Error in SICK or SM28

Hi All,
I had restore my data in test server. But when I check the status in t.code SICK or SM28, I am gettgin error as follow.
" can't establish connection to message server on zybiwprd (sapmsZEP). evere problems were detected during initial system check. Please, do not use that system before fixing these problems."
Please help me how to solve this problem.
Regards,
Nisit

As per your query please check dispatcher status. your any work process is not working also check your oracle services all services should be in aut mode
@Anil--I don't think your answer is relevant to original post, user is trying to execute SICK (SM28) means already he is logged in.
Regards
Nick Loy

Similar Messages

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

I want my old iTunes back, I am sick of uninstalling and reinstalling this new version. I just need my apps for my new iPhone6

how can I just get my old itunes back. I am not going to continue uninstalling and reinstalling the new version. I had it on my computer, and for some reason it crashed and I started this commotion. I have uninstalled and reinstalled with the help of Fix It and advice from many people. Every time I get a new error. Sick to death of it. I only need it to sync my apps to my phone and to use iCloud.
If anyone can get me back to some other version that I can use, I would really appreciate it.
I have Windows 7 on my PC

If you really want to roll back to 11.4 uninstall all iTunes/Apple components, restore the pre-upgrade version of the library as described inEmpty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
If you have trouble uninstalling or reinstalling see Troubleshooting issues with iTunes for Windows updates. The same tip should help you get iTunes 12 installed properly if you want to give it a try.
tt2

Kernel patch

Hi team,
Here iam applying Support package SAPKB70014. I have applied the support packages from SAPKB70007 to sapkb70011. but when iam applyin the support package SAPKB70014, it gives me an information saying that " SAPKB70014 REQUIRES KERNEL RELEASE 700 AND PATCH NUMBER 0133.".I have cheked the kernel it is release 700 and patch level 111.
Can some one assist me how to apply kernel.
Now my patch level is 111. now to bring it to 133 schould i apply in all the patches consequently which are coming in between 111 and 133(112,113,...).Iam very new to apply kernel. some one kindly assist. this issue is very urgent . Instant replywill be appreciated.
Thank you.

HI Everyone,
Kernel upgradation is done to increase the run time performance of the system. It contans 3 types of executables, OS,DB,SAP. Mainly kernel upgrade is done for latest update version of TP, R3trans,disp+work,Dpmon, saposcol.
While we are starting a sap system sapcpe.exe is trigerred & strdbs.cmd , Msg_server.exe & disp+work.exe when these executable s are of latest release it will increase the run time performance of the system. After installation when we execute SICK or SM28 it will check the consistency between OS DB & R3 executables
First you need to Navigate to Download / Support packages & Patches / Entry by Application Group / SAP Application Components / SAP ERP / SAP ERP 6.0 / Entfy by Component / SAP ECC Server /
SAP Kernel 7.00 <Version you need>
Check whether the Unix is 32 bit or 64 bit operating system and download the relevant
kernel from the Service Marketplace.
Download the Database depenedent and Database independent packages.
Download below files
SAPEXE---.SAR -DATABADE INDEPENDENT
SAPEXEDB---.SAR -
1. Intimate users that the SAP system is going down for maintanence using SM02
2. Stop R/3 system and Database
3. First stop Application Servers using command "Stopsap <Host_name> and then stop the central instance
4. Stop the SAP and DB services that are using the kernel files like saposcol should stop as sidadm user
and oracle listener should stop as orasid user.
5. Log on to the server and take a backup of existing Run directory.
6. Uncar the files using the command SAPCAR -xvf <file_name> in a tmp folder where it is copied.
7. Copy the new uncared files to the directory /usr/sap/<SAPSID>/SYS/exe/run. directory and
check for the latest version thru disp+work command login trhu <SIDADM>, latest should be reflected.
8. Now restart the R/3 system (first central instance, DB and then application servers) .
9. Now check the system is running fine thru TA SM21, DBACOCKPIT, SICK, ST22, SM11,etc.
Regards

System copy from SQL2000 to SQL2005

Hello All,
We are trying to perform a homogenous system copy. Our source system is SQL 2000 and the target system is SQL 2005. We followed the normal attach/detach procedure and ran the STM tool for the database copy. After bringing SAP online, it gives an consistency check error in SICK - "Wrong long datatypes. Perform SQL2005 after upgrade steps. Please see note 126973."
This note in turn refers to note 799058 which describes the procedure of upgrading to SQL 2005 and homogenous system copy. But we have already done that. Can somebody please help me on this and let me know what I am missing.
Thanks,
Fahad

Hi,
SICK generally gives error for Kernel issues. Perform a kernel upgrade.
Do not forget to download the latest DB dependent files for MSSQL 2005
And let us know how it goes.
Regards,
Siddhesh

RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS

Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error
    Long text of error message:
    Technical information about the message:
    Message class....... "HRTIM00BUFMSG"
    Number.............. 001
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Information on where terminated
    Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
     "INITIALIZE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 55
    of the (Include) program "LHRTIM00_TMWBUFFERCB5".

When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
      1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
      2. Have an ABAP programmer review where the RFC is failing on the Backend System
      3. Set up an External Breakpoint in the backend RFC. Step to do this:
               a. Get the Backend UserID of a test portal user that is having this issue.
               b. Ensure that test user has "Debug Display" access in the Backend System
               c. Log into the Backend system, go to SE 37 and display your RFC
               d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
               e. Set an external breakpoint any where you want in the RFC.
               f. Run the Leave request as the test user.
               g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom

Disk is too slow (Record)(-10004) error..so sick of this.

Hello all,
I can no longer record more than three tracks in logic without getting the error message "Disk is too slow (Record)(-10004)". When this happens, recording is stopped.
At first I suspected my drive was faulty, maybe slowing down. So being in the middle of a session that took me 2 hours to set up, I called for a break and rushed off and bought an external Seagate 7200rpm firewire 800 drive. I installed it and set it as the recording path for the project. There was no change, the same error occured.
I then switched the target drive to another internal one I use for Time Machine - same problem occured.
It seems to me that this problem has nothing to do with my drives. I am at a loss to explain it. I have looked for hours online for a solution but while many have experienced this there seem to be few answers out there.
Unless I find a solution this will be my last project with Logic. I tried and tried for the last 5 years to use this program but things like this keep happening. It's glitchy with UAD cards, Duende, RME interfaces, Midi controllers, Hard Drives, RAM and external clocks. I've had problems with them all over the years. I will most likely switch to Cubase which I feel is inferior for editing and loops, but at least it seems to be stable.
If anyone has any insight I'll try and fix it, but I just can't keep shelling out money for a program that just doesn't work.

I am experiencing a similar problem & have been receiving the same messages, even while recording as little as one track and playback has become an issue as well. However, THIS WAS NOT ALWAYS THE CASE. I have heard of people with this same problem, where they receive this message out of nowhere after logic has been working perfectly for them.
I also would like to note that I am running all settings in logic for optimized recording and playback (audio & buffer settings etc etc etc)
THIS IS NOT A HARDWARE ISSUE, at least in my situation as I am running a fast internal HD & have ample memory. Please reach out if you feel like you have a pragmatic solution to this issue.
This may be a possible lead on the fix... I remember reading this post from a user "soundsgood" in 2008 who was having a similar issue..I don't understand completely his solution, but if someone could enlighten me, I feel that this might be the solution to our issue
+"Okay - forgive me 'cause I'm a newbie on this forum and if somebody else has already figgered this out, I'm sorry.... I've been having the same problem all of the sudden after many years of crash-free and error-free recording. I've read everything. I've pulled my hair out. I've done dozens of clean installs. I've repaired permissions so many times I can do it blindfolded. And sitting here tonight, it dawned on me.... there are TWO places Logic is sucking data from: wherever you've got your SONG files stashed, of course.... but it ALSO NEEDS TO ACCESS THE STARTUP DRIVE (or wherever else you might have your Apple Loops installed). I was watching my drives being accessed during a playback of a fairly complicated tune (most tracks were frozen of course), and both of the afore-mentioned drives were going berserck with accesses. We're all focusing on our dedicated audio drives, but forgetting about our boot drives (where Logic usually resides along with most or all of our loops). I carbon copy cloned my boot / operating system (including Logic) to a different (in my case, an external firewire) drive and the problem disappeared. Could've been because the cloning process de-fragged all the loops & stuff, or maybe my OS just likes snatching its sample/loop info from an external drive. Worked for me... so far....... let me know if it works for others....."+

Im sick to death of this error 3194

I've tried everything possible, look at a million youtube vids, ALOT of guides to fix this but NOTHING works.. i ALWAYS get the same error(3914) when trying to update/restore my iphone. its really frustating me now.
(trying to update my ipod from 4.3.2 -> 5.1.1 and no i do not want 6.0+
Can someone please tell me other ways to fix this, otherwise just wasted $500
Thank you.

Apple only supports going to the latest iOS for you device when you restore or update. For the iPhone 3GS and later that is iOS 6.1.3. If you try to go to an earlier iOS you get the error you are receiving.

Error saving job to database

Hi,
In IDES ECC6.0 Ehp 3 (Os: window 2003 64bit DB: oracle 10.2.0.2) server when iam goto T-Code -- SM36 -- Standard Jobs -- Default Scheduling iam getting below error.
<error saving job to database>
So I patched oracle 10.2.0.1 to 10.2.0.4, and kernel patch with latest one.
But, the same error occured.
I tried to execute r3trans -d at the OS level,the results is <The system cannot execute the specified program>.
In SM21, i am getting below error
<error saving job to database>
&CAUSE &
The SAP system was unable to save the current job in the database. This failure suggests that there is a problem with the database system or with the network connections between the SAP application servers and the database system.
&SYSTEM_RESPONSE&
Job not saved and not scheduled.
&What_TO_DO&
To analyze this problem, start by checking the <DS:TRAN.SM21>system log for message about network or database problems. you can also use the <DS:TRAN.SRZL>computing center management system to check your system for problems. >
I checked SM28 and SICK and it reports no error.
Please help how can I schedule the standard jobs

Make sure you use the proper kernel, for 64bit there are two kernels:
- one for AMD64 and Intel64
- one for Itanium-2 64bit
The R3trans seems to be the wrong one - as I would suggest are the brtools.
Markus

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Error while opening central admin link after power pivot uninstall sp 2010?

Error while any link opened in the cental admin
example:http://server:port/_admin/WebApplicationList.aspx
Required permissions cannot be acquired.
ULS log when Config wizard ran
An exception of type System.IO.FileNotFoundException was thrown. Additional exception information: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
   at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName)
   at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)
   at Microsoft.SharePoint.PostSetupConfiguration.ReflectionHelper.InvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters)
   at Microsoft.SharePoint.PostSetupConfiguration.TaskCommon.ReflectionHelperInvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters, TaskBase task)
the error same as the below article:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7a06ebc8-ad8f-4b76-bc44-a8171fde6816/absolutely-sick-of-powerpivot-the-product-stinks-failed-to-find-assembly?forum=sqlkjpowerpointforsharepoint
but any of the sollution did not work.
Thanks
Ravi
Ravi

I have uninstalled power pivot now the central adminlinks are working.
but when i run configuration wizard it pups with error:
Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration'
Can i delete follwoing key in the registery?
The follwoing article asked to remove the key:
http://social.technet.microsoft.com/Forums/en-US/487f18d4-32cf-4056-a6de-433f69bb7470/configuration-wizard-failed-to-find-assembly
my registry entry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy]
"AssemblyQualifiedName"="Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
"ServiceProxyName"="MSOLAP$POWERPIVOT"
Ravi

Hard drive i/o error, spinning beachballs. PASSES Smart test, but fails two specific parameters:

I'm on a Macbook from early 2007.
First off, I'm fully aware that my HD is probably on its last legs and I have two gigantic TB external HDs on which there are multiple images of the entire drive, so data loss is not currently a problem for me. I've also just finished college assignments for the summer so I can afford to mess around with this a bit before taking the plunge and replacing it.
What intrigues me is this. The machine has been extremely slow for a long time. Recently I disabled swapping and the speed rocketed, presumably due to the HD being utilized less during usage. Now the downside to disabling swapping is that when Safari Web Content gets out of control as it always eventually does, you can have a full on system hang which requires a forced shutdown through the power button. So it's very possible that the issues I'm currently experiencing are to do with the machine being improperly shut down one too many times and somehow damaging the drive itself.
But anyway, this is the interesting aspect. Using TTP I ran a SMART test on the internal HD from one of the bootable partitions on one of the external ones, and to my astonishment, it actually PASSES the smart test. The only two parameters which fail are the following:
Raw Read Error Rate
Write Error Count
An image of the SMART test results is attached:
Now to give you an example of the kind of issues I'm having, in order to take that screenshot I used "Grab". When searching for Grab in spotlight it gave me results from the internal HD and from all the various backup drives I have attached. I opened the internal copy and one from a backup partition on another drive (neither of which currently booted from). The one from the backup bounced and opened. The one from internal bounced about 15 times, the spotlight bar hung with a spinning beacball, and I ended up force quitting because I got sick of waiting for it. That's the major symptom of the issue I'm having.
Now here's the reason I'm posting. As I say I know this drive is about to go so there's no need to lecture me about that, I can't replace it immediately but plan to in the very near future when I have a chance. My question is this. Those two specific failed SMART results, what exactly would cause them in terms of HD problems? Bearing in mind that it passes every single other SMART parameter, am I looking at unmapped bad blocks, a physical problem with the head, a loose wire, a bad motor, or what? I'm just wondering specifically what might be wrong with the drive, out of pure curiosity more so than anything else. The fact that most parameters pass suggests to me that it's one very specific malfunction as opposed to the drive generally imploding.
A surface scan from TTP crashed, but not before giving me about 30 "Used block is not a file" messages.
Finally, to temporarily use this drive, what's the procedure? If it's unmapped bad blocks, to I erase and install, or do I go into the whole "zero all data, then reformat" option? I have a backup image taken last night from the external drive which I can restore to the internal any time I want, and as I say with so many backups and so few deadlines ahead of me I don't mind messing around a bit and experimenting.
So if it IS a bad block issue, what does one do to force it to map them?

Had a feeling. As I say it's already fully backed up and ATM I'm running the machine off a partition on the external. But as I say, I'm curious as to what's actually wrong with it - what type of damage / failure would cause those specific smart parameters to fail but not the rest? The motor, the head, the disk surface, what?

Error 101 when trying to download using the Adobe Download Assistant

What the F__K, I reisntalled windows 7, second time the same **** happen at the end, I m using a Data plan which allow me to D/L 8 GB max in one month , this happened thrice with me , this time i downloaded in my D Drive 22.7 GB of free space remaining after complete D/l , and in C Drive I ve 50 GB free space , Operating System is now Windows 8 Preview , Last two times it was on Windows 7 Ultimate, Stilll having the same Downloader is really a super slow SICK I ever experienced.. Kindly look into the matter and resolve the issue with genuine REASONS , as i already seen and read all the Forums and post regarding to this problem

These are the errors coming while I'm trying to extract the CS6 , but these error wont come while extractice indicisuals set ups of Photoshop, Dreamweaver and Flash.. so I think the problem is in CS 6 Setup, I already mentioned that I try all the thing that u have told about user permissions, I never change the permission in case while I am extracting PS, DW and Flash, so why I need to provide permission in CS 6 ??? although all permission are set to FULL CONTROL still unable to extract in any version of Windows, Also the problem is when now I am trying to Download the file again from direct link this message is coming :
Access Denied
You don't have permission to access "http://trials2.adobe.com/AdobeProducts/FLBR/4_6/win32/FlashBuilder_4_6_LS10.exe?" on this server.
Reference #18.244b3917.1347607523.5b70ac7c
Can some real Adobe professional help me out on this problem ??? Except Mr. Jeff A Wright , as I am sick of his useless solutions

"Fan error" on Thinkpad X201s

Hello,
My X201s surprisingly overheated and soft-shut down. Upon rebooting the BIOS interrupted startup just to say "Fan Error" and shut down again. Has anyone seen this issue before? Up until now the fan has been working!
I took the keyboard off, and as soon as I press the power button, I see the fan spin for a few seconds then stop - it does not start again and says fan error. I have blown all the dust out, and the fan turns very freely - is there anything else I should try before I send the laptop to be repaired (it is still in warranty but it is a bit of a bore!)?
Thanks for any help,
Edward
Solved!
Go to Solution.

Either the fan is running a little slow or the temperature sensor circuitry is sick. Send it in. It is a pain, but it is the best choice.

[SOLVED] Error when starting awesome WM.

I'm not sure if this should go here or in Workstation User, so sorry if I got it wrong. When I try to startx with "exec awesome &" in my .xinitrc I get an "expected keysym, got XF86Info: line 914 of inet" error. Someone suggested that it could be my keybindings in my rc.lua for awesome but I tried someone else's rc.lua and still got it.
Error Log
xauth: creating new authority file /home/tim/.serverauth.27451
X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux tim-laptop 2.6.26-ARCH #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008 i686
Build Date: 06 September 2008 05:03:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 20 11:49:21 2008
(==) Using config file: "/etc/X11/xorg.conf"
expected keysym, got XF86Info: line 914 of inet
expected keysym, got XF86Info: line 914 of inet
expected keysym, got XF86Info: line 914 of inet
waiting for X server to shut down .
Xorg.log
X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux tim-laptop 2.6.26-ARCH #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008 i686
Build Date: 06 September 2008 05:03:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 20 11:49:21 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5660
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0300000/0, 0xc0000000/0, 0xd0400000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0380000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.4.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "exa"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0300000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 49152
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 49152
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0300000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(II) Synaptics touchpad driver version 0.15.2
(--) Mouse0 auto-dev sets device to /dev/input/event8
(II) Mouse0: x-axis range 1472 - 5472
(II) Mouse0: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) Mouse0 touchpad found
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: TOUCHPAD)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: x-axis range 1472 - 5472
(II) Mouse0: y-axis range 1408 - 4448
(--) Mouse0 touchpad found
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) UnloadModule: "synaptics"
(II) UnloadModule: "kbd"
(II) UnloadModule: "synaptics"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8acb000 at 0xb7a29000
(II) intel(0): [drm] Closed DRM master.
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "glx"
# Load "record"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "synaptics"
Load "xtrap"
Load "freetype"
Load "evdev"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse0"
Option "Device" "/dev/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "true"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 1280 800 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "c000"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "exa"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
.xinitrc
#!/bin/sh
exec openbox-session
#ivman &
#exec awesome &
#/usr/lib/wicd/wicd-client.py &
#xterm -bg black -fg white
rc.lua
-- GGLucas' Awesome-3 Lua Config :D
-- Version 2
-- This config is for use with awesome 3.0.
-- If you have any suggestions or questions, feel free
-- to pass me a message, find me in #awesome on OFTC, or
-- email me at <lucas[at]glacicle.com>
-- I use both wicked and eminent, so to use it,
-- you'll need to get both those helper libraries too.
-- Note that I use all-custom keybindings, so you might
-- want to copy the default rc.lua's keybindings
-- into here if you wish to use those, although you might
-- find you like mine better :P
---- {{{ Require lua libraries
-- Shipped with awesome
require("awful")
require("beautiful")
-- External
require("wicked") -- Widgets
require("eminent") -- Dynamic tagging
---- {{{ 'Beautiful' theme settings
-- Font
beautiful.font = "Terminus 8"
-- Background
beautiful.bg_normal = '#22222222'
beautiful.bg_focus = '#285577'
beautiful.bg_sbfocus = '#11335565'
beautiful.bg_urgent = '#A10000'
-- Foreground
beautiful.fg_normal = '#999999'
beautiful.fg_focus = '#ffffff'
beautiful.fg_urgent = '#ffffff'
-- Border
beautiful.border_width = 2
beautiful.border_normal = '#333333'
beautiful.border_focus = '#4C7899'
beautiful.border_marked = '#91231c'
---- {{{ Modkeys
key = {}
key.none = {}
key.alt = {"Mod1"}
key.super = {"Mod4"}
key.shift = {"Shift"}
key.control = {"Control"}
key.super_alt = {key.super[1], key.alt[1]}
key.super_shift = {key.super[1], key.shift[1]}
key.super_control = {key.super[1], key.control[1]}
key.control_alt = {key.control[1], key.alt[1]}
key.shift_alt = {key.shift[1], key.alt[1]}
---- {{{ Settings
-- Initialise tables
settings = {}
settings.widget = {}
settings.apps = {}
settings.tag = {}
settings.bindings = {}
-- {{{ General
-- Widget spacer and separator
settings.widget_spacer = " "
settings.widget_separator = " "
-- Warp mouse
settings.warp_mouse = true
-- New become master
settings.new_become_master = false
-- Tag mwfact
settings.tag.mwfact = 0.618033988769
-- {{{ Applications
-- Terminal application
settings.apps.terminal = 'xterm'
-- Terminal with gnu screen
settings.apps.gnu_screen = settings.apps.terminal..' -e zsh -c "exec screen -x main"'
-- Terminal with gnu screen over ssh to my main machine
settings.apps.gnu_screen_ssh_desktop = settings.apps.terminal..' -e zsh -c "ssh -t me.glacicle.com screen -x main"'
-- Terminal with gnu screen over ssh to my vps server
settings.apps.gnu_screen_ssh_server = settings.apps.terminal..' -e zsh -c "ssh -t glacicle.com screen -x"'
-- Command to lock the screen
settings.apps.lock_screen = 'xscreensaver-command -lock'
-- Command to turn screen off with DPMS
settings.apps.screen_off = 'sleep 1; xset dpms force off'
-- File manager application
settings.apps.filemanager = settings.apps.terminal..' -e zsh -c "vifm %s"'
-- Toggle music
-- Note: mpdtoggle is my own script for finding out if
-- I want to toggle or play/stop, replace it with mpc if
-- you wish to use it.
settings.apps.music_toggle = "mpdtoggle toggle"
-- {{{ Floating windows
settings.floating = {
["gimp"] = true,
["urxvtcnotify"] = true,
-- {{{ Other
-- Check what widget mode to use
if io.open(os.getenv("HOME").."/.laptop_mode") then
-- Special file exists, display widgets I want
-- on my laptop
settings.widget_mode = 'laptop'
else
settings.widget_mode = 'desktop'
end
-- Highlight statusbar of focussed screen on multiple-monitor setups
if screen.count() > 1 then
settings.statusbar_highlight_focus = {true, 1}
end
---- {{{ Keybindings
-- Initialise table
settings.bindings.wm = {}
settings.bindings.mouse = {}
-- {{{ Open the filemanager at specific locations
settings.bindings.filemanager = {
-- Data partition
["/data"] = {key.alt, "d"},
-- Data partition on desktop pc from laptop (sshfs mount)
["/desktop/data"] = {key.shift_alt, "d"},
-- Home Directory
[os.getenv("HOME")] = {key.alt, "a"},
-- {{{ Run specific commands
settings.bindings.commands = {
-- Open Terminal
[settings.apps.terminal] = {key.alt, "q"},
-- GNU Screen
[settings.apps.gnu_screen] = {key.super, "k"},
-- GNU Screen over SSH to Desktop
[settings.apps.gnu_screen_ssh_desktop] = {key.super_shift, "k"},
-- GNU Screen over SSH to VPS
[settings.apps.gnu_screen_ssh_server] = {key.super_alt, "k"},
-- Lock screen
[settings.apps.lock_screen] = {key.super, "l"},
-- Screen off with DPMS
[settings.apps.screen_off] = {key.super, "o"},
-- Toggle music
[settings.apps.music_toggle] = {key.alt, "e"},
-- {{{ Client keybindings
settings.bindings.wm.client = {
-- Alt+`: Close window
[function() client.focus:kill() end] = {key.alt, "#49"},
-- Mod+q: Focus previous window
[function() awful.client.focusbyidx(-1) end] = {key.super, "q"},
-- Mod+w: Focus next window
[function() awful.client.focusbyidx(1) end] = {key.super, "w"},
-- Mod+Shift+q: Swap with previous window
[function() awful.client.swap(-1) end] = {key.super_shift, "q"},
-- Mod+Shift+w: Swap with previous window
[function() awful.client.swap(1) end] = {key.super_shift, "w"},
-- Mod+c: Toggle floating
[awful.client.togglefloating] = {key.super, "c"},
-- Mod+\: Make window master
[function() local c = awful.client.master(); if c ~= client.focus then c:swap(client.focus) end end] =
{key.super, "#51"},
-- Mod+Shift+a: Move window to previous tag
[function () awful.client.movetotag(eminent.tag.getprev(mouse.screen)) end] =
{key.super_shift, "a"},
-- Mod+Shift+s: Move window to next tag
[function () awful.client.movetotag(eminent.tag.getnext(mouse.screen)) end] =
{key.super_shift, "s"},
-- Mod+Shift+e: Move window to next screen
[function () s = client.focus.screen+1; if s > screen.count() then s = 1 end; client.focus.screen = s end] =
{key.super_shift, "e"},
-- Mod+Shift+d: Move window to previous screen
[function () s = client.focus.screen-1; if s < 1 then s = screen.count() end; client.focus.screen = s end] =
{key.super_shift, "d"},
-- {{{ Tag bindings
settings.bindings.wm.tag = {
-- Mod+a: Switch to previous tag
[function() eminent.tag.prev(mouse.screen) end] = {key.super, "a"},
-- Mod+s: Switch to next tag
[function() eminent.tag.next(mouse.screen) end] = {key.super, "s"},
-- Alt+\: Switch to float layout
[function() awful.layout.set('floating') end] = {key.alt, "#51"},
-- Alt+z: Switch to max layout
[function() awful.layout.set('max') end] = {key.alt, "z"},
-- Alt+x: Switch to tile layout
[function() awful.layout.set('tile') end] = {key.alt, "x"},
-- {{{ Prompt bindings
settings.bindings.prompt = {
-- Alt+w: Run prompt
[{awful.spawn, " Run: "}] = {key.alt, "w"},
-- Mod+Alt+w: Lua eval prompt
[{awful.eval, " Run Lua: "}] = {key.super_alt, "w"},
-- {{{ Miscellaneous bindings
settings.bindings.wm.misc = {
-- Mod+Alt+r: Restart awesome
[awesome.restart] = {key.super_alt, "r"},
-- Mod+e: Switch focus to next screen
[function() awful.screen.focus(1) end] = {key.super, "e"},
-- Mod+d: Switch focus to previous screen
[function() awful.screen.focus(-1) end] = {key.super, "d"},
-- {{{ Keyboard digit bindings
settings.bindings.digits = {
-- Mod+##: View tag
[awful.tag.viewonly] = key.super,
-- Mod+Shift+##: Toggle tag view
[function(t) t.selected = not t.selected end] = key.super_shift,
-- Mod+Control+##: Move window to tag
[awful.client.movetotag] = key.super_control,
-- Mod+Alt+##: Toggle window on tag
[awful.client.toggletag] = key.super_alt,
-- {{{ Mouse bindings
settings.bindings.mouse.desktop = {
-- Right click on desktop: Open terminal
[function() awful.spawn(settings.apps.terminal) end] = {key.none, 3},
settings.bindings.mouse.client = {
-- Alt+Left: Move window
[function(c) c:mouse_move() end] = {key.alt, 1},
-- Alt+Right: Resize window
[function(c) c:mouse_resize({corner="bottomright"}) end] = {key.alt, 3},
---- {{{ Markup helper functions
-- Inline markup is a tad ugly, so use these functions
-- to dynamically create markup, we hook them into
-- the beautiful namespace for clarity.
beautiful.markup = {}
function beautiful.markup.bg(color, text)
return '<bg color="'..color..'" />'..text
end
function beautiful.markup.fg(color, text)
return ''..text..''
end
function beautiful.markup.font(font, text)
return ''..text..''
end
function beautiful.markup.title(t)
return t
end
function beautiful.markup.title_normal(t)
return beautiful.title(t)
end
function beautiful.markup.title_focus(t)
return beautiful.markup.bg(beautiful.bg_focus, beautiful.markup.fg(beautiful.fg_focus, beautiful.markup.title(t)))
end
function beautiful.markup.title_urgent(t)
return beautiful.markup.bg(beautiful.bg_urgent, beautiful.markup.fg(beautiful.fg_urgent, beautiful.markup.title(t)))
end
function beautiful.markup.bold(text)
return ''..text..''
end
function beautiful.markup.heading(text)
return beautiful.markup.fg(beautiful.fg_focus, beautiful.markup.bold(text))
end
---- {{{ Widgets
settings.statusbars = {}
settings.widgets = {}
settings.statusbars[1] = {{
position = "top",
height = 18,
fg = beautiful.fg_normal,
bg = beautiful.bg_normal,
name = "mainstatusbar",
}, "all"}
settings.promptbar = {
position = "top",
height = 18,
fg = beautiful.fg_normal,
bg = beautiful.bg_normal,
name = "promptbar",
-- {{{ Taglist
maintaglist = widget({
type = 'taglist',
name = 'maintaglist'
function maintaglist.label(t)
return awful.widget.taglist.label.noempty(t)
end
maintaglist:mouse_add(mouse(key.none, 1, function (o, t) awful.tag.viewonly(t) end))
table.insert(settings.widgets, {1, maintaglist})
if settings.widget_mode == 'laptop' or settings.widget_mode == 'all' then
-- {{{ Battery Widget
batterywidget = widget({
type = 'textbox',
name = 'batterywidget',
align = 'right'
function read_battery_temp(format)
local f = io.open('/tmp/battery-temp')
if f == nil then
return {'n/a'}
end
local n = f:read()
if n == nil then
f:close()
return {'n/a'}
end
return {awful.escape(n)}
end
wicked.register(batterywidget, read_battery_temp,
settings.widget_spacer..beautiful.markup.heading('Battery')..': $1'..settings.widget_spacer..settings.widget_separator,
30)
-- Start timer to read the temp file
awful.hooks.timer.register(28, function ()
-- Call battery script to get batt%
command = "battery"
os.execute(command..' > /tmp/battery-temp &')
end, true)
table.insert(settings.widgets, {1, batterywidget})
end
if settings.widget_mode ~= 'none' then
-- {{{ MPD Widget
mpdwidget = widget({
type = 'textbox',
name = 'mpdwidget',
align = 'right'
wicked.register(mpdwidget, wicked.widgets.mpd, function (widget, args)
-- I don't want the stream name on my statusbar, so I gsub it out,
-- feel free to remove this bit
return settings.widget_spacer..beautiful.markup.heading('MPD')..': '
..args[1]:gsub('AnimeNfo Radio | Serving you the best Anime music!: ','')
..settings.widget_spacer..settings.widget_separator end)
table.insert(settings.widgets, {1, mpdwidget})
-- {{{ GMail Widget
gmailwidget = widget({
type = 'textbox',
name = 'gmailwidget',
align = 'right'
gmailwidget:mouse_add(mouse(key.none, 1, function () wicked.update(gmailwidget) end))
function read_gmail_temp(format)
local f = io.open('/tmp/gmail-temp')
if f == nil then
return {'n/a'}
end
local n = f:read()
if n == nil or f == ' ' or f == '' then
f:close()
return {'n/a'}
end
return {n}
end
wicked.register(gmailwidget, read_gmail_temp, function (widget, args)
local n = args[1]
local out = settings.widget_spacer..beautiful.markup.heading('GMail')..': '
if n ~= "n/a" and tonumber(n) > 0 then
out = out..beautiful.markup.bg(beautiful.bg_urgent, beautiful.markup.fg(beautiful.fg_urgent, tostring(n)))
else
out = out..tostring(n)
end
out = out..settings.widget_spacer..settings.widget_separator
return out
end, 120)
-- Start timer to fill the temp file
awful.hooks.timer.register(110, function ()
-- Call GMail check script to check for new email
os.execute(os.getenv("HOME")..'/other/.gmail.py > /tmp/gmail-temp &')
end, true)
wicked.update(gmailwidget)
table.insert(settings.widgets, {1, gmailwidget})
-- {{{ Load Averages Widget
loadwidget = widget({
type = 'textbox',
name = 'loadwidget',
align = 'right'
function widget_loadavg(format)
-- Use /proc/loadavg to get the average system load on 1, 5 and 15 minute intervals
local f = io.open('/proc/loadavg')
local n = f:read()
f:close()
-- Find the third space
local pos = n:find(' ', n:find(' ', n:find(' ')+1)+1)
return {n:sub(1,pos-1)}
end
wicked.register(loadwidget, widget_loadavg,
settings.widget_spacer..beautiful.markup.heading('Load')..': $1'..settings.widget_spacer..settings.widget_separator, 2)
table.insert(settings.widgets, {1, loadwidget})
-- {{{ CPU Usage Widget
cputextwidget = widget({
type = 'textbox',
name = 'cputextwidget',
align = 'right'
wicked.register(cputextwidget, wicked.widgets.cpu,
settings.widget_spacer..beautiful.markup.heading('CPU')..': $1%'..settings.widget_spacer..settings.widget_separator,
nil, nil, 2)
table.insert(settings.widgets, {1, cputextwidget})
-- {{{ CPU Graph Widget
cpugraphwidget = widget({
type = 'graph',
name = 'cpugraphwidget',
align = 'right'
cpugraphwidget.height = 0.85
cpugraphwidget.width = 45
cpugraphwidget.bg = '#333333'
cpugraphwidget.border_color = '#0a0a0a'
cpugraphwidget.grow = 'left'
cpugraphwidget:plot_properties_set('cpu', {
fg = '#AEC6D8',
fg_center = '#285577',
fg_end = '#285577',
vertical_gradient = false
wicked.register(cpugraphwidget, wicked.widgets.cpu, '$1', 1, 'cpu')
table.insert(settings.widgets, {1, cpugraphwidget})
-- {{{ Memory Usage Widget
memtextwidget = widget({
type = 'textbox',
name = 'memtextwidget',
align = 'right'
wicked.register(memtextwidget, wicked.widgets.mem,
settings.widget_spacer..beautiful.markup.heading('MEM')..': '..
'$1% ($2/$3)'..settings.widget_spacer..settings.widget_separator,
3, nil, {2, 4, 4})
table.insert(settings.widgets, {1, memtextwidget})
-- {{{ Memory Graph Widget
memgraphwidget = widget({
type = 'graph',
name = 'memgraphwidget',
align = 'right'
memgraphwidget.height = 0.85
memgraphwidget.width = 45
memgraphwidget.bg = '#333333'
memgraphwidget.border_color = '#0a0a0a'
memgraphwidget.grow = 'left'
memgraphwidget:plot_properties_set('mem', {
fg = '#AEC6D8',
fg_center = '#285577',
fg_end = '#285577',
vertical_gradient = false
wicked.register(memgraphwidget, wicked.widgets.mem, '$1', 1, 'mem')
table.insert(settings.widgets, {1, memgraphwidget})
-- {{{ Other Widget
settings.widget_spacerwidget = widget({ type = 'textbox', name = 'settings.widget_spacerwidget', align = 'right' })
settings.widget_spacerwidget.text = settings.widget_spacer..settings.widget_separator
table.insert(settings.widgets, {1, settings.widget_spacerwidget})
end
-- You shouldn't have to edit the code after this,
-- it takes care of applying the settings above.
---- {{{ Initialisations
-- Register beautiful with awful
awful.beautiful.register(beautiful)
-- Set default colors
awesome.colors_set({
fg = beautiful.fg_normal,
bg = beautiful.bg_normal })
-- Set default font
awesome.font_set(beautiful.font)
-- Pre-create new tags with eminent
for s=1, screen.count() do
eminent.newtag(s, 5)
end
---- {{{ Create statusbars
local mainstatusbar = {}
for i, b in pairs(settings.statusbars) do
mainstatusbar[i] = {}
for s=1,screen.count() do
this_screen = false
if b[2] ~= "all" then
for sc in pairs(b[2]) do
if sc == s then
this_screen = true
break
end
end
end
if b[2] == "all" or this_screen then
mainstatusbar[i][s] = statusbar(b[1])
local widgets = {}
for ii, w in pairs(settings.widgets) do
if w[1] == i then
table.insert(widgets, w[2])
end
end
mainstatusbar[i][s]:widgets(widgets)
mainstatusbar[i][s].screen = s
end
end
end
---- {{{ Create prompt statusbar
local mainpromptbar = statusbar(settings.promptbar)
local mainpromptbox = widget({type = "textbox", align = "left", name = "mainpromptbox"})
mainpromptbar:widgets({mainpromptbox})
mainpromptbar.screen = nil
---- {{{ Useful functions
-- {{{ Mouse warp function
function mouse_warp(c, force)
-- Allow skipping a warp
if warp_skip then
warp_skip = false
return
end
-- Get vars
local sel = c or client.focus
if sel == nil then return end
local coords = sel:coords()
local m = mouse.coords()
-- Settings
mouse_padd = 6
border_area = 5
-- Check if mouse is not already inside the window
if (( m.x < coords.x-border_area or
m.y < coords.y-border_area or
m.x > coords.x+coords.width+border_area or
m.y > coords.y+coords.height+border_area
) and (
table.maxn(m.buttons) == 0
)) or force
then
mouse.coords({ x=coords.x+mouse_padd, y=coords.y+mouse_padd})
end
end
-- {{{ Prompt with statusbar
function prompt_statusbar(s, callback, prompt)
if not callback then callback = awful.spawn end
if not prompt then prompt = " Run: " end
for i, b in pairs(mainstatusbar) do
for ii, bb in pairs(b) do
if bb.screen == s then
bb.screen = nil
end
end
end
mainpromptbar.screen = s
awful.prompt.run({prompt = prompt}, mainpromptbox, callback,
awful.completion.bash, os.getenv("HOME") .. "/.cache/awesome_history", 50, function ()
mainpromptbar.screen = nil
for i, b in pairs(mainstatusbar) do
for ii, bb in pairs(b) do
if ii == s then
bb.screen = ii
end
end
end
end)
end
---- {{{ Create bindings
--- This reads the binding tables and turns them into actual keybindings
-- WM Bindings
for i,table in pairs(settings.bindings.wm) do
for f, keys in pairs(table) do
keybinding(keys[1], keys[2], f):add()
end
end
-- Keyboard digit bindings
for i=1,9 do
for f, mod in pairs(settings.bindings.digits) do
keybinding(mod, i, function()
t = eminent.tag.getn(i, nil, true)
if not t then return end
f(t)
end):add()
end
end
-- Prompt Bindings
for prompt, keys in pairs(settings.bindings.prompt) do
keybinding(keys[1], keys[2], function() prompt_statusbar(mouse.screen, unpack(prompt)) end):add()
end
-- Filemanager bindings
for loc, keys in pairs(settings.bindings.filemanager) do
keybinding(keys[1], keys[2], function() awful.spawn(string.format(settings.apps.filemanager, loc)) end):add()
end
-- Custom command bindings
for command, keys in pairs(settings.bindings.commands) do
keybinding(keys[1], keys[2], function() awful.spawn(command) end):add()
end
-- Desktop mouse bindings
for f, keys in pairs(settings.bindings.mouse.desktop) do
awesome.mouse_add(mouse(keys[1], keys[2], f))
end
---- {{{ Set hooks
-- {{{ Focus hook
awful.hooks.focus.register(function (c)
-- Skip over my urxvtcnotify
if c.name and c.name:lower():find('urxvtcnotify') and awful.client.next(1) ~= c then
awful.client.focusbyidx(1)
return
end
-- Set border
c.border_color = beautiful.border_focus
-- Raise the client
c:raise()
-- Set statusbar color
if settings.statusbar_highlight_focus and settings.statusbar_highlight_focus[1] then
if last_screen == nil or last_screen ~= c.screen then
mainstatusbar[settings.statusbar_highlight_focus[2]][c.screen].bg = beautiful.bg_sbfocus
if last_screen then
mainstatusbar[settings.statusbar_highlight_focus[2]][last_screen].bg = beautiful.bg_normal
end
end
last_screen = c.screen
end
end)
-- {{{ Unfocus hook
awful.hooks.unfocus.register(function (c)
-- Set border
c.border_color = beautiful.border_normal
end)
-- {{{ Mouseover hook
awful.hooks.mouseover.register(function (c)
-- Set focus for sloppy focus
client.focus = c
end)
-- {{{ Manage hook
awful.hooks.manage.register(function (c)
local class = ""
local name = ""
if c.class then
class = c.class:lower()
end
if c.name then
name = c.name:lower()
end
-- Create border
c.border_width = beautiful.border_width
c.border_color = beautiful.border_normal
-- Add mouse bindings
for f, keys in pairs(settings.bindings.mouse.client) do
c:mouse_add(mouse(keys[1], keys[2], f))
end
-- Check if floating
for app, i in pairs(settings.floating) do
if class:find(app) or name:find(app) then
c.floating = i
break
end
end
if name:find('urxvtcnotify') then
-- I got sick of libnotify/notification-daemon
-- and their dependencies, so I'm using a little
-- urxvtc window with some text in it as notifications :P
-- This makes it appear at the correct place,
-- feel free to remove the whole section, you probably
-- won't need it.
c.screen = 3
c:coords({
x = 1680*2+1400,
y = 18,
width = 276,
height = 106
c.border_color = beautiful.border_normal
local tags = {}
for i,t in pairs(eminent.tags[3]) do
if eminent.tag.isoccupied(3, t) then
table.insert(tags, t)
end
end
c:tags(tags)
return 0
end
-- Focus new clients
client.focus = c
-- Prevent new windows from becoming master
if not settings.new_become_master then
awful.client.swap(1, c)
end
-- Don't honor size hints
c.honorsizehints = false
end)
-- {{{ Arrange hook
awful.hooks.arrange.register(function(s)
-- Warp the mouse
if settings.warp_mouse then
mouse_warp()
end
-- Check focus
if not client.focus then
local c = awful.client.focus.history.get(s, 0)
if c then client.focus = c end
end
end)
-- vim: set filetype=lua fdm=marker tabstop=4 shiftwidth=4 expandtab smarttab autoindent smartindent nu:
Last edited by Tim Fox (2008-09-20 18:15:15)

andre.ramaciotti wrote:And I'm not sure if you should put that & after exec awesome. It works fine here without it.
No & after entries in .xinitrc . You've commented out the awesome entry.

Error in SICK or SM28

Similar Messages

Maybe you are looking for