Error in source system of type BW

I am getting the following error when I am right clicking on the BW source system and selecting 'Check'
EDI: Partner Profile not available      No.332
Entry in inbound table not found       No.414
Entry in outbound table not found     No. 400

The partner profile settings for your BW source system are not set up properly in WE20.
Try this. In RSA1, in Source Systems, right-click on your BW source system and select "Restore". This should set up the partner profile. You might also be asked to replicate the datasources. This is okay.
If not, you may have to adjust the partner profile settings manually in WE20.
See these links:
EDI partner profile not maintained.

Similar Messages

ERROR with Source System in BI

Hi,
I replicated the datasources from DEV to BI. They replicated just fine. I can even see it in BI. I then tried to activate the datasource (i created the datasource from a view ) but it gave me a run time error :
ASSIGN_LENGTH_0 Short dump has not been completely restored..too big.
I then tried to go into the source system and tried to activate that and it said:
Source System DEV300 is inactive
BI Unknown in system
BI IDoc type ZSBC019 is not the same as source system IDoc type
The following errors occured in the source syaytem:
Entry in inbound table not found
Entry in outbound table not found
Result of the destination check: No authorization to logon as trusted system
What could have went wrong?
Thanks

Did you try activating the source system in RSA1 ..right click and choose active.
if this doesnt work then you might want to check the inbound and outbound entries in we20 transaction code for the source system. If you have authorization. Or you need to check with your BASIS to set that up for you.

Error in source system in BI 7.0...

Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.

Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

BI Idoc Type IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE

Hi all,
how can we solve the IDoc miss match in source system (ECC6).
Error :
BI Idoc Type ZSTC029 IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE ZSTC031
please provide me solutions..
Thanks in advance,
Venkatesh

Hi Venkatesh,
Check here.........
BW idoc type not same as source system idoc type
Thanks,
Vijay.

Errors in source system

Hi Friends,
 I got an failure with a data load... The data was loading into ODS from r/3. The data source name 2lis_03_bf... I got an error like this in status Tab -
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Extractor .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.
And when we click on the error message push button... we are having the following errors : -
Message Type Message Class Message Class 
Errors in source system RSM 340
Queue 2LIS_03_BF is not available in the source system RSQU 9
Activation of data records from ODS object terminated RSM1 102
Answering Getz appreciated,
Thanks & Regardz,
Aluri

Hi,
On BW go to SE16. Look at RSSDLINIT table. Match up the LOGSYS with your OLTPSOURCE (for the infopackage that is causing the problem).
Delete that line
Now you can open the infopackage. (be sure to delete the initialization) before you run the info pack again.)
Regards
Srini

Error connecting Source System

We are on BI 7.0, just did a system copy of BW production to make a sandbox. Similar activity was done for ECC sandbox. Wehn I do a check on sourcesystem in RSA1. I get below messages.
BI unknown in source system
BI IDoc type ZSBB008 is not the same as source system IDoc type
The following errors occurred in the source system:
Entry in inbound table not found
Entry in outbound table not found
Source system cannot use any of the proposed connection names
I tried to delete the source system, but it doesn't gets deleted and gives below message:
No connection between Warehouse BWXCLNT010 and source system ECXCLNT010
Then I try to recreate the parter functions in WE20 in ECC(source system). When I am making an entry for RSSEND. I am not able to enter the Basic IDoc Type as ZSBB008. It says "Basic IDoc type ZSBB008 not found". I see the table RSBASIDOC has an entry for the source system & BW for this idoc type as active.
Kindly help as to what is wrong?

Hi,
Below notes could help you to resolve ur prob..
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184971 Notes on BW source system connections
You can also search in SDN/service.sap ' How to doc... establishing connection betwn BI and ECC.
Thanks,

BI IDOC type ZSBS042 is not the same as source system idoc type ZSBM023.

Hi Evrybody,
I got an error when trying to initialize the delta load.
Error Message :
BI IDOC type ZSBS042 is not the same as source system idoc type ZSBM023.
Thanks for the promt responses
Regards,
Zakir SM

Hi ,
I checked the IDOC with status 51.. I have this message
" No status record was passed to ALE by the application ".
what to do now...
Rgds,
Zakir

BI Idoc type not same as the source system Idoc type

Hi Experts,
We have refreshed BI 7.0 from production to quality system and while restoring in source system in RSA1 we are getting error message " BI Idoc type ZSZD005 is not the same as source system Idoc type ZSAD008" with ID-RSAR371
Quick response would be really appreciated
Regards,
RaviChandra

Hope this will be helpful for you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04af5ab-5737-2b10-67aa-88e25e80b325

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

"Error in source system" while creating source system

Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
Bettina

Hello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

While loading data from r/3 to bw error 8 /error in source system is coming

while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .

Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check'

Error in Source System, Time series does not exist

Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

Urgent Help! Errors in source system(RSM 340)

Need urgent help. Issue in production.
I added fields to the COPA datasource, by changing the operating concern. I recreated the datasource with the same name replicated into BW & ran delta again. The whole procedure worked fine in Dev & Quality but in production it gives me the below error. I thought its a delta issue so I deleted the data & try reload but still same issue. Below is the error. I checked the connection with R3. its an ok. All other loads work fine. Before deleting delta, it gives below error & when you rerun, it finishes with zero records. I also tried activating update, transfer & ods & cube in BW. I also asked functional guy to check operating concern & its active. kindly help
Errors in source system RSM 340
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.

Hi PK,
caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
i think you get the error message as follows. file is in the client workstation as like.
better you contact basis people. they will resolve this.
hope this help you
Regards
Harikrishna N

Error in source system of type BW

Similar Messages

Maybe you are looking for