Error in Source system-No entry for user in table RSADMIN Available

I have a user id with SAP_ALL
But when i try to create source system, i am getting the follwoing message
No entry for <user> in table RSADMIN Available

hi,
use the transaction rscusta
create user  and enter the user
BW User ALE          ALEREMOTE
or
rsa1 --> setting --> global setting ...
Regards
Ben

Similar Messages

  • Creating source system: No entry for BW_USER in table RSADMIN available

    Hi,
    When i try to create source system in RSA1, when I choose SAP system from Release 3.0E (Automatic creation), I get this message:
    No entry for BW_USER in table RSADMIN available.
    What do I have to do to create source system.
    RFC connection are already made.
    Best regards,
    Uros

    hi Uros,
    you need to maintain ale user,
    rsa1->settings->global settings->glob settings
    enter bw user ale. normally ALEREMOTE is used.
    oss note 410952
    Symptom
    You receive the error message when trying to connect a source system to the Admininistrator Workbench:
    "No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
    Additional key words
    RSAR059, APO, RSADMINA
    Cause and prerequisites
    In table RSADMINA, the BW user is not maintained for ALE.
    Solution
    Maintain the entry using the following path:
    Call Administrator workbench (transaction RSA1).
    From the 'Settings' menu, select Global Settings'.
    If an entry already exists in the field "BW user for ALE", delete this.
    Enter the correct names for the BW users in this field.
    Save the entry.
    You must restart the Administrator Workbench (RSA1) now.
    The source system can now be linked without errors.
    hope this helps.

  • "No entry for BW_USER in table RSADMIN available"

    Transaction "RSA1" -> "Source Systems" section. I right-click "BI" and choose "Create". I get the error:
    "No entry for BW_USER in table RSADMIN available"
    What does this mean and how do I resolve?
    I did some searching. Someone recommended this: "rsa1->settings->global settings->glob settings". But I can't find "glob settings" or anything similar.
    Also, I have one BI source system already defined, but I can't figure out a way to create a DataSource for it. I choose "Display DataSource tree", and when I right-click, I get "Replicate Tree Metadata" and "Replicate DataSources" but no option to create an application component or create a new Data Source. How do I do this?

    Worked for me as well..
    Thanks Srikanth
    Reg
    Mukesh

  • What is mean by "No entry for BW_USER in table RSADMIN availablea'

    Hi All,
    While creating Source system in my system i am getting this message "No entry for BW_USER in table RSADMIN available" , What is mean by this?
    Reply back me to [email protected]
    Regards,
    Kiran

    hi Kiran,
    means no aleremote user maintained for bw, you can maintain via rsa1->settings->global settings->glob settings enter bw user ale. normally ALEREMOTE is used.
    Creating source system: No entry for BW_USER in table RSADMIN available
    hope this helps.
    oss note 410952
    Symptom
    You receive the error message when trying to connect a source system to the Admininistrator Workbench:
    "No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
    Additional key words
    RSAR059, APO, RSADMINA
    Cause and prerequisites
    In table RSADMINA, the BW user is not maintained for ALE.
    Solution
    Maintain the entry using the following path:
    Call Administrator workbench (transaction RSA1).
    From the 'Settings' menu, select Global Settings'.
    If an entry already exists in the field "BW user for ALE", delete this.
    Enter the correct names for the BW users in this field.
    Save the entry.
    You must restart the Administrator Workbench (RSA1) now.
    The source system can now be linked without errors.

  • Keychain error -25299 occurred while creating a System Keychain entry for t

    Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
    I keep getting the error above every time I try to set up my time capsule
    Could use some help?
    Mahalo

    Same here.

  • Error deleting source system with error message: "incorrect input for....."

    Hi,
    I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
    "incorrect input for activating transported shadow IPacks"
    Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
    Please let me know what is the caused of the error and how to solve the problem.
    Thanks for your kind help.
    Regards,
    Mark

    Hi Mark,
    Which version of BW are you in?
    check this thread and also the note 709581
    Error Deleting Source system connection
    Thanks,
    Raj

  • System log problem ( Errors in source system)

    Hi,
       I Got the error message at psa level while extracting data from r/3 to bi is
    Errors in source system
    Message no. RSM340
    and i checked in sm21 , i found the system log for my user as
    Operating system call gethostbyname failed (error no. 11004)
    I checked all related forums but no use.
    can any one give the solution.
    thank you.

    hi,
       Basis team side they are saying that every thing is ok. today when i trigger the info package at background job , after extracting 37 lakh records , i got the same error that is
    under details tab
    Data Package 1 : arrived in BW ; Processing : Processing not yet finished, entry 70 still missing  ,
    this message for data package 2 also and
    Data Package 151 : arrived in BW ; Processing : Selected number does not agree with transferred n
    this message for data package 152, 153, 154,155.
    under status tab the error message is
         *Error during import of results for employee 00004000     *
         *Errors in source system ( Message no. RSM340)     *
    I find one thing that when i gave selection on employee number i got the data into psa with out any error but when i gave date as selection at infopackage level i got tha same above error.
    Edited by: Srikanth.T on Feb 28, 2012 12:55 PM

  • "Error in source system" while creating source system

    Hello,
    I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
    When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
    The error occurs after the information "Please log on as an administrator in the following screen".
    The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
    What else could be the problem?
    Greetings & Thanks
    Bettina

    Hello,
    now we know that
    1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
    2. the system has to be changeable (scc4 and se03)
    After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
    Thanks for the tip regarding the authorizations.
    Greetings
    Bettina

  • Error while source system creation/Source system transport

    Hi,
         In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
         Since we can’t create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
         I have two queries.
    1.  Is this way is correct for creating the Source System for BW Production system?
    2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
    Error in source system GWPCLNT900
         Message no. RSAR502
    Diagnosis
         With Remote Function Call to system GWPCLNT900 error connection closed
         (no data)  ccurred.
    Procedure
         Remove the cause of the error.
    When tried again I got the following error message
    Basic type ZSBB030 doesn’t exist. EA 447
    Result of the destination check: Timeout RSAR 375.
    Could anyone throw some light on these errors?
    Thanks in advance.
    Krishna

    Hi,
    you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
    In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
    The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
    Please look at best practice documents on a more step-by-step guide...
    Best regards,
    Christian Frier

  • Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
    You do not have permissions to access a database that contains data required for this form to function correctly.
    An entry has been added to the Windows event log of the server.
    Log ID:5566
    When I go to the log files on the SharePoint server. I see the following error.
    Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
    I am guessing this has something to do with the UDCX connection and the database.
    Can anyone help me get this fixed?

    Hi Jim,
    Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
    in the UDC file explicitly.
    Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
    http://support.microsoft.com/kb/981684
    Thanks
    Daniel Yang
    TechNet Community Support

  • Delta Loads failling after system copy with error in source system(RSM340)

    Hi Guru's
    We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
    But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
    Could anybody help  me out in this aspect.
    Thanks!!!
    Kuldeep

    Hi,
    Check whether the profiles that ran in background have the following authorizations.
      The RFC user on BW, receiving data from OLTP system, should have  S_BI-WHM_RFC and S_RS_ALL in the user profile.
    The RFC user on OLTP, receiving request from BW system, should have  S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
    Regards .

  • Error in source system of type BW

    I am getting the following error when I am right clicking on the BW source system and selecting 'Check'
    EDI: Partner Profile not available      No.332
    Entry in inbound table not found       No.414
    Entry in outbound table not found     No. 400

    The partner profile settings for your BW source system are not set up properly in WE20.
    Try this.  In RSA1, in Source Systems, right-click on your BW source system and select "Restore".  This should set up the partner profile.  You might also be asked to replicate the datasources.  This is okay.
    If not, you may have to adjust the partner profile settings manually in WE20.
    See these links:
    EDI partner profile not maintained.

  • Error in source system in BI 7.0...

    Hi,
         When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
    EDI-  partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
    THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
    PARNUM-PARTNER NUMBER
    PARTYP-PARTNER TYPE
    Please help me in solving this. Thank You.

    Hello,
    Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
    Hi,
    Did you do a system copy for BW ?
    Try a restore (rightclick on your source system) in most cases this will solve the problem.
    If not check the notes below:
    184322 Procedure after DB copy of BW source systems
    886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    325470 Activities after client copy in BW source systems
    325525 Copying and renaming systems in a BW environment
    184754 Procedure after BW database copy
    184447 Building a BW-system landscape
    184971 Notes on BW source system connections
    140276 Error in source system assignment
    524554 Storing destinations in the BW environment
    538052 Maintenance of Myself destination in BW
    Regards, Patrick Rieken

  • Error in Source System While Uploading Data from ODS to Data Target

    Hi All,
    Iam getting Following Error while Uploading data from ODS to Data Target
    a) Error in Source System.
    b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
    The time stamp in the source system is 21.06.2005 07:31:33.
    The time stamp in the BW system is 27.11.2004 17:41:45.
    Regards,
    Chakri

    This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
    1. Check for the coonect between the sourse & target systems
    2 . Replicate the data sourcses.
    3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
    Thanks ,
    PSG

  • Error in Source System, Time series does not exist

    Hi Guys,
    I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
    Error Message : Time series does not exist,
    Error in Source System
    I have pasted the ststus message below
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks,
    YJ

    Hi,
    You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
    Few notes are:
    528028,542946,367951,391403,362386.
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for