Error in smartform when printing multiple pages
Hi,
I m using a smartform which have two pages in it,
i m able to save and activate it without any error message and when i run the function module generated to chk my smartform
it runs fine and diplays two pages i m using.
but as i m attaching this form with my driver program it is giving an error message while running . the error message is " No other output defined in main window."
Please help me out to resolve the issue.
Re: error in smartform when printing multiple pages
dharani tadikonda
Thanks for this answer. It is absolutely correct.
Similar Messages
-
Disable Auto-Centring When Printing Multiple Pages
Hello,
I am using Adobe Reader XI Version 11.0.04 (mac). I am trying to print multiple pages (specifically custom 1 by 3 portrait), but am finding that the 3 pages auto-centre (appear in the middle of the page). Is there a way to disable this auto-centring so that the three pages can be flush to th left of the page (e.g. left margin).
ThanksRe: error in smartform when printing multiple pages
dharani tadikonda
Thanks for this answer. It is absolutely correct. -
Any way to get more than 100% zoom on print jobs when printing multiple pages?
I know how to increase the size of a print job, when I am printing one page at a time. But when I go to print 2 pages at once (the multiple page print function), there are always large margins around the page. I'm ok with saving paper and printing up two pages, but it seems silly to see small print and wide blank margins. Is there any way to increase the print zoom, when printing multiple pages per sheet of paper?
I once overshot the limit by marking too many photos to fit within 99 pages, but I could never figure out how to fool the application and had to give up trying to add those 14 extra photos.
I asked a friend (who practically lives in Terminal) if he had any way of modifying that limit, but he reminded me that if their printing services are set up to bind books and bill for only 99 pages, fooling the application might be useless if the service only prints me a 99 page book and discards the additional pages.
I can understand that you wouldn't want to let people print 1000 page books, but I sent feedback anyway to allow me to increase the limit. Anyone know of any service that lets you print beyond iPhoto's limits? -
No Scaling when Printing Multiple Pages per Sheet
I'm trying to print a pdf document but with 2 pages per sheet. I tried to scale up the document by 10% (in the page setup tab) but it actually scaled down about 30%. Any idea what could be going wrong? Can Adobe even scale up and print multiple pages on the same sheet?
Are you using the Multiple button under the Page Size & Handling section of the Reader Print dialog? This section allows you to determine how many pages are printed per sheet. The scaling is pre-determined by the number of sheets you have selected.
-
I have set the print settings to "Ignore scaling and Fit to Page" and it seems to work only for the first page of a multi-page webpage or email chain. Nothing I've done seems to fix it. I've set the print settings to 90% scale in page set-up in order to print FedEx online waybills properly, but I can't seem to solve the other problems.
Doc: I've had a similar experience, and here are the details, investigation, and a workaround. My printer is a Brother MFC-645CN, and I'm using Snow Leopard (10.6.8) on a 2010 iMac quad i5 connected to the printer over my ethernet LAN. Are you using a Brother printer?
Firefox has shown this kind of nasty issue for the past six months or so. It seems to be related to the imaging algorithms in Preview when dealing with Firefox (now at v.12) and the Brother printer -- the screwy second page (and beyond) show up skewed and up-sized when doing a print preview also. No such problem seen in Safari or anything else. I am not currently using any other Mozilla apps on this Mac besides Firefox.
A few months ago I tested printing from my administrator account and a different user account. Firefox printing was completely normal and as expected. When I went back to my main user account, back came the funky second page.I went through extensive troubleshooting to try to chase it down, systematically removing and replacing apps and preferences and many other Library files related to printing, Brother drivers, Firefox, and Preview. Nothing helped. Solution was to migrate my user files to an account where the printing problem wasn't happening. I deleted the problem user account.
Everything was fine for about three weeks, and then with no warning, printing was back to the bad second page, just as before. I am stumped, and I'll let smarter people try to figure it out. I use Firefox a lot, and it's possible that some add-on setting is interfering, or a web page I visited turned the printing funky again. I just don't know.
Also checked on a Mac G4 running Leopard (10.5.8) and Firefox 3.6.28. No printing/preview problems there.
Now, for the work-around I am currently using -- print each page separately, one at a time. Page 1, then page 2, etc. Preview and printing looks completely normal. Hope this works for you until the bug is located and squashed for good.
Glenn -
Preview buggy when printing multiple pages per sheet using a custom paper size
I have a square book I've designed and I've printed the pages to a PDF. Now I'd like to re-print the pages so you can see facing pages together exactly like when, in preview, you select "View > Two Pages".
Each page is 12x12 so I'd like to re-print them to be 24x12 (24-wide)
I was previously able to do this in preview (prior to mountain lion) using the "layout > two pages per sheet" option with a custom paper size but when trying with Mountain Lion, the print-dialog preview doesn't match the output when saved as pdf; pages either get shrunk or cropped without my permission and it generally seems to be buggy. I've been playing around with it for over an hour and can't get two pages side-by-side to take up a full 24x12 custom virtual page when saved as PDF
I would expect the print preview to accurately display what will be printed (saved as PDF) and I am guessing that maybe the printer selected (HP all-in-one) is affecting the preview and save to pdf options?
Can someone tell me how to achieve a printed rendition of the "view > two pages" layout?I have a little more information. I turned on "single hairline" border and as you can see, it's converting my square pages into "US Letter" pages BEFORE applying them two-to-a-page. So it's using my selection of "Paper Size" as both the source and destination paper size, rather than just the destination size, because my source is obviously 12x12 square (confirmed by looking at page properties in preview). Apple, please fix this
-
A way to reduce margins when printing multiple pages per sheet?
I really like the new leopard print dialog box. Is there a way of reducing the large margins when printing 2, 4, or more pages per sheet (in Layout)?
You could use custom page sizes (in the Page Setup dialog) or you could see if the settings in the Paper Handling panel help at all.
-
Keep recto/verso page placement when printing 'Multiple' pages on single sheet
Dear All,
my book is designed for duplex printing. Every chapter starts on recto (odd) page.
When I need to print it for proofreading in the multiple mode (2 pages on single sheet), pages do not follow the original intent as the first page is placed on the verso page (left half of the sheet), not recto one (right half). I couldn't find any option to place the first page on the recto 'side' in the Print dialog.
My current workaround is to place one blank page at the beginning of my PDF file.
But I'd like to avoid this manual step in the future. Is there a more efficient way?
Btw, it would be nice to add a single option for this into the Print dialog. It could be handy for everyone.
What is the best place for such kind of feature request?
Thanks, Janhave no idea about what is wrong on your machine.
Here doing that I get a normal behavior:
You may try:
a - quit/close Numbers
trash the preferences file:
<bootVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers.pli st
empty the trash
restart Numbers.
b - try to do the job from an other user account
tell us how the beast behaves.
Yvan KOENIG (from FRANCE samedi 31 mai 2008 14:47:07) -
Reducing margins when printing multiple pages on one sheet
When I print a pdf document from Preview, a document from Pages, or from any other application and select the Layout-> Pages Per Sheet as 2, 4, or more, very large margins are put around each sheet and between the pages on the sheet. If these margins could be reduced, the print size would be bigger. Is there any way to reduce these margins (say down to 1cm or so)?
I figured out a way to reduce the margins. You can do it quickly by choosing Scale to Fit-> Fill Entire Paper, from the Preview settings in the print dialog box. You can also increase the scaling to make the writing fill up more of the page manually by choosing Scale -> and putting a higher percent. The preview window is helpful in showing what it will look like.
-
How do you get rid of white space when you are printing multiple pages to one sheet of paper?
How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
ThanksTake a look at Quite Imposing.
-
How to print multiple pages in single spool in smartforms
Hi all,
I have a issue on to print multiple pages in single spool,i can able to print multiple pages in multiple spool .I am doing Check Print smartforms in that i need to print Multiple pages in single spool.Currently i am using the below code please help to solve this issue.
IF gv_tabix = 1.
lwa_outp_option-tdnewid = 'X'.
ELSE.
lwa_outp_option-tdnewid = ' '.
ENDIF.
Thanks,
DeesanthHi
TABLES: spfli.
DATA:
t_spfli type STANDARD TABLE OF spfli.
DATA:
fs_spfli TYPE spfli.
DATA:
w_form TYPE tdsfname,
w_flag TYPE i,
f_nam TYPE rs38l_fnam,
w_input TYPE ssfcompin,
w_control TYPE ssfctrlop.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECT-OPTIONS s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK blk .
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME.
PARAMETERS:
p_single RADIOBUTTON GROUP rad1,
p_ind RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block1.
START-OF-SELECTION.
PERFORM display_data.
PERFORM ssf_function_module_name.
PERFORM spool_request.
*& Form display_data
* text
* --> p1 text
* <-- p2 text
FORM display_data .
SELECT * FROM spfli INTO TABLE t_spfli WHERE carrid IN s_carrid.
ENDFORM. " display_data
*& Form ssf_function_module_name
* text
* --> p1 text
* <-- p2 text
FORM ssf_function_module_name .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = ' '
IMPORTING fm_name = f_nam
EXCEPTIONS no_form = 1
no_function_module = 2.
* IF sy-subrc NE 0.
* MESSAGE 'Form cannot be displayed' TYPE 'E' .
* ENDIF. " IF sy-subrc eq 0
ENDFORM. " ssf_function_module_name
*& Form spool_request
* text
* --> p1 text
* <-- p2 text
FORM spool_request .
w_input-dialog = 'X'.
CALL FUNCTION 'SSFCOMP_OPEN'
EXPORTING input = w_input
EXCEPTIONS error = 1.
*" LOOP AT t_spfli .....................................................
LOOP AT t_spfli INTO fs_spfli.
w_control-no_open = ' '.
w_control-no_close = ' '.
*"Single spool request..................................................
IF p_single EQ 'X'.
w_control-no_open = 'X'.
w_control-no_close = 'X'.
ELSE.
*"Individual spool request.............................................
IF w_flag NE '1'.
w_control-no_open = 'X'.
w_control-no_close = ' '.
w_flag = 1.
CALL FUNCTION ' '
EXPORTING control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
endif. " IF w_flag ne '1'
ENDIF. " IF p_single eq 'X'.
CALL FUNCTION ' '
EXPORTING
control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
ENDLOOP. " LOOP at t_spfli into ...
*&This function module close the spool request *
CALL FUNCTION 'SSFCOMP_CLOSE'
EXCEPTIONS error = 1.
ENDFORM. " spool_request
Regards,
Sravanthi -
Error printing multiple pages and incomplete pages if minimise document
I have had this issue before but can't remember how I resolved it. When I print from my Lenovo desktop the printer fails to print multiple pages at a time and also if I close or minimise a document I am printing then the printer will stop mid page.
Hello @Lindseyjc81 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues printing multiple pages. I would like to help!
Do you have any issues making a copy?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Two sided printing when I print multiple pages
Don't know what happened but all of a sudden when I print multiple pages, it prints double sided. Doesn't matter if I go into preferences and click one sided, it still prints double. I have a MAC, vers 10.9.5 and it looks like my adobe acrobat pro looks like vers 8, Can any help this village idiot? Ready to pull my hair out or throw this huge peice of equipment out the window. Oh, and at intervals a window comes up for Adobe updates and it says, not online--while I am online. Apple can't even help me. Thanks a million.
Not sure what type of printer you are using or environment you are in (corporate workgroup) but it is possible someone set the printer defaults to two-sided.
-
Photosmart C4580 - printing multiple pages in error
Hi - I have the above printer, and it is printing multiple pages instead of the number requested. I have to physically stop the printing after the required number of pages, otherwise it will continue to print more of the same pages. I have uninstalled, and reinstalled the printer, and all other aspects are working fine. It is linked wirelessly to the computer and that is fine. Any help you may have would be appreciated. Regards, debnmaid
Using the printing API, you have a Graphics object to do your printing on.
So just set a clip window to your current 1/4 of the screen, draw page, translate to the next 1/4, set clip, draw page, etc.? -
How do I print multiple pages (2) to one A4 page?
Hi folks,
How do I print multiple pages (2) to one A4 page (as you can in a PDF) ?
There is no option when I try to print & I have checked advanced etc. I have tried opening as a PDF. I have tried printing to PDF but it won't allow.
Any ideas or suggestions would be greatly welcomed - I don't fancy printing the whole 188 pages, but I need them all!
Thanks,Hi Chris,
Try this, and if you have any trouble get back and we'll trouble shoot, but I think it will work for you.
Open System Preferences.
Select Print & Scan
Click on your printer under Printers in the left pane
Click "Open Print Queue", on the right
The print queue app will appear on your Dock
Open a Finder window containing your files to be printed and select them all
Drag the files from Finder to Print Queue icon in Dock
Regards,
Jerry
Maybe you are looking for
-
Office Web Apps server / Lync server 2013
Hi I have installed a Lync 2013 Server and Office Web Apps Server. Configured Lync topology, Office Web Apps farm and certificates. However when i start the services i get this error message in the log saying Office Web Apps discovery failed. Event I
-
How to use iChat to register a new Jabber Account
I work in an office with all Macs and we'd like to begin using iChat for intra-office messaging. Many of us already have AIM accounts, but we'd like to keep internal office communication strictly internal. We have a computer running Parallels Server
-
Export NOTES from Mac Mail to Outlook 2011 for Mac
I have been trying to get Outlook 2011 to work as my primary Mail, Calendar, Notes, and Contacts. I have only been successful syncing Mail (except for Notes), which it seemed to do on its own, and Contacts where I dragged an exported VCard file to O
-
I got a message to up grade Firefox so I did. At a certain time in the process a message came up and said that you have some add ons that aren't compatible with this software so they will be disabled. At this time I tried to stop the up grade because
-
"Are you sure you want to send a form again" Pops up when I navigate back.
Why does this statement keep popping when I navigate back? "Are you sure you want to send a form again"? This is very annoying and I would like to be able to stop it.