Error in SMTP server configuration 11gR2
Hi Expertes,
I have done the below steps for configurting the notification.
1. Created an IT resource of type mail server.
2. Provided the SMTP server name in the IT Resource.
3. Modified the system configuration and set the XL.MailServer as the newly created IT resource.
4. Logged in to em console.
5.Disabled UMSEmailNotificationProviderMBean and enabled EmailNotificationProviderMBean
6. Add mailservername in EmailNotificationProvider
But mails are not getting triggered on password reset by admin and the following error is thrown in the logs:
Error sending notifications oracle.security.am.common.exceptions.NAPException: Server reported that incorrect NAP version is being used.Error sending notifications oracle.security.am.common.exceptions.NAPException: Server reported that incorrect NAP version is being used.
Thanks in advance
Hi,
I am new to this field.
Kindly bear with me & guide me how to verify the password in SM59.
I went there,but not sure of it.Please let me know.
Regards,
john.
Similar Messages
-
Need help configuring UCM 10gR2 to send emails with godaddy smtp mail server as follows in config.cfg:
MailServer=smtpout.secureserver.net
SysAdminAddress=[email protected]
SmtpPort=25
SmtpPassword=xxxxxx
SmtpAuth=true
HttpRelativeWebRoot=/idc/
HttpRelativeCgiRoot=/idc/
CgiFileName=idcplg
UseSSL=Yes
WebProxyAdminServer=true
Result is:
Caused by: java.lang.Exception: !csSMTPInvalidMessage,"System Administrator" <[email protected]>!csSMTPUnableToFindRecipients,1 at intradoc.common.SmtpClient.writeMultiMsg(SmtpClient.java:582) at intradoc.common.SmtpClient.sendMail(SmtpClient.java:354) ... 22 more
Caused by: java.lang.Exception: !csSMTPResponseIndicatesFailure,553 Sorry\, that domain isn't in my list of allowed rcpthosts. at intradoc.common.SmtpClient.writeMsg(SmtpClient.java:543) at intradoc.common.SmtpClient.writeMultiMsg(SmtpClient.java:567) ... 23 more
Edited by: user13081106 on May 27, 2010 7:37 AMI think you will find that the SMTP connection is working but the SMTP server is returning a 553 error code back to UCM.
Normally this would mean an authentication issue or a domain issue.
I have connected manually to the smtp server you are using and it does not support sending of emails for anonymous users.
I am not aware that UCM supports authentication of the SMTP connections so I think you have two options
1)Write java code to manage authenticated connection to the smtp server
2)see if you can configure a local smtp server that could relay messages to internet
Tim -
Error accessing Name Server Configuration
Hello,
I have installed WebAS 6.40 SP11 and deployed JDI SP11 on a single stand-alone machine, which is configured as Landscape and Name Server. When I try to access the Name Server Configuration in the DTR I get a "Server not found" error.
The URL is http://<server>:<port>/dtr/system-tools/administration/NameServerConfiguration
Where can I search for the reason? Any hints?
Regards,
BjoernHi Bjorn,
As of SP11, the name server configuration requires SSL to be accessed. Thus you need to set up your JDI box for SSL communications then the address would be:
https://<server>:<SSL port>/dtr/system-tools/administration/NameServerConfiguration
SP11 is the first SP to require this SSL access. Note that the communication between your JDI and the Name Server does NOT need to be SSL. You can use the same configuration you used before. Only the access to the name server configuration needs to be SSL.
Hope this helps,
--Greg -
Siebel 8.1.1.11 • Error in Siebel Server Configuration
Problem Description
Hi,
I'm trying to make the Siebel Server Configuration for a new Development Environment.
After completing the Siebel Configuration Wizard I am having the following error:
2021 2014-05-28 12:40:21 2014-05-28 12:40:21 -0300 00000004 001 003f 0001 09 srvrmgr 3672 2404 D:\Siebel\8.1.1.11.0\ses\siebsrvr\log\srvrmgr.log 8.1.1.11 [23030] ENU
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sccobjs.cpp (964) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (samisc.cpp (284) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sasess.cpp (399) err=2555932 sys=0) SBL-SCM-00028: Key not found
Please can guide me to solve this problem
Kind regards,
Christian
Error Codes
SBL-SCM-00028
Problem Category/Subcategory
Installation (installation of FPs, QFs, PSs, Product Certification & Supported Platforms)/Siebel Server
Uploaded Files
File: srvrmgr.log;srvrcfg.logSiebel Name Server Backing File
8.1.1.11 [23030] ENU
1.2
BAkAAAAAAAA=
Persistence=partial
Type=empty
[/enterprises]
Type=empty
[/enterprises/FUSION_SES]
Type=empty
[/enterprises/FUSION_SES/servers]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Host]
Type=string
Value="fusion_server"
Length=26
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/ServerDesc]
Type=string
Value="Siebel Server Profile SIEBELSRVR FUSION"
Length=78
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Lang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncStartTime]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/Primarylang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncPlannedCompletion]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncEndTime]
Type=string
Value="000100"
Length=12
[/gateways]
Type=empty
[/gateways/default]
Type=empty
[/gateways/default/version]
Type=empty
[/gateways/default/version/VersionString]
Type=string
Value="8.1.1.11 SIA [23030] ESN"
Length=48
[/gateways/default/definition]
Type=empty
[/gateways/default/definition/name]
Persistence=full
Type=string
Value="default"
Length=14
[/gateways/default/definition/full name]
Persistence=full
Type=string
Value="Siebel Gateway"
Length=28
[/gateways/default/definition/description]
Persistence=full
Type=string
Value="Siebel Gateway Server"
Length=42
[/gateways/default/definition/enable state]
Persistence=full
Type=string
Value="enabled"
Length=14
[/gateways/default/definition/object id]
Persistence=full
Type=integer
Value=0
[/gateways/default/attributes]
Type=empty
[/gateways/default/attributes/UseDefault]
Type=string
Value="SBA_82"
Length=12
[/gateways/default/attributes/CreateDefault]
Type=string
Value="SBA_82"
Length=12 -
If you see the last command line that saying queued for delivery. what are the causes for this.
Please tell me its urgent.
-thanks
SwapnilHello Swapnil,
Navigate to your queue folder and refresh it.
If problem still persists, kindly restart your SMTP server.
-Hatim -
Error in content server configuration
While creating content repository in OAC0,after filling all necessary fileds and trying to send the certificate,the below mentioned error occurs.
Error in HTTP access : If_HTTP_client>receive 1
ICM_HTTP_CONNECTION_FAILED.
Help me how to rectify...
Regards,
John.Hi,
I am new to this field.
Kindly bear with me & guide me how to verify the password in SM59.
I went there,but not sure of it.Please let me know.
Regards,
john. -
SMTP Server setup / XS855 error message
Hi Experts,
I try to send E-mail messages to external recipients, but getting following error message:
SMTP server setup:
Host: 192.168.3.3
Port: 25
Any suggestions?
Thank you, Denis.Hi Harshal,
Thanks for the quick response.
When I try to ping from my SAP system server to SMTP server host it is connecting and services are running fine.
Even though, I should request mail admin people to register my SAP system server hostname and IP address into SMTP mail host server's host entry ??
Thanks again.
Venkata Madhan -
I can't send a message through my SMTP-server when i configured it IMAP
Hi,
When I configure my email account as POP3 I don't get the send and drafts maps. So I configured it as IMAP but now when i try to send an email I get the notice that the message can't be send through my SMTP server configuration.
Hope somebody can help me out,
Thanks,
StevenReconfigure your SMTP manually
*https://support.mozilla.org/en-US/kb/manual-account-configuration
Make sure about URL and Port No, when configuring the SMTP
Which email server are you using?
*Google/Yahoo/Outlook? -
Cannot connect to SMTP server using Outlook Connector
Hi All,
I am trying to connect outlook client to my oracle mail server in OCS. I have succefully installed the Outlook connector but when i try to connect it gives me the following error:
The SMTP server is unavailable.
When i click on retry it gives me the option to enter the Server name, i type the server name with fully qualified domain name. ( i can ping the server from the client pc from where i am trying to connect). But no luck at all.
However i am able to send receive e-mail from the wb client, no issues at all, which means my SMTP server is up and running. I have also verified that listener_es process is up and running.
Any suggestions or ideas would be highly appreciated.
Thanks,
Dipak.Hi Naqi,
You are absolutely correct. I added the client in /etc/hosts file and it all worked well.
Not just connecting the client but also when i telnet on port 25 i dont get the spam error.
ALso, i have seen lots of your input on the forums and has been very helpfull.
Thankyou so much.
I will be attempting to migrate some of my users via export/import from .pst file. These users have about 9000 mails in their mail box. During the normal migration i had errors and couldnt migrate these users. Let me see how it goes now.
Regards,
Dipak -
How can we map a file in the recepents file in smtp server
hai all,
how can we map a file to teh recipents file in smtp server configuration.
because i didnt hard code the email id there so i has to kept any file or any variable so can any one help me out.
thanks,
RajeshHi There
You can try to use SSIS expressions in your DTSX package which reads the values from the file and then populates the recipient field. This would require some script tasks to read the data and then populate the variables used in the SSIS expression.
[https://www.google.com/search?sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=ssisexpressions&btnK=GoogleSearch#sclient=psy-ab&hl=en&safe=off&source=hp&q=sqlssisexpressions&oq=sqlssis+expressions&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9137l9524l0l9847l4l3l0l0l0l1l522l522l5-1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=67c17c5b88ef2530&biw=1440&bih=799]
It could be easier to configure a distribution list on your exchange server or domino server, and then send an email to the distribution list email address. Then you could manage the recipients from the mail server.
Another way to achieve this, is to put a prompt in the data manager package to pass the recipient email addresses, and then pass that value to script logic. In the script logic it would call a stored procedure with the dynamic input and send the mail.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d01ce779-f1b2-2b10-07ba-da3734013245]
You could use the SMTP relay functions from SQL server.
There are various options available. each option has pro's and con's you will need to decide which is better and easier to manage.
I hope this helps.
kind Regards
Daniel -
Lync 2013 Web Scheduler SMTP Server for invitations - non-exchange env
We cannot get the Lync 2013 Web Scheduler to send email invites to anyone even after configuring the SMTP server for both the external and internal sites on our one and only front-end (we did the super simple same box install for testing
purposes). Yes we have done an IISReset;) Has the SMTP server configuration process for the now built-in Lync 2013 Web Scheduler changed since the add-on Lync 2010 Web Scheduler?
BTW, unless we haven't search for the right phrase(s), it seems there is ZERO documentation about configuring this for 2013 - only for 2010.
HELP!!!Hi,
You can refer to this blog Lync web scheduler without Exchange:
http://blog.lyncfreak.com/2011/11/02/lync-web-scheduler-without-exchange/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support -
How to get default SMTP server name
Hi,
I want to know the name default SMTP server configured in machine. How i can get this through my java code.
Help me on thisYou can find STMP server configured in hostname, in ask to dns of domain who is mailserver, you need to find MX records :
- look a DNS config : NS (name server) , CNAME (Alias) , MX (mailexchange) etc...
import java.util.ArrayList;
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.directory.*;
public class MXLookup
public static void main(String args[]) throws NamingException
System.out.println(getMX("altern.org") + " mail servers");
private static ArrayList getMX(String hostName) throws NamingException
// Perform a DNS lookup for MX records in the domain
Hashtable env = new Hashtable();
env.put("java.naming.factory.initial", "com.sun.jndi.dns.DnsContextFactory");
DirContext ictx = new InitialDirContext(env);
Attributes attrs = ictx.getAttributes(hostName, new String[] { "MX" });
Attribute attr = attrs.get("MX");
// if we don't have an MX record, try the machine itself
if ((attr == null) || (attr.size() == 0))
attrs = ictx.getAttributes(hostName, new String[] { "A" });
attr = attrs.get("A");
if (attr == null) throw new NamingException("No match for name '" + hostName + "'");
ArrayList res = new ArrayList();
NamingEnumeration en = attr.getAll();
while (en.hasMore())
String x = (String) en.next();
String f[] = x.split(" ");
if (f[1].endsWith(".")) f[1] = f[1].substring(0, (f[1].length() - 1));
res.add(f[1]);
return res;
} -
Siebel chart server configuration
Hi Experts,
After installing chart server on siebel servers, we configure the parameters DSChartServer and DSDChartImageFormat under ServerDataSrc profile. Is it possible to have multiple chart servers installed on different siebel servers on the same enterprise and have them configured under ServerDataSrc profile parameters? We need this clarity to check if we can setup high availability for chart servers or not. Incase one chart server is down then will other chart server be able to pick up the load and proceed further?
Thanks,
DiwakarHi,
I have installed Siebel 8.1.1.10 binary on linux machine.
Database is 11.2.0.3
Oracle Client is 11.1.0.
grantuser.sql runned also.
I have sourced cfgenv.sh fine before starting wizard for gateway server .
I have not configured gateway server yet. Starting the first step as Configuring gateway Name Server. Then i select Next, then selected port 2320 as default one. Then Next to provide response file.I have left it blank as its nit mandatory. After next step, I am getting Error
Siebel gateway Server Configuration failed.When I am checking the log files in gateway.log i am getting this details.
2021 2013-12-19 12:50:04 2013-12-19 12:50:04 +0400 00000004 001 003f 0001 09 siebel 3974 -143738496 /d01/siebel/8.1.1.0.0/ses/gtwysrvr/log/siebel.log 8.1.1.10 [23021] ENU
NameServerLayerLog Error 1 0000000252b20f86:0 2013-12-19 12:50:04 Unable to connect to the gateway server.
GenericLog GenericError 1 000000 0252b20f86:0 2013-12-19 12:50:04 NSC - ErrCode 5009 SysErr 0
GenericLog GenericError 1 0000000252b20f86:0 2013-12-19 12:50:04 (srvredit2.cpp (302) err=5009 sys=1) SBL-GEN-05009: Unable to connect to the gateway server.
I have not created Gateway and ita asking Gateway server not started.
All the Server and database are in one machine only.
Please help
Regards,
Anirudh -
Configuration error when saving SMTP server
I am configuring CUP 5.3 (SP06). When I put in our SMTP server, I get the following error:
" Action failed. An unknown error occurred while performing the operation. "
It looks like this screen was changed with SP06. I am not filling out anything under "Enter Email Notification Sender" or under "Application URL" (which seems to be new fields).
Here is what the log says:
2009-03-18 16:23:39,339 [SAPEngine_Application_Thread[impl:3]_39] ERROR com.virsa.ae.configuration.actions.SMTPServerNameAction
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1444)
at com.virsa.ae.commons.utils.URLHelper.initialize(URLHelper.java:430)
at com.virsa.ae.configuration.bo.SMTPServerNameBO.saveSMTPServerName(SMTPServerNameBO.java:106)
at com.virsa.ae.configuration.actions.SMTPServerNameAction.saveSMTPServerName(SMTPServerNameAction.java:76)
at com.virsa.ae.configuration.actions.SMTPServerNameAction.execute(SMTPServerNameAction.java:51)
at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thank you for your help.Hi Peggy,
This is a known bug in AC 5.3 SP6. SAP has added fields for administrator email address, application URL and redirection URL. Even though application URL and redirection URL do not show up as manadatory fields but they are required to save the configuration. To get pass through this error, just provide anything in those 2 textboxes with some dummy email address in administrator email address textbox. You should be able to save it now.
This is being fixed in SP7 which should release somewhere around end of March.
Please check this similar thread:
CUP SMTP server error
Regards,
Alpesh -
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin
Maybe you are looking for
-
Hi, When moving items up or down in the navigation of a workset, the save button remains greyed. However, if you make a change and close and reopen the workset the changes are there. This can be bad if you make an inadvertent change without knowing
-
IP change in Source system...
Hi, We have got source system in BW. Which is pointing to R/3 server. Now we are going for R/3 upgradation. So the IP of R/3 will be going to change. So do i have to create the new source system in BW. Or by changing in SM59 it will work? Ple
-
Messaging Server 3: Startup failure due to postmaster error
Attempting to start up Netscape Messaging Server 3.x fails. From the Server Selector, a dialog box shows the following error message:<BR> <P> "Error: An error occurred during startup." <P> The following error message appears at the command line:<BR>
-
Help! I put every photo in the trash and now they are unorganized
I put every photo in the trash and was not able to restore them to their original position.Thankfully, I was able to save these photos but they are now a jumble. Every photo spawned 5 or so derivatives- face photos, PM, etc. Plus, I had photos saved
-
We have two stack of 3750-X switchs interconnected through LACP, and a CheckPoint Firewall connected to one of the stack. The Firewall use a LACP bond to connect to the 3750-X Stack. On the Cisco switches we don't use any Layer3 functionality. Since