Error in Sub Chain Master Data - Texts

Text data daily loaded in to 0TRZONE_TEXT.
Daily its not get loading in this.
The Error message is give below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Transfer (IDocs and TRFC): Errors occurred :
Data Package 1 : arrived in BW ; Processing : Error records written to application log

No,All the status are in Green only.
When i am check in ST22
it shows
Name of run time error is : COMPUTE_INT_TIMES_OVERFLOW
and the Exception : CX_SY_ARITHMETIC_OVERFLOW
and also it is a Text load.
it not load into PSA..its direct upload to INFOOBJECT
and also how can i find the error request
Edited by: vino.smarty on Jan 6, 2011 4:51 PM

Similar Messages

Loading error "Master data/Text of Characteristic ZMAT already deleted"

Hi,
I have some problem about SAP BW loading.
while loading I'm getting this error "Master data/Text of Characteristic ZMAT already deleted"
and loading is failing.
So when I try to loading again sometime loading is completed but sometime is failed with this error.
I try to find out root cause and I check table RSMASD there is ZMAT entry this table.
How do I remove the entry?
How can I fixed this problem ??
Now my SAP BW is 3.0 B and support package 26
Hope this helps...
Sumaru

Hi,
Check table RSMASD or SM12 for an entry there.
RSMASD should be blank normally.
SAP Note Number: 936694, 946992 and 936694.
Try
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Re: Data Load Error due to Master data deletion
Hope this helps.
Thanks,
JituK

How to find unassigned master data text objects in process chain in bi

Hi
Please let me know how to find the unassigned master data text objects in process chain.

hi,
actually if u want to find that , is ur Unassigned Infoobject in present in process chain or not, , that u can find out just by right
click on your DTP (master data Txt datasource--> Master data text ), if this is present in Process chain, then on ryt click, the process chain option will be active. by clicking over that u can find the name in which this exists.
thanks.

Error loading master data text

Hi all,
When I does a data load from PSA for master data text,
error appears whcih shows "0OI_PBLTYP : Data record 3 ('INFO') : Language key is initial".
Please tell me why this error.
Hint:I have 17 records in PSA for 11 location types.
11 in English and 6 in German.
Thanks ,
Chintu.

Hi Chintu,
Since you have made the info-object as "language-dependent" the system is looking for lang-key in the data. You can either enter the lang-key in the pSA directly. But if the source system is R/3 my suggestion would be that you pick up the lang-key for the datasource. This would ensure that you dont have to edit the PSA each time you load.
Bye
Dinesh

Master data text load failure?

Hi all,
My process chain for master data text has failed and i am getting the below error message?
error records written to the application log
error 4 in the update.
pls advise me on this what should i do?
thanks
Pooja

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
In your case it is probably because of invalid character issue.
Thanks,
JituK

Master Data Text Used as Line Items in ODS

Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!

Hi Simon, 
Thanks for the reply! 
First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. 
Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? 
However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. 
Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)
Thanks again.

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Master data/text of characteristic ZXVY already deleted

Hi,
while loading master data I am getting this error message and load for the package is failing.
"Master data/text of characteristic ZXVY already deleted."
Please let me know how I can rectify the same.
Thanks
Bhargava

Check if you can remove it from SM12.
If not (because it is not there), one of the notes says that you can write an ABAP code and run it to delete it.
I assume this is production, and you want a quick fix, so you may want to write a one-line code somewhere (for example in an obsolete infopackage - selection type ABAP routine) and run that. Check if you have access to write and test quick abap code somewhere (ie in SE30, or, in infopackage) the code would be something like
delete from rsmasd where CHABASNM ne space.
commit work.
I don't think its a problem if the load is running currently, this lock has existed from earlier so deleting it as soon as you can would be preferred.

Master data text and ods

can i load the master data text and ods parallely?

Hi Abby,
If your ODS contains a characteristic value of an infoobject and you want to load master data (texts and attributes) of this IO, you'd better load master data first (not in parallel), then transaction data.
You can do it in a process chain.
Such a sequence will prevent the possible ODS activation failure.
Best regards,
Eugene

BPC 7.5 NW Master Data Text Node Load with Hierarchy Intervals - Duplicate

Hi,
Does anyone have ideas on how to get past this error (besides a BADI)?
I am loading master data text nodes from a BW hierarchy (say 0COSTCENTER) that has intervals defined for cost center nodes. The problem is that the text nodes fail since there are duplicate values in the hierarchy table.
Master data (dealt by table level) has errors
Detected duplicate member ID 'F100'
Detected duplicate member ID 'F100'
Detected duplicate member ID '1000'
Detected duplicate member ID '1000'
etc...
Thanks!

Hi Virginie,
You should be able to see an example in many threads; look for an example to Restriction of bw infoobect(not mapped to dim)
You can also make a restriction under the InfoObject name when you run the DM package.
Hope this helps,
Gersh

Master data/text of characteristic 0MATERIAL already deleted

Dear BW Experts:
I'm getting this error message when I tried an extraction into an infocube.
"Master data/text of characteristic 0MATERIAL already deleted"
Before the extraction, I've loaded the characteristic 0MATERIAL succesfully.
Can anyone help me? any clues?
Thanks in advance.

Hi All,
We have also received the "Master Data has been deleted" error message. If you delete (or try to delete) the master data for a characterstic, you will get this error message for the next transaction data load. Just mark the failed request to red and back it out from the data targets and then try loading the data again, this time you will not get any error message.
It will only give that error message for the first load after the deletion of master data.
Now coming to the second point. How to delete the master data?
As all of you know, we delete the master data by selecting delete master data from the context menu of an infoobject. This deletes all the master data records that are not currently being used in any of the infoproviders, hierarchies etc. In the system log (transaction SLG1), it will show what are all the records that got deleted and if a record is not deleted it will let you know where that master data is being used.
Now the problem with deleteing master data in this way is, this runs in dialogue mode and if the no of infoproviders and data volume in those infoproviders is huge it will take very long long time to complete you will get a time out message. There is a function module "RSDMD_DEL_MASTER_DATA" , to run this in background you need to create a ABAP program and migrate it all the way to Production and run it in production.
Luckily, there is a SAP delivered ABAP program which we can use to delete master data. That program is "RSDMD_DEL_BACKGROUND", run this program in back ground with the input parameters as mentioned below.
P_IOBJNM - Infoobject name.
P_CHABNM - Infoobject name.
P_DELSID - X
P_DELTXT - X
P_OBJ - RSDMD
P_SUB - MD_DEL
P_EXT - MDDEL_Infoobject name_BG
You can verify in system log, which records got dleted and which are not deleted.

Loading Master data :Text for 0GL_ACCOUNTT

Hi,
I am trying to load master data text from BW 3.5 system to BI 7.0 through Export data source. The data transfer is terminated with the following error meassage.
'In the source system, there is no transfer structure available for
InfoSource 80GL_ACCOUNTT .'
I have selected the check box in the Infoobject Characteristic with the export data source and then replicated the data source in BI 7.0.
Please provide me with suitable solution.

Hello Richa,
Last week I have a problem similar, try to generate 80GL_ACCOUNTT in BI 7.0 first, right clikc in infosource (0GL_ACCOUNTT) -> Generate Export Datasource.
Hope its help..

Master data text after upgrade to NW700 SPS15 (SP17 for SAP_BW)

Basically all the Technical Names with an Underscore _ are replaced by $ symbol.
This issue as depicted here under appeared after the upgrade from BW3.5 to BI7.0, all Master data texts with Underscore __ appears as $
Before upgrade     After upgrade
YACCOUNT___T     YACCOUNT$T
YCHRT_ACT___T     YCHRT_ACT$T
Any body faced this problem.
Regards,
Giridhara

Anyway. I opened a oss message with SAP and they confirmed that RSA1OLD don't work but can only work with RSA1. The problem is at RSA1OLD and when you check dataflow in RSA1OLD, it gives error, while in RSA1, it works. SAP is working on this. Assume that they would correct it later.
Regards,
Giridhara.

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Error in Sub Chain Master Data - Texts

Similar Messages

Maybe you are looking for