Error in SMQ1 outbound queue in SAP CRM

Hi SAP CRM Experts,
When the changes are made to an existing order in SAP CRM and in change mode showing the message as "Document is being distributed-changes are not possible".I have cheked the SMQ1 , there was sysfail with info " The ASSERT condition was violated" and in SMW01 BDOC state as " Sent to receivers (not all have confirmed)".Also in the SAP R/3 , there was a short dump " Assertion-Failed.
What could be the probable reason for this ?
I Would appreciate providing the solution at the earliest.
Best Regards
Succhi

Hi,
The short Dump may help you to find where exactly the error is.
Check in which program are you getting this Dump. Is it sandard or custom?
Also in short dump you will be able to see the part of code where the system throws the error.
this can give a good idea on the issue.
Regards,
PP

Similar Messages

Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi A

Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped

Outbound mails from SAP CRM server

Hi,
Is there any way by which Outbound mails from SAP CRM server can be routed to more than one mail servers?
Any suggestions or work arounds will be appreciated.
Thanks and regards,
Asheesh

Hello Asheesh,
it is possible to create more than one Mail Node in Transaction SCOT. The mail can then be routed depending on the Domain Name.
Regards
Gregor

Need to know how to check the outbound queue in SAP for data flow into CRM

Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.

Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra

SYSFAIL Error in SMQ1 (Outbound)

Hi Experts,
We came across the dumped queues in SMQ1 (Outbound) with SYSFAIL error which were specifically described as: Die laufende Anwendung hat bewußt einen Abbruch mit Kurzdump ausgelöst which means, The current application has deliberately triggered a termination with short dump.
One example is: CRM_BT_LRP4910739398ZDE1.
We tried RSQOWKEX to restart the queues but the attempt was unsuccessful.
Thanks for your help.

Hi Vinay/Denis,
Thanks for your inputs.
We already tried to look for these queues in SMW01 but all of those queues are not found in middleware.
Is there any other way on how we can proceed?
Thanks for your prompt response.

SMQ1 outbound queue

Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.B

Hi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh

SMQ1 - outbound queue with destination NONE

Dear all,
I did the setup for LIS application 13 two days back. I have scheduled the V3 job in LBWE but the job fails with ABAP Dump. I checked in SMQ1 and see that the destination in NONE for this datasource. Please help me.
Thanks and Regards
Adhira Anand

Hi Mti,
I did a init with data transfer and DSO is my first data target.
Please check the below ABAP dump.
What happened?
    The current application program detected a situation wh
    should not occur. Therefore, a termination with a short
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    Structures have changed (sy-subrc=2)
    Long text of error message:
    Technical information about the message:
    Message class....... "MCEX"
    Number.............. 194
    Variable 1.......... 2
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLMCEX" or "LMCEXU22"
    "MCEX_UPDATE_18"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMCEX" - in "MCEX_UPDATE_18".
    The main program was "RMCEXUP1 ".
    In the source code you have the termination point in line 156
    of the (Include) program "LMCEXU22".
    The program "SAPLMCEX" was started as a background job.
    Job Name....... "LIS-BW-VB_APPLICATION_18_635"
    Job Initiator.. "SDSDISP"
    Job Number..... 07003800
Thanks and Regards
Adhira Anand

Error while installing new com+ component SAP CRM Mobile Transfer 5.0

Hello experts,
I've upgraded crm/msa from 50sp6 to sp11. In SP11 there msa/mas use dot.net framework
2.0 .
For this I have to upgrade the commstation with note 1065337, but after deleting
the com+ component DOTNET.TransSrv I cannot reinstall the new MsgTransServer.dll,
I get error:
you do not have permission to perform the requested action. If security is enabled on the system
application of the targed computer make sure you are included in the appropriate roles.
Has anybody similar problems while upgrading this ?
I've checked MS-note 909444 for new user rights, but didn't help.
Thanks Gerd

Hi Siva,
I've registered the dll with command line execution as described in
note 1036377. This should solve the problem.
If you have still problems with admin rights on the server have a look on
note 1036377.
Best regards
Gerd

Outbound Queues in CRM system

Dear All,
There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
queues are getting there then it will really helps..
Thanks,
Sapta

Check in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.

Outbound Queue in ECC with CRM Destination

Dear experts
In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
What are the settings to avoid this outbound queue to be created?
Thanks in advance,
Regards, Stephanie

Hello Stephanie.
Please remove the following table entry in your ECC system:
TBE31 (Application components by Publish & Subscribe interface)
- The following entries must exist for a successful data exchange:
                 Event            00501014
                 Obj.class        BUSPROCESSND
                 Fmodule          CRS_SALES_COLLECT_DATA
   Also see Note 490932.
Best regards,
Maggie

Reg:Outbound Queues are strucked in CRM

Hi All,
After Extracting Data from CRM source system,the rercords are still displaying in the outbound queues of the CRM Source system.what might be the issue?In outbound queues the status is NOSEND or is it maintaining one more copy of the records.what happens manually if the queues are deleted.if any queues are deleted the posting to BI is stopped.If any data is missed by deleting the queues ,shall we recover the data back.what are the steps to schedule the those jobs in BI.
Thanks & Regards,
MD.Kalim.

Hello,
I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
My guess is
Customer Relationship Management
Billing
Country-Specific Functions
Official Document Numbering
Transfer Official Document Numbers to Accounting Documents
Check whether there is an entry somewhere there forcing the System to behave the way it does.
Lutz

Outbound queue in NOSEND status

Dear All
We are doing integration between CRM2007 and lotus domino server (6.5)
And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
Regards
Subbaraju

Subbaraju,
We too are running CRM2007 with LotusNotes/Domino 6.5.
The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself.
To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue: SE16 table = ISPQTAB
I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning. If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status. Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
I also recommend sticking to the precise versions of required software:
SUN JDK or JRE 1.4.2 or higher
Sun Java Mail (sap recommends 1.3.1)
Java RunTime 1.4.2
JavaBeans(TM) Activation Framework 1.0.2
Hope this helps.
- Brian.

Inbound Queuing in SAP XI

Hello Friends,
                   please help me on the below issue. my error is when i am sending 1000 messages from jms to jms through SAP XI all the
inbound queues are residing in smq2 . can i release all the queues at a time once. please help me.

Hi!
As our SDN contributors already provided few links I want t provide some information which is useful to you..
NOTE: Also please try to send one by one or atlease few messages other than sending 1000 at at time
I hope it will be useful to you in final case...because even I faced the same problem in BW- XI Integration but in those times I did the same... and also in final case if they restart the server once...all the messagse are gone I mean went to BW from XI by next day when I came there were no of messages
But before doing this please note these points:::
Even though you did this please make sure ...
1. Actually First check what is your Service Pack..as you told that it is XI check are you using SP22...in
    XI 3.0
2. Next check whether is it correct way to send 1000 messaegs at a time because may be your system
    may be using some one and also if they are sending at the same time means...both of your queues wil
    be strucked..
3 First Go to SMQ1 (Outbound queue) and SMQ2 (Inbound Queue)and check how many messaegs are
   there See also make sure the status of those queues some may be SYS FAIL means system fail first
   delete those queues and then RESEND the remaining queues...
4.Also please go to RWB-->Communication monitoring and check your Communication Channel Status
    whether it was green or RED...and also check the AUDIT LOG..
5. Suppose if any errors are there or not even though once go to RWB--MEssage Monitoring and check on
    which basis and on which part it was strucked I mean whether the partiular message fails at Integration
    Engine level or else ADapter Engine level... and finally Check AUdit log...on due to which basis the
    messages are queues I mean due to huge size... of for what reason..
5. Once do this if Still if you are facing same problem go to Transaction Code: SXI_CACHE and do cache
    refresh so that it may be reflected by refreshing all the IR and ID objects.
    Also do ADapter cache refresh...refresh in same Transaction code...
    Or else if you are adminstrator go to TCode : SMICM and go to MEnu--> As JAva and --> Do j2EE soft
    Restart instead of Soft Restart...or else ask your basis poeple to do the same...
Note: WHile doing J2EE engine restart please make sure any Transactions or else any one or working on PI because it may take 20-25 mins to become server up again ...
NOTE: Also please try to send one by one or atlease few messages other than sending 1000 at at time
I hope it will be useful to you in final case...
I hope it will be useful to you in final case...Suppose if it is useful to you please close this and award points to the repective contributors if it is useful to you..
Regards:
Amar Srinivas ELi

Middleware SYSFAIL error in SMQ1/2

Dear Experts,
We are implementing CRM 7.0, with the view of creating BP's in CRM and replicating (vendor/sold-to-party) to ECC 6.
I have run trnx R3AS but whenever i check transaction SWM01 the BDOC is wating(yellow) then I check transaction SMQ1 and there is an error in the outbound queue.
The status is assigned as SYSFAIL and when I check the details there is an error in FM CRM_UPLOAD_TRIGGER - Field symbol has not yet been assigned.
Has anyone experienced something similar? Any assistance will be highly appreciated.
Rgds,
Keitumetse

Hi Shanthala,
Here's the information as requested:
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCRM_BUPA_MOBILE_OUTBOUND" had to be termi
     because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32771).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
I am not sure where the call stack is on the short dump analysis. Hope the above helps, if not please let me know.
Rgds,
Keitumetse

Locking issue SAP CRM 4.0 and SAP R/3 ECC 5.0

Hi all, I have a problem that I would like to share before creating any OSS message. I have connected our CRM 4.0 environment to our new SAP R/3 ECC 5.0 environment and am faced with a strange problem. All middleware settings seem to be correct, business partners, products, pricing and all are replicated correctly. However when I create a sales document in CRM it gets replicated to R/3 correctly but it remains locked by my RFC user, preventing me from making changes to the replicated document. The BDoc status remains 'in process' and for some reason the lock is not being removed. Does anyone have seen a similar situation and how was it solved? Thanks, Tiest.

Tiest,
This problem may not only be applicable for the combination of CRM 4.0 and ECC 5.0, but for other combinations of CRM and R/3 backend systems as well.
I've bee facing the same problems with CRM 4.0 and R/3 4.70
First check your inbound and outbound queues in both CRM and ECC (Tcode SMQ1 and SMQ2). If no queues are 'hanging', then check the status of your BDoc's.
There are some good OSS notes that help you on these problems.
Hope this helps you...
Regards, Jacques

Error in SMQ1 outbound queue in SAP CRM

Similar Messages

Maybe you are looking for