Error in setup on upgrade

I have Flash MX. I bought CS3 upgrade. I try to install it
and when it gets to the first window that says "Loading Setup...",
I get an error message:
"Critical errors were found in setup - Session has
dependencies that cannot be satisfied. Please see the Setup log
file for details."
That's it! It doesn't tell me WHERE the log file is, but why
is this error even coming up in the first place? Anyone got any
ideas?

No context (which country are you running payroll, what support package are you using etc.) so just a quick shot:
Note 1308040 - Imported B2 version does not match the current B2 version
Markus

Similar Messages

Can't get my desktop PC Win7 MS Ofc 2010 calendar, contacts, tasks onto iCloud. Get error message: Setup cannot start because of unexpected error". Laptop Win8

I have a desktop PC Win7 with MS Ofc 2010. I have iCloud on Macbook, Laptop Win 8 with MS Ofc 2013, iPhone synched. I cannot get iCloud to accept the Outlook, Calendar, Contacts, Tasks with checking the box and starting the upload.
Error Message: Setup cannot be started because of an unexpected error. Should I delete iCloud and reload and try again? What are suggestions from the community? Sent report to iCloud.

Hi Clifford,
Take a look at the article below, it provides tips that should help you resolve the iCloud setup issue.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Symptoms
After installing or upgrading to iCloud Control Panel 3.0, iCloud setup cannot complete.
Resolution
You may see one of several messages. Your troubleshooting steps will differ depending upon the message:
“Your setup couldn't start because your username or password is incorrect. Go to the iCloud Control Panel, sign out, and sign back in.”
Click Cancel to close the message.
Click "Sign out" on the iCloud Control Panel.
Reenter your Apple ID and password, then click Sign in.
“Your setup couldn't be started because the iCloud server stopped responding.”
or “Your setup couldn't be started because the iCloud server couldn't be reached.”
Check the System Status page to make sure there aren't any issues affecting the settings you've chosen in iCloud Control Panel. If you are setting up iCloud for use with Outlook, check that there aren't any issues with Mail, Contacts, Calendars, or Reminders.
Make sure your computer is online. In a browser, attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud contacts, calendars and tasks cannot be added to Outlook. If you're using Windows 8, review the instructions for resolving network problems. If you're using Windows 7, review the instructions for troubleshooting internet connection issues.
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
-Jason

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

SCCM 2012 R2 SQL Database Upgrade Fails : Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.

Hi Friends,
We have planned to upgrade our SCCM 2012 SP1 infrastructure to SCCM 2012 R2 so we have setup test environment to test SQL database upgrade before doing same in production.
But while testing SQL database upgrade on test machine, it is getting failed with below error.
ConfigMgrSetupWizard.log
ConfigMgrSetupWizard Verbose: 1 : Scripted setup failure handling callback called. Failure: 29.
ConfigMgrSetupWizard Verbose: 1 : Received error [Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.] from native code.
ConfigMgrSetup.log
ERROR: SQL Server error: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'ContentDistribution_PK'. Cannot insert duplicate key in object 'dbo.ContentDistribution'. The duplicate key value is (921). :
tr_ContentDistributionNotification_insert
ERROR: Failed to execute SQL Server command: ~-- ~-- Rebuild ContentDistribution tables ~-- ~IF (EXISTS(SELECT TOP 1 1 FROM dbo.SMSData WHERE SMSBuildNumber <= 7900) AND dbo.fnIsSecondary() != 1) ~BEGIN ~ exec spRebuildContentDistribution
@TruncateTables=0 ~END
Failed to create process of SetupWpf.exe.
Can anyone please help to get this resolved.
Thanks.

We found out that there were duplicate entries in the PkgStatus_G and the PkgServers_G tables in the SCCM DB. We identified them, deleted them , and then we were able to run the /TESTDBUPGRADE command and it went through fine. We performed
all of this on a COPY of the PROD DB and then moved the changes in PROD. Hope this helps someone.
- Dave

Windows error message "Setup could not read the CD you inserted..."

I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?

Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.

Installing J2SE v1.4.2_05 JRE "error reading setup initializing

I have a customer who just updated their OS on their computer from Windows 98 to XP and now they are trying to download the J2SE v1.4.2_05 JRE version of Java. In the installing process it gives them this error: "error reading setup initializing" Any suggestions as to what is going on? And how to fix it? Thanks!

SunForumsGuest wrote:
On windows there are two available installers.
Windows Offline Installation, Multi-language (j2re-1_4_2_05-windows-i586-p.exe, 14.91 MB), and the online installer: Windows Installation, Multi-language (j2re-1_4_2_05-<font face="tahoma,verdana,sans-serif" size="1" color="#000">windows</font>-i586-p-iftw.exe, 1.35 MB) .
In some situations, it may be necessary to use the first (larger) one, which (Ibelieve) includes the MSI installer., which usually will already be on an XP machine, but may not be ion an upgraded Win98 machine ?
(just a guess)
/DietzNow I got it, Thanks for your effort!

Upgrading to ISE 1.3 error ISE Global data upgrade failed!

HI,
Has anyone come across this issue? when upgrading, it seems to start all well but then this happens:
- Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
Rolling back the configuration database...
Starting application after rollback...
% Error: The node has been reverted back to its pre-upgrade state.
% Application install or upgrade cancelled.
I've also upgraded it to the latest patch and tried again but to no avail. This is an appliance (3415) that came shipped with 1.2. It's not been configured other than the initial cli wizard. I've upgraded a fair few appliances but I haven't seen this issue come up before. Any thoughts?
Thanks in advance for any info...

If this is a test setup then you can do fresh ISE install.back up existing config and restore it to 1.3. If its production then contact TAC

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.Main

Hi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com

I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
[ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
http://sourceforge.net/projects/kernelex/

Error while doing EHP4 upgrade in downtime phase

HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.

Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error reading setup initialization file

I am trying to download and install
J2SE v 1.4.2_04 SDK and
J2SE v 1.4.2_04 JRE
on a Windows XP platform SP1. The machine is a dual XEON 3.0 G machine with 1G of memory.
I downloaded the software and saved it to my desktop. When I double clicked on either application I get a dialog box with the following message...
"Error reading setup initialization file"...This message appears in a dialog box with no header and no lettering in the button to dismiss the dialog box.
I tried looking through the forums and contacting SUN without any success....Can someone help me?

Update to previous post
I found the source of the error. Either the firewall server or proxy server that our site is using had altered the file. Both servers do some type of 'content' filtering for viruses, etc. To confirm this, I downloaded the file while at another site and then compared the two files. There was differences between the two files. The alteration wasn't enought to completely break the executable, but enough so that InstallShield couldn't run properly.

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
>

Error in setup on upgrade

Similar Messages

Maybe you are looking for