Error in Source System Activation
Hi
When i am activating/restoring CRM Source System, i am getting following <b>Error</b>:
The following errors occurred in the source system: RSAR 374
Result of the destination check: Timeout RSAR 375
There is also a <b>short dump</b>:
Runtime Error CALL_FUNCTION_REMOTE_ERROR
Date and Time 27.09.2007 16:45:22
ShrtText
"Password logon no longer possible - too many failed attempts"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAC" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The error occurred in an RFC call to another system.
The target system has also written a short dump.
Consult this short dump for more precise information about
the cause of the error.
What could be the problem?
Your suggestions are welcome....
Regards
Prasad
Hi Srikanth,
Thanks for the quick reply.
RFC Connection Test is OK through SM59 in both the systems.
Short Sump Analysis :
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Regds
Prasad
Similar Messages
-
Source System Activation Error
Hi,
We Upgraded BW3.1 to BI7.0, we did successfully on Development. but when in QA when I was trying to activate RFC by going to RSA1 and right click and activate it is showing errors like
Source system XXX300 is inactive RSAR 5
BI unknown in source system RSAR 8
BI IDoc type ZSBB025 is not the same as source system IDoc type RSAR 371
The following errors occurred in the source system: RSAR 374
EDI: Partner profile not available E0 332
Entry in inbound table not found E0 414
Entry in outbound table not found E0 400
Entry in outbound table not found E0 400
Am I missing anything ?
Thanks,
ChanderHi
As a part of sanity check did you perform rituals as below -
Below deletes the BW-specific information in the source system that does not have a connection to the BW System.
1. Log on to the source system in question
2. Call Transaction SE37
3. Enter function module name 'RSAP_BIW_DISCONNECT'
4. Select the 'Sngl. test' function.
5. Enter the name of the BIW system for the import parameter 'I_BIW_LOGSYS' that matches the one prior to the new installation
6. Enter the name of the source system for the import parameter 'I_OLTP_LOGSYS'
7. Choose the function 'Execute'
and then
Transaction SE37 - function module RSAP_BIW_CONNECT - Single Test. Parameter:
I_LANGU <language of the destination to BW>
I_SLOGSYS <OLTP Source system (SLOGSYS from RSBASIDOC in BW)>
I_LOGSYS <BW system (RLOGSYS from RSBASIDOC in BW)>
I_STEXT <name of the OLTP system>
I_BASIC_IDOC <BIDOCTYP from RSBASIDOC in BW>
I_SAPRL <SAPREL from RSBASIDOC in BW>
I_RESTORE
I_TSPREFIX <TSPREFIX from RSBASIDOC in BW>
I_PREFIXE <35 times second byte of TSPREFIX from RSBASIDOC in BW
(Example TSPREFIX = 'BA', then
I_PREFIXE = 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA')>
Hope it Helps
Chetan
@CP.. -
Urgent Help! Errors in source system(RSM 340)
Need urgent help. Issue in production.
I added fields to the COPA datasource, by changing the operating concern. I recreated the datasource with the same name replicated into BW & ran delta again. The whole procedure worked fine in Dev & Quality but in production it gives me the below error. I thought its a delta issue so I deleted the data & try reload but still same issue. Below is the error. I checked the connection with R3. its an ok. All other loads work fine. Before deleting delta, it gives below error & when you rerun, it finishes with zero records. I also tried activating update, transfer & ods & cube in BW. I also asked functional guy to check operating concern & its active. kindly help
Errors in source system RSM 340
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.Hi PK,
caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
i think you get the error message as follows. file is in the client workstation as like.
better you contact basis people. they will resolve this.
hope this help you
Regards
Harikrishna N -
hello gurus, I have a Infosource name 2LIS_05_QE2, I haved assigned 4 Source System namely (CD1513, GP1590, TD1511, WD1511), It uses a Function Module in R/3 and Appended Structure (I've already transported the FM, Appended DS, Function Group and the Zsextractor assignment), I don't have any problems in activating other Source System (CD1513, GP1590, WD1511) only in TD1511, I can't activate the Transfer Rule and Im getting the error,
"Error in source system TD1511 "
Ive already replicated the Source Ssytem and only in T Cluster Im currently experiencing the said problem, I even go to Source System and right click on the T Cluster to check, and the connection is ok, What maybe the caused of the said problem? thank you very much... I really appreciate any help...Ive fixed it, Ive check all the R3 box 2 by 1, and T Cluster was down, by the way thanks, The Checking of connection in BW is so confusing because it says "OK", but when I check each cluster individually, I noticed it was down, Thank you very much,I will give you a score
-
Hi,
I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
"incorrect input for activating transported shadow IPacks"
Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
Please let me know what is the caused of the error and how to solve the problem.
Thanks for your kind help.
Regards,
MarkHi Mark,
Which version of BW are you in?
check this thread and also the note 709581
Error Deleting Source system connection
Thanks,
Raj -
Hi Friends,
I got an failure with a data load... The data was loading into ODS from r/3. The data source name 2lis_03_bf... I got an error like this in status Tab -
<b>Error message from the source system</b>
<b>Diagnosis</b>
An error occurred in the source system.
<b>System response</b>
An error occurred in Extractor .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
<b>the error message:</b>
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.
And when we click on the error message push button... we are having the following errors : -
<u><b>Message Type </b></u> <u><b>Message Class</b></u> <u><b>Message Class </b></u>
Errors in source system RSM 340
Queue 2LIS_03_BF is not available in the source system RSQU 9
Activation of data records from ODS object terminated RSM1 102
Answering Getz appreciated,
Thanks & Regardz,
<i><b>Aluri</b></i>Hi,
On BW go to SE16. Look at RSSDLINIT table. Match up the LOGSYS with your OLTPSOURCE (for the infopackage that is causing the problem).
Delete that line
Now you can open the infopackage. (be sure to delete the initialization) before you run the info pack again.)
Regards
Srini -
Error in source system while extracting the data from R/3!
Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
RaviHi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data. -
Error in source system in BI 7.0...
Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken -
"Error in source system" while creating source system
Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
BettinaHello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina -
Error in Source System While Uploading Data from ODS to Data Target
Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
ChakriThis generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG -
While loading data from r/3 to bw error 8 /error in source system is coming
while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .
Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check' -
Error in Source System, Time series does not exist
Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJHi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P -
Error while source system creation/Source system transport
Hi,
In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
Message no. RSAR502
Diagnosis
With Remote Function Call to system GWPCLNT900 error connection closed
(no data) ccurred.
Procedure
Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
KrishnaHi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier -
Time series does not exist, Error in Source System
Hi friends,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJHi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P -
DYNPRO_SEND_IN_BACKGROUND errors in source system
Hi All,
Yesterday night we kicked DELTA Process Chain.
The PC failed While loading the 0GL_ACCOUNT Attributes, and showing the message Errors in Source System.
and also Failed at Cost Element Attributes but both the error messages are same.
Checked the source system connections and repeated the process, but it was failed again. and tried to load manually and again failed.
When we check the DUMP in Source system (ECC) in ST22 showing the message as below:
"DYNPRO_SEND_IN_BACKGROUND" Current screen: "SAPLSTRD " 0351
Note: We ran FULL load day before yesterday and Ran INITIAL yesterday, We are running DELTA TODAY.
one thing is we just deleted the GL attirbutes Requests manually and loaded INIT , we are able to do INIT load perfectly. but while trying DELTA only this problem is causing.
Thanks in Advance,
TeenaHello ,
Sometimes the problem happens because the background users do not have the correct authorization. Please check the information in the SAP note 150315.
Kind Regards,
Des
Maybe you are looking for
-
Hi, I'm working with obiee 11.1.1.6.1 and I need to add images in a report column. I tried to follow the advices of Gerard for formulas as in http://gerardnico.com/wiki/dat/obiee/image but I don't see the images. I used the formula '<img src="dir/dir
-
'''bold text'''
-
How do I get my app store to work again?
Alright, I've been having this problem on and off for awhile now. But occasionally when I click on my applications folder in my dash, my app store won't be working, which after I see that, the one on my desk top will stop working as well. And when I
-
The look and feel values chosen for the JTable under windows do not feel right to me (albeit that I cannot find many examples of tables under windows). I am trying to provide some workarounds that follow what most people expect to happen but am a lit
-
MICR Font is not prviewing in PDF.
Hi Gurus, Thanks for your all support. I have a requirement for Check printing to Print the line in MICR font. I have installed the MICR font in my local machine. I install it in C:\Windows\Font It got install these TTF files MICRE13B P2 Tryout - MIC