Error in Smartform: Nested output of tables is not possible....

Hi ,
I am getting the below error while executing the smartform.
Nested output of tables is not possible
Message ID: SSFCOMPOSER
Message Numer : 171
could any one plese help me?
Thanks & Regards,
surendra

Dear
AS i reply in thread ,
this error comes with some problem in functional Module .
as we know that two FM use in smartforms -
SSF_function_mudule
call funcion .
so you check both and i hope you handle this problem .
Regards,
Ravi

Similar Messages

Error in Smartform: No output request open.End not possible..

Hi Experts,
I am getting below mentioned error while trying to execute smartform..
NO OUTPUT REQUEST OPEN..END NOT POSSIBLE..
Message no. SSFCOMPOSER154.
Help me to resolve the issue..
Thanks in advance..
Hampanna Kamatar

Hi experts,
I am getting the same error and found found that its because ssfcstat-tdopen getting false in the FM ssfcomp_close.
if ssfcstat-tdopen = c_false.
err_comp ssf_err_close_unstarted 'A' 154 space space space space.
endif.
I want to know the reason why and where exactly the field is getting populated with c_false.
ps: I am using a Zprogram and it PRINTS FOR FEW DELIVERIES AND THIS ERROR FOR FEW DELIVERIES.

Error:Account determination for entry 1000 KBS 0001 not possible

Hi all,
i created one project PO account assignment category Q ,with out master data ,material text , material group , i entered W.B.S ,
P.O . created ,while doing GR , i am getting following error Account determination for entry 1000 KBS 0001 not possible
regards
vijju

Dear Viju,
                                                                                The error M8 147(Account determination for entry XXX KBS
not possible)is because of the corresponding entry mismatch in T030
table .For resolving this we need to make a corresponding entry in
transaction OBYC (the menu path in SPRO is as follows)
Materials Management
-> Valuation and Account Assignment
   -> Account Determination
      -> Account Determination Without Wizard
         -> Configure Automatic Postings
Please also review
Note 364570 M8147,KBS posting when assigning accnt to GR for PO
Regards
V V

Error M8147 Account determination for entry CPES PRD not possible

Hi all
Im getting this error when a try to make a goods receipt whit trx migo and materials whitout material number and GR goods receip: 101. I try with the trx omjj whith movement type 101 and account grouping and then I don´t know how to do, I read I need a new entry here, but I don´t know how to do this. Some one could tell me if I´m doing the things right or exist any other way to solve this problem?
Here´s the exactly message error.
Account determination for entry CPES PRD not possible
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key CPES PRD is not maintained in MM Customizing (Valuation). The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A.
Best regards
Edited by: Alvaro Olmos on Aug 21, 2010 2:36 PM
Edited by: Alvaro Olmos on Aug 21, 2010 2:40 PM

Hi,
Use t.code: OBYC, Double click PRD, Enter Chart of Account.In next screen ,click RULES in application tool bar & then in next screen select check box of Debit/Credit but do not select check boxes valuation class, valuation Modifier & account modifier & save.( not required as price difference will goto one generic G/L).
Now come back & again use t.code: OBYC, Enter Chart of Account, Double click PRD & enter your G/L account for Debit/Credit& save.
Now try your transaction doing MIGO, you would not have any error now.
Better involve FICO consultant for the above steps.
For more check the link:
http://www.scribd.com/doc/2531210/SAP-FI-GL-CONFIGURATION
Regards,
Biju K

Error Message: Creation of Temporary Table "#BIMC_SETS" not possible

Hello,
I am trying to get data from HANA Virtual Data Model (VDM) from MDX connection in MS Excel. The VDM Views and models are visitble after the connection is successfully made.
But when I try to fetch the data, I get the following error:
"Creation of Temporary Table "BIMC_SETS" is not possible".
Can someone let me know how to resolve this?
Best regards,
Akhil

Hi Lars,
I am getting the same error. We are trying to build a role for Adhoc reporting. The role has analytic privilege, object privilege with select on individual models in _SYS_BIC (models we want to expose and part of AP), object privilege on _SYS_BI with select and execute and also object privilege execute on REPOSITORY_REST.
I am able to execute the models using Lumira and Analysis for excel, however getting error with MDX connection.
Also we want to try and restrict direct ODBC access to HANA using query from excel. With the above privileges user is able to see all the M_ views and get data for it. Can we restrict this?
We are on SP6 rev 67.
Thanks,
Aamod

Internal error: Import of table SKA1 not possible in IDoc

Hi All,
I am getting an error like Internal error: Import of table SKA1 not possiblein an Idoc.
Please suggeset me how to resolve this issue.
Edited by: SAP USER on Nov 25, 2009 8:46 AM

Message no. FF724
Check note 681538
thanks
G. Lakshmipathi

InfoView - Error in File ...The table could not be found

When I run the a report out of Crystal Reports 2008 Developer using a 32 bit ODBC data source Microsoft Visual FOxPro Driver, the report runs fine. All of my reports run fine in the Crystal Developer
But when I run the same report in Java SAP BusinessObjects InfoView Enterprixe XI, the same report would get an error: The Table could not be found. Other errors I would get: Encapsulating page failed. None of the reports work in InfoView, but they would work in the Crystal Developer.
Our environment is Windows Server 2008 R2 on a 64-bit Dell PowerEdge Server.

Hello,
If you create the System DSN on the Server and test the connection does it work? If it does then BOE either can't find the DBF file or it doesn't have access to the folder.
Check the permissions on the folder where the database files reside, if they are not local then map the driver where they do exist.
Don

Runtime error in WebDynpro - Access via 'NULL' object reference not possibl

Hi,
    Structure of the CONTEXT in the VIEW::
     WDSCREEN1
          --> IMPORTING
                     --> S_KUNNR   <- its a select option
          --> EXPORTING
                    --> T_REPORT <- Which is table to hold the output data (with 4 fields)
   In the context area i have root node (WDSCREEN1) and Sub nodes are IMPORTING and EXPORTING and child nodes as shown above. When i am referring them everything is fine except T_REPORT.
* Declaration
DATA: node                  TYPE REF TO if_wd_context_node,
              node_exporting TYPE REF TO if_wd_context_node,
              node_importing TYPE REF TO if_wd_context_node,
              node_report       TYPE REF TO if_wd_context_node,
node           = wd_context->get_child_node( wd_this->wdctx_wdscreeb1 ).
node_exporting = node->get_child_node( wd_this->wdctx_exporting ).
node_importing = node->get_child_node( wd_this->wdctx_importing ).
* Bind the data to the context
node_report = node_exporting->get_child_node( name = 'T_REPORT` ).
node_report->bind_elements( lt_report ).
Its giving run time error 'Access via 'NULL' object reference not possible. ' when it comes to ' node_report->bind_elements( lt_report ).' I checked the content while debugging and found that it was initial. Not sure why Node_report is initial. all others have data.
node ->
node_exporting ->
node_importing ->
node_report ->

http://wiki.sdn.sap.com/wiki/display/EP/PointersforTroubleshootingPortalRuntime+Errors
Hope this helps.
-Veer

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Error while creating source system in BI: Modification not possible

Hi All,
We are about to move to production, and therefore it's necessary to create in BI the source system related to our ECC (R/3). While trying to perform this action from BI side we received the error message:
SAP system has status 'not modifiable'. Because of this, and following with known consultants practices we've changed the client to customazing but it still not working although the message at this time is: Changes to repository or cross-client Customazing are not permitted. We have also verified transaction SE06 but it's not possible to change the Cross-Application Component to Modifiable.
Did someone face with this same problem before?
Thanks to all in advance,
Regards,
José.-

Hi Rick,
I really appreciate your quick response. We followed your recommendation and could create the source system without problems. Thanks once again!
Best Regards,
José.-

Getting error on Portal : Access via 'NULL' object reference not possible

hi friends,
While executing a bapi,I am getting this error : Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
I am calling a bapi with only one required parameter from Portal as per the design of the bapi and the bapi itself is calling some other functions internally.
I a using ECC 5.00 i,e. EA-HR 5.00. On SDN it is suggested to Apply OSS Note 1018036. But it is applicable to EA-HR 6.00 and subsequent releases,I guess.
Need your suggestions and also need to know if the above Note can be applied to EA-HR 5.00.
P.S: Points would be assigned, thanks is advance.
Regards,
Sudeep Das

Hi,
ESS Personal information scenarios
Reason and Prerequisites
In case record is not modified successfully it should discard the
trial.Due to program error this was not happening correctly
Solution
Code changes were done in ESS adapter to handle this scenario
Hope this helps
Regards
Krishna

Reverse GR error:Account determination for entry GCOA...not possible

Hi!
If we encounter the error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible when reversing GR, does this have something to do with the number of available stocks of the materials?
In our other servers, the transaction key PRD is blank. but we ca reverse GRs.. but in our production server, PRD is also blank but we cannot reverse the GR. The error Account determination for entry GCOA PRD 0002 ___ ZRO1 not possible comes up.
What could be the reason for this?
Appreciate your help..thanks so much!
Regards,
Paula

Please specify below:
1. what's the price control for problem material? S or V? And what's the price unit?
Price control is V, price unit is PC
There is no change in PO price.. the price is 40.
2. what's the movement type for the material document posted? What's the quantity
in the material document?
mvt type in GR is 101.. PO qty is 3996 pc and GR qty is 3996 pc.
3. what's the accounting doucment posted during the goods movement. Please list all the lines
in FI document with transaction key information(BSX/WRX...)
89 - BSX
96- WRX
4. what's the current stock/stock value for the problem material, i.e. the stock/stock value before
posting the GR reversal?
current stock is 6,383.000 pc
GR reversal has not been done yet...
Thanks so much for your time..
Regards,
Paula

Error in smartform japaneese output allignment when we get thatby email.

Hi ALL ,
I am getting the following output when i am sending an email .
I am using a smartform for that display.
My problem is field allignment as shown in the below records.
Because of small characters in japaneese language we are not getting the proper way of the below fields:
Requirement: I have to arrange all the right side part the same way as the left part.
   貴社注文番号:                 A0012634-1
   受注処理日:                  23.05.2006
   弊社受注番号:                 7050808206
   弊社受注入力日:                23.05.2006
   変更日付:
   受注元:                    新日軽ベストシステム (株) 管理部
    通貨:                     JPY
   支払い条件:                  Close EoM/1 mo./Payment EoM
Please suggest ur feedback to solve the issue .
Thanks In advance.

hi,
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data = wa_doc_chng" check your language given.
        put_in_outbox = 'X'
      TABLES
        packing_list = i_objpack
        object_header = wa_objhead
        contents_bin = i_objbin
        contents_txt = i_objtxt
        receivers     = i_reclist.
here in the exporting parameter, which language u gave...
Any japanese letter is printing in your e-mail.. ???
hope this will help you..
regards
vijay

Error in smartform japaneese output allignment

Hi experts,
I am getting the following output when i am sending an email .
I am using a smartform for that display.
My problem is field allignment as shown in the below records.
Because of small characters in japaneese language we are not getting the proper way of the below fields:
Requirement: I have to arrange all the right side part the same way as the left part.
貴社注文番号: A0012634-1
受注処理日: 23.05.2006
弊社受注番号: 7050808206
弊社受注入力日: 23.05.2006
変更日付:
受注元: 新日軽ベストシステム (株) 管理部
通貨: JPY
支払い条件: Close EoM/1 mo./Payment EoM
for example :
通貨: JPY
受注処理日: 23.05.2006
should be like
通貨: JPY
受注処理日: 23.05.2006
Both J and 2 should be in the same line.
Pelase suggest how we can handle dis issue?
One more thing , here we r looking the output in SOST and through email also .
So the output should be same in both.
Please suggest ur feedback to solve the issue .
Thanks In advance.
RAhul
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 8, 2009 3:24 PM

create a template with two columns and as many rows as u want and print ur text in that.
Edited by: kartik tarla on Jan 9, 2009 2:02 AM

Nested html-tags in JTextPane not possible?

Hi.
Why does JTextPane not support contents like this:
<p align="center">
<h2>Hello, world!</h2> 
</p>This code is parsed and changed into:
<p align="center">
</p>
<h2>Hello, world!</h2>Is there any possibility to get around this?
Cheers,
kelysar

I do not know about how to treat HTML by JTextPane.
According to http://www.w3.org/TR/html4/sgml/dtd.html,
<!ENTITY % block
"P | %heading; | %list; | %preformatted; | DL | DIV | NOSCRIPT |
BLOCKQUOTE | FORM | HR | TABLE | FIELDSET | ADDRESS">
So you cannot use h2 element in p element.
Regards,

Error in Smartform: Nested output of tables is not possible....

Similar Messages

Maybe you are looking for