Error in SOAP receiver

Hello All,
I am getting the below error in the sender communication channel for FILE - PI -SOAP scenario.
i am using integrated configuration in configuration.
"Transmitting the message using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: Could not determine mapping steps for message c24a403b-b048-11e0-9c28-00001e07abf4."
Specified operation mapping in the integrated configuration correctly. cache is also up to date.
Could you please let me know what could be the issue.

Hi ,
Pleas make sure your system is PI 7.1 EHP1 otherwise you cant do this.
also you cant use ABAP mapping or paremeterized mapping with AAE also dont able to see error message in SXMB_MONI
I will suggest you to go with classical approach. or Atleast first test the end to end interace with classical ID IR approach.
And then go with AAE for performance improvement
Your error may be for response mapping for SOAP.
Please set messaging.syncMessageRemover.removeBody" parameter to "false",in the SAP XI AF Messaging Service
refer this help.
http://help.sap.com/saphelp_nw04s/helpdata/EN/59/25ee41c334c717e10000000a155106/frameset.htm
This .property will allow you to error analysis soap response.
Do you have any fault message structure and mapping in SOAP receiver side?
Do a dummy change in the maaping and activate and then do complete cache refresh0
Delta Cache Refresh:
CPA-Cache and Mapping Runtime Cache are updated independently, i.e.
1.
Mappings objects per activation/change are transferred to ALL Mapping Runtime Caches of all Advanced Adapter Engines
2.
CPA-Cache-Refresh is usually carried out after activation/change of directory objects. Objects are just transferred to the Advanced Adapter Engine where configured to be used
Can be viewed in the Cache Monitoring of the RWB. (other monitoring is reused; no SXMB_MONI).
Refer this:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?quicklink=index&overridelayout=true

Similar Messages

Error on SOAP Receiver for Axis

Hi all,
Is there anybody to help for solution?
Thanks.
Error on SOAP Receiver for axis
Error Message
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@3ff5ea5d for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

We deployed com.sap.aii.af.axisproviderlib.sda to use SOAP for axis.
We sent data from SAP to Axis, error below ocured?
What must we do to solve problem?
Thanks.
Error
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: org.apache.axis.ConfigurationException: handler is not instantiated org.apache.axis.ConfigurationException: handler is not instantiated at com.sap.aii.adapter.axis.modules.HandlerCore.process(HandlerCore.java:73) at com.sap.aii.adapter.axis.modules.HandlerBean.process(HandlerBean.java:75) at sun.reflect.GeneratedMethodAccessor360_10000.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy2634_10000.process(Unknown Source) at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:275) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1431_10000.process(Unknown Source) at com.sap.aii.af.app.listener.AFWListenerBean.onMessage(AFWListenerBean.java:332) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1479_10000.onMessage(Unknown Source) at com.sap.engine.messaging.impl.spi.ServicesImpl.deliver(ServicesImpl.java:314) at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1000) at com.sap.engine.messaging.impl.core.queue.consumer.RequestConsumer.onMessage(RequestConsumer.java:73) at com.sap.engine.messaging.impl.core.queue.Queue.run(Queue.java:921) at com.sap.engine.messaging.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

Hi all,
We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
We are running PI 7.4.
Any help is appreciated.
Thanks,
Pushpa

Hi,
Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
1. Test a fresh message from local SOAP UI tool.
2. Pick 3rd party WSDL file and Import in SOAP UI tool.
3. Put some dummy data for mandatory fields
4. Trigger it msg and ckh if you get successful / response msg.
5. Check if firewall is open and that URL is not blocked.
Hope it helps
Regards,
Azhar

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

Error in SOAP Receiver channel

Hi,
We are working on IDOC to SOAP Scenario (Connecting to third party).
We have configured the SOAP Receiver channel with the Target URL and teh corresponding SOAP Action.
But the SOAP Receiver channel gives the error while processing and sends back the following error message in log :
"Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Value cannot be null. Parameter name: s."
Payload seems to look fine in XI and SAP.
Any help on this ?
Thanks and regards,
Vikas

Hi Vikas,
Copy the payload from SXMB_MONI after mapping and check with SOAPGUI or Altova, if it working fine then your payload is good. You can use the WSDL to ganarate and send independent soap request from these tools.
Besides this IDOC is Asyc, you need to use RequestResponseBean and ResponseOneWayBean to get the response from SOAP. Check the following and try to simulate it.
https://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without+BPM%29
Server was unable to process request. ---> Value cannot be null. Parameter name: s."
The error specifies that the request has null value, check the parameter specified in the error message and make sure that is not null while you are sending the request.
Regards,
Prasanna

Error in SOAP receiver channel: java.io.IOException: invalid http response:

Hi experts,
I have a IDOC to SOAP scenario where SOAP receiver channel is sending data to web service. In the receiver channel I am getting error as below. Kindly help me to resolve this issue. Thanks.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null"

Did you check this?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards
Pothana

"Unauthorized" error for SOAP receiver channel

Hi all,
I have a scenario in which I am calling a .NET web service from a UDF in which the XML payload is constructed manually. I have configured a SOAP receiver channel. Also, since the web service needs certificate authentication, I have checked the corresponding parameter in the SOAP channel and selected appropriate client certificate.
When I execute the mapping, I get the following error -
com.sap.aii.mapping.lookup.LookupException: Exception during processing the payload.Problem when calling an adapter by using communication channel SOAP_RCV_IMWS_Change (Party: , Service: IMWS, Object ID: dda07d364ca73d4ab9e89e562a971b36) XI AF API call failed. Module exception: 'com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'. Cause Exception: 'invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'.
Is this related to error in certificate authentication process, OR wrongly formed XML payload OR anything else ?
Regards,
Shankar

No. I didn't provide any login info. The web service doesn't specify username login requirement. Instead, it needs client certificate for authentication, which I provided in SOAP receiver channel.
I am testing the web service by executing the message mapping. The web service was executed successfully from its 'Test Page' like for SAP web services we have web service navigator. So it runs ok from that test page, but gives error when called from UDF.
Regards,
Shankar

"Invalid content type" error in SOAP receiver

Hi ,
I have ABAP Proxy->XI->Webservice scenario.
I have configured the SOAP receiver with all neccessary information (Target URL pointing to WSDL , proxy details)
However i get the following error when i try sending data to the webservice. "Invalid Content type for SOAP: text/html"
I have seen some forums and blogs on this site on this but still not able to solve the error.
Please advice...

Hi Anand,
Have a look into this thread- similar discussion
DeliveryException:: invalid content type for SOAP: TEXT/HTML
Also check this- in the Reciever SOAP Adapter configuration i.e Target URL must be url of the WSDL.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40728f7b-0401-0010-d9bc-8c73884a3789
Hope this helps.......
Regards,
Abhy

Getting error in SOAP receiver in RWB

Hi Experts,
we have some problem in soap receiver.
scenario name is PROXY TO SOAP.
firewall is open already
WEB service team not able to get the message from PI. wHEN WE MONITOR Receiver soap communication channel we are getting the below error.
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The message with Action '' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None)..
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The message with Action ' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None).
when we load the receiver url(webservice url) we are getting the the xml message.
please help us.
thanks
Elton
Edited by: eltonsaranya on Feb 23, 2012 12:47 PM

Hi Elton,
Most probably you need to type the SOAP Action in the receiver Communication Channel. You can find it in the .wsdl file for your scenario in the following tag:
<wsdl:operation name="SaveShipment">
<wsdl:input wsdl:Action="http://namespace.com/Integration/SomeAction" name="SomeAction"/>
</wsdl:operation>
In this case, you would use the following SOAP Action in your receiver channel: http://namespace.com/Integration/SomeAction.
Hope this helps,
Greg

Error in SOAP receiver adapter.

Hi All,
<b>Problem</b> : Receiver soap adapter not working
1)I have used Java mapping which is working fine.
2)After sending message; In RWB the SOAP channel is shown INACTIVE.
3)In SXMB_MONI it is shown successful.
4)My username pwd is right.
4)My wsdl path is right.
5)I am not using any security certificate.
6)Web service is tested.
I dont know what exactly is the problem
Please help.
regards,
Sumit

Hi,
Sorry for late reply.
This is what i got from message monitoring:
Time Stamp Status Description
2007-07-23 11:18:52 Success Message successfully received by messaging system. Profile: XI URL: http://hydhtceaixi1:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2007-07-23 11:18:52 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-07-23 11:18:52 Success Message successfully put into the queue.
2007-07-23 11:18:52 Success The message was successfully retrieved from the receive queue.
2007-07-23 11:18:52 Success The message status set to DLNG.
2007-07-23 11:18:52 Success Delivering to channel: Invoice_info_receive_CC
2007-07-23 11:18:52 Success SOAP: request message entering the adapter
2007-07-23 11:18:53 Error SOAP: call failed
2007-07-23 11:18:54 Success SOAP: sending a delivery error ack ...
2007-07-23 11:18:54 Success SOAP: sent a delivery error ack
PLease help as I urgently need to make this working.
Thanks for showing interest.
Regards,
Sumit Oberoi

Error in SOAP Receiver Adapter with HTTPS

Dear All,
I am developing a SOAP to SOAP scenario with HTTPS i.e. client without authentication and I am facing an issue with the receiver adapter. Few messages fails in the receiver side while rest are successful.
Error - Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: Failed to get the input stream from socket: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
Please let me know what can be the reason for the error.
Thanks and Regards,
Rana Brata De

Hi Rana,
Check the certificates sequence as well the certificates end dates in STRUST in SAP PI system. if, deployed in NWA level check over there.
One more :: sending the data to web server or web page. make sure, PI is pointing to which server.
Regards,
Kesava.

Soap Receiver adapter - 401 error

I am getting following error with soap receiver,
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 401 Unauthorized
I am able to consume the webservice with SOAP UI without any difficulty. I have tried with both the endpoint URL and WSDL url without success. I have tried with/without 'Do not use SOAP envelope'. I am not sure what is wrong. When the message is sent via PI, he is not able to look at the payload (while performing the trace) , while he is able to view the actual soap message with SOAP UI.
When i type the ENDPOINT url in my http address, i get a 'page not found' error.
Any ideas as to what i could be missing?

One more interesting behaviour when I was sending from SOAP UI, The request was posted twice, meaning there were two POST actions in my TCPGATEWAY listening port, while there was only one request via PI.
Wnen my partner put a trace, the SOAP envelop was missing in their TRACE for PI file while the SOAP envelop was available for SOAP ui message (in the second request). Could it have something to do with a fact that we are doing HTTP 1.1with soap uI While PI is HTTP 1.0 (HTTP 1.1 being a persistent connection resulting in second request)
Trace on the partner side,
PI Message
POST /Services/Calculator/Version1/Calculator.asmx HTTP/1.0
accept: * / *
host: www.html2xml.nl
user-agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
callingtype: SJM
content-id: <soap-4EB90CC8537E011DE1008000CDEB6913>
content-type: text/xml; charset=utf-8
content-length: 888
SOAPAction: "http://tempuri.org/Add"
HTTP/1.0 401
WWW-Authenticate: Basic realm="CASM"
Content-Type: text/html;charset=utf-8
Content-Length: 40
Date: Thu, 10 Nov 2011 11:50:13 GMT
Connection: close
SOAP UI log
POST /Services/Calculator/Version1/Calculator.asmx HTTP/1.1
accept-encoding: gzip,deflate
content-type: text/xml;charset=UTF-8
soapaction: "Create"
user-agent: Jakarta Commons-HttpClient/3.1
host: www.html2xml.nl
content-length: 2496
HTTP/1.1 401
WWW-Authenticate: Basic realm="CASM"
Content-Type: text/html;charset=utf-8
Content-Length: 40
Date: Thu, 10 Nov 2011 12:04:40 GMT
POST /Services/Calculator/Version1/Calculator.asmx HTTP/1.1
accept-encoding: gzip,deflate
content-type: text/xml;charset=UTF-8
soapaction: "Create"
user-agent: Jakarta Commons-HttpClient/3.1
content-length: 2496
authorization: Basic U1lTX1dFQl9TQVBQSTo=
host: www.html2xml.nl
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/";
</soapenv:Envelope>
HTTP/1.1 200
Set-Cookie: JSESSIONID=A48C8808315935EFD7AFBA8B4B96FC62; Path=/xx
Keep-Alive: timeout=1200000, max=1000
Connection: Keep-Alive
Content-Encoding: gzip
Content-Type: text/xml;charset=utf-8
Content-Length: 2882

SOAP Header in SOAP Receiver adapter

Hi All,
I am doing a Proxy to Webservice scenario where webservice requires the SOAP request as below.
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP-ENV:Header>
        <mh:CustomHeader xmlns:mh="http://schemas.test.com/customHeader">
            <mh:MessageData>
                <mh:MessageId>12345</mh:MessageId>
                <mh:Timestamp>2004-06-09T14:41:44Z</mh:Timestamp>
            </mh:MessageData>
        </mh:CustomHeader>
        <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/04/secext">
            <wsse:UsernameToken>
                <wsse:Username>test</wsse:Username>
                <wsse:Password>test123</wsse:Password>
            </wsse:UsernameToken>
        </wsse:Security>
    </SOAP-ENV:Header>
    <SOAP-ENV:Body>
    </SOAP-ENV:Body>
Need your help to understand how can we achieve this using Standard SOAP adapter to customize the Header part as it requires to include "<mh:CustomHeader " & "UsernameToken".
Or Do i need to go for adapter module development to create this SOAP request.
Please provide your suggestion to achieve this scenario.
Thanks & regards
Ashwin
Edited by: ashwin dhakne on May 17, 2010 5:32 PM

Hi all,
Created a below target payload in a message mapping with SOAP Header & Body part as per the requirement.
In SOAP receiver communication channel, checked the option " Do Not Use SOAP Envelope".
But while executing an sceanrio, i am facing an error in SOAP receiver channel as Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
And if i don't check the option " Do Not Use SOAP Envelope" it gives an error as
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Unable to obtain service binding,error=Payload Envelope is not a known message for TestWebserviceService.
Please provide your suggestions to handle this issue.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Envelope xmlns:ns1="http://schemas.test.com/CustomrHeader">
<ns1:Header>
<ns1:CustomrHeader>
<ns1:MessageData>
<ns1:MessageId>Constant</ns1:MessageId>
<ns1:Timestamp>Constant</ns1:Timestamp>
</ns1:MessageData>
<ns1:Security>
<ns1:UsernameToken>
<ns1:Username>Constant</ns1:Username>
<ns1:Password>Constant</ns1:Password>
</ns1:UsernameToken>
</ns1:Security>
</ns1:CustomrHeader>
</ns1:Header>
<ns1:Body>
<ns1:Details>
<ns1:Information>
<ns1:Title>Test</ns1:JobTitle>
</ns1:Information>
<ns1:Contacts>
<ns1:Street>Test Drive</ns1:Street />
</ns1:Contacts>
</ns1:Details>
</ns1:Body>
</ns1:Envelope>
Thanks
Ashwin
Edited by: ashwin dhakne on May 18, 2010 5:47 PM
Edited by: ashwin dhakne on May 18, 2010 5:48 PM
Edited by: ashwin dhakne on May 18, 2010 5:48 PM

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

Error while signing in SOAP receiver channel

Hi,
I have a Source PI which is sending a XML message to a target PI through SOAP adapter. Its a secure commnication. I am using message level encryption and signing on the source receiver agreement and message level decryption and validation on target sender agreement. The message is failing in the SOAP receiver cahnnel on source PI with the below error message. Also, I am using a certificate which is signed by Verisign and its valid for two years. I have checked the validity, it has not expired yet.
It works fine if the certificate is signed by SAP(that is, test certificate which is valid for 8 weeks).
Error Message
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: verify( Message, byte[], CPALookupObject ). Message: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: verify( Message, byte[], CPALookupObject ). WSSEThread-Exception: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).; To-String: com.sap.aii.security.lib.exception.SecurityException: SecurityException in method: run(). Message: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.).. To-String: com.sap.security.core.policy.exceptions.VerifyException: [_policy0230] The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.). at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:996) at sun.reflect.GeneratedMethodAccessor546_10002.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy2684_10002.process(Unknown Source) at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:275) at

Hi,
as per the error message is:
"... The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.) ..."
I guess the cert. setup either on your side or the other system's side is not fully correct. Check whether all cert., priv keys and public keys are exchanged propperly and setup as trusted certs.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 9, 2009 1:24 PM

Error in SOAP receiver

Similar Messages

Maybe you are looking for