Error in spool call C call : spoll overflow...
Hi gurus,
when iam trying to generate a spool request while creating process order it's giving an error ....
Error: Error in spool call C call : spoll overflow...
Thanks in advance...
regards
Khan......
hi,
Check out the below related thread
Spool problems!
Regards,
Santosh
Similar Messages
-
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
Why do I get an invalid handle error when debugging, on a call to ncReset?
I am working with the example program obj2obj.c
I have a PCI-CAN/2 card installed.
I must call ncReset for *both* ports (CAN0 and CAN1), prior to any other commands or I will get a driver error (NC_ERR_DRIVER, Bxxx0002).
This happens even if the program terminates properly, closing all handles, and I then remove the ncReset commands.
Fine, I can live with the ncResets.
However, if I then try and debug the program using Microsoft Visual C++, it immediately chokes on the second call to ncReset( "CAN1", 0 ) and complains about an invalid handle.
If I add a status check to both of the ncResets and run the program from the DOS command line, I don't get any errors printed out
so the calls are working fine just running the program.
The driver updates listed do not appear to address this problem (1.4.1 uses LabView which I do not have and 1.4.2 is for Windows 2000)
Why are the ncResets required in the first place?
And why can't I single step through the second call to ncReset?
Thanks in advance for your help.
System details:
PC running Windows NT 4.00.1381
PCI-CAN/2 w/driver 1.4
Microsoft Visual C++ 6.0 Professionalbsat, thank you for helping out!
I had tried using only one ncReset previously and was experiencing driver errors. I removed the second ncReset as you suggested and now it seems to work with only one. I cannot get it to fail like it was doing.
However, at least one ncReset must be used or I get the following error:
ERROR ncConfig CAN1: Driver error (qual=000b000)
Press any key to continue
I get this error even when the program terminates normally. For example:
1) Build obj2obj with the ncReset command.
2) Execute and allow to terminate normally.
3) Edit obj2obj and remove ncReset command.
4) Execute and the error message is displayed.
Amazingly, I was also able to single step through most of the program this morning. I got the first three messages (of 10 total) before ge
tting the error:
Microsoft Visual C++
First-chance exception in cctool.exe (NTDLL.DLL): 0xC0000008: Invalid Handle
It seems to be more random than first appeared and perhaps more related to MSVC than to the NI-CAN card. Any insight?
Also, having to include an ncReset is undesireable since I'd like to develop a CAN driver that could be called from multiple threads. I'd be very interested in your opinion on why I'm having trouble getting it to work without one.
Thanks again for your help, it is greatly appreciated! -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful. -
Error in application accurred please call support quoting error code 2907
error in application accurred please call support quoting error code 2907
I suggest you call support and quote error code 2907.
-
STMS error - Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Dear Experts,
We are facing issue in releasing or importing TRs.
1.When releasing TRs in DEV server, it is showing error message "Could not start control program TP" on status bar. But repeating the same process went successful.
2. While Importing TRs into QAS, at the time of refreshing queue/adjusting import queue, it pops-up error " timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' .But after repeating same process, TRs were impoted successfully.
We had performed the following in DEV & QAs:
1. Upgraded kernel to patch level 137.
2. After that replaced TP & R3trans with latest patch levels 169.
3. Re-configured STMS
4. Restarted Server.
Also checked,
(i). Report RSTPTEST in se38- sometimes successful; sometimes error :"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (ii). RFC "CALLTP_WindowsNT" in sm59 Connection is OK.
Please help.
Thank you in advance.
RegardsHi,
Check below link if it helps:
Re: STMS
Pls also check below things :
- check that the "Gateway Options" are maintained in SM59 and the sapdp00/sapgw00 are maintained in the etc/services files. SAP Note 52959
- Please check SAP Note 773830 if you are on a cluster environment.
For the error regarding timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' please check SAP Notes 581509, 566566.
Thanks,
Rupali -
RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#
Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno -
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshhi,
i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic. Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
when i checked in frame, error log: system says:
Error: ODBO error
Details: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
ours is bi7 system. issue not resolved ..pls suggest me steps to resolve this.
thanks,. -
Ecatt script fails due "Error in OLE API method Call" error
Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN. -
*ERROR IN OLE CALL - METHOD CALL ERROR...*
HI ..
When trying to Upload a file using BDC with Vista OS, we are getting the following error..
ERROR IN OLE CALL - METHOD CALL ERROR...
There is no problem with BDC as its working fine with XP & other OS.
Pls help!!Seems that you are working with microsoft files.
Maybe you are using deprecated functions like WS_EXCEL -
I can't search a song or an artist without getting an error R6025 - pure virtual function call. Then itunes stops working. How do I fix it? PLEASE HELP
I have had numerous issues with Itunes 64 bit 11.1.38 (and other previous versions) locking up and crashing upon start with "Itunes has stopped working" or "R6027 pure virtual function call". I have researched the answers around the forums as well as having tried some extensive and repetitious troubleshooting myself and thought I'd list them here... in order of troubleshooting...
1. Install all Windows updates and reboot. This seems to clear issues from time-to-time... I suspect Itunes expects the latest-and-greatest as far as Windows is concerned.. see if this clears your issue.
2. Uninstall all Itunes and Apple products & reboot, remove their directories, remove lingering Itunes registry entries, reboot again, reinstall using "RUN AS ADMINISTRATOR" to install the Itunes executable. See if this allows Itunes to stabilize. Pelase be sure to use the following guide from Apple as far as removing the apps and directories are concerned...
http://support.apple.com/kb/ht1923
3. Remove the contents of the "iphone photo cache" (or other related product photo cache) directory.
4. Try editing the shortcut properties and configure the shortcut (for all users) to run as Administrator.
5. Try editing the shortcut and configure it to run in Compatibility Mode for Windows 7 (for all users).
6. a.Try using MSCONFIG to locate a potential conflicting application or service using the following...
http://support.apple.com/kb/ht2292
or
6. b. Remove the last recent software application(s) you may have installed... in my case removing GREENSHOT http://getgreenshot.org/ stopped my Itunes from crashing on startup and it stabilized after
driving my nuts for weeks.
Message was edited by: DaCheeze -
Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik -
SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions? -
Error: Fatal error in function BldAlter on call to function GetOldRecDefn.
At step "Generating the Updated PeopleTools Script" to generate "PPLTLS84CURTables.sql", more than 2270 errors occured:
Example Error 1:
System Error : File: E:\pt85403d-retail\peopletools\src\psbld\bldalter.cppSQL error. Stmt #: 4550 Error Position: 0 Return: 601 - [Microsoft][SQL Server Native Client 11.0][SQL Server]Invalid object name 'SYSCOLUMNS'.
Failed SQL stmt: select c.name,c.colid,t.name,c.length,c.prec,c.scale,c.isnullable from SYSCOLUMNS c, SYSOBJECTS o, SYSTYPES t where c.id = o.id and c.usertype = t.usertype and o.type = 'U' and o.name = :1 order by c.colid
After changing table/view names from upper case to lower case. the query works.
Example Error 2:
Error: Fatal error in function BldAlter on call to function GetOldRecDefn. Return code = 1. (76,6)
Error: MENU_LANG_TMP - SQL Error. Error Position: 0 Return: 601 - [Microsoft][SQL Server Native Client 11.0][SQL Server]Invalid object name 'SYSOBJECTS'.
SELECT NAME FROM SYSOBJECTS WHERE TYPE = 'TR' AND NAME = :1
Error: PSMSFTMPCOM - SQL Error. Error Position: 0 Return: 601 - [Microsoft][SQL Server Native Client 11.0][SQL Server]Invalid object name 'SYSOBJECTS'.
SQL Build process ended on 11/7/2014 at 10:39:42 AM.
2698 records processed, 2274 errors, 0 warnings.
SQL Build script for all processes written to file E:/temp/CAOutput/softwareupdatePeopleTools_Only_Upgrade{HR90UPG}/PPLTLS84CURTables.sql.
SQL Build log file written to E:/temp/CAOutput/softwareupdatePeopleTools_Only_Upgrade{HR90UPG}/BuildPPLTLS84CURTables.log.
Thanks for any suggestions!
DongmeiPassed the above error by changing object owner from ACCESSID to dbo. Now on the same task "Generating the Updated PeopleTools Scripts", there are 516 errors, sample error messages:
Error: PS_APP_DES_OBJ_CST - Alter failed due to an unknown column type (NVARCHAR) found for field PSOWNER. (76,22)
Error: Fatal error in function BldAlter on call to function GetOldRecDefn. Return code = 1. (76,6)
Error: PS_APP_DES_OBJ_LNG - Alter failed due to an unknown column type (NVARCHAR) found for field PSOWNER. (76,22)
Error: Fatal error in function BldAlter on call to function GetOldRecDefn. Return code = 1. (76,6)
Error: PS_APP_DES_OBJECTS - Alter failed due to an unknown column type (NVARCHAR) found for field PSOWNER. (76,22)
Error: Fatal error in function BldAlter on call to function GetOldRecDefn. Return code = 1. (76,6)
Warning: MCF_IM_DEMO_REC.MCF_IMUSERID - Default record.field MCF_IM_DEMO_REC.USER_OPRID has no rows, field type default used. (76,66)
Error: PS_PRCSDEFN - Alter failed due to an unknown column type (NVARCHAR) found for field PRCSTYPE. (76,22)
Appreciate any help!!
Dongmei -
See Burger Error in BICMODULE-module:Adapter call failed. Reason: null
Hello All,
Scenario IDOC to File using Seeburger BIC problems in in my receiver adapter when converting from XML to EDI.
Error is:
"Message processing failed. Cause: Error in BICMODULE-module:Adapter call failed. Reason: null"
The Seeburger modules used in my receiver adapter:
1 localejbs/CallBicXIRaBean Local Enterprise Bean BIC_MT
2 localejbs/CallBicXIRaBean Local Enterprise Bean BIC
3 localejbs/Seeburger/FileStore Local Enterprise Bean ARCHIVE_EDI
4 CallSapAdapter Local Enterprise Bean 0
with following module configurations
BIC destDelimiter @http://seeburger.com/xi/bic/destDelimiter
BIC destSourceMsg source
BIC destTargetMsg MainDocument
BIC dynamicConfiguration true
BIC newLine true
BIC useAttribIfSet true
BIC_MT PartnerLookup on
BIC_MT destSourceMsg MainDocument
BIC_MT destTargetMsg MainDocument1
BIC_MT mappingName XML_Generic_ANSI_X12_to_DB_MT_OUT
BIC_MT saveSourceMsg source
Can some one tell me why there is an Error and what additional module configurations it requires .
Thank you,Hi,
If possible go to mapping in BIC designer Tool and execute the same by passing your payload there...
if you encounter any errors then there might be a problem with mapping developed...or can be payload..
Also check the parameter used for destSourceMsg source ...is that the source message which contains the payload ?
HTH
Rajesh
Maybe you are looking for
-
In logic pro 7 how do I stop low volume high pitched squeal
Im using logic pro 7 with moto hd896 firewire. music will play thru itunes but won't thru logic.a message error while trying to sync audio and midi.
-
how to edit text from pdf file?
-
I was just trying to fix my wobbly screen and after finishing and connecting the screen to its port once again the screen didn't work but the processor is running normally so i just want to know what is the problem with my mid 2012 macbook pro?
-
I had my iphone 4 stolen and have been lent an iphone 3G, I have tried to restore the phone but its coming up with error 1015 and wont restore. I have the current Itunes software on my computer and there are no further updates to be done. Please hel
-
January Upgrade backup question
Hi, I have bought the January Upgrade and want to do a backup. I have located the file "iPod Touch App Pack 4A93.ipa" in the Mobile Applications folder (Win XP), but ONLY has a size of 9,49KB. Can someone confirm this? (It seems to be too small) Than