Error in stock posting : 005/2007 period not close in GL 799999 for type S

Dear All,
While posting stock through MB1C following error is shown. Though in T-Code MMRV is shows the period is closing. And also we tryed OBBP and created variant for our company code for all the line copying from 1000.
Please help in this regards,
Thanks in Advance.
CG Balaji

Hi,
This is an FI error, but you can go to OB52 and then in the second colum of the period change it to 2007 for type S.
Thanks
Priyanka M.

Similar Messages

Error: No depreciation posting required in period 009 (current period)

Hi,
I am getting error " No depreciation posting required in period 009" and 009 is my current period.
The description of the error says " Do depreciation is posted, since according to the posting cycle no postings are required in this period". In fact this is the first time i am running depreciation. I want to post the depreciation for 1st period. More over i could not able to see the planned values in asset explorer also.
Whenever i am entering this asset in the asset explorer it is giving the above error. But while i run the depreciation its not giving any error. When i check in spool to view the depreciation, its giving msg as "List contains no data" check error log.
Could anyone help me in resolving this error. what could be the reason for this error.
Thanks
Sabera

Hi,
I checked in TABA table, its showing that till 9 the period depreciation has been posted. But i have not posted the depreciation. If it is posted, then it has to show in the planned values as posted, but its showing as "No depreciation" and its not even showing the depreciation for other periods. Could you able to clear this query? I wonder why it is giving this kind of error.
Regards
Sabera

Error while Stock Posting

Hi All
While posting the stock in the plant, I am getting the Error message that " Period 004/2007 is not open for account type S and G/L 399999.
In the diagnosis message is coming that Period 044 of the fiscal 2007 does not exist in table T 001 B either in period 1 or in period 2 of the table entry with the record type " 0", the selected company code, the account type S and the G/L account 399999. The period is therefore not open.
I have already closed the Fiscal period till 004 2007.
Could anyone help on this.
Regards
Vipin

Hi Steve,
Since I am doing this for my practice purpose so I am seeking help from the experts here.
I have gone to the T.Code screen OB52, there we have Account type +,A,D,K, S with each having their own period ranges. I had done the changes in the S type of the account to the correct period and my problem is still there. the changes i did are mentioned below. My question is is it required to change the posting period for rest of the account types as well.
And in the column To Period Indicates "16". Does this 16 indicates the special period for postng i.e 12 + 4 or what?. I am just writing the entries in the table for the reference,
Vart   Account Type    "From Account" "To Account"    "From Per1"   "Year"     "To Period" "Year"   "From Per 2"    "Year"    "To Period"     "Year"    "AUGR."
0001               S            -
                      ZZZZ                  1            2001     12            2004      13   2001        16    2007
And whats the meaning of period 1 and period 2..
Pls provide the answers to these questions. Thank you

ERROR IN STOCK POSTING

while doing stock posting I am getting the bellow error T.code:MB1C
(Period 004/2014 is not open for account type S and G/L 799999)
Discussion locked.
Reason:
1. Basic question. Please put some effort in search & trail, before you post your query as discussion and explain your effort & understanding on that. Don't treat SCN as training center or help center.
2. Don't post all CAP in subject title
Please review SCN Rule of Engagement(RoE) and adhere them in your future post/conduct in SCN.
Message was edited by: Jyoti Prakash

MATERIAL 419 DOES NOT EXIST IN WAREHOUSE AP " this error is generated when you make a transfer posting from material to material in inventory management and simultaneously change the plant.
Solution: Maintain the Material master record of the material in the current plant only. Please also check the warehouse assigned to the plant and whether it has multiple assignments.
award points if helpful

AFS-QM Error in stock posting performed by taking Usage decision

Hi all,
during stock posting with 105 mov type performed by taking Usage Decision (QA11), I faced with a strange system behavior, described beneath.
Previuos steps:
Purchase order creation
Partial Good receipt performed by MIGO, mov type 103 (Blocked stock from PO)
Automatic Creation of Inspection Lot
Error encountered:
If I take usage decision (QA11) for the inspection lot created, putting the stock checked in Unrestricted Use (correspondant mov type = 105), in the following good receipt (related to the same purchase order), the incoming stock available is less of the real quantity, previously accepted..
After some checks we understood that with 105 mov type the system doubles the real quantity previoulsy accepted, acting in the following manner:
Initial PO: 100 PZ
1° Good receipt: 30 PZ
(automatic creation of inspection lot)
If we take a usage decision, posting stock to unrestricted use (mov type 105), in the 2° Good receipt, the quantity available from the same PO is not 70 PZ (100 - 30), but only 40 PZ ! ! (100 - (30 * 2)) = 40
Please note that it does not occur if we post stock (always 105 mov type) with a MIGO transaction, so we are forced to think that the problem is strictly related to AFS-QM inventory posting, and not to 105 mov type or inbounding process.
Thanks for your collaboration,
Regards,
Ale

I'm not familiar with the specific apparel and footwear solution but with regards to QM, if you are using the standard SAP delivered stock postings, it should use 105 to accept the material to unrestricted for the GR blocked.
I would first use MB51 for the material and batch and review all the material movement documents. Look at the trail of movements and try to see where the changes happen.
In your example, what did the unrestricted inventory and GR blocked inventory show as stock levels?
I'd also check OSS for issues related to AFS/QM. This is not new functionality in SAP so I would be surprised if this was an actual bug or problem in the system that hasn't been seen before.
FF

Error in stock posting in UD

hiii,
Error in Record Usage Decision (inspection lot stock tab)showing
"stock posting for inspection lot not possible"
lot is in released status
thanks
Edited by: aks on Jan 2, 2009 1:36 AM

For you to be able to post the stock the status of the lot should be SPRQ ( Quantity posting required ), only then would you be able to post the lot to URS and the lot status would change to SPCO ( Stock posting completed ).
For a complete sequence of lot status refer below:
UD Usage decision has been made
PASG Plan/specification assigned
CCTD Insp. characteristics created
CALC Sample calculated
RREC Results confirmed
ICST Short-term insp. completed
ICCO Inspection close completed
SPRQ Quantity posting required
SPCO Stock posting completed
STUP Statistics updated

Error while stock posting through template

Hi
im using stock taking tamplate for posting stock.after importing dtw shows no error, but when i observe the stock then the stock is not inserted.Whats the reason?how to solve it?
Thanks

Hi Krishna,
Actually when you import the data thru the oStock taking, then the data features in the
Inventory> Inventory Transactions> Initial Quantities......
in the Inventory Tracking tab page wih the counted check box ticked.
Then you update that and then open the same thru the stock posting tab and post by clicking on reconcile.
Now as a prior activity you should have the price list imported in the system. Before you update the counted quantities in inventory tracking, go to the initial quantities tab page and select the price list. The system will then take this price as the item cost to post in the inventory.
As a an activity to proceed, generally I would suggest that you take the item cost from the client, make a price list name "Item cost" and then import the price values for all the items.
Then you start the quantity import. So this price list is only for the stock posting purpose.
so to put in in a step wise schedule
1. Import price list and price values
2. go to Inventory> Inventory Transactions> Initial Quantities......
3. Initial quantities tab> and select the required price list for inventory posting
4. Import thru DTW (oStocktaking)
5. go to Inventory> Inventory Transactions> Initial Quantities......
inventory tracking tab> update
6. Inventory> Inventory Transactions> Initial Quantities......
stock posting tab> Reconcile
Then there will be a posting in the inventory gain which is an ofset entry for the import of opening balance. The same way you create an offset account during the update of BP opening balance. You may change the name to Opening balance offset and map that account during the time you reconcile the stock posting.
I hope this answers your query.
Regards,
Raj.

MIRO Posting in a period not yet open

Hi Friends,
We experienced an unusual behavior of the system when posting MIRO. Now we have not opened the current period in MM to facilitate pending transactions of previous fiscal year . Hence the period 12/2009 & 11/2009 (ie February & March 2010) is open . But it is seen that one MIRO against a PO could be posted giving posting date as 7.4.2010 & Document date as 31.3.2010.How it is possible when no other MM transactions are not allowed . Even we tried to do MIRO for another PO but it is not allowing .How it allowed to post the invoice in a posting date which is not yet open .This is to indicate here that our FI period of the current month is open .
Please give your views on this .
Dhruba

In OMSY the entry 2009 period 12 has not changed as we have not opened the new period of 2010.
Is there any conclusions on it or do any one guess what is the reason for such behaviour.
Dhruba

Error in stock posting and valuation

Hi
While taking stock in initial qty tab of inventory transaction im considering two ledgers one at the top im taking one opening account(open inventory account)and one is in front of item is ledger belonging group of that item (inventory account), avg value of item.there are no of items with different inventory accounts.on adding what the system does is
1.just debiting and crediting the inventory account.ie the inventory account is balanced(shows nill).
2.shows the qty stored in the (-ve ) sign in stock posting tab, which on reconsilling crediting the inventory account and debiting stock diffrence losses account.
the thing i want is that my inventory account should be debit and opening balance should be credit.
how should i do this?i have no clue.please solve it.
Thanks in advance

Hi,
The system will pick the inventory account from the item master data which you have assigned. Example - if you have set your item GL account on Item Group then system will hit the Inventory Account from the respective Item group. This is irrespective of the valuation method.
Hope this will help you.
Regards,
Abhishek
Edited by: Abhishek A on Dec 23, 2008 11:53 AM

Depot Stock posting at golive period

Hi,
Can anybody give me advise on depot opening stock posting procedure before go live of project.
regards

Hi bvdv,
Here if you need to capture excise invoice(reciept) using the t-code J1IG to update RG23D register from MM side. And SD end issues will be updated in RG23D register using the t code - J1IJ.
With the help of abap consultant look for BDC programing to upload RG23D register for receipts, but to update RG23D register for issues you need to manually refer respective bill of entries for each issues.
Thanks,
Swamy H P

HT201413 This error message will pop up "You do not have enough access privileges for this operation" when I'm trying to download updates.

I have had itunes on my computer for a while now and was working beautifully. I had a new printer installed by a tech guy with had to do something to windows 7 to get it to print correctly. Now itunes is acting up. When I try to download updates or sync with my iPad I get an error message saying "You do not have enough access privileges for this operation". Can anyone help?

I'm assuming you are synching to a Mac via iTunes? If so, you need to fix and reset your disk permissions using the Disk Utility app on the Mac.

An XJC compilation error - Could not load class (..) for type cvsversion

I've got a strange compilation error using NetBeans 4.0 (I'd guess the version does not matter here) and Ant 1.6.2. When the following task is executed,
<target name="compile_ofx_schema">
<antcall target="clean-ofx"/>
<delete dir="${ofx-jaxb-src.dir}"/>
<mkdir dir="${ofx-jaxb-src.dir}" />
<xjc schema="${schema.dir}/ofx102.xsd" package="com.xxx.ofx102" target="${ofx-jaxb-src.dir}">
<arg value="-nv" />
<arg value="-extension" />
</xjc>
</target>
I get the error from NetBeans console,
Class org.xml.sax.SAXException loaded from parent loader (parentFirst)
Class java.io.IOException loaded from parent loader (parentFirst)
D:\appserver\build.xml:797: unable to parse the schema. Error messages should have been provided
at com.sun.tools.xjc.XJCTask._doXJC(XJCTask.java:334)
at com.sun.tools.xjc.XJCTask.doXJC(XJCTask.java:283)
at com.sun.tools.xjc.XJCTask.execute(XJCTask.java:227)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:217)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:236)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
BUILD FAILED (total time: 4 seconds)
Could not load class (org.apache.tools.ant.tasksdefs.cvslib.CvsVersion) for type cvsversion
Could not load class (org.apache.tools.ant.tasksdefs.cvslib.CvsVersion) for type cvsversion
And when I run the Ant task from the command line, I don't get the error at all.
Any help is greatly appreciated.

That was a great finding from you. Thank you.
I followed your alternative approach and updated the ant.jar file. The "Could not load class..." error went away but the stack trace still remains. Now I am clueless again since I have ant on the debug mode and can't find any more useful info.
Class com.sun.tools.xjc.reader.internalizer.LocatorTable loaded from ant loader (parentFirst)
Class java.util.HashSet loaded from parent loader (parentFirst)
Class javax.xml.parsers.DocumentBuilderFactory loaded from parent loader (parentFirst)
Couldn't load Resource org/netbeans/core/xml/DOMFactoryImpl.class
Couldn't load ResourceStream for META-INF/services/javax.xml.parsers.DocumentBuilderFactory
Class org.apache.crimson.jaxp.DocumentBuilderFactoryImpl loaded from parent loader (parentFirst)
Class javax.xml.parsers.SAXParserFactory loaded from parent loader (parentFirst)
Couldn't load Resource org/netbeans/core/xml/SAXFactoryImpl.class
Couldn't load ResourceStream for META-INF/services/javax.xml.parsers.SAXParserFactory
Class org.apache.crimson.jaxp.SAXParserFactoryImpl loaded from parent loader (parentFirst)
Class javax.xml.parsers.DocumentBuilder loaded from parent loader (parentFirst)
Class java.util.Map loaded from parent loader (parentFirst)
Class javax.xml.parsers.SAXParser loaded from parent loader (parentFirst)
Finding class com.sun.tools.xjc.reader.xmlschema.parser.XMLSchemaInternalizationLogic$ReferenceFinder
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/xmlschema/parser/XMLSchemaInternalizationLogic$ReferenceFinder.class
Finding class com.sun.tools.xjc.reader.internalizer.AbstractReferenceFinderImpl
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/AbstractReferenceFinderImpl.class
Class org.xml.sax.helpers.XMLFilterImpl loaded from parent loader (parentFirst)
Class com.sun.tools.xjc.reader.internalizer.AbstractReferenceFinderImpl loaded from ant loader (parentFirst)
Class com.sun.tools.xjc.reader.xmlschema.parser.XMLSchemaInternalizationLogic$ReferenceFinder loaded from ant loader (parentFirst)
Class org.xml.sax.XMLFilter loaded from parent loader (parentFirst)
Finding class com.sun.tools.xjc.reader.internalizer.VersionChecker
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/VersionChecker.class
Class com.sun.tools.xjc.reader.internalizer.VersionChecker loaded from ant loader (parentFirst)
Finding class com.sun.tools.xjc.reader.internalizer.DOMBuilder
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-xjc.jar com/sun/tools/xjc/reader/internalizer/DOMBuilder.class
Finding class com.sun.xml.bind.marshaller.SAX2DOMEx
Loaded from D:\bbw\build\Common_3.6\Packaged\appserver\lib\jaxb\jaxb-impl.jar com/sun/xml/bind/marshaller/SAX2DOMEx.class
Class org.xml.sax.ContentHandler loaded from parent loader (parentFirst)
Class com.sun.xml.bind.marshaller.SAX2DOMEx loaded from ant loader (parentFirst)
Class com.sun.tools.xjc.reader.internalizer.DOMBuilder loaded from ant loader (parentFirst)
Class java.util.Stack loaded from parent loader (parentFirst)
Class org.w3c.dom.Document loaded from parent loader (parentFirst)
Class org.xml.sax.XMLReader loaded from parent loader (parentFirst)
Class org.w3c.dom.Node loaded from parent loader (parentFirst)
Class org.w3c.dom.Element loaded from parent loader (parentFirst)
Class javax.xml.parsers.ParserConfigurationException loaded from parent loader (parentFirst)
Class org.xml.sax.SAXException loaded from parent loader (parentFirst)
Class java.io.IOException loaded from parent loader (parentFirst)
D:\bbw\build\Common_3.6\Packaged\appserver\build.xml:799: unable to parse the schema. Error messages should have been provided
at com.sun.tools.xjc.XJCTask._doXJC(XJCTask.java:334)
at com.sun.tools.xjc.XJCTask.doXJC(XJCTask.java:283)
at com.sun.tools.xjc.XJCTask.execute(XJCTask.java:227)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:217)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:236)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
BUILD FAILED (total time: 1 second)
Any suggestions? BTW, I did not upgrade NetBeans to v5.5 due that my code is still JDK1.4 based.

Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my images

Try restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

When I open firefox and start browsing, I get error message Firefox has encountered and need to close, we are sorry for inconvinience, if u r middle of something, the information/data might be lost

Firefox has encountered and need to close, we are sorry for inconvinience, if u r middle of something, the information/data might be lost
then two tabs are located, first is send a report and second is dont send
I am getting this error twice in one minute
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Bonjour
J'ai désinstallé Firefox et réinstallé de nouveau
Le problème est le même
Merci de votre aide
Jak

Error in Stock Posting (mb1c)

Hi!
Guru's,
While posting the stock in T-code MB1C i have this error- "Document number Z100(this is my CCode) 1 2007 was already assigned.
I checked in FBN1 (T-code).
Plz solve this error.
Thanks with Regards,
nrk.

Hi,
Can you check material document number range and check the number range, might be clash with other fiscal year.I mean the same number range exist in other year.
Regards,
Chandra

Error in stock posting : 005/2007 period not close in GL 799999 for type S

Similar Messages

Maybe you are looking for