Error in SOAP receiver channel: java.io.IOException: invalid http response:

Hi experts,
I have a IDOC to SOAP scenario where SOAP receiver channel is sending data to web service. In the receiver channel I am getting error as below. Kindly help me to resolve this issue. Thanks.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null"

Did you check this?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards
Pothana

Similar Messages

"Unauthorized" error for SOAP receiver channel

Hi all,
I have a scenario in which I am calling a .NET web service from a UDF in which the XML payload is constructed manually. I have configured a SOAP receiver channel. Also, since the web service needs certificate authentication, I have checked the corresponding parameter in the SOAP channel and selected appropriate client certificate.
When I execute the mapping, I get the following error -
com.sap.aii.mapping.lookup.LookupException: Exception during processing the payload.Problem when calling an adapter by using communication channel SOAP_RCV_IMWS_Change (Party: , Service: IMWS, Object ID: dda07d364ca73d4ab9e89e562a971b36) XI AF API call failed. Module exception: 'com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'. Cause Exception: 'invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'.
Is this related to error in certificate authentication process, OR wrongly formed XML payload OR anything else ?
Regards,
Shankar

No. I didn't provide any login info. The web service doesn't specify username login requirement. Instead, it needs client certificate for authentication, which I provided in SOAP receiver channel.
I am testing the web service by executing the message mapping. The web service was executed successfully from its 'Test Page' like for SAP web services we have web service navigator. So it runs ok from that test page, but gives error when called from UDF.
Regards,
Shankar

Error in SOAP Receiver channel

Hi,
We are working on IDOC to SOAP Scenario (Connecting to third party).
We have configured the SOAP Receiver channel with the Target URL and teh corresponding SOAP Action.
But the SOAP Receiver channel gives the error while processing and sends back the following error message in log :
"Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Value cannot be null. Parameter name: s."
Payload seems to look fine in XI and SAP.
Any help on this ?
Thanks and regards,
Vikas

Hi Vikas,
Copy the payload from SXMB_MONI after mapping and check with SOAPGUI or Altova, if it working fine then your payload is good. You can use the WSDL to ganarate and send independent soap request from these tools.
Besides this IDOC is Asyc, you need to use RequestResponseBean and ResponseOneWayBean to get the response from SOAP. Check the following and try to simulate it.
https://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without+BPM%29
Server was unable to process request. ---> Value cannot be null. Parameter name: s."
The error specifies that the request has null value, check the parameter specified in the error message and make sure that is not null while you are sending the request.
Regards,
Prasanna

Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

Hi all,
We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
We are running PI 7.4.
Any help is appreciated.
Thanks,
Pushpa

Hi,
Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
1. Test a fresh message from local SOAP UI tool.
2. Pick 3rd party WSDL file and Import in SOAP UI tool.
3. Put some dummy data for mandatory fields
4. Trigger it msg and ckh if you get successful / response msg.
5. Check if firewall is open and that URL is not blocked.
Hope it helps
Regards,
Azhar

Invalid http response: null - Error in SOAP sync receiver

Hi,
We are getting the following error in synchronous SOAP receiver connection.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null
note: This inteface is working fine without error in the subsequent run.
Anyone please help me out in this...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Rajendra,
The same issue I am also facing in production system.
In my case the all the requests are failing after an IIS7.5 upgrade of the Application in production.
The strange thing is that except SAP rest all the applications are able to submit requests and getting proper response also.
We are using a https communication and private key certificate authentication in SAP PI.
Does it look like a PI issue or IIS upgrade is causing some issue.
Please suggest.
Thanks,
Ashish

Error with Proxy - Soap sync scenario - "invalid http response:HTTP/1.1 5"

Hello,
I'm working on a PI scenario as displayed below:
Proxy <-> ECC <-> Soap
I've already imported the WSDL provided by 3th party and mapped one of the actions of the interface.
In the PI configuration I`d created the Scenario, using a Soap Receiver communication channel, passing only the URL and the action (no more options used).
When I`m trying testing using SPROXY or Runtime Workbench, the error bellow is displayed, and no receive message is created:
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
Someone knows the error cause?
Thanks,
Ana Paula Lavieri

Hello,
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
HTTP 1.1 is not natively supported by standard SOAP or Plain HTTP Adapter, you should use SOAP Axis for that. See SAP Note 1039369 - FAQ XI Axis Adapter, under Receiver Adapter General -> 16. Can I use HTTP 1.1? Otherwise, you would have to ask the third-party to use HTTP 1.0 instead.
Hope this helps,
Mark

SOAP Receiver Channel error

Dear PI and SOAP experts:
I have been having trouble getting a SOAP Receiver channel working for a webservice. I get the following error in the SOAP receiver channel:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: content-type of the request should be text/xml
I also forced the content-type as text/xml;charset=utf-8 from PI by using the MessageTransformBean as a module in the SOAP Receiver channel, but still getting the same response.
When I called the same w/s using XMLSpy and SOAPUI, it works fine and I get a positive response. So there is no problem with the webservice.
I also tried calling a different webservice from PI and that works fine too. So there is no problem with outbound communication with PI and the SOAP receiver channel either.
But whenever I send the request from PI to the first webservice it gives me the above error.
Thank you.
Param.

Hi Param,
Also, please do have a look at the following link which could be of help to you.
https://wiki.sdn.sap.com/wiki/display/XI/SOAPMessagesin+XI
Best Regards

SOAP: call failed: java.io.IOException

Hi gurus,
I was executing several stress-tests for an interface between to non-SAP systems over PI, that both use async SOAP adapter communication.
The requirement is to transfer up to 70mb files with single files. I executed the tests successfully with a 50MB message size and lower, and then I tried with a 70MB message, but the message failed and got this error in the adapter log:
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
I also checked the messaging system configuration settings in the AS Java but could not find anythig related to the SOAP adapter.
Thanks in advance.
Regards,
S. Gökhan TOPÇ

Hi Gokhan,
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
I believe this is a client-side error, as your request was not properly addressed and the SOAP service was not reached.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
Well, SAP's message size limit is huge but a lot depends on your receiving server's capabilities and network connections. So, you might not be able to reach the SAP's tested message size. In my project, I am able to do a max of 55 megs through SOAP.
Hope this helps.
regards,
Neetesh

Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK

Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
Jitender

HI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen.

SOAP: error occured: java.io.IOException: invalid content type for SOAP: TE

Hi,
We are implementing an XI scenario as follows: Mail Adapter->XI->SOAP Receiver.
Basically, we pass the XML File attachment from the Mail Adapter through XI to the SOAP Adapter. However, we keep getting the following error:
SOAP: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Any ideas on where we could look to fix this problem?
Thanks,
EC

People,
most of errors like that are 401 (unauthorized), 403 (forbidden), 404 (not found) and so on. To be sure, check the message content that comes back from the webservice, in the Message Monitoring.
Obs: To visualize sync messages payload in Message Monitoring, you'll have to set the Messaging.syncMessageRemover.removebody parameter to false (default is true) in SAP XI AF Messaging service, in the Visual Administrator.
Regards,
Henrique.

Reason Of Error java.io.IOException: invalid content type for SOAP: TEXT/HT

Hi All,
I am getting an error, when I am sending message from few BPM's to a common Webservice Synchronously.
Delivery of the message to the application using connection AFW failed, due to: java.io.IOException: invalid content type for SOAP: TEXT/HTML. Setting message to status failed.
Previously, it was working fine. But today I am getting the errors. Could any one please explain, what exactly the reason is. I searched the Forum, but didnt find a proper resolution. We are sending the same set of data to the Webservice, which we were sending before. Please suggest.
Regards,
Subhendu

Hi Vijay,
I am wondering,Without this module, how it was working fine for so many days. Could you please throw light?
Regards,
Subhendu

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 200 OK

hi all,
please help me to resolve the error. i am working on a proxy to soap scenario and in SXMB_moni i am getting the following error.
i had check my url,its working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 200 OK</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>*
thanks
kasturika

Check this thread
Receiver SOAP Adapter Error: invalid content type for SOAP: TEXT/HTML
might give you some directions to look at.
Sameer

EROR: java.io.IOException: invalid content type for SOAP: TEXT/HTML

hi group,
my problem is related to scenario HTML to WebService in which im trying to send a request to a free webservice on internet and retrieving the response back and showing it in my html page.
scenario in detail:
i have a html page deployed on my tomcat server at my local m/c. in which im taking a email string and sending it to webservice which checks whether the email string has a valid email format or not and in response, webservice returns a boolean true/false depending on the email string. i want to show this boolean result n my html page.i have configured HTTP adaptor and SOAP adaptor for this and interfaces are scynchronus.
im able to send my request to webservice and getting the response also...i checked in trace..it shows message request sent and response recieved...here is the trace..
http://hcl3sap:50000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
but i get an error java.io.IOException: invalid content type for SOAP: TEXT/HTML after that,
Does anyone know where im going wrong....
regrds

you are very correct..i used SOAP reciever as http://www.webservicex.net/ValidateEmail.asmx?wsdl and SOAP Action as http://www.webservicex.net/IsValidEmail but getting the same error.
and if you look in the trace above it says that my request actually went to webservice and got a response also (response code 200) but i think after recieving the message from webservice something is wrong. either mapping is not correct...(but i tested that ..it works fine) or could be my company firewall is prohibiting the message sent by webservice to XI server (i have given proxy settings with password also)...im NOT sure on this ....
second thing i noticed in moni while examining the trace was....message payload under "Message Branch According to Receiver List " shows this value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net">
<ns1:Email>samWhgf.com</ns1:Email>
</ns1:IsValidEmail>
and then in just next step "Request Message Mapping" payload is
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
i dont know really why payload is getting appended and if it is correct or not? but after this step further payload goes in this appended format only till call adaptor...if this is so i assume my message is going to webservice as
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
which is not the proper format to be recieved by the webservice without any input value i.e "samWhgf.com"
im confused on this ..whether this is the route cause or any other...i have been trying to figure out the root cause from some days but still unsuccessful.
please provide ur valuable inputs.
regrds
Sameer

Issue in Dynamic configuration in SOAP receiver channel

Hi All,
My scenario is file to SOAP. At receiver side I want to generate URL dynamically.
To proceed step by step, I started with passing a constant URL to Dynamic configuration UDF.
mapping:
Dynamic conf. UDF
Channel Configuration:
From testing, I found that channel always takes the url given in Target URL field and dynamic URL in TserverLocation is been ignored by the channel.
That is dynamic configuration is not working completely.
I went through a lot of blogs and also tried a lot of trial and error methods, but none helped. Every thing I configured looks perfect for me, but still not working. I don't understand where I went wrong. Please help me.

Hi Experts,
I am facing similar issue,
URL --> UDF --> @dynamicvariable
I have created a variable underparent node eg: DESADV-->dynamicvariable
passed complete URL to UDF, below is the UDF
& configured SOAP Receiver Channel as well. This is IDOC to IDOC scenario, using IDOC_AAE on sender side and SOAP on receiver in single stack.
--> Checked ASMA
--> Checked Variable Transport Binding and given "TServerLocation" without quotes in XHeaderName1
--> Target URL: http://
But when I am running this interface, nothing is coming in Dynamic configuration.
Ref: Message Log:
MM and OM is also perfect in ESR.
Any suggestions? Please advice.
Regards
Singh

Error in SOAP receiver channel: java.io.IOException: invalid http response:

Similar Messages

Maybe you are looking for