Error in SXMB_MONI AS2--- PI --- ECC

Hi All,
My scenario is AS2---> PI ---> ECC.
I wrote a server proxy and tested, its working fine.
While testing from PI RWB in integration server, messages got processed successfully from PI to ECC.
But I am getiting below error in SXMB_MONI .
Error while parsing an XML stream: 'BOM / charset detection failed&#39
Please assist me how to resolve this error.
Regards,
Saravanan.

it seems some special character causing trouble,down payload from moni and veryfy once.

Similar Messages

AS2 Adapter Error: Error while parsing AS2 message: AUTHENTICATION_ERROR #

Hi,
Following Scenario: Inbound.
i have been receiving messages via Seeburger AS2 Adapter with the following Error message
Error while parsing AS2 message: AUTHENTICATION_ERROR #
I have done the following in the AS2 adapter as per findings in the forum
1. Unchecked the Authentication Required Flag.
2. AS2 Certificates are fine.
3. Use Authentication: Disabled (there is no authentication)
even though every thing seems to be fine i am not able to receive messages successfully. Please let me know what could have gone wrong here.

Hi Venkatesh,
>> Everything is provided in the Sender Agreement. Partners Certificate, Self Encryption & Signing certificate
How come you are using encryption when you are receiving the message. I think it might be decryption.
1. Anyway please cross check whether you provide the following correct details in Sender agreement.
Sender Configuration
Authentication Certificate : Partner's public certificate.
AS2 Receiver Configuration
Decryption Key : Own private key.
Signing Key : Own private key.
2. Can you please check and tell in the Seeburger Monitoring for the incoming message, whether they are sending the message with encryption and signing? This you can check in the Seeburger Monitoring.

I am getting error in SXMB_MONI.

Scenario: file to file using bpm.
I m using namespace http://bpm but when i checking error in sxmb_moni it shows namespace is http://f2f.
i checked end to end and every where i m using namespace http://bpm.I don't know why it show another namespace.
even date and time too same when i testing it in runtime workbench.

I understand that u r using http://bpm and when u tried to check in sxmb_moni, it displays the namespace as http://f2f.
This might occur due to:
1. Might be u have used the same source directory path for both the scenarios.
2. Might be the filenames of the both are same.
If the source directory and the filenames are same, then the poll interval of http://f2f might be less than http://bpm. Please ensure the listed points above.
Try changing the filenames for both the interfaces and check. Ensure that the filename provided for the namespace http://bpm should be filename placed in the directory.

File-XI-IDOC : error in sxmb_moni because of empty idoc

Hi !
I'm converting a CSV file to IDOC segments (CREMAS04).
XI uses a lookup table to convert CSV records to IDOC segments. It is normal that some records could not be converted. When I process a CSV file that has ALL non-convertable records, I get an error in sxmb_moni :
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>MSGGUID 99889D40A4D811DBAD4A0017A4510466: Tag found instead of tag IDOC BEGIN=</SAP:P1>
And the final payload is:
<?xml version="1.0" encoding="UTF-8" ?>
<CREMAS04 />
In the integration repository, the occurance of the complex type CREMAS04 is "1..1", I modified the xsd to minOccurs=0 , maxOccurs=1 , and imported it, but it keeps showing me "1..1"...
How do I deal with these case ?? I don't want error red flags in monitor because of empty idocs...
Thanks.

Hi Bhavesh !
Thanks !
The problem is that because of mapping rules, the value of my target fields is SUPPRESS, not "empty".
For example, I have a file with this records:
A
A
B
A
"B" records should fill an IDOC segment, "A" not.
If I receive a file with only "A" records, for example 48 "A" records...then the IDOC segment, now, is receiving 48 SUPPRESS values...then the mapWithDefault doesn't work because they are SUPPRESS and not EMPTY.
Any ideas?
Thanks,
Matias.

Error in SXMB_MONI for HTML to Webservice Scenario

Hi Experts,
I am facing following error Error in SXMB_MONI for HTML to Webservice Scenario
"Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EmailRequest_To_ValidateEmail_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog."
Only one field is used i.e. email address and mapped properly in IR but still the error is persisting, Please suggest some way out.
Regards,
Nitin

Hi,
Mapping internall follows the SAX parser. Please check if you are trying to process the data of large size.
generally while parsing the large data this exception get raised. Even though there is just one field, what is the data size you are trying to pass.
Thanks
Swarup

Error in SXMB_MONI in SNC

I am getting an error in SXMB_MONI in SNC.
This particular PO has 2 lines exactly on the same product with different delivery dates & different quantities. The first one goes through but the second doesn't.
The error says 'A severe error (ODM: Update error, database) has occurred'. Can anyone help me fix this?

Is there a timing issue ? Can you check if the first PO details are updated and thread/lock is released for next PO to update the dB? Looks like the next PO is trying to update the same thread/instance of dB which the first PO is still working on... try delaying second PO insertion/update to dB
Let us know if it works.
Thanks
Kishore

Error in sxmb_moni when executing

hi all,
i get error in sxmb_moni when executing (monitor for processed xml messages)
the messages states that "system error occured during persist".how to clear this error message.

Hi Allen
Did you configure the right interface mapping in the interface determination? Did you activate your interface mapping? Plz have a look to transaction SXI_CACHE.
this error is beacuse your mapping progrm might be wrong, just check the interface mapping test with mapping program ( it will be error) and with out mapping program ( no error will be there)
cross check your mapping program any madt fields are you missing?
Thanks!

Error in SXMB_MONI -"HTTP_RESP_STATUS_CODE_NOT_OK

Hi all,
In a file to file to scenario, i'm getting this error in SXMB_MONI
Error - " HTTP_RESP_STATUS_CODE_NOT_OK"
503
Service Unavailable
Please provide me the exact solution
Thanks,
Younus

Hi younus,
this should solve ur purpose
INTERNAL.HTTP_RESP_STATUS_CODE_NOT_OK 503
Http* Errors in XI
503 service unavailable
XIServer error raised: 503 Service Unavailable with SOAP Adapter
regards
srinivas

No receiver agreement found Error in SXMB_MONI

Hello all,
I am working sample file to file scenario. after compliteion of my scenario i tested through component monitoring. i got following error in sxmb_moni, No receiver agreement found for sender, But i defined receiver agreement and communication channel, can any body suggest me how can i resolve this problem,
Thanks&Regards,
VenkatK

Dear Venkat,
Once check whether you have defined the correct reciver aggrement. If it is fine, Then delete the receiver aggrement and configure new one and activate it. And test the sceanrio once. I think this may solve ur problem. If the problem exists again, then follow the below steps.
In SAP system, Goto SICF tcode.
1.There you just click execute button or F8.
2.Then expand "Default Host" .(This will be in below the Virtuelle hosts/services)
3.Then expand SAP.
4.Then expand XI.In that just activate all the service elements.Just right click and select activate service.
After this, execute your sceanrio. This will solve your problem.
If Helpful reward points.

403 Forbidden error in SXMB_MONI

Hi guys
I get this error in SXMB_MONI, at the Call Adapter stage
The termination occurred in system ERQ with error code 403 and for the reason Forbidden
Its Quality system. I am able to login to QAS, so while trying to post data into ERQ, I used my username and password in Receiver XI Communication Channel. I checked from SU01 and am not able to find any error there.
The Target Host, Path Prefix and Service Number are correct as I verified that from SMICM of ERQ.
How do I check whether I have the authorization to post data into the QAS system , that's ERQ?
Regards

Are you using Proxy Communication / IDOC Communication???
If Its IDOC, please check RFC destination --> SM59 --> Utilities > Test> Test Authorizations.
If it is Proxy, plz check if HTTP Destination is working fine. And the user has Role 'SAP_XI_APPL_SERV_USER'.
Plz refer link,
[http://help.sap.com/saphelp_nw04s/helpdata/en/d4/d12940cbf2195de10000000a1550b0/frameset.htm]
Regards,
Gouri

Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench

Dear all,
In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen.
Error:
State Error on receive, task will not be retried
"State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seeburger.ediint.edi.EDIMessageException: message decryption failed: failed to decrypt message: provider BC not found"
Imp points to note are:-
1. This error is not specific to one interface. 3-4 interface messages have this error.
2. And even for a particular interface that has this error, we could see that some messages are getting processed without any issues, and some error out, so we are not in a position to conclude anything.
Because of the above issue, many business critical messages are pending to be processed.
If any one has encountered this before error, pls share your inputs to resolve this or any workarounds to temporarily handle the issue will be appreciated.
Thanks,
Younus

Hello Younus,
We are facing exactly same problem in some of our scenarios.
It is strange that this error doesn't occur all the time ,only some messages fail with this error.
I know ,this is a worst approach,but as we couldn't find any solution,we have adopted a workaround to request partner to resend the message and this works well .
Thanks.
Regards,
Shweta

Restart: Outbound Error in SXMB_MONI

Hi ALL
I have an error in SXMB_MONI in outbound status. couldnt see any worklogs in PE also. The message status shows success but error in outbound. Howto restart the message.
1. IP is 0 in sxi_cache
2. CC configuration are correct
thkx
Prabhu

Prabhu,
you cant reprocess the sucessfull processed message by the intergatin server.if need to send the smae data again use you need to change the std report program
RSXMB_SUPPORT_RESTART. you copy this program to u zprogram and commet the following
check if support is requested
perform support restart
using l_imo
execute this and give the GUID of ur processed message it will reprocess it again.
But this not advised one to do it in production or QA envirnoments
Thanks
Sreeram.G.Reddy

Getting error in SXMB_MONI

Hi all,
While doing a scenario where sender is IDOC and Receiver is the Proxy,After triggering the IDOC from the Sender System iam getting the following error in SXMB_MONI.
SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>SC5</SAP:P1>
<SAP:P2>800</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while reading ID of own business system from the SLD for system SC5 and client 800</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
We are getting issue in XI to Receiver System.
Pls suggest in this regard.......

Check
1)if the correct SLD Maintained in SLDAPICUST
2)Check SLDCHECK if there are errors ?
There is probably no business system defined in SLD for your system ID and Current Client
3)Check com.sap.aii.connect.integrationserver.r3.client parameter in exchange profile corresponds to
IS client

Parser Error in SXMB_MONI due to '#1'

Hi all,
In one scenario of JDBC to File mapping, I got an error in SXMB_MONI as follows -
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser : #1 not allowed in Character data sections
In the JDBC channel monitoring, I found that there is one record which contains #1 in one of its elements. However this does not seem to be an issue, because this scenario has been running since many months and such value has been processed in the past also, but this is for the first time that this error has been thrown.
Pls let me know if anyone can help in this.
Regards,
- Shankar

Hi There,
Did you look the error it details, it is telling you that it is a run time error and it is coming from the XML parsing operation associated with the XML processing inside the scenario.
A run time exception can come from multiple context.
1. Due to the run time components
2. Due to run time context data
An XML u are feeding to a well established run time component framework is a context data which is being applied to run time operation.
XML parsing is a rum time operation acting on run time data. Since your scenario is running in daily basis with different type of data, as long as the rumtime context do not work with a specific context data it can through a rum runtime error.
XML parser do serialization and deserialization of data according to the streaming technology and the XSD specification of the message.
Your problem is the XML data u are feeding to the parser through this specific run time instance, nothing has to do with your scenario.
Take out the data
Increase the trace level in DEV instance
Run the scenario with samer DATA
Reproduce the error
Since the TRACE level is high, you will the XML parsing related error in more DETAILS.
Thanks

Mapping Error in SXMB_MONI

Hi,
I am facing a mapping error in SXMB_MONI. When I test Message Mapping and Interface Mapping independently, the test executes successfully, displaying the expected output. However when I execute the scenario as a whole, I get an error in SXMB_MONI saying "Runtime Exception: Different length of queues in SortByKey"
Please help me regarding the same.
Thanks and Regards,
Tejal

Ref. to the help doc statement.
sortByKey -
Like sort, but with two inbound parameters to sort (key/value) pairs. The sort process can be compared to that of a table with two columns.
Using the first parameter, you pass key values from the first column, which are used to sort the table. If you have classified the key values as numeric in the function properties, they must not be equal to the constant ResultList.SUPPRESS. See also: The ResultList Object
Using the second parameter, you pass the values from the second column of the table.
If there is a discrepancy between the number of keys and values, the mapping runtime triggers an exception. The function returns a queue with the values sorted according to the keys.
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm

Error in SXMB_MONI AS2--- PI --- ECC

Similar Messages

Maybe you are looking for