ERROR IN SOLUTION MANAGER4.0

WHILE INSTALLING CENTRAL INSTANCE FOR SOLUTION MANAGER 4.0, AT "CREATE USERS FOR SAP SYSTEM" GIVES FOLLOWING ERROR
"unable to create account \dbdb2mnt"
host name : solsrv
sap sid: sm4
db id: db2
i m not getting the where is to create \dbdb2mnt account.
is it for solsrv\dbdb2mnt or else.
there is \dbdb2mnt account group at os level
pls help me someone.......................

Hi,
R u installing in HA, actually if you are installing in HA, you need to create the OS/DB users on both the nodes before starting the CI installations. You can create the users using the SAPinst itself..
Mahesh

Similar Messages

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work. I can't uninstall program. Error upon error.

Hi John,
I'm trying to install the SunMC 3.5.1 Console on
Windows XP with not much success. The install
displays the initial splash screen, but then fails
with the error :
The install wizard cannot proceed.
Aborting installation now...First, are you installing from a complete SunMC CD or CD image? If you just copied some files out of a CD/image you may have missed some jar files.
SunMC Consoles don't like to share systems with older versions of themselves. Try moving/renaming the directory your 3.5 Console is installed in (or uninstall it if you don't need it),... then try putting 3.5.1 in again.
All my demos/work/courses are on 3.5.1 on an XP laptop, so I know it works.
I think it's probably just not happy about 3.5 already being installed... so just move it out of the way for awhile to get 3.5.1 in (then put 3.5 back so you can have them both).
Regards,
Mike
The Java version is 1.4.2_03 .
The Release Notes etc don't give any clues.
Strangely, SunMC 3.5 works fine on this desktop..
Any ideas as to where I can go from here? This is
effectively stopping me from going from SMC 3.5 to
3.5.1, unless I can get the Console working..
Has anyone else had problems with SMC 3.5.1 on XP?
Thanks in advance.
John

Error during solution manager 3.2 installation.

Hi !
I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
Getting ther following error -
"CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
"CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
Kindly suggest the solution.
Regards-
sanjay

hi Markus!
The ora_sql_results.log file shows the following-
"2007-06-07, 18:32:21 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT / AS SYSDBA
SHUTDOWN ABORT
@CONTROL.SQL
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
EXIT
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Connected.
ORACLE instance shut down.
SP2-0310: unable to open file "CONTROL.SQL"
ORA-01012: not logged on
ORACLE instance started.
Total System Global Area 546906764 bytes
Fixed Size               455308 bytes
Variable Size            293601280 bytes
Database Buffers       251658240 bytes
Redo Buffers              1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
ALTER DATABASE ARCHIVELOG
ERROR at line 1:
ORA-01507: database not mounted
ALTER DATABASE OPEN
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
What to follow... pls guide
Regards-
sanjay

Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

"Error 16" solution doesn't solve problem, same error message pops up. Further steps?

Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!

Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

Hello,
Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
Id: [email protected]
Thanks,
Regards,
venkat reddy.

Hello Venkat,
You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
Basically after the installation,
1. try to stop and start the SAP System
2. you need to check if you can access the SAP System.
3. Apply the permanent SAP license
4. Perform the configuration via IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
Hope this could help you.
Regards,
AZLY

Solution manager4.0 error at point of import java dump.

hi gurus,
While installing solution manager 4.0, I am getting error at point of import java dump.
for any suggestions appreciated.
OS : windows 2003 server
Sql : SQL 2005 server
log file:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Nov 7, 2007 2:49:22 PM com.sap.inst.jload.Jload main
INFO: Jload -sec DSM,jdbc/pool/DSM,
MEMSRV407/sapmnt/DSM/SYS/global/security/data/SecStore.properties,
MEMSRV407/sapmnt/DSM/SYS/global/security/data/SecStore.key -dataDir D:/SAP_Solution_Manager4.0_SP2/Javacomponents\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Nov 7, 2007 2:49:35 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
Nov 7, 2007 2:49:35 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][NWMss][SQLServer JDBC Driver]The requested instance is either invalid or not running.
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.connect(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
     at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
     at com.sap.inst.jload.Jload.main(Jload.java:580)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Thanks
Ramana

HI,
You are using java 1.4.2_13... which is ok but i would recomend to use 1.4.2_09.. and download your export cd's again.
Thanks,
will fix it.

Adobe creative cloud, App Error ! [Solution]

I have this error.
I have reinstalled the file alot of times.
Rebooted.
Deleted all the files, I found on many forums. Such as OOB and etc.
This solution is not a SOLUTION TO THE CREATIVE
CLOUD,BUT A WORK AROUND. This is a link to a
website. This website requires you to download cookies
and download the APP files directly.
Adobe CC 2014 Direct Download Links: Creative Cloud
2014 Release | ProDesignTools
If anyone has a better solution please post.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

SAPGUI for Java 7 rev 3 - error in Solution Manager

I am trying to view a document through tcode SOLAR02 (on Java based GUI) and I get below error. This works fine on SAPGUI 640 version. Any clue why it throws this dump?
Exception condition "DP_ERROR_GET_DATA" raised.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLCNDP" or "LCNDPU09"
"DP_GET_TABLE"
or
"SAPLCNDP" "DP_ERROR_GET_DATA"
or
"SOLAR_START " "DP_ERROR_GET_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLCNDP" - in "DP_GET_TABLE".
The main program was "SOLAR_START ".
In the source code you have the termination point in line 120
of the (Include) program "LCNDPU09".

Hello,
please create a bug report on component BC-FES-JAV using the <a href="http://service.sap.com/message">message reporting page on service market place</a> and add a trace according to <a href="https://service.sap.com/sap/support/notes/683960">note 683960</a>.
In addition to the default trace keys, please also activate key DP.
Best regards
Rolf-Martin

HP OJ 8500A Blue Screen with error c0260000 (Solution)

The root cause of this error occurs only when a Linksys router sends “0” value parameters to the HP Officejet Pro 8500A e-All-in-One series for IPv6 renewal.
Use the following steps to disable IPv6.
1. Go to the Embedded Web Server EWS, click the Network tab, and then click Network Protocols .
2. Change the setting to Enable IPv4 Only .
3. Click Apply , and then click OK to save the setting.
4. Send a print job and make sure the printer prints successfully
If any error appears, click OK or refresh the EWS page.
1. Click OK , or refresh the web browser manually to remove the error message.
2. Go to the EWS, click the Network tab, and then click Network Protocols .
3. Change the setting to Enable IPv4 Only .
4. Click Apply , and then click OK to save the setting.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
This question was solved.
View Solution.

Fadigem wrote:
Hello Praveen,
I have actually disabled the IPv6, and the printer worked fine for 5 days but then the same problem occurred!!
I went to Control Panel / Network & Internet, to check if IPv6 was enabled automatically, but I found it to be still disabled and my printer is doing this crazy blinking again.
Please advise back. I'm really tired of switching it on and of again, and having to apologize to my clients all the time for not receiving their faxes!!
Thanks
Hi,
Is the printer connected in wireless??? Connect the printer using ethernet cable and this issue should not comeup again. Also check if the router has latest firmware installed. If all fail, contact HP Tech support.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Logic Pro 9.1.7 + Imac 2010 + 10.7.4 + Firewire = Audio Error and Solution.

Hi all,
This post is the end of a weeks long hair pulling, to save other people the pain of my past week, here is a quick rundown of the issue and the solution that for us at least worked.
All the software is legit and fully updated btw, before people ask.
Logic Pro 9.1.7 on 2010 Imac on 10.6.x, Refx Nexus, Sylenth plus many other VST's and Au's, Mackie Pro + Extender, 2 Midi Keyboards (Oxygen 49 and Alexis 49) and with a M-Audio 410 external soundcard running 10.1.3 driver, all working.. only issue we had was when copying midi between tracks into differing plugins the midi would corrupt the plugin requiring a restart of Logic.
This error we later discovered was due to midi automation for plugins being copied over, but that is not this issue.
Updated OS from 10.6 to 10.7.4 by way of 10.7.4 Combi Update. Removed M-Audio Drivers and then installed 10.7.4,
Installed brand new GRAID 4TB external disk (Raid 0 at 64kb block sixe) and connected M-Audio 410 via daisy chain.
Installed M-Audio Drivers, all ok.. at first..
Graid is 800, M-Audio is 400.. Connected as Imac -> GRaid -> Maudio
At first, its good, no issues.
Copied over a whopping 550GB off Imac onto external.. then later on, rebooted mac and started working on music.
Ran Logic Pro (64bit mode), whilst using Midi with Nexus we discovered the Audio at first was ok, but quickly over time degraded to where the sounds started becoming distorted, the more we went on, the more the distortion increased, after a while the midi notes were just sounding awful.
Rebooted mac
Started using Logic again, not 1 minute in, External drive and M-Audio disconnected themselves from the Mac.
Rebooted
Hard drive now seen, no M-Audio.
Now though, even using Itunes or Quicktime or VLC on any mp3 via internal soundcard, quality was.. well terrible. Within 2 seconds of hitting play, you knew it was bad.
Shutdown, removed external drive from chain, rebooted Mac -> M-Audio
M-Audio now seen, sound quality dreadful, shutdown Mac, rebooted without M-Audio, sound still awful just on Internal audio.
Time passes, I smoke too much, prod and poke and eventually reach for the install media
(Lots of shutdowns and restarts in next bit, after each line, also carefully reset and tested every Audio setting.)
Removed M-Audio driver
Installed 10.7.4
Installed M-Audio
All good again.
Later, as a test, connected External drive on its own, no M-Audio
All good.
Second test, added External Drive plus chain to M-Audio
Not good, M-Audio seen but even though sound bars showing on M-Audio software, no sound out to mixer
Removed External Drive from Chain, M-Audio now straight to Mac.
All BAD; sound was terrible,
Disconnected M-Audio
Playing any Mp3 via internal Audio, terrible..
Whatever happened, has thrown the entire Audio system into a mess, again!.
Removed M-Audio driver.
Reinstalled 10.7.4
Reinstalled M-Audio Driver
All good, on internal or external Audio
Disconnected M-Audio
Reconnected External Drive Only
Drive OK, Internal Sound OK.
Removed External drive
Reconnected M-Audio
All ok, internal or External.
Ok, Final conclusion.
When the M-Audio (400FW) is connected to Mac via External Drive (800) the Audio is knackered from that point onwards on 10.7.4, removing M-Audio drivers and re-installing makes no difference, even the Internal Sound is knackered.
Only solution at this point, remove M-Audio driver, reboot, reinstall 10.7.4, reboot, reinstall M-Audio Driver, reboot.
Then its all good again.
My guess is this, and I am probably wrong but it is all I can think of.
When the M-Audio is daisychained the Mac changes a setting somewhere, probably to adjust for high latency, at this point it is written somewhere (either as a file or as DSP bios setting) that is not being reset.
This is why it is completely broken until 10.7.4 is re-installed at which point whatever setting it is that was changed, is reset.
This is all I can think of, I have posted this so that if someone else in the weeks ahead has a similar issue, it will save you the stress and late nights I had this past week.
Take care all.

I was seeing the same problem... I'm a new Logic user, switching from DP, and so it was a minty fresh install of Logic Pro 9.1.7 under ML.
It turned out to be a third party graphics driver that was screwing up some internal process: specifically, the dirver for AirDisplay, an iOS app that lets you use an iPad as a portable monitor. When I removed the driver, the problem cleared up instantly, and I have done 9 hour sessions in Logic since then without a single hiccup.
If you're running a third party driver, remove it, repair permissions and see if the problem clears up.

Error in Solution Manager - Service desk

Dear all Hi,
i need your help please.
i try to create o service desk message from an ERP system -> Solution manager.
when i have SAP_ALL (for the user in the Solution Manager system) the message is created fine
and i can see it and proccess it fine.
when i take off SAP_ALL i get the following error : 'Because of error 513, no message was created in Support Desk System'., even though i have the following authorizations to the user:
SAP_S_RFCACL
SAP_SMWORK_INCIDENT_MAN
SAP_SUPPDESK_CREATE
SAP_SUPPDESK_DISPLAY
SAP_SV_FDB_NOTIF_BC_CREATE
can someone please help ???
thank you in advance.
George

Please find the following points which cause error 513.
1. The client was not completely created by the copy of Client 001.
2. The BCOS_CUST table was not maintained correctly.
3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE).
4. Incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO).
5. Number ranges are not assigned correctly.
6. The logical system is not defined.
7. Modification of the standard settings of the message type SLF1.
Thanks,
Venkat

Error in Solution Manager 4.0 Installation

When installing Solution Manager 4.0 on Windows server 2003 with Oracle 10g, Installation
failed at Import ABAP.
The Error message is :-
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log
file(s) import_monitor.java.log, import_monitor.log.
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 5, completed 12, failed 0, total 18.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 5, completed 12, failed 1, total 18.
Import Monitor jobs: running 1, waiting 4, completed 12, failed 1, total 18.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 12, failed 2, total 18.
Import Monitor jobs: running 1, waiting 3, completed 12, failed 2, total 18.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 0, waiting 3, completed 12, failed 3, total 18.
Import Monitor jobs: running 1, waiting 2, completed 12, failed 3, total 18.
Loading of 'SAPSDOCU' import package: ERROR
import_monitor.log
WARNING: 2006-07-27 09:47:26
Cannot start import of packages with views because not all import packages with tables are
loaded successfully.
WARNING: 2006-07-27 09:47:26
4 error(s) during processing of packages.
INFO: 2006-07-27 09:47:26
Import Monitor is stopped.
The Java version we are using is - j2sdk-1_4_2_12-windows-i586-p
Any guidance will be appreciated
Thanks
Gireesh

ganesh if solved ur problem plz help me
my solman 4 running since 3 days at import abap 16 phase of 42.
plz help me
following error in log
INFO: 2007-04-19 20:36:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is successfully completed.
INFO: 2007-04-19 21:40:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
WARNING: 2007-04-19 21:40:22
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2007-04-19 21:40:22
1 error(s) during processing of packages.
INFO: 2007-04-19 21:40:22
Import Monitor is stopped.
and
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Returncode of C:\j2sdk1.4.2_12\bin\jar.exe: 0
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Jar file local_policy.jar is not included in zip file F:\sldprofile.zip, returning false
TRACE [iaxxdlghnd.cpp:657]
CDialogHandler::doHandleDoc()

Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users

Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
Frank

Dear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat

ERROR IN SOLUTION MANAGER4.0

Similar Messages

Maybe you are looking for