Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    java.rmi.RemoteException: Error initializing userManager 'oracle.security.jazn.oc4j.JAZNUserManager': oracle.security.jazn.JAZNInitException (The system is unable to retreive the specified realm(s).)
    at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1572)
    at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1525)
    at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:53)
    at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
    at __Proxy0.deploy(Unknown Source)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.deployOnSingleInstance(LocalDeploy.java:245)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.LocalDeploy.doExecute(LocalDeploy.java:160)
    at oracle.ias.sysmgmt.deployment.j2ee.runtime.RuntimeIf.execute(RuntimeIf.java:109)
    at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.doEvaluateDeploy(DeploymentAdapter.java:837)
    at oracle.ias.sysmgmt.deployment.j2ee.adapter.DeploymentAdapter.evaluate(DeploymentAdapter.java:272)
    at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(TaskMaster.java:1217)
    at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(RemoteEvaluate.java:25)
    at oracle.ias.sysmgmt.task.DaemonWorker.run(DaemonWorker.java:79)
    error end-
    Any help in this regard would be highly appreciated.
    Thanks,
    Nikhila

  • Error in PB60 "Settings for word processing system are wrong"

    Hello Everybody
    I am working on recruitment,
    i have create applicant activity in SPRO, but when i was going to create applicant activity PB60 maintain and entering the personal number the error display " "Settings for word processing system are wrong"
    then i check feature set word  processing system.
    plz anybody guide me how to resolved this problem
    thanks
    urvashi

    Hi Urvashi,
    Please check the following in your system:
    - Go to PE03
    - feature 'WPROC'
    - select 'Attributes'
    - press 'Display'
    - press 'Struct.'
    - there you will find the Basic information 'Passing type'
      This must be set to '2' (Table Transfer). If this is set
      to '1' i.e. please change this entry.
    Hope this help
    Sarah

  • Error in short pay report generation

    Hi
    We run reports for review of customer short pays which are set up as an SAP Query in specific user groups
    These reports lists short pays for one type of customer groups. The issue I am facing is that the report is adding individual lines to be able to get the CSR identified. So the # Days open is added and then I have the Avg selected in the query. I only want the average column which would take the addition of each line on the order and then divide by the # of lines. I have the same problem with short pays and average values.
    This error is seen for reports which have invoices not the ones without invoices.
    Firstly I wanted to know where to address this issue using report painter transaction  GR22 or using the SA38/SE38 editors.
    Any ideas as to how to solve this would be greatly appreciated.
    Edited by: sapsap10 on Aug 19, 2010 7:45 PM
    Edited by: sapsap10 on Aug 23, 2010 8:49 PM

    Hi,
    Please provide some sample data to explain you issue. Youe requirement is not very clear.
    Regards,
    Gaurav

  • HT200088 Error Reading Settings in Lion Server Profile Manager

    Whenever I try to use Profile Manager in Lion Server, it says "Error Reading Settings". Can anybody help?

    I did a clean install of Lion/Lion Server, but I ran ino the same problem too with "Error Reading Settings" for both the profile manager and the wiki.
    INVESTIGATION: I checked to see if the postgres database (which I presumed was were the settings were being read from).
    # sudo serveradmin fullstatus postgres
    postgres:dataDirHasBeenInitialized = yes
    postgres:PG_VERSION = "9.0.4"
    postgres:dataDir = "/var/pgsql"
    postgres:postgresIsResponding = no     # !!! why isn't it responding???
    postgres:dataDirIsDirectory = yes
    postgres:PGserverVersion = 0
    postgres:dataDirExists = yes
    postgres:setStateVersion = 1
    postgres:state = "RUNNING"
    PROBLEM: The postgres service hadn't been started properly; I found this by doing the following:
    # sudo serveradmin stop postgres
    postgres:state = "STOPPED"
    # sudo serveradmin start postgres
    postgres:error = "CANNOT_START_SERVICE_TIMEOUT_ERR"
    FIX: The postgres service couldn't create the log file because it didn't have permission. I did this to fix it, then simply restarted it and all was well:
    # sudo chmod 777 /Library/Logs/
    # sudo serveradmin start postgres
    postgres:state = "RUNNING"
    I hope this helps someone.

  • Error reading settings in wiki and profile manager

    I have just upgraded from Snow Leopard Server to Lion server.
    I now have the following errors in server app:-
    Wiki : message "Error Reading Settings"
    Profile Manager: message  "Error Reading Settings"
    What do I do to get my wiki back!
    When I visit my default ssl Wiki I get the following:-
    Collaboration::PGCConnectionError in Sources#index
    Showing /usr/share/collabd/coreclient/app/views/layouts/application.html.erb where line #5 raised:
    FATAL:  role "collab" does not exist
    Extracted source (around line #5):
    2:      :user => @user,3:      :entity => @entity,4:      :owner => @owner,5:      :service_client => service_client,6:      :controller => controller7: }) %>8:
    Rails.root: /usr/share/collabd/coreclient
    Application Trace | Framework Trace | Full Traceapp/controllers/application_controller.rb:325:in `service_client'app/views/layouts/application.html.erb:5:in `_app_views_layouts_application_html_erb___1616978790_2215846900_0'app/controllers/application_controller.rb:44:in `render_server_error'app/controllers/application_controller.rb:43:in `render_server_error'
    Request
    Parameters:
    None
    Show session dump
    Show env dump
    Response
    Headers:
    None
    Please help

    I did a clean install of Lion/Lion Server, but I ran ino the same problem too with "Error Reading Settings" for both the profile manager and the wiki.
    INVESTIGATION: I checked to see if the postgres database (which I presumed was were the settings were being read from).
    # sudo serveradmin fullstatus postgres
    postgres:dataDirHasBeenInitialized = yes
    postgres:PG_VERSION = "9.0.4"
    postgres:dataDir = "/var/pgsql"
    postgres:postgresIsResponding = no     # !!! why isn't it responding???
    postgres:dataDirIsDirectory = yes
    postgres:PGserverVersion = 0
    postgres:dataDirExists = yes
    postgres:setStateVersion = 1
    postgres:state = "RUNNING"
    PROBLEM: The postgres service hadn't been started properly; I found this by doing the following:
    # sudo serveradmin stop postgres
    postgres:state = "STOPPED"
    # sudo serveradmin start postgres
    postgres:error = "CANNOT_START_SERVICE_TIMEOUT_ERR"
    FIX: The postgres service couldn't create the log file because it didn't have permission. I did this to fix it, then simply restarted it and all was well:
    # sudo chmod 777 /Library/Logs/
    # sudo serveradmin start postgres
    postgres:state = "RUNNING"
    I hope this helps someone.

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

    Hello,
    As you can tell from the title of this question, I am no expert with GPO's.  Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb".  While
    I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already.  That is not necessarily my case and I would ask for a
    little patience and a bit of 'hand-holding' for what I need.
    I run SBS 2011, and in Group Policy Management I have a custom GPO.  In this GPO I define all my settings.  I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings.  This
    policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03.  That may be the issue, but before making any changes I am seeking expert advice.
    When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
    I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified.  I see that my option for the location is set to "Default"
    which by my guessing would be located in the C:\Windows\sysvol directory.  Below is what I see there:
    C:\Windows\sysvol\domain
    C:\Windows\sysvol\staging
    C:\Windows\sysvol\staging areas
    C:\Windows\sysvol\sysvol
    I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
    But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
    To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry.  I searched my server for
    that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
    If I am correct with my assumption and basic knowledge, I should move all objects as follows:
    -Move FROM: C:\Windows\sysvol\domain\policies
    -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether. 
    Thank you for anyone's help and time with assisting me with this request.
    John Fester

    > top "Settings" I see the error: "An error occurred while generating
    > report: Object reference not set to an instance of an object."
    That's due to a security setting (most possibly) your current OS does
    not understand. Hard to find out wich exact setting it is... To resolve
    this issue, we need the gtpptmpl.inf file residing in the policiy's
    sysvol folder. To open this folder, edit the policy, move to computer
    settings - policies - windows settings - scripts - startup, press "show
    files". Then move two folders upwards and back down to
    .\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
    its contents and we'll have a look at it.
    > location, which I speculate is: C:\Windows\sysvol\domain\policies (which
    > folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
    That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
    > all objects as follows:
    > -Move FROM: C:\Windows\sysvol\domain\policies
    > -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
    No.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

    After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
    The system logs reads:
    Mar 29 22:06:25 server servermgrd[82]: servermgr_web:  Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
              undefined method `downcase' for nil:NilClass
              ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
              undefined method `downcase' for nil:NilClass

    To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
    sudo changeip -checkhostname
    That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect.  That doesn't catch everything, but it catches the common errors.
    FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

  • Error while generating the report on Test env (for divide condition)

    Hi All,
    I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
    Actually the error is coming for the below logics:
    COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
    "RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
    Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
    Thanks in advance

    Is anyone having any idea about it...

Maybe you are looking for