Error in Smartform Custom after Upgrade from Release 4.6C to 4.7

Hi,
we have applied the upgrade of release from 4.6c to 4.7. After the process, we recognized an unknown message when try to print an invoice from SD: Sales and Distribution ---> Billing ---> Billing Document ---> Change(VF02); i insert a invoice number, click on DISPLAY function, then GOTO ---> HEADER ---> OUTPUT;
In the next screen , i insert a message type custom linked to a SMARTFORM custom and i click on SAVE; the message is set with a red status, no message system and no print on the paper.
WHAT IS THE PROBLEM AFTER UPGRADE? PLEASE HEL ME!!
The transaction with the link in customizing SD of smartform is V/40
Thanks in advance for any reply!!

I just know the configure of output setting id
Tr-code : NACE

Similar Messages

Critical Hard Disk Free Space Error on Lenovo G500 after upgrading from Win8 to Win8.1

I encountered an error with my harddrive after upgrading my Lenovo G500 from Windows 8 to Windows 8.1. The error is coming up under the Lenovo Solution Center. The error reads "Some partition in your hard drive has less than 9.5% of its capacities. It suggests to click on Fix Options; System; Storage Devices. Then it displays Internal Hard Drive ST1000LM024 HN-M101MBB.The solution center now displays 8 different partitions labled as follows:
Drive Name: Space:
W: WINRE_DRV. 694.99 MB free of 999.99 MB
E... EFI SYSTEM 260 MB
U.. UNAMED PARTITION. 0.97 GB (THIS IS THE DRIVE PRODUCING THE ERROR)
M. MICROSOFT RESERVED PARTITION. 128 MB
C. MICROSOFT RESERVED PARTITION. 850.43 GB FREE OF 890.72 GB
W. WINDOWS RECOVERY ENVIRONMENT. 155.46 MB OF 449.99 MB
D: WINDOWS RECOVERY ENVIRONMENT. 22.74 GB FREE OF 24..99 GB
P...PBR_DRV. 1.8 GB FREE OF 13.01 GB
I have tried to run disk clean up and optimize drives which were suggestions from the Lenovo Solution Center but neither has been successful in removing the error. Any assistance you guys can provide will help me out a lot
Thanks,
Dan

I got an error when i tried disk repair ("the underlying task reported failure on exit - 1 HFS volume could not be repaired, 1 volume could not be repaired"). Is that the source of my problem?
Hi and a warm welcome!
Absolutely, good deduction.
If DU can't fix it after a couple more tries then, your best bets are DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This last one would require another HD with plenty of space to recover to.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.

Error on starting MDS after upgrading from MDM 7.1 sp04 to sp05

Hi ,
I tried to upgrade my local setup from sp04 to sp05.
I used sapins to upgrade with update option.
In the second last step when we get option to which server you want to start after upgrading i select all three servers
i.e. mds ,mdis,mdss
This installation completed with error.
In the log file i found this logs.
The problem is i am able to start mdss and mdis of updated sp but not mds.
In the console i can see the version of mdss and mdis to sp05 but there is no version coming in the case of mds.
Please help me on this isssue
WARNING 2010-07-22 00:46:55.224
Execution of the command "C:\usr\sap\MDM\MDS00\exe\sapcontrol.exe -nr 00 -host INLD50054767A -function
GetProcessList" finished with return code 4. Output:
22.07.2010 00:46:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
mds.EXE, , GRAY, Stopped, 2010 07 22 00:42:21, 0:00:00, -1
INFO[E] 2010-07-22 00:46:55.224
CJS-30086 Instance MDM/MDS00 [STOP] did not start after 5:00 minutes. Giving up.
ERROR 2010-07-22 00:46:56.318
FCO-00011 The step startUpdatedInstances with step key |MDM_Update|ind|ind|ind|ind|0|0|startUpdatedInstances was executed with status ERROR .
Thanks,
Sudhanhsu

Hi Sudhanshu,
You could check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed. It solved same problem on our side.
Best regards,
Jah

Error on schedule.aspx after upgrade from 2007

Hi,
i am upgrading from 2007 to 2013. Everything is fine exept i am having 2 issues :
- i can't access (tried as admin and as project manager) the Schedule.aspx page i am getting the following message "you do not have sufficient permissions to view the specified page. Please contact your administrator for permissions to view this page."
I checked the permissions on this PDP and as admin i have full control. In the ULS log i see the fololowing:
11/21/2013 11:39:29.09 w3wp.exe (0x23A4)                       0x27F8 Project Server
General                       4zb0 Medium Error is: GeneralSecurityAccessDenied. Details: User does not have permission
to this view. . Standard Information: PSI Entry Point: Project User: domain\epmadmin Correlation Id: 1b87b36e-8852-e311-a152-00505686371e PWA Site URL:
http://server/PWA SA Name: Project Server Service Application PSError: GeneralSecurityAccessDenied (20010) Project:d15ee648-155f-47cc-b9a0-27c15a6d8242 d3bf589c-118d-b0bd-6d96-82c5a55627a7
11/21/2013 11:39:29.09 w3wp.exe (0x23A4)                       0x27F8 Project Server
Server-side Project Operations aj4ii High    InitViewReportInfo ViewUid:e1c71617-f168-42cd-b01c-7225cf813f7a is not found. d3bf589c-118d-b0bd-6d96-82c5a55627a7
11/21/2013 11:39:29.09 w3wp.exe (0x23A4)                       0x27F8 Project Server
General                       ahg2n Medium The remote command PWAProjectGetProjectDetailsForGridJsonRemoteCommand encountered
an unexpected exception. d3bf589c-118d-b0bd-6d96-82c5a55627a7
- the second issue is: i can't open some projects in Project Pro 2013 i am getting the following error when opening:
Job Type: Checkin
Error ID: 9000(0x2328) could not checkin project. Please contact your system administrator to force checkin this project.
Weird to get this error when trying to open a project (basicaly checking it out).
I applied the March 12 2013 Update kb2768001 but did not help.
Any help will be greatly appreciated.
Regards,
RD

Hi,
Ok i solved the Schedule.aspx issue: each user had to just simply change the view once they logged for the first time , refresh the page.
I am still facing the issue of some projects not opening in Project Pro 2013: one thing i figured out is that these projects have mandatory fields that are empty: the fields were added after projects were created.
Any idea how i can solve this ?
Thx
RD
Hi RD,
i have also done a Migration from Project 2007 to 2013, i have the same issue with the Schedule.aspx.
Is there a way to solve the issue without to change the view for each user. We have 200+ users.
thx tom

Error deploying Web Service after upgrading from WL 7.0 No Service Pack to SP5

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

Hello
I have problem using HttpServletResposneWrapper with a ServletFilter in WLW
7.0 SP5. When I apply the filter to JWS file in Development Mode, following
Exception is thrown when I access a JWS.
===================================================================
java.lang.ClassCastException: servlet.MyServletResponse
at weblogic.knex.dispatcher.HttpRequest.getRequestURL(HttpRequest.java:233)
at weblogic.knex.dispatcher.HttpRequest.(HttpRequest.java:51)
at weblogic.knex.dispatcher.HttpServer.doGet(HttpServer.java:291)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:1094)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:437)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at servlet.MyFilter.doFilter(MyFilter.java:25)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5632)
at
weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:685)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3213)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2555)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:251)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:219)
===================================================================
I have looked at "weblogic.knex.dispatcher.HttpRequest" class. It seems like
this class tries to cast the response object to "ServletResponseImpl" class,
so ClassCastException is thrown.
Is there any workaround for this issue, since my code is compliance with
J2EE standard. Thank you very much in advanced.
Regards,
Tinnapat C.
PS. These are my codes.
=====================================================================
package servlet;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
public class MyServletResponse extends HttpServletResponseWrapper {
public MyServletResponse(HttpServletResponse response) {
super(response);
=====================================================================
package servlet;
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
public class MyFilter implements Filter {
private FilterConfig config;
public void init(FilterConfig config) {
System.out.println("Filter.init");
this.config = config;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain) throws ServletException, IOException {
System.out.println("Filter.doFilter");
ServletResponse wrappedResponse = new
MyServletResponse((HttpServletResponse)response);
chain.doFilter(request, wrappedResponse);
public void destroy() {
System.out.println("Filter.destroy");
=====================================================================
<filter>
<filter-name>MyFilter</filter-name>
<filter-class>servlet.MyFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>*.jws</url-pattern>
</filter-mapping>
=====================================================================

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

Error after upgrading from SOA 10.1.3.1 to 10.1.4.1 (commons-loging.jar)

After upgrading from SOA 10.1.3.1 to 10.1.4.1 , I cant run any Struts 1 pages from my web application.
I used to have "commons-logging-1.0.4.jar" under j2ee\<INSTANCE_NAME>\applib, and it worked fine before the upgrade, but after I upgraded I get this exception in the application log
11/02/20 18:50:17.31 ClientWeb: Error initializing servlet
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2315)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable
Log constructor [Ljava.lang.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError
: org/apache/log4j/Category) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang
.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:209)
... 20 more
Caused by: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@1c06a6d for org.apache
.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:413)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
... 24 more
Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Category
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328)
at java.lang.Class.getConstructor0(Class.java:2640)
at java.lang.Class.getConstructor(Class.java:1629)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410)
... 25 more
11/02/20 18:50:17.31 ClientWeb: Error preloading servlet
javax.servlet.ServletException: Error initializing servlet
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4857)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
11/02/20 18:50:17.31 ClientWeb: 10.1.3.4.0 Started
11/02/20 18:51:35.906 ClientWeb: Servlet error
javax.servlet.ServletException: Error instantiating servlet 'action'. Servlet class org.apache.struts.action.ActionServlet not found
in web-application ClientWeb
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.servletClassNotFound(HttpApplication
.java:4886)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4852
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication
.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler
.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler
.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor
.java:303)
at java.lang.Thread.run(Thread.java:595)
I tried moving this jar inside my war module, but problem still occures.
However, if I removed the jar "commons-loging.jar" from "OracleAS_1\webservices\lib", everything works fine!
Any ideas how to solve this problem??

It is an old post, but I want to add and ask something anyway:
I had the same problem and solved it through similar steps (didn't get the same errors and added the log4j to my project also) but don't you have the navigation problem?
Now that I have deployed the application the first page that appears after launching the application is my Home.jspx which is not the same page that comes up when I use embedded OC4J to run the application. The Home.jspx is blank and when I enter a link manually:
http://farbod:8888/TestApp/faces/pages/Employees.jspx
instead of http://farbod:8888/TestApp/faces/pages/Home.jspx
I get this error:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
I also tried changing the initial address throughout the application:
<% response.sendRedirect("faces/pages/Home.jspx"); %>
but I still get the above error.
Thanks,
Farbod

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

Maxdb give Kernel error after upgrade from 7.3 to 7.5

Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
The details of the error in knldiag are:
2008-07-02 14:22:39    19     11554 COMMUNIC UKT8 attached big comseg at 0x700000060000000
2008-07-02 14:22:39    19     11555 COMMUNIC UKT8 big comseg ends at      0x7000000601803F8
2008-07-02 14:22:39    16 ERR 20152 RTE      UNIX change owner with chown(knltrace,964,202) failed: Not owner
2008-07-02 14:22:39    16     11000 vdevsize 'knltrace', 666 failed
2008-07-02 14:22:39    16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
2008-07-02 14:22:39    16 ERR 11599 BTRACE   -
> Emergency Stack Back Trace <----
As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
thanks

Hello Thomas,
-> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
     Please check the upgrade log in the /sapdb/data/wrk
-> Please check the ownership of the files in the database RUNDIRECTORY.
For example, if the database owner:group of your database is sdb:sdba, then
-rw-rw----   1 sdb        sdba u2026.     knltrace
-> Please update the thread with the output of the following commands :
           sdbregview -l
           xinstinfo SD3
           id sdb
          ls -l <runditectory>
< rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
        more /etc/opt/sdb
Thank you and best regards, Natalia Khlopina

Impact on Custom / Std IDOC after upgrading from 4.7 to ECC 6.0

I am in Upgrade project (4.7 to ECC 6.0).
What will be the impact of the existing Custom and Std IDOC after upgrading from 4.7 to ECC 6.0 and if any impact, what are precautionary steps to be taken to work as it is.
Will there be any Impact on ALE also ?
Thanks & Regards
Khaleel

closed.

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

ERROR:java.lang.NullPointerException after upgrade 5.5 to 6.0sp1

Hellos.
I get this error message after upgrading from IdM 5.5 to Idm 6.0. I use mysql as repository so the upgrade was not easy.
The ERROR appears when I click on the "List Accounts" tab on the main menu.
However, I can listUsers from the $WSHOME/bin/lh console program quite happily.
The "Find Users" tab also works. I can search for and find and edit users.... but when I save I am returned to List Accounts page which then returns me the NullPointer.
What is going on????
Has anyone else met this and overcome it?
TIA

I imported the default UserUIConfig.xml and was able to �List Accounts� in the menu page. But my customized UserUIConfig.xml is throwing the NullPointerException.
This Is what�s happening in my code.Customized original UserUIConfig with these lines of code.
Added:
<SummaryAttrNames>
<String>employeeId</String>
<String>supervisorStatus</String>��..
<QueryableAttrNames>
<List>
<String>employeeId</String>
<String>organizationCd</String>
<String>supervisorStatus</String>��.
<AppletColumns>
<List>
<Object name='name'>
<Attribute name='label' value='UI_ATTR_NAME'/>
<Attribute name='sortBy' value='true'/>
</Object>
<Object name='lastname'>
<Attribute name='label' value='UI_ATTR_LASTNAME'/>
</Object>
<Object name='firstname'>
<Attribute name='label' value='UI_ATTR_FIRSTNAME'/>
</Object>
</List>
</AppletColumns>
Deleted:
<AppletSortColumn>
     <Integer>0</Integer>
</AppletSortColumn>
<ListViewAttributes>
     <Map>
     <MapEntry key=`DisplayBracketOnBranch`>
     <Boolean>false</Bolean>
          ��
</ListViewAttributes>
Can anybody suggest me if I am missing anything here? Should i be looking at someother xml file? Is the attributes in <AppletColumns>, a major concern?
Thank You.
G

Error in text formatting after upgrade to ECC6.0

Hi all,
After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box. It seems that after upgrade, some of the text procedure in the configuration is missing. Did anybody encounter this problem? Please advise.
Thanks.

Hi Mei,
Welcome to SDN.
It seems the customizing for the texts (Transaction VOTX) is incomplete.
Please check OSS Notes 150775 and 751690 for more detail information.
Regards,
Ferry Lianto
Please reward points if helpful.

SAP OS kernel upgradation from release 700 to 710

Dear Sir,
We are upgrading kernel release 700 (185) to 710 (160).
In this we are getting an error of saposcol i.e saposcol is not started automatically when we run startsap.
Currently we are running our application on Kernel release 700 patch level 185.
Should we have to upgrade application pathes after to upgrade the kernel release 710 patch level 160 ?
Is there any dependency in between SAP Application Patch and SAP Kernel Patch or we can run the application on current application patch level, kindly suggest
Regards,
Mushtaque

Dear Mushtaque,
I am not clear on your purpose for kernel upgrade from release 700 to 710. Your SAP_BASIS and SAP_ABA version showing as 710 or 700. If it is 700, there is no reason to change your kernel release. The latest patch is 201. You should go for this patch incase release 700.
Also, as a post processing steps you need to run saproot.sh with root user after kernel upgrade.
Also please find below link for saposcol options.
http://help.sap.com/saphelp_46c/helpdata/en/c4/3a6c40505211d189550000e829fbbd/content.htm
Regards
Gautam

Error in Smartform Custom after Upgrade from Release 4.6C to 4.7

Similar Messages

Maybe you are looking for