Error in Source System, Time series does not exist

Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Source system BID-010 does not exist

    Hi,
    I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
    "Source system BID-010 does not exist"
    Can anyone please help!!
    Thanks,
    Dipti

    Hi Siggi,
    Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
    I also received an error as " There is no DataSource with these attributes                                              
    Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
    I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
    Can you please help..
    Thanks
    Dipti

  • Time series does not exist, Error in Source System

    Hi friends,
    I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
    Error Message : Time series does not exist,
                             Error in Source System
    I have pasted the ststus message below
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks,
    YJ

    Hi,
    You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
    Few notes are:
    528028,542946,367951,391403,362386.
    With rgds,
    Anil Kumar Sharma .P

  • Endpoint Protection error: The source folder for content does not exist.

    I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
    I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
    I just recently started seeing that my Endpoint Deployment Package has Failed.  I click on "Content Status" and select the Endpoint package (which again shows Failed).  I click on "View Status" and I get this
    message in the "Error" tab:
    The source folder for content does not exist.
    The Asset Details point to the exact location  that does not exist:
    The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist. 
    I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
    shared and is populated with a lot of other folders. 
    Is this possibly just a bad update file?  Should I manually create that sub-folder that it says is missing?
    Any help would be great!  Thanks!

    Thanks for the quick reply, Torsten.  (I often forget which logs to check for certain things).
    There are six lines (3 errors -- in italics below) in the log around the same time frame.  They read:
    The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM  
     5920 (0x1720)
    STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to take snapshot of one or more contents in package PDC00063    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to process package PDC00063 after 33 retries, will retry 67 more times    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:47 AM    5920 (0x1720)

  • Source system BIDCLNT600 / ECCDEV210 does not exist

    Hi all,
    While transporting the BI dev transports to BI prod ,
    I am facing the subjected error saying "
    Source system ECCDEV210 does not exist
    Source system BIDCLNT600 does not exist
    Regards
    Venkat

    Hi,
    I maintained the settings in BI Prod like:
    Original Source System : ECCDEV210 (R/3 Dev)
    Target Source System :  ECCPRD400 (R/3 Prod)
    But I am facing the other problems like:
    1. Field ERDAT will not be delivered from DataSource 0WBS_ELEMT_ATTR in source system ECCPRD400  
    2. DataSource 0WBS_ELEMT_TEXT does not exist in source system ECCPRD400 of version A 
    3. Mapping between data source 0WBS_ELEMT_TEXT and source system ECCPRD400 is inconsistent 
    4. Reference to transfer structure 0BILBLK_DL_TEXT_BB not available. No activation possible. 
    5. Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    6. Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode) 
    Like these so many repetitions in each area.
    For the information:
    1. I opened the R/3 prod system , activate the data sources (standard using RSA5) and replicated into the BI prod system.
    So,whatever I activated in R/3 prod are available in BI prod after replication. After that I send the transport request. But I have not transported any request from R/3 Dev system to R/3 Prod system with the data sources.
    2. I created the transport request based on Info cubes. First, In data flow before option and next request with " In data flow after " option and collection mode is " automatically"
    Pl advice me.
    Regards
    Venkat

  • Source RSDS DS_CA_CLIFID DBW_150 does not exist

    Hello all,
    I have created a Datasource in BW through RSO2 and then I created a Transformation rule from this Datasource to an infoobject.
    When I transport this to QA, I get the error message "Source RSDS DS_CA_CLIFID DBW_150 does not exist".
    It seems to me that the logical system name conversion is not working, since that QA is QBW_250 and not DBW_150.
    The customizing for logical system name conversion is correct and it´s the first time I get this error, coincidently it´s the first Datasource I create using the new version (7.0).
    Did any of you have this problem?
    Thanks and regards,
    Cristina.

    I had exactly the same problem, at a client of mine, when transporting the master data layer (InfoObjects, Transformations, DataSources and InfoPackages) from a BW Development System (DEV) to a BW Quality Assurance System (QA).  We were on BW 7.01 Support Pack 6.  I kept on receiving error messages in the transport log for the transformation after-import method, referring to DataSources in the DEV system not existing in the QA system.  Here's one of them:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Source RSDS 0VERSION_TEXT DEVCLNTXXX does not exist
    After unsuccessfully trying many different things, such as ensuring the logical system name mapping was correct (they were from the start), the DataSources existed and were active in the QA system (which they were from the start) and different combinations and sequences of transports, I stumbled upon the following notes which solved the problem.
    - 1412414 (SP24) Content is not generated/transport errors; and
    - 1489612 Objects of the type DTRF deleted after method is executed (supplemental note to 1412414)
    Have a look at the commentary inside Note 1412414 and I think you'll find it matches your problem:
    Errors RSTRAN 514, RSTRAN 803, and RSTRAN 401 can occur during the transport of transformations since the source object of the type "DataSource" of a transformation is not found in the target system of the transport.
    Good luck!
    Cheers,
    Campbell

  • Cross system company code does not exist.

    Hello,
    I am trying to upload Cost center through IDOC menthod.
    Message type of IDOC is : COSMAS
    Basic Type                     : COSMAS01
    But i am getting a error as Cross system company code does not exist in ( Create IDOC Overview).
    Kinly help me in resolving this issue.
    Regards,
    Hemanth.
    Edited by: hemanth kumar on Feb 20, 2009 3:08 PM

    Hi Shweta
    Have you checked with the data i.e. company code .
    May the company code which you are passing is not there in ur receiver system.
    Just check it out.
    Regards
    -Mitesh

  • Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

    Hi,
        I am getting following error while transporting export DataSource to quality system.
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    No rule exists
    Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
    Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
    Transformation does not exist (see long text)
        Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
    Regards,
    Pranav.
    Edited by: P D on Sep 20, 2010 9:02 AM

    Hi
      might be your data source not collected into transport request.
    If you are moving data source from once system to other system, this may missed.
    RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
    When ever we are moving objects from one system to other follow below are order to avoid failures
    1).New Infoobjects.
    2). Data source/Infosource
    3). Info Providers ( Cube/DSo)
    4). Update rules/Transformation
    5).Impacted objects and other
    Mahesh.

  • Error IW351-------System: Status object does not exist

    Hello,
    I am getting bleow error while saving service order.
    System: Status object does not exist. Message Numner IW351
    Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
    USEREXIT_SAVE_DOCUMENT_PREPARE  in MV45afzz.
    When i Try to save the service order i get the error messages which is coming from my validation
    After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
    As soon as i click on that i get a STOP messgae.
    Which i as below.
    System: Status object does not exist
    If I comment all my code and write only error message then it comes.
    but it does't come for information and warning message.
    actually steps are
    1. go to IW51
    2. create notification then service order then sales order
    3. if product hierarchy is different for material then it should display error on saving
    4. it is giving error message(my error message)
    5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
    which turn me out of transaction.
    but if i click on advance shipment icon without pressing enter its working fine..
    my error message is a normal error message .
    message e038(zcrm)
    " service line must be same".
    pls suggest.
    Regards
    LOKESH

    Hi,
    After MESSAGE add STOP. :
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    STOP.
    or If ambiguity with usage of  STOP being obselete use EXIT after message.
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    EXIT.
    BR
    Dep

  • Error:  The local root folder, ZZZZZZ, does not exist.  Please...

    Dreamweaver newest - Cloud
    Windows 7 Prof 64b SP1
    Everyday now upon firing up Dreamweaver I am getting the same error. As long as I worked on this certain site last the day before, dreamweaver of course tries to load that site upon the next startup.
    The error:  The local root folder, ZZZZZZ, does not exist.  Please choose a new local root folder
    I have typed the path myself and browsed to it many times.  When I go into the Site manager/edit site to correct this, it already has the correct path listed there.  If I just leave what is there and hit save, it doesn't work.  Once re entering is done it allows me to work on the site again. Connecting to remote/upload files and everything works fine.  I can close DW and reopen and all will be fine, for a while.    If I close it and maybe two hours later come back to work on it, DW will report that same error again on startup.
    Other editors of the site with same cloud version of DW and same site settings are not having this error. We've combed for differences.
    I've deleted the site definition altogether and recreated it.  It does not stop the error.
    I found some old references to this issue in the old macromedia forums dealing with Mac and spaces or odd characters being an issue in the local folder path. I'm on windows, but the complaints sounded so similar I decided to try a test suggested there.  Their suggestion was to create a new blank html file, without saving, add some text, select the text, use the link icon in the properties manager to drag a link out to any file in the files panel.  Upon doing so, DW creates a full local path that you can see in your html since you haven't saved the file yet.  The suggestors of this test said you should see if your "mac" and DW was having trouble with spaces or odd characters in the path.   Well the following path shows a PIPE character being created in the path by DW on my test page. 
    file:///W|/private/09 Websites/zzzzzz/index.html
    Could this be showing there is some kind of issue that I need to correct?  Or is this typical?  See the pipe character being listed after the network drive letter of W
    Our local root folder path:
    W:\private\09 Websites\zzzzzz\
    Server Settings:
         Root Directory:
    public_html/zzzzzz.com/
         Web URL:
    HypertextTransferProtocolCOLON//worldwideweb.zzzzzz.commercial/
    Any help or suggestions would be appreciated.

    Sudarshan Thiagarajan wrote:
    remote
    /home/zzzzz/public_html/zzzzz.com
    Is this how your remote setting is defined? If it is, do you have a folder called zzzzz.com on your remote server trailing public_html? Ideally public_html is your website root - index.html resides within that, unless your configuration states otherwise.
    To come to your actual question of the local root folder, yes, your file manager wont show files if the connection fails. However, accessing it depends on the permissions you have on your network drive. Have you checked that?
    I'm not sure why our guy has another folder underneath public_html. My guess is he has some company related hosted test folders for various things under there.  I can see a couple other folders under public_html while checking with filezilla. I suppose he just directed our domain to our web folder under public_html. 
    Again, two others here are using these exact same settings with no root folder errors from DW. We've checked many times and all is the same for them.
      Here are some screen grabs of the settings if this makes it more clear.
    This last one showing the remote connection address under the files/assets panel is the one that looks strange to me.  It shows a home folder / then a folder with our site name / then public_html / then our sitename.com .    Seems convoluted to me.  But it works for everyone else so I'm not sure if this error I'm getting has anything to do with these settings or if there is just some old DW settings file hung up in my system that I need to find and delete or what.
    Thanks for any ideas.

  • Error TF10175 The FMS team project does not exist

    We are using TFS and Visual Studio 2013. TFS was working fine for me. However we have to do some Java development and also wanted that code in source control in the project.  I was the lucky one (or not) volunteered to head this up.  I installed
    Eclipse and the TFS plugin for Eclipse now I am unable to use Visual Studio 2013 and the Source Control explorer to open other .Net based pieces to the solution without getting the following error:
    Error
    TF10175: The FMS team project does not exist.
    This only happens for me and since I installed the Eclipse TFS Plugin.  I also get the error when I try to get the latest code.  Is there an issue in using the TFS plugin for Eclipse and Visual Studios?
    R. K. Walters

    Hi Walters,  
    Thanks for your post.
    As you’re using TFS Eclipse, I moved this post to TFS Eclipse and Cross Platform forum for the better response.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SQL Error: ORA-00942: table or view does not exist + CX_RS_SQL_ERROR

    HI ,
    we are facing below issue while activating info object xxxxxxxx
    " SQL Error: ORA-00942: table or view does not exist "  and   " CX_RS_SQL_ERROR  "
    can any one help us out to resolve this issue.
    Thanks,
    EDK......

    Hi,
    Check the corrections given in the note 990764:
    Reason and Prerequisites
    Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
    ORA-00942: table or view does not exist
    Fehler in CL_SQL_RESULT_SET  Include NEXT_PACKAGE
    RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
    Solution
    SAP NetWeaver 2004s BI
               Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
    In urgent cases you can implement the correction instructions.
    The correction instructions contain the tightened inspection for characteristics.
    Regards,
    Anil Kumar Sharma .P

  • Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist  is not trapped. Why?

    Why APEX 4.1 Error handling function does not trap  the error of missing table?
    Say, I create simple application with single IR report page and I also assign standard simple error handling function.
    Function works perfectly, except but this case:
    If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
    ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
    and error handling function is not invoked at all.
    Is this a feature or a bug?

    Hi,
    Check the corrections given in the note 990764:
    Reason and Prerequisites
    Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
    ORA-00942: table or view does not exist
    Fehler in CL_SQL_RESULT_SET  Include NEXT_PACKAGE
    RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
    Solution
    SAP NetWeaver 2004s BI
               Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
    In urgent cases you can implement the correction instructions.
    The correction instructions contain the tightened inspection for characteristics.
    Regards,
    Anil Kumar Sharma .P

  • Error: Tax cod OI country IN does not exist in procedure TAXINN

    Hi all,
    while posting invoice, i am facing an error
    "Tax code OI country IN does not exist in procedure TAXINN"
    I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
    I think i missed some thing in the configuration part. Please guide me.
    Thanks!
    Pavan

    Hi,
    1. If tax is deducable in nature means if you are using CIN then assigm Tax code
    SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
    here assign tax code with company code .
    2. If while doing miro you are getting Tax Code" VN" Instead of OI
    then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
    You can use data base tables also for your Tax code if you know tax conditions used there
    T Code : SE16
    Table : A363
    A358 Country/Plant/Ctrl code/Material
    A357 Country/Plant/Ctrl code
    A362 Country/NBM-NCM Code
    A971 Tax Code
    A359 Plant/Matl group
    Hope Help u !
    Regards,
    Pardeep Malik

  • Error in file receiver adapter (Directory does not exist / cannot be create

    I have a NFS reiceiver file NFS adapter with target directory:
    10.128.68.38\arbo2000\UploadPinfos\arbodev
    if I run this line in windows, windows access to this folder.
    Full Error log:
    Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
    Configured at 2006-04-06 18:08:26 CEST
    History:
    - 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
    Can somebody help me please??

    Hi Alvaro,
            If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
    Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
    To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
    Cheers
    JK

Maybe you are looking for