Error in smartform after transporting to quality

Hi All,
i have changed smartform and fix the company address form displayed correctly in development. in quality not displayed correctly . the address alignment changed ...can any one give me some idea about this issue....
Thanks
rajesh

Hi,
You must be using different printers in DEV-system and in QUALITY-system to do your testing..
Since, the printer setting are different, you are getting different outputs.
Regards.

Similar Messages

'Screen does not exist' error after transported to Quality server.

I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
Please tel me what should I do to solve this issue. Its very urgent. Please help.
Thanks
Johan

Hi
You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA server?
I would suggest this:
In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
If you have trouble importing into the QA server, please provide the transport logs here.

Pricing Routine is not getting called after transport to quality

Hello,
We have created a new routine under Condition base value formulas. We have done all the required settings so that it is called while creating / changing sales order. Our routine is working fine in Development server but after transporting it to quality it is not getting called. We can see the routine in VOFM but in debugging mode the system is not able to find the routine.
Can anybody please tell me what setting is missing in quality?
Thanks in Advance.
Priyanka.

HI,
Pls ececute this report RV80HGEN in SE38 tcode then only the routine will works for first time.
Regards,
kishore.

Error in DataSource after transport

Hi,
I transported an account based CO-PA datasource into the QAS from DEV. When i try to extract from it, it says :
Errors occurred during the extraction
What coud be the problem here?
Thanks

Hi,
Have you tried to replicate DataSource (on RSA1, right button over data source and choose replicate data source)?
If does not work you can try to activate InfoSource using program RS_TRANSTRU_ACTIVATE_ALL (on SE38 run this program, fill the available fields and run).
I hope it helps!
Kind Regards,

Problem after transport to Quality system

Hi,
I've done the transport of my SWCV from DEV to QLD and everything works fine. I've check all the components in the IR and ID and make the necessary adjustments. But when i try to realize a test from RW with my interface all that i can get is a red box with an exclamation point inside and above this a red cross line and no message appears in XI monitor. Also i've look at Message monitoring and no message avaiable either for Integration Engine or Adapter Engine. Although when i test my interface in IR using the option Tools/Test configuration I get the following error:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://ed18tci1f.appl.edinfor.pt:8078/sap/xi/simulation?sap-client= User: XIDIRUSER
Can anyone provide me some help???
Thanks in advance,
JMMatos

Hi Jose,
Please take a look at this thread..
HTTP connection to ABAP Runtime failed
cheers,
Prashanth

Not able to see added field in datasource after transporting in quality

Hi,
I enhanced a datasource in dev.now i transported it to quality.but in quality m not able to view added field.
let me know where its going wrong.
thanks in adv.
bhavna

Replicate your datasources...and activate the transfer structure...now go to the transfer rules and bring the field for mapping.
Hope it will help.
Assign points if useful.
Regards
Gajendra

Unable to execute the query after transpoting to Quality in BI7.0

Hi Friends,
We are facing problem while executing the query in BI 7.0 after transporting to Quality system.
Whenever we are clicking on the query in Analyser after transporting to quality, it is throwing an error like "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION" and " system error in program SAPLRRI2 and form DIM_FAC_SRDATE-02" and it is disconnecting from BI system.
The transport went successfully to quality system.
Please do the needful regarding the above errors.
Thanks
Rama

Hello,
I resolved the problem. I removed all the variables in the query did another "Query Check" and the error message was clearer.
There were missing infobjects in the Multi-Provider. When I fixed this the error was gone.
Thanks.

Assignment of Source System in quality after transport

Hi Experts,
We have implemented the Inventory management standard flow in Development,
Now to tell you, we have multiple landscape over here,
Depending on the project, and the fesiblility for the client, the tranport layer is been decided,
But for sure we have multiple source system,
By multiple source system, i mean not the other components like R/3, SRM or APO,
but for R/3 itself we have multiple boxes at each layer,
Now when transported to quality,
the standard objects are reflecting after few errors corrected and re transports,
But the source system which it has picked for the BF BX and UM datasource is not that i require according to the transports landing for the R/3 developments,
AT DEVELOPMENT LAYER,
BW development is GDA, which is having the source system connection to development R/3 (GD0),
AT QUALITY
We have BW as EQ3,
For R/3 we have EQ0 and NR0,
All the transports have reached in the respective target quality system,
But the data sources are having source system connection to NR0 and not EQ0,
I want it to be EQ0 as the data lies over there.
How do i resolve this ?
Thanks and should be appricated for your efforts in helping.

Hi Daljeet,
You should set the Source system Conversion option in Transport Connection before Transporting the objects to QA and PRD.
You can do this using the button 'Conversion' next to the button 'Source System Assignment'. Here you can specify the Target source system name after the Transport.
If you want to change all the assignments from NR0 to EQ0, this article will be helpful for you.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
Get the help of your BASIS team also.
Refer this thread.
Re: source system in RSA1 is diiferent to the datasource in infoprovider

BPM error after transport

hi all,
i get the following error after transport on Q system:
"No object type found for this message; check the activation of the corresponding process"
the trace gives me this explanation:
"could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
So what else can i do to fix that bug?
Thanks
Stefan

HI,
Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
Also check the status of check table in quality. Is it active?
All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
If nothing works then include all the objects in another TR and transport. make sure all are active.
Thanks,
Vinod.

Master Data activation error after transport

Hi,
we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Any suggestion?
Thanks
Alberto

we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
The message error is the following:
Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
Error when activating InfoObject ZAA_COB
We tryed with Tx: RSRV but the check produces dump error
This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
We tryed with a second CR with the only IO involved but the error was the same.
We cannot delete the master data content.
Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
I tryed to re-transport but i have always the same error.
I already gave you option-1 above. Here is my thinking.
Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
ext, run the RSRV test on the InfoObject in DEV.
After you do this, collect this InfoObject in a new transport and move it to Test.
I am not sure it wil solve the problem, but its worth a try.
But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
Uday-Ram Chamarthy

Error after transport of Virtual Cube with Services

Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
Noor

Hi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G.

RFC Lookup error after moving to Quality from Development

Hi All,
For a scenario,I am using the RFC Lookup in message mapping.
I am not using it in a UDF but for directly for an target element....
The scenario was wrkng properly in development... but in quality it's not wrkng giving the following error....
RuntimeException during appliction Java mapping com/sap/xi/tf/_ABC_DEF_GHI_JKL_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter ISU_RFC_Receiver does not exist. at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:148) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:620) at
The design part and Config part are done properly..
1.Message mapping-->Parameters (given the CC Name)
2.Operation mapping-->Binding (The binding parameters is specified)
3.In the interface determination.... choosen the Parameter for Operation mapping...
But still i am getting the above error..
Did any1 face the same prblm ever??? If yes may i know how u resolved???
Any inputs or suggestions is appreciated...
Babu

HI Michal,
I checked it thtz fine the same objects are transported to Quality without any modification...
But Still i am getting the same proble..
Any other inputs????
Babu
Edited by: hlbabu123 on Apr 8, 2010 7:54 PM

Problem in quality server after transport

HI,
Yesterday i have transferred a function group from development to quality. It's transorted successfully .All the function module under this group are active. but the status function group shows 'Inactive' because in main program the include is not active. when i go for a syntax check it is correct. while activating it it says <b> "the object is in the worklist of D_tal"</b>
N.B. It was earlier transported to quality . it was working fine in quality. later somebody has deleted some function module from quality and also some unicode check issue was there in quality . so we corrected it in development and created a new Transport request for that function group and transported it.
Why that error "the object is in the worklist of D_tal" is coming.
thanks&regards
sandeep

Hi,
When you transport request into Quality, there will be an option to overwrite existing (Force into system) objects in that system. Ask you BASIS to do the same.
Caution: Transport request objects belongs to that Function group only. It should not impact any other object.
Regards,
Govind.

BI Technical Content datasources not found in Quality after transport

HI All
I am trying to implement BI technical Content for Admin Cockpit. I was able to implement Technical content Infocubes successfully in development box but when I collected the objects and transported to Quality(collected oblects in seperate requests: info objects in one request, datasources in one request, infocubes, transfer rules and updated rules in one request), I am not able to find the datasources in quality in myself sourcesystem even after repication. but the transport for technical content datasources is successfull. The following are the datasources:
       Comment Entry: Released
       DataSource Replica
           0TCT_DS01                     D17CLNT208
           0TCT_DS02                     D17CLNT208
           0TCT_DS03                     D17CLNT208
           0TCT_DS11                     D17CLNT208
           0TCT_DS12                     D17CLNT208
           0TCT_DS21                     D17CLNT208
           0TCT_DS22                     D17CLNT208
           0TCT_DS23                     D17CLNT208
can anyone tell me why I am not able to find the datasources in Quality after successfull transport.
We are on SAP_BW     700   SAPKW70016     SAP NetWeaver BI 7.0.
thanks

thanks for your quick responce. I was not able to collect the datasources so I had to manually input them in the transport request. But it worked.
thanks once again.

DTP error: Type conflict when calling FM - after transport to Prd

Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
ramesh

Hi
Take a look at note 1130907.
Regards,
Chandu.

Error in smartform after transporting to quality

Similar Messages

Maybe you are looking for