Error in Structure SYST.

Dear All
We are getting error in Structure SYST due to change in field length of domain SYCHAR50 which is used with field MSGV1 in Structre SYST.
Now login to DEV system is not possible due to inconcestencies in System Structure SYST.
Is there any possibility to adjust this structre back to orignal state without login through GUI as login is

Login screen is not appearing , we canot login as this domain is used to interface SAP messages, due to conflict now its not possible to login as message appears at the time of login are not appearing now its just blank screen with no fileds of id and password.
I think the only solution is left to restore the backup.

Similar Messages

Error Parsing Structure File

When I try to access a project that is in RoboSource Control,
I keep getting this error "Error Parsing Structure File". Does
anyone know what this means and how to fix it? Thanks.

See here Dreamweaver CS5 fatal error XML parsing: Invalid document structure, line:1, File: C:\User\Tyler\App

RFC 2 FLAT "Conversion configuration error: Unknown structure" MessageTrans

Hello all,
I want to use MessageTransformBean to map an RFC Call to a FlatFile in Receiver Adapter. As it is not FTP I can't use FCC.
Everytime I start the processing I get the error:
com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Z_FUNCTION' found in document', probably configuration error in file adapter (XML parser error)''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Z_FUNCTION' found in document', probably configuration error in file adapter (XML parser error)'
I implemented everything according to [this|http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm] guide (complex conversion for receiver cc).
I also tried to map the RFC to another XML structure, but the error was the same?
Any ideas?
Best regards,
David

You can probably find answers in these threads:
Error in Receiver FCC: Unknown structure ... found in document
Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'
Error in reciever file content conversion
Regards,
Ravi

'Conversion configuration error: Unknown structure

Hi, my scenario is very simple, Proxy->PI->File and there is no mapping.
There is a report that sends all the data to PI with the proxy and that works OK, but when the file adapter must generate the file I get the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'n:WU_MT_BP' found in document', probably configuration error in file adapter (XML parser error)'
The XML can't be wrong because the MT of the proxy service interface is the same that the MT of the file interface.
In the file content conversion I specified all the structures, with fieldFixedLenghts parameter and endSeparator = 'nl'... I checked those parameters too and they look OK too...

>>Unknown structure 'n:WU_MT_BP
This looks clearly like a content conversion issue.
In file content conversion for recordset structure,have you specified WU_MT_BP?
Is this tag required or it shouldn't be coming in payload in first place.
It is possible that the occurrence of this tag is optional and you may be specified/not-specified content conversion parameters for it.
Thanks
Aamir

Conversion configuration error Unknown structure Header found in document

Hi,
we are having the following target structure according to that we need to generate a file.
Output file sample format:
ACODESXXXX0001581012011-03-2209.12.42WARRANTY CAUSE CODES FILE
ACODESXXXX000158102CCCORROSION INSPECTION
ACODESXXXX00015810255CAVITY, PINHOLE
ACODESXXXX00015810256BAD MACHINING
BCODESXXXX0001581012011-03-2209.12.42WARRANTY COMPLAINTS CODES FILE
BCODESXXXX000158102NCNO CUSTOMER COMPLAINT
BCODESXXXX000158102XPCONSIDERATION
BCODESXXXX00015810299OTHER
BCODESXXXX000158199000000131
CCODESXXXX0001581012011-03-2209.12.42WARRANTY CIRCUMSTANCE CODES FILE
CCODESXXXX000158102 BLANK
CCODESXXXX000158102AAT ENGINE START
CCODESXXXX000158102BWHEN WARMING-UP
Target Record Structure:
DT_Codes
          Record
                    ACodes
                           Header
                           Details
                           Trailer
                     Bcodes
                           Header
                           Details
                           Trailer
                     Ccodes
                           Header
                           Details
                           Trailer
                     TWRNTY
                           Header
                           Details
                           Trailer
In receiver file adapter we have given following content conversion parameters
Content conversion Parameters :
Recordset Structure*: A_Code.Header,A_Code.Detail,A_Code.Trailer,B_Code.Header,B_Code.Detail,B_Code.Trailer,C_Code.Header,C_Code.Detail,C_Code.Trailer,
Name                                                                                value
A_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
A_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,3
A_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
B_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
B_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,10
B_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
C_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
C_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,10
C_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
Now we are getting error "Conversion configuration error Unknown structure Header found in document"
Please suggest solution for the error.
thank you,
Praveen.

your content conversion parameters seem to be wrong.
Do refer;
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion

Plan Driven Procurement - Error message "Structure 01 CP 10170237 CP-S-O

Hi SRM Experts,
Iam seeking your help to avoid error messages in the Plan driven procurement scenario.
I have configured Plan driven procurement scenario as described in the ref. material. The objective of this scenario is transferred PR in EB/SRM should create a entry in sourcing cockpit.
Back end (R/3)configuration steps completed:
1. Entries maintained in V_T160EX, V_T160PR
2. RFC communication established using RFC user
3. As soon as PR (Purchase Requisition) is created from Projects, Network the PR is available in EPRTANS table with Procurement profile.
4. Manually executed PR Transfer program BBP_EXTREQ_TRANSFER
5. Outbound Queue got generated but with below error message.
Error Message: Structure 01 CP 10170237 CP-S-O: No agent found
SRM/EBP Settings maintained:
Direct procurement attribute maintained.
Entry channel created under Company code org. structure
RFC user is assigned to the entry channel.
Assigned Product categories and entries channel to the respective purchase group.
Defined sourcing for product categories.
After maintaining all above configuration, iam still getting error message.
Please provide your expert guidence to complete this scenario setup.
Regards,
Karnati

Hi Nagi,
This is related to Parner determination process with both systems in CRM & ECC.
Error Details: "Partner Function" in CRM is not there in ECC.
We mapped in ECC by creating a ZB copied from "SB" Partner function in ECC & reprocessed the order in CRM, Henceforth rectififed the error.
Many Thanks !!!
Sany.

Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01

Hi,
I was getting following error:
**Error when structuring the index of aggregate 100165 for InfoCube 0TCT_C01
I used this link Please Help me...
I followed all the steps:
1.Delete indexes.
2.Load the InfoCube.
3.Create Indexes.
4.Roll-up of aggregates
but still getting the same error(Roll-up of aggregate is failing).
After the failure if i repeat the step then it gets executed successfully.
I need to monitor the PC ...and at the end of the complition it fails(daily)...
Please can anyone help me on this issue(that why the chain is failing at the roll-up)?

Go to TX RSDDV with your cube an identify the technical ID of ur aggregate (a number 100045 for instance).
TX SE11 goto table RSDDAGGRDIR filter the selection with AGGRCUBE = 100045.
Copy the AGGRUID (something like 3QL29Z7ZLO3BQZDSSLRU0MGOI)
Then come to TX SE37; RSDDK_AGGREGATES_FILL; hit the single test button
I_T_Aggregate enter your AGGRUID
I_T_INFOCUBE enter the techid of your cube
Execute.
This will fill your aggregate.
Hope this will help......
Regards,
Mahesh

Error : Country/structure do not match aplication country

Dear ALL,
We are now on ESS 60.2 on EP6SP13, we are able to view the ESS on EP but not all iview.
Who's who is working , Personal Information has got problem, As in R/3 the reis no service defined for Indian, Let us know how to go abt it
1) We copied a service from some other country and use it .
Error : Country/structure do not match aplication country
com.sap.pcuigp.xssfpm.java.FPMRuntimeException:Country/structure do not match aplication country
2) If we don't assign any country it gives
Error : no service exists
Reg
Amith

Similar kind error has been discussed in the following thread
ESS Configuration Problem

Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01, FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Please Clarify the Errors (Case Structure)

I am using numeric case structure but I don't understand the errors, can anyone clarify what they are mean and what I have to do to change it. Thank you in advance.

(This is a new problem, so you should have started a new thread.)
The solution is simple: Things are case sensitive!
A case labeled "Divide" is different to a case "divide"! Correct the first characer for each case and you're all set.
In scenarios such as this, easiest is to hook up an empty case structure to the radio control, then right-click the case structure and select "Add case for every value". Voila! No chance for mispellings!
Message Edited by altenbach on 08-07-2006 09:49 AM
LabVIEW Champion . Do more with less code and in less time .

Task Creation API is failing in Oracle Projects, Error: A structure version is required.

Hi,
Can anyone seen the below error as we are trying to create the WBS using API. We are using the shared structure.
And can any one have a list of setups need to done in Projects for integrating Primavera using WEB services or SOA.
Thanks in advance.
regards,
Kumar

Hi Kumar,
Please check the link,"docs.oracle.com/cd/E21374_01/doc.31/e20507.pdf " (Page 23)
Regards
Raghavender K
https://www.google.co.in/search?biw=1280&bih=797&q=related:docs.oracle.com/cd/E21374_01/doc.31/e20507.pdf+Oracle+Project+set+up+to+implement+integration+with+P6&tbo=1&sa=X&ei=5HahUozUA8HUrQfd1YH4DA&ved=0CCwQHzAA

After Effects Error: internal structure inconsistency (25::18)

I keep getting this error pop up (After Effects internal structure inconsistency (25::18)), trying to find out what is causing it. Has anyone else has this problem really slowing down my work!!!
I would appreciate the help!
Gonzo

You have not provided any proper technical info and your post is pretty useless. Without knowing some system info, comp settings, effects used and so on nobody can even begin to guess. You have not even told us what version of AE. This particular error often points to issues with CoDecs or using incompatible effects. Beyond that we can't say much.
Mylenium

Oracle 9.2.0.5 to 10.2.0.2 error in structure upgrade

On AIX 5.2 64bit with ECC 5.0 and Oracle 9.2.0.5
Going through guide and notes and have installed software and applied patches and intereim patches. When doing structure upgrade with dbua, I get an error:
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_DATAPUMP" has errors
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_DATAPUMP"
any ideas?

Hi Michael,
I had DBUA problem when I was upgrading Oracle 9.2.0.5 to 10g, but problem got resolved when I upgraded the source to 9.2.0.7. This I was upgrading as SCM upgrade pre-requisite.
One more thing do not forget to increase temp tablespace size and other recommendations of upgrade check sql.
I am sure you will not face problem, if you adopt these things.
If you have still find difficulty, do mail me in [email protected] I have customise upgrade document.
Thanks & Regards
Praveen Verma.

Error : pricing structure for doc type

hi gurus,]
while creating document type"RAILWAY FREIGHT" i have got an error that "CHANGES IN THE PRICING STRUCTURE FOR THE DOCUMENT TYPE RAILWAY FREIGHT PO"

Hi
The statement doesnt look like an error, was it an information message?

Can't delete a page - Error - "Incorrect structure in pdf"

I am unable to delete a page in my pdf (form). I get an error that says - "Incorrect structure in pdf found"....that's it. Can anyone give any insight into this and how I can fix it? I have to delete this page.
Thanks a lot.

I too can't Extract due to- "Incorrect structure in pdf"
Why can't Adobe figure this out then add a button or run command to fix this. I have a 53 page file with fields (and quite a number of fields). I cannot find where the problem is. All of these posts and message never get answered in a straight forward manner. I shouldn't have to go through countless of web pages of possible solutions to include Adobe's forum...... STILL NO ANSWER.
I had to go to an older saved file and redo all the changes. C'mon, if the program tells me that there is an "Incorrect Structure" it should be able to tell me where!!!
I am, as are countless of others, waiting on the solution!
CS 5 will be my last upgrade if Adobe is unresponsive to it's faithful users!

Error in Structure SYST.

Similar Messages

Maybe you are looking for