Error in SWF_XI_CUSTOMIZING - Configure RFC Destination

Dear Experts,
Basis team is performing PI 7.1(EHP1 - SP04) readiness check. We are not able to activate Configure RFC Destination. Please refer the following attachment.
We have checked if WF-BATCH user got locked. It is fine and in unlocked status. Is there any setting which are missing? Thanks in Advance.
[http://www.flickr.com/photos/49754947@N07/4657473257/]
Thanks,
Phani Akella.

Hi Phani,
Create a RFC connection of type R/3 in the transaction SM59.
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f62cfa8911d386e70000e82011b8/frameset.htm
Or you may go to:
Tcode SM59 -> R/3 connections -> Create
1) Give RFC destination name.
2) Connection type - 3.
3) Technical settings tab -> Target Host -> give the Application Server name -> press enter.
The IP address automatically gets filled up.
4) Logon security tab -> Assign the Logon details.
Also, on the button of the image you posted there is a:
"No Language Can Be Defined for the RFC Destination"
Check for that too.
Regards,
Caio Cagnani

Similar Messages

Configuring RFC destination for control recipe

Hi,
There was a very good document in SDN which explains in detail how an external control recipe destination has to be configured with RFC destinations etc. written by somebody from IBM.
I cant find the document in the forum now.
Can any body please help me on this?
Thanks in advance.

Dear,
Please check these links,
[RFC destination |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c]
[Link2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246]
[LINK3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208c4788-7f02-2a10-da80-bbaf7a202780]
Regards,
R.Brahmankar

CPI-C ERROR CM_PRODU while creating RFC destination from BW to R/3

hi,
i am trying to create connection between R/3 and BW and getting the error -
partner not reached/ CPI-C ERROR CM_PRODU.
could anybody plz. help.
thanks, sunil.

Hi,
I think is because the SAP gateway host is deactivated.
As per SAP notes, issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.
Rgs
Antonino

RFC destination problem in SWF_XI_CUSTOMIZING

Hi,
SWF_XI_CUSTOMIZING
While performing SAP XI customizing (Automatic workflow customizing) on the node Maintain Runtime Environment, the system is asking question like below..
Configure RFC Destination:
RFC user has wrong password. Synchronize password?
Thanks,

Hi Raja,
check the RFC destination from R/3 to XI and XI to R/3....
The Business Process Engine (BPE) processes integration processes at runtime. Since the BPE uses functions of the Workflow Engine and generates workflows from integration processes at runtime, you must customize the Workflow Engine automatically by using transaction SWF_XI_CUSTOMIZING before you can use the BPE.
also check ...
http://help.sap.com/saphelp_nw04/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/5c29eb96803e2be10000000a1553f6/frameset.htm
Regards
Biplab

RFC Destination None Error for MIGO

Hi,
I am getting RFC Destinatnation NONE error while posting Goods Receipt. GTS service for SD and MM is not active. Error showing for FM GRC01_COST_OBJECT_COST.
Can any one help in this regard.
Thanks in advance.
SP Raj

Hi,
Pl find the details below of the error.
Short text
    RFC destination "NONE" does not exist.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCK36" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The 'destination' "NONE" for a Remote Function Call
    is unknown.
    You can display the RFC destinations available in the system using
    the transaction SM59.
Trigger Location of Runtime Error
    Program                                 SAPLCK36
    Include                                 ISAUTO_CK_SAPLCK36============E
    Row                                     812
    Module type                             (FORM)
    Module Name                             PRICE_STRATEGY_NEW
806 ************************************************************************
807 *     DOERNER, GRC, 10/11/1999: Add one new strategy:
808 * 3b. Create costestimate during goods receipt
809 ************************************************************************
810     when 4.
811       if k_debug_loc is initial.
>>>>>         call function 'GRC01_COST_OBJECT_COST' destination 'NONE'
813                 exporting
814                      im_vbeln     = f_mtcom-vbeln
815                      im_posnr     = f_mtcom-posnr

No rfc destination defined for global trade services error while doing migo

Hi all,
Pls help me in fixing the following error..
"no rfc destination defined for global trade services" error while doing migo

i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
Meanwhile, check this note:
Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
Cheers,
Jazz

Charam - System cancel RFC destination SM_GSPCLNT300_TMW, Call BAPI_USER_EX

While configuring charm for my prd rfc im getting following error.
System cancel RFC destination SM_GSPCLNT300_TMW, Call BAPI_USER_EXISTENCE_CHECK: Password logon no longer possible - too many faile d attempts
RFC connection of type SPACE does not exist
RFC connection of type S does not exist
RFC connection of type T does not exist
System cancel RFC destination SM_GSPCLNT300_TMW, Call BAPI_USER_EXISTENCE_CHECK: Password
Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for GSP-300
Any solutions for this

Hi,
Please ensure RFC connection to GSPCLNT300 is working fine. You can go to SM59 to perform authorization testing. User & password set in RFC should match in GSPCLNT300. also, check logon group "SPACE" as well.
Thanks,
Nicholas Chang

Creation of RFC Destination problem

Hi Experts,
I need to establish an RFC communication between TREX7.0 server running on windows 2003 server and the SAPR/3 4.7 EE server running on windows2000.
server. Initially i used TREXAdminTool to create RFC Destination, i was unable to create successfully
Then i used SAPR/3 server from TCODE: SM59, here also am facing the same problem, what are the values i have to give for
1. RFC Destination, 2. Program id 3. Gateway Host and Gateway Service.
PLZ guide me step by step procedure with some example values to create RFC Destination to TREX Server successfully using TREXAdminTool or from SAPR/3 server---SM59
ADV Thanks
Regds
phanikumar

Hi,
Till now i didn't install explicitly any SAP Gateway on TREX server.
I installed TREX server along with SAP Netweaver WEB AS java.
Shall i need to install any SAP Gateway to configure RFC Destination?
If so can you give me the procedure how to install explicitly SAP gateway?
Regds
Phanikumar

System cancel RFC destination - /TMWFLOW/TRACK_N107

Hello Experts,
In ChaRM, when i release transport request from DEV to QAS occurs the error below:
"System cancel RFC destination SM_D01CLNT210_TMW, Call The name or password ins't correct.
Message no. /TMWFLOW/TRACK_N107"
I've checked in the SM59 all connections to DEV and to QAS environment and all are OK.
What's wrong with my ChaRM? Is possible to be a autorization problem?
Thanks to all,
FS.

Hello Fabio
'SM_D01CLNT210_TMW'
check both, the connection test and the authorization test for the RFCs

RFC Destination to test EDI outbound process

Hi,
I am configuring RFC Destination. SAP provides a tool to test EDI outbound process even when EDI subsystem is not actually connected. Do you know what the RFC destination settings should be in this scenario? Thank you.

Hi,
Please check this links perhaps they may help.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/mysap3/sap109.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
Regards,
Ferry Lianto

No defineded RFC destination for global trade service----urgency!!!!

how can i resolve this problem for [STOP] Message, just on one sever, not connect any other R/3 system, when i execute mb1c,input a material information, and try to save the input messages , the system pop up the [stop] error:
 no defineded RFC destination for global trade service
my system enviroment is:
win2003 server + db2 8.2 + sap ecc5

Hi,
When you post an R/3 material document, the processing terminates with a system message indicating that no RFC destination has been maintained for Global Trade Services GTS.
This system message is unjustified since SAP GTS has not actually been activated.
This is caused by a program error.
Please read the notes-825448, and do the necessary corrections.
Hope this helps you out.
Rgds,
Suman

RFC destination error while importing a client request

Dear Experts,
We are trying to import a Client Export from our Prd system to Development System and we are unable to import the request as it pops up a RFC destination error.
We have checked the RFC in the Dev QAS and PRD related to TMSADM and all of them are working fine
FYI, We are able to release the transports from the development system and it can be moved till qas and prd . So the TMS Configuration is also good.
The data file and co file in the backend of development is the same size as that of the Prd system.
I am really stuck . Kindly suggest a solution . Please find the screenshots while importing
Regards,
Suratharajan .S

Hi Suratha,
Goto STMS->system overview and select the Communication tab.
Maintained the Instance number of the ASD system.
Once you maintained the instance number , you will able to see it in the RFC ASD.DOMAIN_ASD.
Also distribute the configuration after entering the instance number.
With Regards
Ashutosh Chaturvedi

RFC destination error in posting 3rd party payment in 4.7 FI system

Hi,
We are running in to a problem when we are processing a payment via transaction F110S in our R/3 4.7 system for Financials. We are integrating our Financial system with ECC6.0 for HCM. We receive 3rd party invoice from HCM successfully via ALE and post it in 4.7 system. When we try to process payment against this invoice, apparently 4.7 system is trying to communicate with ECC 6.0 system and issuing an error and the payment processing gets cancelled. It generates a clearing document with out a check.
The error says "An RFC destination could not be specified for the logical system HD1CLNT014
    Message no. B1550
Diagnosis
    An RFC destination should be specified for the logical system
    HD1CLNT014. This could not be done in this case. HD1CLNT014 is not your
    local logical system and this system is not included in the relevant
    Customizing tables.
Procedure
    Check:
        -   RFC destination
           -Port definition
         -oubound partner profile of message type SYNCH for this logical system
We checked our configuration for all Logical system and RFC destination and everything seems fine.
Any help in this regard is appreciated.
Thanks
Kesav

Hi David,
Did you check below is set-up correctly.
- Use transaction SM59 to create an RFC destinations for the remote system.
- Use transaction BD54 to create the logical system.
- Use transaction BD97 to link the RFC destination created in SM59 with the logical system created in BD54.
Also, check entries in TBLSYSDEST is filled with correct system name HPQCLNT210. Generally this error occurs when system name is incorrect in TBLSYSDEST.
Thanks,
Ameet

RFC destination error in SM58

Hi,
We are getting an error in SM58 "P85040 does not exist".
What could be the reason for this error in PI system?
When I checked, there is no RFC destination configured with the name P85040. Also there is no communication channel configured with the RFC destination parameter P85040.
Kindlly help.
Thanks,
John

Hi John,
The reason can be the host name you are assigning is not existing.
In RFC destination the host name is for that particular client which is pointing to IP address not to the logical system. You can choose name of RFC destination same as of your logical system.
You can get the host name by login to SAP system and the using MENU ... System->Status and in lower right corner you can find it.
Sachin
Edited by: Sachin Dhingra on Dec 18, 2008 1:18 PM

Error in RFC Destination when CAF Application call RFC

I developed a CAF application, where I imported a RFC in "External
Services", like BAPI_FLIGHT_GETLIST, and I mapped it as "Application
Service".
Then for execute this CAF application, I created a RFC Destination in
CE 7.11 SP4 ("http://server:port/nwa/destinations") to configure my ECC
6.0 EHP4 backend.
When I execute the CAF application, in CAF project in NWDS, right click
in Application Service, "Test Service", occurs the follow erros:
com.sap.conn.jco.JCoException: (103) RFC_ERROR_LOGON_FAILURE: This
system rejects all logons using SSO tickets on tecs071 sysnr 00
at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException
(MiddlewareJavaRfc.java:612)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect
(MiddlewareJavaRfc.java:1279)
at com.sap.conn.jco.rt.ClientConnection.connect
(ClientConnection.java:661)
at com.sap.mw.jco.jra.JRA$ManagedConnectionImpl.<init>(JRA.java:3332)
at
com.sap.mw.jco.jra.JRA$ManagedConnectionFactoryImpl.createManagedConnection(JRA.java:2623)
at com.sap.engine.services.connector.jca.ConnectionHashSet.match
(ConnectionHashSet.java:371)
at
com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:330)
at
com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
at com.sap.mw.jco.jra.JRA$ConnectionFactoryImpl.getConnection
(JRA.java:4637)
at com.sap.mw.jco.jra.JRA$ConnectionFactoryImpl.getConnection
(JRA.java:4654)
at
com.sap.caf.demo_sap_com.teste_caf_rfc.external.tecs071.bapi_flight_getlist.BAPI_FLIGHT_GETLISTBean.bapiFLIGHTGETLIST
(BAPI_FLIGHT_GETLISTBean.java:54)
Regards,
Fabiano Rosa
Edited by: Fabiano Rosa on Apr 5, 2010 7:21 PM

Before checking the jco/sso ensure to maintain same destination name in both 'nwa/destinations' and in ide nwds while importing rfc.This also causes error while testing the service.
Thanks,
Murthy.

Error in SWF_XI_CUSTOMIZING - Configure RFC Destination

Similar Messages

Maybe you are looking for