"Error in source system" while creating source system
Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
Bettina
Hello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina
Similar Messages
-
Error : Modification not possible- while creating source system in BI7
Hi BI Guru's,
We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
Is there any body put some light on this issue
thanks in advance,
Regards,
MohanMohan,
Check if your logical systems are in place in SCC4 and also in the transport connection.
Also check if you are connecting to the source system by IP Address or by logical name.
Accordingly you would have to maintain the source system connections.
Arun -
Error while creating SOURCE SYSTEM
Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
VineethHi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka -
Portal Runtime Error while creating new system in portal content
Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log fileHi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun -
RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6
Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rockhi,
check the log file and let me the the error.
manish -
Error while creating MDM system on Portal
Hi All,
I am trying to create MDM system in EP. MDM is 5.5 SP06. EP is 7.0 . We have upgraded the MDM sca files on Portal from SP05 to SP06.
While creating the system , after entering the server, we are getting the following error.
com.sap.mdm.internal.protocol.manual.ServerException: File failed a crc check
Please help
Regards
ShilpaHi Shilpa,
If this is your MDM build version 5.5.63.80 SP06. It means you are using MDM 5.5 SP06 Patch3 hotfix 80.
You need to find the Sca file of compatible with this version.
So they should be
- MDMJAVAAPI06_03.sca
- BPMDMAPPLN06_03.sca
- BPMDMTECHN06_03.sca
The hotfix number can slightly differ but the Support pack and patch number must match.
You need to follow this link:
http://service.sap.com/swdc
(download MDM support packages) Download>support packages and patches>entry by application
group>sap netweaver>sap mdm>sap mdm 5.5>Entry by component>Portal content
Then select which MDM portal content you want and check what is the version of those available sca files.
based on the availablity of the sca files you need to upgrade/downgrade or server.
As compatibility between the server version and sca files is a must for proper functioning.If its not possible to change your mdm server version then you can ask your Basis team to hunt the matching sca files for you.
Hope It Helped
Thanks & Regards
Simona Pinto -
Keychain error -25299 occurred while creating a System Keychain entry for t
Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
I keep getting the error above every time I try to set up my time capsule
Could use some help?
MahaloSame here.
-
CIM_ERR_ALREADY_EXISTS: Error while creating Business System
Hi,
I am getting following error while creating Business System in SLD, the Technical System is already created from RZ70 transaction in the IDES system
Error Creating business system: CIM_ERR_ALREADY_EXISTS: Instance already exists://inbbssun01/sld/active:SAP_LogicalALESystem.CreattionClassName="SAP_LogicalALESystem", Name = "LSIDES800.SystemName.800.SystemName.IDS.SystemNumber.0020224902.SystemHome.idesecc"
Thanks,
RPHi,
This error means that a business system with this name(or associated with this technical system) is already there in SLD.
You need to check that before you try creating it (might be someone else have created it before)
Updated
If you have created and deleted a business system and then trying to recreate one then you need to delete all the instance of it from Content Management (in SLD)
Regards
Suraj
Edited by: S.R.Suraj on Nov 9, 2009 12:34 AM -
"An error occurred while creating the system proxy" after upgrade to 11.2
Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ? -
Problem While Creating New system
Hi.
i have downloaded sap netweaver 7.01(trail version) from SCN.
installation was successful.
Frontend GUI was installed in System Drive(C Drive)
and Netweaver was installed in D Drive
i have started the application server.
in the logon pad what are the details i need to enter while creating new systems in logon pad.
i followed help and typed the same info as in the f1 help.
in connection tab:
connection type: Custom Application Server
System connection parameters:
Description: SAP
Application Server : u9cmain (as in f1 help)
System Number: 00(as in f1 help)
System ID: u9c(as in f1 help)
SAProuter Sring: (empty)(as in f1 help)
after giving this details. when i logged in it shows this "hostname u9cmain unknown, check your application server name"
how can i rectify this error. where can i check my application server name...
help me out plz.>i followed help and typed the same info as in the f1 help.
You can't use the same host name and SIDs as per help under F1
Configure as below:
Description: SAP (You can use anything)
Application Server : (your computer name or IP address)
System Number: (has to be 2 digit, and which numbers you have assiged while installation)
System ID: (your instance name)
SAProuter Sring: (not required) -
Integration Server not found while creating Business system
Hi all,
I m facing following problems in XI.
While creating Business system, "integration server" name is not displayed in the drop down box. and
I m getting the error "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
thanks and regards
vijayHi Vijay
Please check if you have assigned the correct Integration server to the business system in SLD.
and for the the software component error check if the user has required access (roles assigned) for importing the software component.
Thanks
-Mitesh -
While creating Billing, system is very slow..performance issue
Hi,
While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
This is showing performance issue.
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 12, 2011 10:59 AMhi,
Chk the links
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
Re: How to create Secondary Index?
How may secondary indices I can create on the ODS?
Deletion of ODS index
Ramesh -
GRC 10 Upgrade: Unable to find a system while creating a request in AC
Hi All,
I am unable to find a system while creating a new request in Access Management. I have created a connector to the backend system and I tested that by logging into the system remotely. However, the same system is not available for selection for which the request needs to be created.
Please suggest.
Regards,
FaisalHi Faisal,
Please re-visit the following config:
SPRO>GRC>AC-->Maintain Connector Settings
SPRO>GRC>AC-->Maintain Mapping for Actions and Connector Groups
SPRO>GRC>AC-->Maintain Plugin Settings (Make sure you have not checked the checkbox)
Still not solved - please follow this document and make sure you have completed all the steps:
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/5067e447-5c64-2e10-7d9c-8f7e5953aadb
Regards,
Ajesh. -
Error in message monitoring while creating new record in R/3
Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
DevendraThe CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE. -
Error msg RSAR502,while creating source system?
Hello Gurus,
when i am creating source system i got error msg called RSAR502,can any one solve this issue..
Thanks in AdvanceHi,
Check the OSS note : 184586,493422.
Take the help of ur Basis support.
Hope it helps-
MM
Maybe you are looking for
-
Transformation between DS and DSO missing Non-cumulative KYF
Hi SDN, I installed the business content for CML, and am working with 0CML_DELTA_CAP datasource. I would like to create a transformation between this datasource and DSO 0CML_O03. By default, when you install the CML business content, the datasources
-
How to transfer data in A tableview control in transaction ME21n
Dear friends, I m new in the field of SAP ABAP. And right now i m trying to transfer the data in a tableview control in transaction ME21n. I've recorded the sequence of mandatory fields in transaction ME21n but, when i try to transfer the data using
-
I'm trying to export (aka "Share") a FCPX video clip ~2.5 minutes long to a web page for playback by either a Mac or a PC. What I would really like is a small *.mp4 video file. Note: The desired output only needs to be something similar to a YouTube
-
How to do inbound and outbound interfacing using UTL_FILE?
dear members, How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file. regards sandeep
-
Emailing Pages Exported from a PDF
Many of our users have large PDFs and would like to extract specific pages and email the extracted pages. They select File, Attach to Email. Unfortunately, the Attach button is dimmed on the task pane. However, if they save the extracted pages as a